54 resultat (0,26737 sekunder)

Märke

Butik

Pris (EUR)

Nollställ filter

Produkter
Från
Butiker

Rallyman: GT Insert

Rallyman: GT Insert

Insats designad för spel med ytterlådans mått på 29,7 x 29,7 x 7,3 cm. Folded Space har också producerat en liknande Rallyman: DIRT-insats; FS-RMDIRT. Insats kompatibel med Rallyman: GT®, inklusive expansionerna Championship®, Team Challenge®, World Tour®, GT4®, GT5® och Adrenaline Pack®. Designen ger både effektiv lagring och förbättrat spel. Brickorna kan användas under spelets gång, och de underlättar i hög grad uppställnings- och röjningstider. Brickorna är ordnade i upp till tre lager. De sexkantiga spårbrickorna är placerade i två staplar om 24. På ena sidan kan du ersätta brobiten med 14 av brickorna enligt bilden. Den här produkten innehåller också två kartonger för att förvara resten av dina kartbrickor separat. Mer om detta nedan. Insatsen innehåller fack för att lagra och organisera alla spelkomponenter. Det finns individuella spelarbrickor för var och en av de sex spelarfärgerna. Kortfacken har plats för alla kort som kan sleetas. Den lilla påfyllningsbrickan placeras mellan de två travarna av banbrickor för att hindra dem från att röra sig medan de bär spelet eller under vertikal förvaring. Det finns två fack för förvaring av fokuspoletter, vilket gör att en kan placeras på vardera sidan av bordet för att ge enkel åtkomst till alla spelare. Varje bricka rymmer över 100 tokens. Detta är inte tillräckligt för att hålla varenda token från alla expansioner, men det är mer än tillräckligt för användning i dina spel. FS-RMGT innehåller två kartonger för förvaring av alla kartbrickor som inte får plats i huvudspellådan. Dessa kan förvaras på din hylla bredvid spelet och har en tryckt design som passar spellådan. De två tuckboxarna levereras i flatpackform och behöver lite montering. Öppna först lådan och vik tillbaka alla vecklinjer så att lådan står rakt. Därefter måste du passa ihop lådans bottenbitar. Börja med den långa rektangulära biten, följt av sidoflikarna, och sätt till sist in biten med en flik enligt bilden. Vi rekommenderar att du limmar ihop lådans nedre flikar för att förbättra styrkan eftersom kartbrickorna är tunga. Som nämnts ovan kan alla brickor användas under installation och spel. När du packar lådan, placera först skadade token-påsen (med skadepolletterna inuti) mellan de två travarna av spårbrickor enligt bilden. Lägg slutligen regelböckerna ovanpå allt och täck insatsfacken. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. Denna produkt består av ett platt paket med 3 Evacore-ark och två kartonger. Insatsbrickorna och lådorna kräver montering med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert designed for game with external box dimensions of 29.7 x 29.7 x 7.3 cm. Folded Space has also produced a similar Rallyman: DIRT insert; FS-RMDIRT. Insert compatible with Rallyman: GT®, including the Championship®, Team Challenge®, World Tour®, GT4®, GT5®, and Adrenaline Pack® expansions. The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The trays are arranged in up to three layers. The hexagon track tiles are placed in two stacks of 24. On one side you can substitute 14 of the tiles for the bridge piece as shown. This product also includes two cardboard tuck boxes for storing separately the rest of your map tiles. More on this below. The insert includes trays for storing and organising all of the game components. There are individual player piece trays for each of the six player colours. The card trays have space for all cards to be sleeved. The small filler tray is placed between the two stacks of track tiles to stop them moving while carrying the game or during vertical storage. There are two trays for storing the focus tokens, allowing one to be placed on either side of the table to give easy access to all players. Each tray holds over 100 tokens. This is not sufficient to hold every single token from all the expansions, however it is more than enough for use in your games. FS-RMGT includes two cardboard tuck boxes for storage of all the map tiles which don't fit in the main game box. These can be stored on your shelf next to the game, and have a print design in keeping with the game box. The two tuck boxes are supplied in flat-pack form and need some assembly. Firstly open the box and fold back all the crease lines so that the box stands square. You next need to fit the box bottom pieces together. Start with the long rectangular piece, followed by the side flaps, and lastly insert the piece with a tab as shown. We recommend gluing the box bottom tabs together to improve strength as the map tiles are heavy. As mentioned above, all of the trays can be used during setup and game play. When packing the box first place the damage token bag (with the damage tokens inside) in-between the two stacks of track tiles as shown. Lastly place the

SEK 279.00
1

Age of Innovation Insert

Age of Innovation Insert

Obs! Den här produkten är avsedd för en kartongstorlek på 36,5 x 30,0 x 8,3 cm. Insats kompatibel med Age of Innovation. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Tavlor och regelböcker fungerar som ett lock ovanpå brickorna.  Insatsen är arrangerad i upp till tre lager, med stora fyrkantiga brickor för spelarpjäserna på bottenlagret. Det finns sju spelarbrickor. Varje bricka har plats för åtta terrängbrickor med en sida som visar terrängen för spelarens färg. Om du behöver mer kan du ta dem från en av brickorna som inte används. Varje spelarbricka har också plats för en platshållarbricka för ett palats och en 100/200 poängs token.  Den åttonde brickan är för de vita neutrala bitarna och startkompetensbrickorna. Bilagan innehåller en stor bricka för spelkorten, fraktionsbrickor och runda bonusbrickor. Det finns plats för alla kort som ska sleetas. Alla tokens och brickor är uppdelade efter typ. Resursbrickorna kan alla placeras bredvid spelplanen under spelets gång. När insatsfacken är packade i lådan måste du lägga till planeringsskärmarna ovanpå spelarbrickorna.  Lägg sedan till de två små bokbrickorna på vänster sida, tillsammans med regelböckerna. Placera sedan spelplanen, vetenskapsdisplayen och de sammankopplade ytterligare innovationstavlorna ovanpå regelböckerna. Brickorna för visning av turordning och åtgärdsöversikt läggs till i ett enda lager följt till sist av sektionen för innovationsdisplayens bas. När lådan är fulladdad fylls den till toppen, vilket möjliggör vertikal förvaring. FS-AOI är ett inofficiellt speltillbehör från tredje part. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 7 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: This product is intended for a box size of  36.5 x 30.0 x 8.3 cm. Insert compatible with Age of Innovation. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The boards and rulebooks act as a lid on top of the trays.  The insert is arranged in up to three layers, with large square trays for the player pieces on the bottom layer. There are seven player trays. Each tray has space for eight terrain tiles with one side showing the terrain for that player colour. Should you need more you can take them from one of the trays not in use. Each player tray also has space for one palace placeholder tile and a 100/200 point token.  The eighth tray is for the white neutral pieces and the starting competency tiles. The insert includes one large tray for the game cards, faction tiles and round bonus tiles. There is room for all the cards to be sleeved. ll tokens and tiles are split by type. The resource trays can all be placed next to the game board during game play. Once the insert trays are packed into the box you need to add the planning displays on top of the player trays.  Next add the two small book tile trays on the left hand side, together with the rule books. Then place the game board, science display and inter-locking additional innovation display boards on top of the rule books. The turn order display and action overview tiles are added in a single layer followed lastly by the innovation display base section. Once fully loaded the box is filled to the top, allowing for vertical storage. FS-AOI is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 7 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 433.00
1

Founders of Gloomhaven Insert

Founders of Gloomhaven Insert

Denna Campaign 3-insats är designad för att vara kompatibel med Founders of Gloomhaven®. Designen ger både effektiv lagring och förbättrat spel. Brickorna kan användas under spelet, och de underlättar i hög grad uppställnings- och röjningstider. Insatsen är anordnad i tre lager. Alla kort kan sleeves. Det finns separata brickor för byggnaderna i nivå 2 och 3 och två brickor för att dela upp prestigebyggnadsplattorna. Prestigebyggnadsbrickorna är designade så att det är lätt att flytta runt de översta och se titlarna på den andra byggnaden nedan. Brädorna och reglerna ligger ovanpå brickorna och fungerar som ett lock, vilket gör att spelet kan förvaras vertikalt. Först placeras rådgivare/förslagstavla och spelarmattorna i urtaget på insatsens vänstra sida. Detta följs av huvudspelbrädet och sedan resursspårningstavla och regler. Denna produkt består av ett platt paket med 6 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- This Campaign 3 insert is designed to be compatible with Founders of Gloomhaven®. The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in three layers. All cards can be sleeved. There are separate trays for the tier 2 & 3 buildings and two trays to split the prestige building tiles. The prestige building trays are designed so it is easy to move the top ones around and see the titles of the other building below. The boards and rules go on top of the trays acting as a lid, allowing the game to be stored vertically. First the adviser/proposal board and the player mats are placed in the recess on the left hand side of the insert. This is followed by the main game board, and then resource tracker board and rules. This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 317.00
1

Pandemic Insert

Pandemic Insert

Insats kompatibel med Pandemic® och On the Brink®, In the Lab® och State of Emergency®-expansionerna. Designen ger både effektiv lagring och förbättrat spel. Brickorna kan användas under spelet, och de underlättar i hög grad uppställnings- och röjningstider. Insatsen är anordnad i upp till två lager, med de fem petriskålarna på höger sida av lådan. två av petriskålarna placeras ovanpå en del av brickan längst ner till höger på bilden, som används för att lagra pris- och karantänmarkörerna. Var och en av de olika färgade sjukdomskuberna och cur emarkörerna placeras i motsvarande färgade petriskål. Alla komponenttyper är uppdelade efter typ som organiserar alla spelkomponenter. Det finns utrymme för korten att sleetas. Skivorna, regelböckerna och lokaliseringsplattan för bioterrorister måste förvaras separat i en av expansionslådorna. Denna produkt består av ett platt paket med 2 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Pandemic® and the On the Brink®, In the Lab® and State of Emergency®expansions. The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in up to two layers, with the five petri dishes arranged on the right hand side of the box. two of the petri dishes are placed on top of part of the tray on the bottom right of the image, which is used to store the award and quarantine markers. Each of the different colour disease cube and cur emarkers are placed in the corresponding coloured petri dish. All component types are split by type organising all the game components. There is space for the cards to be sleeved. The boards, rule books, and bio-terrorist location pad need to be stored separately in one of the expansion boxes.This product consists of a flat-pack of 2 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 173.00
1

Folded Space Colour Dice Tower

Folded Space Colour Dice Tower

Folded Space Dice Tower version 2, nu i fullfärg! De tryckta Evacore-arken är dubbelsidiga så att du kan välja vilken sida som ska användas externt, vilket ger två olika färgval för det färdiga tornet. Lakanen använder också ett marinblått skum som verkligen matchar färgtrycksdesignen. Dice Tower v2 är ett utmärkt sätt att prova vårt färgtryck Evacore-material och se hur man bygger en av våra produkter. Evacore är mjukt vid beröring vilket gör det utmärkt för förvaring av spelkomponenter, men ger också ett tyst och hållbart tärningstorn. Obs: Tärningstornet utformat för att passa tärningar upp till 25 mm storlek. Produkten består av ett enda tärningstorn och inga tärningar ingår. Denna produkt består av ett platt paket med 2 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Folded Space Dice Tower version 2, now in full colour! The printed Evacore sheets are double-sided so that you can choose which side to use externally, giving two different colour choices for the finished tower. The sheets also use a navy blue foam which really matches the colour print design.The Dice Tower v2 is a great way to try out our colour print Evacore material and see how to build one of our products. Evacore is soft to the touch making it great for storing game components, but also making for a quiet durable dice tower.Note: Dice Tower designed to fit dice up to 25 mm size. Product consists of a single dice tower, and no dice are included.This product consists of a flat-pack of 2 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 221.00
1

Cyclades, and the Titans, Monuments, Hades, Hecate and Ancient Ruins Insert

Cyclades, and the Titans, Monuments, Hades, Hecate and Ancient Ruins Insert

Obs: Insats designad för spel med ytterlådans mått på 39,5 x 27,6 x 8 cm. Insats kompatibel med Cyclades® och expansionerna Titans®, Monuments®, Hades®, Hecate® och Ancient Ruins®. Designen ger både effektiv lagring och förbättrat spel. Brickorna kan användas under spelet, och de underlättar i hög grad uppställnings- och röjningstider. Det finns sex brickor för spelarpjäserna, en per fraktionsfärg. Det finns utrymme i varje för att lagra titanfigurerna från Titans®-expansionen. Brickorna är uppdelade för att förvara erbjudanden, fartyg och territoriumpoletter separat från de andra figurerna. Det finns två brickor för monumentminiatyrerna och en för de odöda figurerna och tärningarna. Den sista brickan är en reservbricka som kan användas för att lagra de fraktionsfärgade tärningarna om du har dem. De sista brickorna är för de stora korten och guldbitarna. Kortfacken är tillräckligt stora för att förvara kort med hylsor, och det finns två separata guldbrickor så att de kan placeras på vardera sidan av brädet under spelet. Brädorna och reglerna ligger ovanpå brickorna och fungerar som ett lock, vilket gör att spelet kan förvaras vertikalt. Det här spelet har många brädor och större brickkomponenter, och det är viktigt att stapla dem på rätt sätt så att locket kan stängas i jämnhöjd med lådans bas. Gå först till de två huvudspelets vikbrädor, som går rygg mot rygg med de mindre vikta bitarna placerade tillsammans. Detta följs av den stora Titans-brädan. Därefter går den vikta gudabrädebrädeförlängningen från originalspelet, med den alternativa gudbrickabrädan ovanpå som visas. Spelarskärmarna och reglerna går sist. Om du har uppgraderingen av tygväskorna kan dessa också läggas till på ena sidan av reglerna som visas på den sista bilden. Denna produkt består av ett platt paket med 6 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for game with external box dimensions of 39.5 x 27.6 x 8 cm. Insert compatible with Cyclades®, and the Titans®, Monuments®, Hades®, Hecate® and Ancient Ruins® expansions. The design provides both efficient storage and improved game play. The trays can be utilised during the game, and they greatly aid set-up and clear-away times. There are six trays for the player pieces, one per faction colour. There is space in each to store the titan figurines from the Titans® expansion. The trays are split to store offering, ship and territory tokens separately from the other figurines. There are two trays for the monument miniatures and one for the undead figurines and dice. The last tray is a spare tray which can be used to store the faction coloured dice if you have them. The last trays are for the large cards and the gold pieces. The card trays are large enough to store sleeved cards, and there are two separate gold trays so that they can be placed on either side of the board during game play. The boards and rules go on top of the trays acting as a lid, allowing the game to be stored vertically. This game has a lot of boards and larger tile components, and it is important to stack them correctly to allow the box lid to close flush with the box base. First go the two main game folding boards, which go back to back with the smaller folded pieces being placed together. This is followed by the large Titans board. Next goes the folded god tile board extension from the original game, with the alternative god tile board on top as shown. The player screens and rules go last. If you have the cloth bags upgrade these can also be added to one side of the rules as shown in the last image. This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 311.00
1

Dominant Species Insert

Dominant Species Insert

Obs: Insats designad för spel med ytterlådans mått på 22,9 x 31,0 x 7,9 cm. Insats kompatibel med Dominant Species®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Brickorna är arrangerade i upp till två lager enligt bilden nedan. Observera att terränghexagonerna är ordnade i två högar på vardera sidan av kortfacket. FS-DOMSP-insatsen fungerar lika bra med Dominant Species: Marine. Insatsen innehåller en bricka för var och en av spelarpjäsens färger, som separerar bitarna efter typ. Kortfacket har tillräckligt med utrymme för sleeved cards. Det finns också en påfyllningsbricka för att hålla de andra brickorna på plats och göra plats för påsen med elementpolletter. När du packar lådan, placera först spelplanen ovanpå brickorna. Detta följs av regelboken och två högar av djuruppvisningarna. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. FS-DOMSP är ett inofficiellt speltillbehör från tredje part. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är förknippade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 3 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for game with external box dimensions of 22.9 x 31.0 x 7.9 cm. Insert compatible with Dominant Species®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The trays are arranged in up to two layers as shown below. Note that the terrain hexagons are arranged in two stacks on either side of the card tray. The FS-DOMSP insert works equally well with Dominant Species: Marine. The insert includes a tray for each of the player piece colours, separating the pieces by type. The card tray has sufficient space for sleeved cards. There is also one filler tray to keep the other trays in place and make space for the bag of element tokens. When packing the box, first place the game board on top of the trays. This is followed by the rule book and two stacks of the animal displays. This fully fills the box and allows for vertical storage of the game. FS-DOMSP is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD.This product consists of a flat-pack of 3 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 239.00
1

Hallertau Insert

Hallertau Insert

Insats kompatibel med Hallertau. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Insatsen är anordnad i upp till fyra lager. Det finns utrymme för alla kort att sleetas. Var och en av de fyra kortlekarna som används under ett spel har sina egna brickor som kan placeras direkt på spelplanen. Sedan lagras de tre gateway- och gårdsdäcken som inte används för närvarande i de större vertikala kortfacken. När du packar lådan placerar du först bygdegårds-, översikts- och juvellådans brickor ovanpå påfyllningsbrickan på höger sida. Lägg sedan de fyra stallbrädorna ovanpå i urtaget som är avsett för dem. Lägg sedan de återstående större brädorna ovanpå brickorna och lägg till sist till regelboken enligt bilden. När den är fulladdad fylls lådan till toppen, vilket möjliggör vertikal förvaring. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Hallertau. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in up to four layers. There is space for all cards to be sleeved. Each of the four card decks used during a game have their own trays which can be placed directly onto the board. Then the three gateway and farmyard decks not currently in use are stored in the larger vertical card trays. When packing the box first place the community center, overview and jewel box tiles on top of the filler tray on the right-hand side. Next place the four stable boards on top in the recess provided for them. Then place the remaining larger boards on top of the trays, and lastly add the rule book as shown. Once fully loaded the box is filled to the top, allowing for vertical storage.

SEK 317.00
1

Rallyman: Dirt Insert

Rallyman: Dirt Insert

Denna produkt är avsedd för en kartongstorlek på 29,7 x 29,7 x 9,2 cm. Folded Space har även producerat en liknande Rallyman: GT-insats FS-RMGT. Insats kompatibel med Rallyman: DIRT®, inklusive expansionerna 110%®, Climb®, Co-Pilot Pack®, R4®, R5® och Rx®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Regelböckerna fungerar som ett lock ovanpå brickorna. Insatsen är anordnad i upp till tre lager. Denna produkt innehåller också två kartonger för att förvara de sexkantiga kartbrickorna separat. Mer om detta nedan. Insatsbrickorna har plats för alla spelkomponenter. Tidskortsfacket har plats för alla kort att hylsa. De två tokenbrickorna på instrumentbrädan har också en extra öppning i änden för extra skadepolletter och de grå syrgas-/moln-/klättringspolletterna. Varje spelare får sin egen bricka för sina färgspelarpjäser, inklusive de tre bilminiatyrerna. De två stora kortfacken har plats för alla kort som ska sleeves, och har stora sidodippar för att ge enkel åtkomst till korten. FS-RMDIRT innehåller två kartonger för förvaring av alla kartbrickor. Dessa kan förvaras på din hylla bredvid spelet och har en tryckt design som passar spellådan. De två tuckboxarna levereras i flatpackform och behöver lite montering. Öppna först lådan och vik tillbaka alla vecklinjer så att lådan står rakt. Därefter måste du passa ihop lådans bottenbitar. Börja med den långa rektangulära biten, följt av sidoflikarna, och sätt till sist in biten med en flik enligt bilden. Vi rekommenderar att du limmar ihop boxens nedre flikar för att förbättra styrkan eftersom kartbrickorna är tunga. När insättningsfacken är packade i lådan måste du placera den skadade token-påsen ovanpå en bunt kort och lägga till de sex instrumentbrädorna ovanpå instrumentbrädans tokenbrickor som visas. Placera sedan helt enkelt alla regelböcker ovanpå bilagan (observera att det bara finns plats för en språkversion av regelböckerna). När lådan är fulladdad fylls den till toppen, vilket möjliggör vertikal förvaring. FS-RMDIRT är ett officiellt speltillbehör. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 6 Evacore-ark och två kartonger. Brickorna och lådorna kräver montering med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- This product is intended for a box size of 29.7 x 29.7 x 9.2 cm. Folded Space has also produced a similar Rallyman: GT insert FS-RMGT. Insert compatible with Rallyman: DIRT®, including the 110%®, Climb®, Co-Pilot Pack®, R4®, R5® and Rx® expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rule books act as a lid on top of the trays. The insert is arranged in up to three layers. This product also includes two cardboard tuck boxes for storing separately the hexagon map tiles. More on this below. The insert trays have space for all the game components. The time cards tray has space for all cards to be sleeved. The two dashboard token trays also have an additional slot at the end for spare damage tokens and the grey oxygen/cloud/climb tokens. Each player recieves their own tray for their colour player pieces, including the three car miniatures. The two large card trays have space for all cards to be sleeved, and have large side dips to give easy access to the cards. FS-RMDIRT includes two cardboard tuck boxes for storage of all the map tiles. These can be stored on your shelf next to the game, and have a print design in keeping with the game box. The two tuck boxes are supplied in flat-pack form and need some assembly. Firstly open the box and fold back all the crease lines so that the box stands square. You next need to fit the box bottom pieces together. Start with the long rectangular piece, followed by the side flaps, and lastly insert the piece with a tab as shown. We recommend gluing the box bottom tabs together to improve strength as the map tiles are heavy. Once the insert trays are packed into the box you need to place the damage token bag on top of one stack of cards and add the six dashboards on top of the dashboard token trays as shown. Then simply place all the rule books on top of the insert (note that there is room for just one langauge version of the rule books). Once fully loaded the box is filled to the top, allowing for vertical storage. FS-RMDIRT is an official game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 6 Evacore sheets and two card tuck boxes. The trays and

SEK 363.00
1

Imperial Settlers & 51st State Insert

Imperial Settlers & 51st State Insert

Denna Campaign 3-inlägg är designad för att vara kompatibel med Imperial Settlers® och aztekerna, Atlanteans, Amazons, Why Can't we be Friends®, 3 är ett magiskt nummer®, We didn't Start the Fire®-expansionerna. Designen ger både effektiv lagring och förbättrat spel. Tokenbrickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Brickorna är ordnade med kortbrickor på sidan och tre lager tokenbrickor i mitten. Dessa är token- och kakelbrickorna. Det finns två fack för förvaring av Atlantiska och Aztekiska tokens. Det finns en lång bricka för varumarkörerna och en annan för förvaring av guld, raze, försvar och andra polletter. Det finns plats för 810 sleeved kort totalt och FFG sleeves har använts vid testning. Dessa brickor har inga baser och är avsedda att förbli i spellådan och inte tas bort. Dessa spelbrädor måste placeras i lådan i följande ordning. Lägg först sex fraktionsbrädor i en fördjupning överst på var och en av de stora kortfacken. Gå sedan poängtavlan och en sjunde fraktionstavla om du har det. Regelböckerna går sist, med den viktigaste överst. Obs - locket kommer att åka högt med 4 mm när det stängs. Detta för att tillåta att korten i hylsan kan lagras vertikalt och brädorna kan förvaras ovanpå. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- This Campaign 3 insert is designed to be compatible with Imperial Settlers® and the Aztecs, Atlanteans, Amazons, Why Can't we be Friends®, 3 is a Magic Number®, We didn't Start the Fire® expansions. The design provides both efficient storage and improved game play. The token trays can be utilised during the game, and they greatly aid set-up and clear-away times. The trays are arranged with card trays down the side and three layers of token trays in the middle. These are the token and tile trays. There are two trays for storing the Atlantean and Aztec tokens. There is one long tray for the goods markers, and another for storing the gold, raze, defense and other tokens. There is space for 810 sleeved cards in total and FFG sleeves have been used in testing. These trays have no bases and are meant to remain inside the game box and not be removed. This game boards need to be placed in the box in the following sequence. First go six faction boards in a recess at the top of each of the large card trays. Then go the score board and a seventh faction board if you have it. The rule books go last, with the main one on top. Note - the lid will ride high by 4 mm when closed. This is to allow the sleeved cards to be stored vertically, and the boards to be stored on top. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 232.00
1

Underwater Cities Insert

Underwater Cities Insert

Insats kompatibel med Underwater Cities® och New Discoveries®-expansionen. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och brädorna fungerar som ett lock ovanpå brickorna. Insatsen har plats för komponenterna i spelet och expansionen, men inte expansionskorten. New Discoveries-korten måste förvaras separat i expansionslådan. Det finns två fack för spelkorten, med en plats för var och en av de tre epokerna och en för de andra korten. Det finns utrymme för alla kort att sleetas med kvalitetshylsor. Brickhörnens design har gjorts för att imitera stadskupolerna från spelet. Det finns två brickor för stadskupolerna i plast, en för varje typ. Det finns två separata brickor för gården, avsaltningsanläggning, laboratorium, tunnel och kreditpoletter. Dessa kan placeras på vardera sidan av spelplanen för att placera dem lätt för alla spelare. Det finns två fack för resurstoken vardera med två fack för 1 och 3 valörpoletter. Det finns en bricka för metropolbrickorna med separata fack för de blå och gröna typerna. Det finns en extra bricka för de andra spelpoletterna. Som nämnts ovan kan många av brickorna användas under spelet för att organisera komponenterna och göra åtkomsten lätt för alla spelare. När du packar lådan, placera först huvudspelbrädet och spelarinformationskort ovanpå insatsfacken. Placera sedan spelarbrädorna, följt av regelböckerna. Detta fyller lådan och möjliggör vertikal lagring av spelet. Som nämnts ovan måste New Discoveries expansionskort förvaras separat i själva expansionslådan. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Underwater Cities®, and the New Discoveries® expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The insert has space for the components of the game and expansion, but not the expansion boards. The New Discoveries boards need to be kept separately in the expansion box. There are two trays for the game cards, with one slot for each of the three eras, and one for the other cards. There is space for all cards to be sleeved with quality sleeves. The tray corners' design has been made to imitate the city domes from the game. There are two trays for the plastic city domes, one for each type. There are two separate trays for the farm, desalination plant, laboratory, tunnel, and credit tokens. These can be placed on either side of the game board to put them in easy reach of all players. There are two trays for the resource tokens each with two slots for the 1 and 3 denomination tokens. There is one tray for the metropolis tiles with separate slots for the blue and green types. There is one additional tray for the other game tokens.As mentioned above many of the trays can be used during the game to organise the components and make access by all players easy. When packing the box, first place the main game board and player info cards on top of the insert trays. Then place the player boards, followed lastly by the rule books. This fills the box and allows for vertical storage of the game. As mentioned above, the New Discoveries expansion boards need to be stored separately in the expansion box itself.This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 235.00
1

Barrage Insert

Barrage Insert

Obs: Insats avsedd för spel med ytterlådans mått på 31,4 x 22,4 x 12,1 cm. Insats kompatibel med Barrage® inklusive The Leeghwater Project® expansion. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelets gång, och de underlättar i hög grad uppsättning och borttagningstider. Insatsen är arrangerad i upp till tre lager enligt bilden, med spelarpjäserna till vänster och andra komponenter på höger hand sida. Varje spelare får två egna brickor för att organisera de olika bitarna för sin fraktion. Myntfacket har extra utrymme för att hålla metallmynten, och grävmaskinen/betongblandaren har extra utrymme för tilläggsseten om du har sådana. Insatsen innehåller en stor bricka för vertikal förvaring av kontraktet, externt arbete, startinstallation och automatplattor. Fackplatserna har extra utrymme för att även hålla kontraktsbrickorna från den 5:e spelarexpansionen. De extra brädorna och hjulet från expansionen kommer dock att lyfta locket på lådan något om dessa också läggs till. När du packar lådan, placera först huvudspelbrädet ovanpå insatsbrickorna, följt av förvaltningstavlan. Därefter placeras de fem företagsstyrelserna och de smala styrelserna. Lägg sedan till konstruktionshjulen, privata byggnadsplattor och executive office-plattor som visas, med patentbyråbrädan ovanpå hjulen. Därefter kommer den extra styrelsen från expansionen, och ovanpå energispåret och spelarhjälpbrickorna. Lägg till sist de tre regelböckerna ovanpå, fyll lådan helt och möjliggör vertikal förvaring av spelet. Denna produkt består av ett platt paket med 6 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for games with external box dimensions of 31.4 x 22.4 x 12.1 cm. Insert compatible with Barrage® including The Leeghwater Project® expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times.The insert is arranged in up to three layers as shown, with the player pieces on the left and other components on the right hand side. Each player gets a two trays of their own to organise the various pieces for their faction. The coin tray has extra space to hold the metal coins, and the excavator / concrete mixer trays have spare space for the add-on sets if you have them. The insert includes one large tray for vertical storage of the contract, external work, starting setup, and automa tiles. The tray slots have adiditoinal space to also hold the contract tiles from the 5th player expansion. The extra boards and wheel from the expansion will slightly lift the lid of the box though if these are also added.When packing the box, first place the main game board on top of the insert trays, followed by the management board. Next place the five company boards and the narrow board extensions. Then add the construction wheels, private building tiles, and executive office tiles as shown, with the patent office board on top of the wheels. Next goes the extra management board from the expansion, and on top the energy track and player aid tiles. Lastly place the three rulebooks on top, fully filling the box and allowing for vertical storage of the game. This product consists of a flat-pack of 6 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 317.00
1

Lost Ruins of Arnak Insert

Lost Ruins of Arnak Insert

Insats kompatibel med Lost Ruins of Arnak®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Brickorna är arrangerade i upp till tre lager, med spelarbrädorna och poängtavlan som visas. Insatsen innehåller fack för att lagra och organisera alla spelkomponenter. Det finns utrymme för alla kort att sleetas med kvalitetshylsor. Brickorna inkluderar en stor tvärbricka som fyller en del av lådan och håller brickorna runt den på plats. Denna bricka kan komma att ersättas med en FS-LRA+-insats i framtiden om det finns en expansion för spelet. Många av brickorna kan användas under spel och installation. De små resursbrickorna kan tas ur lådan och placeras direkt på matningskortet. Andra brickor kan ordnas runt brädan efter behov. Det är enkelt att packa lådan: placera först spelarbrädorna, poängtavlan och de stora markörerna ovanpå korsbrickan. Placera sedan matningskortet på vänster sida i det avsedda urtaget. Lägg till sist huvudspelbrädet och regelboken ovanpå. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. Denna produkt består av ett platt paket med 5 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Lost Ruins of Arnak®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The trays are arranged in up to three layers, with the player boards and score pad arranged as shown. The insert includes trays for storing and organising all of the game components. There is space for all cards to be sleeved with quality sleeves. The trays include one large cross-piece tray which fills one part of the box, holding the trays around it in place. This tray might be replaced with an FS-LRA+ insert in the future if there is an expansion released for the game. Many of the trays can be used during game play and setup. The small resource trays can be taken from the box and placed directly onto the supply board. Other trays can be arranged aorund the board as needed. Packing the box is simple: first place the player boards, scorepad and large markers on top of the cross-piece tray. Next place the supply board on the left hand side in the recess provided. Lastly place the main game board and rule book on top. This fully fills the box and allows for vertical storage of the game. This product consists of a flat-pack of 5 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 317.00
1

Kemet Insert

Kemet Insert

Insatsen är kompatibel med Kemet® och har plats för expansionerna Ta-Seti®, Seth®, C3K Crossover® och promo power kakel. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Tavlor och regelböcker fungerar som ett lock ovanpå brickorna. Insatsen är anordnad i lager. Det finns tre brickor för kraftplattor. Det finns separata platser för att organisera de fyra nivåerna av de fem färgtyperna, och ytterligare utrymmen för kampanjen och andra tilläggseffektbrickor. Det finns två fack för förvaring av kort, en för vertikal förvaring av de små korten och en för förvaring av de stora korten. Observera att de fyra bönepolletterna också förvaras i det stora kortfacket. Alla kort kan förses med kvalitetshylsor. När insatsen är packad i lådan måste du nästa placera den stora spelbrädet ovanpå. Detta följs av den största av de fyra brädorna från Ta-Seti-expansionen och Seth-spelarbrädan. Sedan måste du lägga till staden Seth och Osiris-brädorna. Gå till sist regelböckerna som visas. Detta kommer att fylla rutan till toppen och spelet kan förvaras vertikalt. Om du äger Matagots silkespåsar kan dessa läggas ovanpå brickorna. Insatsen fungerar även om du förvarar dina kraftbrickor i myntfodral. Bilderna nedan antar att arken har klippts till fyra x fyra, och ringpärmhålen har tagits bort. För att lägga till dem i lådan, ta bort två av elbrickorna på insatsens vänstra sida. Genom att vika arken i fyra som bilden visar kan du förvara fem sådana ark i denna plats. Du kan sedan lägga till sidenpåsarna i springan ovanför ärmarna om du har det. Denna produkt består av ett platt paket med 7 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Kemet®, and has space for the Ta-Seti®, Seth®, C3K Crossover®, and promo power tile expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The boards and rule books act as a lid on top of the trays. The insert is arranged in layers. There are three trays for power tiles. There are separate slots for organising the four levels of the five colour types, and additional spaces for the promo and other add-on power tiles. There are two trays for storing cards, one for vertical storage of the small cards, and one for storing the large cards. Note that the four prayer tokens are also stored in the large card tray. All cards can be sleeved with quality sleeves. Once the insert is packed into the box you need to next place the large game board on top. This is followed by the largest of the four boards from the Ta-Seti expansion and the Seth player board. Then you need to add the city of Seth and Osiris boards. Lastly go the rule books as shown. This will fill the box to the top and the game can be stored vertically.If you own the Matagot silk storage bags these can be added on top of the power tile trays. The insert also works if you store your power tiles in coin sleeve sheets. The images below assume the sheets have been cut to size to be four x four, and the ring binder holes have been removed. To add them to the box, remove two of the power tile trays on the left hand side of the insert. By folding the sheets in four as shown you can store five such sheets in this slot. You can then add the silk bags to the gap above the sleeves if you have them. This product consists of a flat-pack of 7 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 317.00
1

Frost Punk Insert

Frost Punk Insert

Obs: Denna produkt är avsedd för en kartongstorlek på 31,8 x 31,8 x 14,3 cm. Insats kompatibel med Frostpunk®, inklusive Frostlander®-expansionen. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Tavlor och regelböcker fungerar som ett lock ovanpå brickorna.  Insatsen är anordnad i upp till fyra lager, med generatorn placerad högst upp i lådan enligt bilden. Påsarna för missnöje och hopp läggs till de två medföljande brickorna. När de är korrekt placerade i lådan håller de generatorn på plats, vilket hindrar den från att röra sig när spelet är i lager. Fälgbrädesbitarna placeras i en stapel i botten av lådan bredvid huvudkortfacket som visas. De två kortfacken är dimensionerade för kort med hylsor. Alla komponenter är sorterade efter typ och byggnadsbrickorna låter dig organisera brickorna och bläddra igenom dem för att få de du behöver. De två resursbrickorna fungerar lika bra med de valfria plastbitarna från Resources Expansion®. Genom att ha två brickor kan de placeras på vardera sidan av bordet vilket ger enkel åtkomst för alla spelare. När du packar lådan, placera först regelboken och scenarioboken ovanpå insatsfacken. Lägg sedan till ansvarsbladen och generatorbrickan. Lägg till sist alla återstående brädor i en enda stack. När den är fulladdad fylls lådan till toppen, vilket möjliggör vertikal förvaring. FS-FPUNK är ett inofficiellt speltillbehör från tredje part. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 8 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: This product is intended for a box size of 31.8 x 31.8 x 14.3 cm. Insert compatible with Frostpunk®, including the Frostlander® expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The boards and rulebooks act as a lid on top of the trays.  The insert is arranged in up to four layers, with the generator placed at the top of the box as shown. The discontent and hope bags are added to the two trays provided. When correctly placed in the box they hold the generator in place, stopping it from moving around when the game is in storage. The rim board pieces are placed in a stack in the bottom of the box next to the main card tray as shown. The two card trays are sized for sleeved cards. All the components are sorted by type and the building tiles trays allow you to organise the tiles and flip through them to get the ones you need. The two resource trays work equally well with the optional plastic pieces from the Resources Expansion®. Having two trays allows them to be placed on either side of the table giving easy access to all players. When packing the box first place the rulebook and scenario book on top of the insert trays. Next add the responsibility sheets and generator tile. Lastly add all the remaining boards in a single stack. Once fully loaded the box is filled to the top, allowing for vertical storage. FS-FPUNK is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 8 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 433.00
1

Clans of Caledonia Insert V2

Clans of Caledonia Insert V2

Obs: Insats designad för spel med ytterlådans mått på 22,4 x 31,1 x 5,0 cm. Insats kompatibel med Clans of Caledonia®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och brädorna fungerar som ett lock ovanpå brickorna. Den reviderade designen fungerar nu med både originalutgåvan och den reviderade utgåvan av spelet, med plats för spelarbräden i båda storlekarna. Med det översta lagret borttaget kan du se det andra lagret av brickor under. Varje klan har sin egen bricka för sina färgade komponenter. Varje spelare kommer att ta en bricka med sin valda färg av klanbitar i början av spelet. Varupolletterna har separata platser för att ge enkel åtkomst under spelet. Det finns en lång bricka för exportkontrakten. Det finns två fack för mynten, en bricka för klanbrickorna och en bricka för portbonusbrickorna, poängbrickor och andra spelpjäser. Myntfacken fungerar lika bra med antingen kortmynten från basspelet eller de alternativa metallmynten. Som nämnts ovan kan många av brickorna användas under spelet för att organisera komponenterna och göra åtkomsten lätt för alla spelare. Spelbrädorna måste placeras i lådan i följande ordning. Lägg först spelarbrädorna i ett urtag på insatsens högra sida. Sedan går reglerna, följt av marknaden och export styrelser. Kartbrädorna och MacDonald-brickan går sist, med spelarhjälpmedel och poängblad bredvid dem. detta fyller lådan till toppen och med locket stängt kan lådan förvaras vertikalt. Insatsdesignen fungerar också med den ursprungliga utgåvan av spelet, där spelarbrädorna är smalare och bara 10 cm breda. När den används med denna utgåva monteras den långa exportkontraktsbrickan annorlunda och placeras tvärtom i lådan enligt bilden nedan. Detta lämnar en smalare fördjupning för de mindre spelarbrädorna. De två alternativa sätten att montera exportkontraktsbrickan kan ses här. Det översta facket i bilden är för den äldre utgåvan av spelet, och den nedre är för den nuvarande utgåvan. Denna produkt består av ett platt paket med 3 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for game with external box dimensions of 22.4 x 31.1 x 5.0 cm. Insert compatible with Clans of Caledonia®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The revised design now works with both the original edition and revised edition of the game, with space for either sized player board. With the top layer removed you can see the second layer of trays underneath. Each clan has it's own tray for its coloured components. Each player will take a tray with his chosen colour of clan pieces at the start of the game. The goods tokens each have separate slots to give easy access during the game.There is one long tray for the export contracts. There are two trays for the coins, a tray for the clan tiles, and a tray for the port bonus tiles, scoring tiles, and other game pieces. The coin trays work equally well with either the card coins from the base game or the alternative metal coins. As mentioned above many of the trays can be used during the game to organise the components and make access by all players easy. The game boards need to be placed in the box in the following sequence. First go the player boards in a recess on the right hand side of the insert. Then go the rules, followed by the market and export boards. The map boards and MacDonald tile go last, with the player aids and score sheet next to them. this fills the box to the top, and with the lid closed flush the box can be stored vertically. The insert design also works with the original edition of the game, where the player boards are narrower being only 10 cm wide. When used with this edition the long export contract tray is assembled differently and is placed the other way round in the box as shown below. This leaves a narrower recess for the smaller player boards. The two alternative methods of assembling the export contract tray can be seen here. The top tray in the image is for the older edition of the game, and the lower one is for the current edition. This product consists of a flat-pack of 3 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 235.00
1

Nucleum Insert

Nucleum Insert

Obs:  Denna produkt är avsedd för en kartongstorlek på 29,7 x 29,7 x 7,1 cm. Officiell fullfärgsinsats kompatibel med Nucleum®, inklusive Nucleum: Australia®-expansionen. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och brädorna fungerar som ett lock ovanpå brickorna. Insatsen är anordnad i upp till två lager med plats ovanpå för brädorna. Observera att när den är fulladdad med spelet och expansionen har lådan plats för bara en huvudspelbräde, så att lägga till Australia-brädet kommer att leda till att locket lyfts. Observera att i spelarbrickorna måste spelarens stadsbyggnadsbrickor staplas i ett hörn. De två experimentbrickorna har plats för de åtta teknikbrickorna per experiment. Du kan alternativt hålla dessa brickor inuti experimentbrädorna, men vi upptäckte att de tenderar att falla ut under lagring. Varje bricka innehåller bilder från regelboken eller spelkort och brädor. Det finns en ovanlig bricka för spelkorten och actionbrickorna. Denna bricka har ingen bas på baksidan där korten hamnar för att ge plats åt kort med hylsor.  Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till i spelet eftersom du omedelbart kan se vad som går vart. När du packar lådan, placera först huvudkortet ovanpå den nedre nivån av brickor. Detta följs av sidotavlan och regelböcker. Lägg sedan spelartavlan ovanpå allt och lägg till sist till experimentbrädorna och de allmänna spelarhjälpmedel som visas. Detta fyller lådan helt utan locklyft (förutsatt en enda huvudspelbräda) och möjliggör vertikal förvaring av spelet. FS-NCLM är en officiellt licensierad skärprodukt tillverkad i samarbete med Board & Dice®. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note:  This product is intended for a box size of 29.7 x 29.7 x 7.1 cm. Official full colour insert compatible with Nucleum®, including the Nucleum: Australia® expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and boards act as a lid on top of the trays. The insert is arranged in up to two layers with space on top for the boards. Note that when fully loaded with the game and expansion the box has room for just one main game board, so adding the Australia board will cause lid lift. Note that in the player trays the player's urban building tiles need to be stacked in one corner. The two experiment tile trays have room for the eight technology tiles per experiment. You can alternatively keep these tiles inside the experiment boards, however we found that they tend to fall out during storage. Every tray includes images from the rulebook or game cards and boards. There is one unusual tray for the game cards and action tiles. This tray has no base on the back where the cards go in order to provide room for sleeved cards.  The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where. When packing the box, first place the main board on top of the lower level of trays. This is followed by the side board and rule books. Next place the player board on top of everything, and lastly add the experiment boards and general player aids as shown. This fully fills the box without any lid lift (assuming a single main game board) and allows for vertical storage of the game. FS-NCLM is an officially licensed insert product made in partnership with Board & Dice®. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 279.00
1

Food Chain Magnate Insert

Food Chain Magnate Insert

Insats avsedd för spel med ytterlådans mått på 31,2 x 22,1 x 5,8 cm. Observera också att när det är fullt laddat lyfts locket med 4 mm. Insats kompatibel med Food Chain Magnate®, eller separat med The Ketchup Mechanism & Other Ideas® Expansion. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Reglerna och spelarmenyerna fungerar som ett lock ovanpå brickorna. Om du äger både spelet och expansionen behöver du två FS-FCM-insatser, en för varje box. Observera att kartbrickorna är placerade i två högar om tio på vänster sida av rutan. Insatsen innehåller fack för att lagra och organisera alla spelkomponenter som visas här. Kortfacken är dimensionerade så att alla kort kan omslutas. När insatsen ska användas i expansionen The Ketchup Mechanism & Other Ideas® har tre av brickorna en alternativ monteringsmetod. Genom att använda dessa variant 2-designer av dessa brickor kan alla expansionskomponenter förvaras och organiseras i expansionslådan. I det här fallet är kartbrickorna ordnade i två högar med tre brickor. Den stora mat- och dryckesbrickan är byggd med högre väggar för att förvara de större bitarna och nya mattyperna. Brickan för sedlar är omarbetad för att lagra polletter och brickor. Och huset och marknadsföringsbrickan är omarbetad utan avdelare så att den kan lagra de större koks- och ölbitarna. Observera att ytterligare sjätte spelares restaurangkedjebrickor och nya marknadsföringsbrickor från The Ketchup Mechanism & Other Ideas®-expansion bör läggas till de relevanta brickorna från basspelet. När du packar lådan, placera först vändbeställningsspåret i urtaget i det stora kortfacket och den största marknadsföringsbrickan ovanpå papperspengarna. Lägg sedan spelarmenyerna i två högar ovanpå brickorna. Om du äger expansionen bör den sjätte spelarmenyn läggas till här också. Lägg sist regelboken ovanpå allt. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. När du använder insatsen för expansionen av Ketchup Mechanism & Other Ideas® placeras plattan på landsbygden ovanpå de mindre nya matbitarna i trä. När den är fulladdad lyfts lådans lock med 4 mm. Detta var oundvikligt när det fanns tillräckligt med utrymme för kort med hylsor i designen. Observera att detta locklyft uppnås förutsatt att lådan endast innehåller en av de två språkuppsättningarna av menyer och regelböcker. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert designed for game with external box dimensions of 31.2 x 22.1 x 5.8 cm. Note also that when fully loaded the lid will lift by 4 mm. Insert compatible with Food Chain Magnate®, or separately with The Ketchup Mechanism & Other Ideas® Expansion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The rules and player menus act as a lid on top of the trays. If you own both the game and the expansion, you will need two FS-FCM inserts, one for each box. Note that the map tiles are placed in two stacks of ten on the left hand side of the box. The insert includes trays for storing and organising all of the game components as shown here. The card trays are sized so that all cards can be sleeved. When the insert is to be used in The Ketchup Mechanism & Other Ideas® expansion three of the trays have an alternative method of assembly. Using these variant 2 designs of these trays all the expansions's components can be stored and organisied in the expansion box. In this case the map tiles are arranged in two stacks of three tiles. The large food and drink tray is built with taller walls to store the larger pieces and new food types. The tray for money bills is re-worked to store tokens and tiles. And the house and marketing tile tray is re-worked without dividers so it can store the bigger coke and beer pieces. Note that the additional sixth player restaurant chain tiles and new marketing tiles from The Ketchup Mechanism & Other Ideas® expansion should be added to the relevant trays from the base game. When packing the box, first place the turn order track into the recess provided in the large card tray and the largest marketing tile on top of the paper money. Next place the player menus in two stacks on top of the trays. If you own the expansion the sixth player menu should be added here too. Lastly place the rule book on top of everything. This fully fills the box and allows for vertical storage of the game. When using the insert for The Ketchup Mechanism & Other Ideas® expansion the rural area tile is placed on top of the smaller new wooden food pieces. When fully loaded the box lid will lift by 4mm. This was

SEK 230.00
1

Istanbul Insert

Istanbul Insert

Obs: Insats designad för spel med ytterlådans mått på 29,7 x 29,7 x 8,8 cm. Detta är den andra versionen av bilagan för Istanbul. nsert kompatibel med Istanbul®, inklusive expansionerna Mocha & Baksheesh® och Letters & Seals®. Insatsen fungerar lika bra med Big Box-varianten av spelet och den vanliga utgåvan (se bilder längst ner på sidan). Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Brickorna är arrangerade i upp till tre lager enligt bilden nedan. Observera att en av de sex små brickorna inte behövs och läggs upp och ned. Insatsen innehåller brickor för att lagra och organisera alla spelkomponenter. Varje spelarfärg har sin egen tokenbricka och alla brickor kan användas under spelet. Det finns utrymme för alla kort att sleetas med kvalitetshylsor. Insatsen innehåller två påfyllningsbrickor. När insatsen läggs till Big Box-varianten av spelet placeras dessa på ena sidan för att hålla de andra brickorna på plats när spelet förvaras vertikalt. När du packar lådan lägger du helt enkelt regelböckerna ovanpå brickorna. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. Insatsen fungerar lika bra med den vanliga utgåvan av Istanbul® (lådans storlek 22,8 x 31,7 x 7,5 cm). Här behövs inte de två påfyllningsbrickorna. Det finns 2,5 cm mellanrum i ena änden av lådan, men förutsatt att denna ände hålls upptill vid vertikal förvaring kommer allt att hållas på plats. När de används med den här versionen av spelet innebär de högre brickorna att det är locklyft på 14 mm när lådan är fulladdad. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for game with external box dimensions of 29.7 x 29.7 x 8.8 cm. This is the second version of the insert for Istanbul. nsert compatible with Istanbul®, including the Mocha & Baksheesh® and Letters & Seals® expansions. The insert works equally well with the Big Box variant of the game and the regular sized edition (see images at bottom of page). The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The trays are arranged in up to three layers as shown below. Note that one of the six small trays is not needed and is added upside-down. The insert includes trays for storing and organising all the game components. Each player colour has it's own token tray, and all the trays can be used during game play. There is space for all cards to be sleeved with quality sleeves. The insert includes two filler trays. When the insert is added to the Big Box variant of the game these are placed at one side to hold the other trays in place when storing the game vertically. When packing the box, simply add the rule books on top of the trays. This fully fills the box and allows for vertical storage of the game. The insert works equally well with the regular sized edition of Istanbul® (box size 22.8 x 31.7 x 7.5 cm). Here the two filler trays are not needed. There is 2.5cm gap at one end of the box, but provided this end is kept at the top when storing vertically, everything will be kept in place. When used with this version of the game the higher trays mean that there is lid-lift of 14 mm when the box is fully loaded.

SEK 317.00
1

Tapestry Insert

Tapestry Insert

Kompatibel med Tapestry, inklusive expansionerna Plans & Ploys, Arts & Architecture och Fantasies & Futures. Obs: Denna produkt är avsedd för en kartongstorlek på 29,7 x 29,7 x 10,0 cm. Observera att detta är en reviderad inlaga för Tapestry. Officiell fullfärgsinsats som är kompatibel med Tapestry, inklusive expansionerna Plans & Ploys, Arts & Architecture och Fantasies & Futures. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Tavlor och regelböcker fungerar som ett lock ovanpå brickorna.  Insatsen är anordnad i två lager, med plats på ena sidan för civilisationen och huvudstadsmattor. Byggbrickorna har två monteringsvarianter beroende på om du äger snap on byggnadsunderlag. Inlägget använder ett beige skum som matchar bra med färgdesignerna från spelet. Kortfacken har alla plats för sleeved cards. I denna monteringsvariant (utan snäppfästen) är alla byggnader separerade efter typ. Varje spelare får sin egen spelarbricka, och territoriumbrickan kan användas för att slumpmässigt fördela dessa brickor med framsidan nedåt istället för att använda påsen från expansionen. Varje bricka innehåller bilder från regelboken eller spelkort och brädor. Spelarbrickorna har ett färgterrängtema på utsidan för att matcha spelarpjäserna inuti. Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till att klara upp spelet eftersom du omedelbart kan se vad som går vart.  När insatsfacken är packade i lådan måste du placera stads- och civilisationsmattorna i en hög ovanpå spelarbrickorna. Lägg sedan huvudspelbrädet ovanpå allt. De mindre brädorna och väskan läggs till enligt bilden. Lägg slutligen regelböckerna och referensguiderna ovanpå allt. När den är fulladdad fylls lådan till toppen, vilket möjliggör vertikal förvaring. Om du äger snap on-baserna för dina byggnader är det bäst att använda den andra varianten monteringsalternativ för byggnadsbrickorna. Snäppen på baserna ökar storleken på byggnaderna så att det blir mindre organisation möjlig i denna variant. Man delar fortfarande upp typerna av byggnader, men det är fler grupperingar än i variant ett. Landmärkebyggnaderna placeras tillsammans i en enda bricka. Monoliten och arenan ligger i en separat bricka tillsammans med tärningarna. FS-TAPEv2 är en officiell insatsprodukt tillverkad i samarbete med Stonemaier Games. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Den här produkten består av ett platt paket med 8 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Compatible with Tapestry, including the Plans & Ploys, Arts & Architecture and Fantasies & Futures expansions. Note: This product is intended for a box size of 29.7 x 29.7 x 10.0 cm. Note this is a revised insert for Tapestry. Official full colour insert compatible with Tapestry, including the Plans & Ploys, Arts & Architecture and Fantasies & Futures expansions. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The boards and rulebooks act as a lid on top of the trays.  The insert is arranged in two layers, with space on one side for the civilization and capital city mats. The building trays have two assembly variants depending upon whether you own snap on building bases. The insert uses a beige foam which matches well with the colour designs from the game. The card trays all have space for sleeved cards. In this assembly variant (without the snap on bases) the buildings are all separated by type. Each player receives their own player tray, and the territory tiles tray can be used to randomly dispense these face down tiles instead of using the bag from the expansion. Every tray includes images from the rulebook or game cards and boards. The player trays have a colour terrain theme on the outside to match the player pieces inside.The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where.  Once the insert trays are packed into the box you need to place the city and civilization mats in a stack on top of the player trays. Next place the main game board on top of everything. The smaller boards and bag are added as shown. Lastly place the rulebooks and reference guides on top of everything. Once fully loaded the box is filled to the top, allowing for vertical storage.If you own the snap on bases for your buildings it is best to use the second variant assembly option for the building trays. The snap on bases increase the sizes of the buildings so that there is less organisation possible in this variant. You still split

SEK 489.00
1

Living Kortspels Insert

Living Kortspels Insert

Obs: Insats avsedd för spel med ytterlådans mått på 25,4 x 29,2 x 7,6 cm. Insats kompatibel med de nya rektangulära lådorna för Living Card Games® som Arkham Horror: The Card Game® The Revised Core Set, The Lord of the Rings: The Card Game® The Revised Core Set, såväl som deras expansioner med samma box storlek. Insatsen är dimensionerad för kort med hylsor, och kommer i två varianter med antingen plats för fler spelkomponenter som väskor och urtavlor, eller med extra kortförvaring. Det finns också en bunt med tre tokenbrickor. En bricka, som kan användas på vardera sidan av lådans ände, har ingen mittavdelare för att ge plats för större brickor och kort i ministorlek. Det stora stora kortfacket har två baser i hörnen för att öka styvheten och göra monteringen enklare. De mindre ändtrågen har alla samma storlek bas och kan bytas ut efter behov. När du monterar insatsen måste du bestämma om du behöver mer utrymme för polletter/urtavlor/väskor eller att lägga till utrymme för ytterligare kort. På så sätt har vi gjort insatsen mer flexibel för en mängd olika spellådor. Variant 1 har plats för totalt 800 sleeved-kort, medan Variant 2 har plats för 900 sleeved-kort. När du packar kartongen lägger du bara till regeln och lär dig att spela böcker ovanpå insatsfacken. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. FS-LCG3-insatsen kan även användas i utbyggnader med samma boxstorlek. Se nedan bilder av inlägget i Edge of the Earth Campaign Expansion®-rutan. Eftersom karaktärens minikort och kaospåsen kommer att finnas i huvudspellådan, rekommenderar vi att du här använder den andra monteringsvarianten för att ge mer utrymme för kort. Huvudkortfacket har dopp i ena änden för att ge plats åt ringpärmen på kampanjguideboken. FS-LCG3 är ett inofficiellt speltillbehör från tredje part. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom, som inte på något sätt är associerade med eller associerade med Folded Space EOOD. Denna produkt består av ett platt paket med 4 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note: Insert designed for games with external box dimensions of 25.4 x 29.2 x 7.6 cm. Insert compatible with the new rectangular boxes for Living Card Games® such as Arkham Horror: The Card Game® The Revised Core Set, The Lord of the Rings: The Card Game® The Revised Core Set, as well as their expansions with the same box size. The insert is sized for sleeved cards, and comes in two variants with either space for more game components such as bags and dials, or with additional card storage. There is also a stack of three token trays. One tray, which can be used be used on either side of the box end, has no middle divider to give space for larger tiles and mini sized cards. The main large card tray has two bases in the corners to add rigidity and to make assembly easier. The smaller end trays all have the same sized base and can be interchanged as needed. When assembling the insert you need to decide whether you need more space for tokens/dials/bags or to add space for additional cards. In this way we have made the insert more flexible for a variety of game boxes. Variant 1 has space for 800 sleeved cards in total, while Variant 2 has space for 900 sleeved cards. When packing the box, simply add the rule and learn to play books on top of the insert trays. This fully fills the box and allows for vertical storage of the game. The FS-LCG3 insert can also be used in expansions with the same box size. See below images of the insert in the Edge of the Earth Campaign Expansion® box. As the character mini cards and chaos bag will be in the main game box, we recommend using here the second assembly variant to provide more space for cards. The main card tray has dips at one end to provide room for the ring binder on the campaign guide book. FS-LCG3 is a third party, unofficial game accessory. All trademarks and copyrights remain the property of their respective owners, which are in no way associated or affiliated with Folded Space EOOD. This product consists of a flat-pack of 4 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 239.00
1

CoraQuest Insert

CoraQuest Insert

Obs:  Insats avsedd för spel med ytterlådans mått på  23,0 x 23,0 x 4,8 cm.  Officiell fullfärgsinsats kompatibel med CoraQuest® och separat kompatibel med Keep on Questing®-expansionen. Designen ger både effektiv förvaring och förbättrat spelande, med löstagbara tokenbrickor för användning under spelet. Regelböckerna fungerar som ett lock ovanpå brickorna. Om du har expansionen behöver du två separata insatser, och även användningen av brickorna är något annorlunda. Se nedan för mer info. Kortfacken är dimensionerade för kort med hylsor. De två öppningarna för stående personer är tillräckligt stora för att de ska kunna läggas till med sina ställ monterade. Observera att den stora chefshälsoratten läggs till i kortplatsen för fiendens ståndare. Varje bricka innehåller bilder från regelboken eller spelkort och brädor. Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till i spelet eftersom du omedelbart kan se vad som tar vägen vart. Observera att brickans baser är vändbara, beroende på om du använder brickan för basspelet eller för expansionen. Se nedan. När du packar lådan lägger du helt enkelt till regelböckerna ovanpå brickorna. Detta fyller hela lådan och möjliggör vertikal lagring av spelet. Om du äger både spelet och expansionen (och därför har två separata insatser) kan du använda bricköppningarna lite annorlunda för att bäst lagra korten och komponenterna. Korten arrangeras om med skatt- och startutrustningslekarna i basspellådan och de återstående kortlekarna i expansionslådan som visas. Standees kan också ordnas om med hjältarna i en plats i basspelet, och de stora bossarna i samma plats i expansionslådan. Tre av de fyra insatsfacken kommer med dubbelsidiga baser - du måste välja vilken sida du vill ha med framsidan uppåt beroende på om brickan ska användas för basspelet eller för expansionen. Dessa bilder visar expansionsbaserna uppåt. FS-CORAQ är en officiellt licensierad insatsprodukt tillverkad i samarbete med Bright Eye Games®. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom. Denna produkt består av ett platt paket med 2 Evacore-lakan. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note:  Insert designed for game with external box dimensions of  23.0 x 23.0 x 4.8 cm.  Official full colour insert compatible with CoraQuest®, and separately compatible with the Keep on Questing® expansion. The design provides both efficient storage and improved game play, with removable token trays for use during the game. The rulebooks act as a lid on top of the trays.If you have the expansion you will need two separate inserts, and also the use of the trays is slightly different. Please see below for more info.The card trays are sized for sleeved cards. The two slots for standees are large enough for them to be added with their stands attached. Note that the big boss health dial is added to the slot for the enemy standees.Every tray includes images from the rulebook or game cards and boards. The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where. Note that the tray bases are reversible, depending upon whether you are using the tray for the base game or for the expansion. Please see below.When packing the box, simply add the rulebooks on top of the trays. This fully fills the box and allows for vertical storage of the game. If you own both the game and the expansion (and hence have two separate inserts) you can utilise the tray slots slightly differently to best store the cards and components. The cards are re-arranged with the treasure & starting equipment decks in the base game box, and the remaining decks in the expansion box as shown. The standees can also be rearranged with the heroes in one slot in the base game, and the big bosses in the same slot in the expansion box. Three of the four insert trays come with double sided bases - you need to choose which side you want face up depending upon whether the tray will be used for the base game or for the expansion. These images show the expansion bases face-up. FS-CORAQ is an officially licensed insert product made in partnership with Bright Eye Games®. All trademarks and copyrights remain the property of their respective owners. This product consists of a flat-pack of 2 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 211.00
1

Gloomhaven: Jaws of the Lion Insert

Gloomhaven: Jaws of the Lion Insert

Obs:  Insats avsedd för spel med yttermått på  23,0 x 29,2 x 10,2 cm. Observera också att detta är vår reviderade bilaga till Gloomhaven: Jaws of the Lion. Insats kompatibel med Gloomhaven: Jaws of the Lion. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Tavlor och regelböcker fungerar som ett lock ovanpå brickorna. Brickorna är ordnade i upp till fyra lager. Alla brickor är i fyrfärgstryck, och två olika färger skum används på de olika arken. En ny karaktärskortfack ersätter tuckboxarna som följer med spelet, som visas här till höger om lådan. Insatsen innehåller fack för att lagra och organisera alla spelkomponenter. Det finns utrymme för alla kort att sleetas med kvalitetshylsor. Varje monstertyp har sin egen plats, och alla fack har färgikoner på trycket för att visa vad som går vart. Det största facket från insatsen är teckenkortsfacket. Detta inkluderar färgkodade områden för vart och ett av de fyra karaktärerna, med separata platser för förmågan och modifierande kortlekar. Insatsen innehåller även ytterligare kortavdelare för att dela upp karaktärslekarna mellan tillgängliga och otillgängliga kort. Dessa använder återigen fullfärgsdesigner från spelets konst. Varje bricka innehåller bilder från regelboken eller spelkort och brädor.  Bilderna förbättrar brickornas utseende avsevärt, men hjälper också till att klarna upp i spelet eftersom du omedelbart kan se vad som går vart. När du packar lådan, placera först karaktärsmattorna och arkunderläggen ovanpå den stora platta monsterkortfacket. Placera sedan stadskartan ovanpå för att täcka alla brickor. De två ringbundna scenarioböckerna placeras med ringpärmarna på motsatta sidor av lådan och med urtavlor och elementtavla mellan dem enligt bilden. Lägg till sist till regelböckerna och klistermärkearket. Detta fyller hela lådan och möjliggör vertikal lagring av spelet.  FS-GLOJAWv2 är en officiellt licensierad produkt tillverkad i samarbete med Cephalofair Games. Alla varumärken och upphovsrätter förblir deras respektive ägares egendom. Denna produkt består av ett platt paket med 5 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Note:  Insert designed for game with external box dimensions of  23.0 x 29.2 x 10.2 cm. Note also that this is our revised insert for Gloomhaven: Jaws of the Lion. Insert compatible with Gloomhaven: Jaws of the Lion. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The boards and rule books act as a lid on top of the trays. The trays are arranged in up to four layers. All the trays are in full colour print, and two different colours of foam are used on the different sheets. A new character card tray replaces the tuck boxes that come with the game, shown here on the right hand side of the box. The insert includes trays for storing and organising all of the game components. There is space for all cards to be sleeved with quality sleeves. Every monster type has it's own slot, and all trays include colour icons on the print to show what goes where.The largest tray from the insert is the character card tray. This includes colour coded areas for each of the four characters, with separate slots for the ability and modifier decks.The insert also includes additional card dividers to split the character decks between available and unavailable cards. These are again using full colour designs from the game's art.Every tray includes images from the rulebook or game cards and boards.  The images greatly improve the look of the trays, but also help in game clear up as you can instantly see what goes where.When packing the box, first place the character mats & sheet pads on top of the large flat monster stat card tray. Next place the city map board on top to cover all the trays. The two ring-bound scenario books are placed with the ring binders on opposite sides of the box and with the dials & element board in between them as shown. Lastly add the rule books and sticker sheet. This fully fills the box and allows for vertical storage of the game.  FS-GLOJAWv2 is an officially licensed product made in partnership with Cephalofair Games. All trademarks and copyrights remain the property of their respective owners. This product consists of a flat-pack of 5 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 363.00
1

Kingdom Death Monster Insert

Kingdom Death Monster Insert

Kompatibel med Kingdom Death Monster®. Observera - insatsen är designad för att passa 1.5-versionen av spelet med kartongmått som anges ovan. Insatsen fungerar bra med den äldre 1.3-versionen, men lådan är cirka 7 mm lägre och i det här fallet kommer locket inte att stänga helt jämnt. Insats designad för spel med ytterlådans mått på 62,8 x 32,5 x 13,5 cm Denna Campaign 2-insats är designad för att vara kompatibel med Kingdom Death Monster®, och insatsen har plats för totalt 1 300 kort i standardstorlek och totalt 440 kugghjulskort. Designen ger både effektiv lagring och förbättrat spel. Alla brickor kan användas under spelet, och de underlättar i hög grad inställningar och röjningstider. Insatsen fungerar tillsammans med FS-KDM+-insatsen för att lagra, förutom huvudspelet, många av spelets expansioner. Med brädor och toppbricka borttagna kan du se under nästa lager av tokenbrickor. Under tokenfacken och brädet syns kortfacken. Dessa är uppdelade för att ha olika lagringskapacitet för de olika typerna av kort. Det finns plats för alla kort att sleetas. Tokenbrickorna har gjorts för att vara enstaka stora brickor. Detta innebär att polletterna snabbt kan tas bort och placeras på spelplanen så att du enkelt kan komma åt kortfacken under. Det finns platser för alla tokentyper och ytterligare platser för tokens och brickor från expansioner. Det finns även brickor för de större terrängplattorna och bosättningshändelsekorten. Korten kan sleeves. Var och en av kortfacken kan lagra kort med hylsor och är gjorda för att kunna tas bort från kartongen vid behov. Åtkomsthålen i brickavdelare är förskjutna så att de svarta kortavdelare som följer med spelet fortfarande kan användas och läsas medan de är i brickan. Kuggkortsfacken kan antingen användas för redskapskort eller för kort i standardstorlek. Det finns ett snitt i sidan av brickan så att korten kan kommas åt. Återigen kan alla kort sleeves med kvalitetshylsor. När brickorna används för de större korten utökas den totala lagringskapaciteten för stora kort till 1 490 kort med hylsor. Det mindre växelkortsfacket kan då användas för att lagra avdelare som inte längre behövs om du lägger dina växelkort i en pärm. Denna produkt består av ett platt paket med 12 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Compatible with Kingdom Death Monster®. Please Note - the insert is designed to fit the 1.5 version of the game with box dimensions listed above. The insert works fine with the older 1.3 version, but the box is approximately 7 mm lower and in this case the lid will not close fully flush. Insert designed for game with external box dimensions of 62.8 x 32.5 x 13.5 cm This Campaign 2 insert is designed to be compatible with Kingdom Death Monster®, and the insert has space for a total of 1,300 standard sized cards and 440 gear cards in total. The design provides both efficient storage and improved game play. All of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert works together with the FS-KDM+ insert to store, in addition to the main game, many of the game's expansions. With the boards and top tray removed you can see underneath the next layer of token trays. Underneath the token trays and board can be seen the card trays. These are split to have different storage capacities for the different kinds of cards. There is room for all cards to be sleeved. The token trays have been made to be single large trays. This means the tokens can be removed quickly and placed on the game board so that you can easily access the card trays underneath. There are slots for all the token types, and additional slots for tokens and tiles from expansions. There are also trays for the larger terrain tiles and the settlement event cards. The cards can be sleeved. Each of the card trays can store sleeved cards, and is made to be removable from the box when needed. The access holes in the tray dividers are off set so that the black card dividers that come with the game can still be used and read while in the tray. The gear card trays can either be used for gear cards or for the standard sized cards. There is a cut in the side of the tray so the cards can be accessed. Again all cards can be sleeved with quality sleeves. When the trays are used for the larger cards, the total storage capacity for large cards is increased to 1,490 sleeved cards. The smaller gear card slot can be used then for storing the dividers no longer needed if you put your gear cards in a binder. This product consists of a flat-pack of 12 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 596.00
1

Stone Age Insert

Stone Age Insert

Insats kompatibel med Stone Age®, inklusive Stone Age: The Expansion® och The Mammoth Herd®. Designen ger både effektiv lagring och förbättrat spel. Många av brickorna kan användas under spelet, och de underlättar avsevärt inställningar och röjningstider. Insatsen är anordnad i upp till tre lager. Observera att tärningskoppen placeras mellan de två påfyllningsfacken i ena änden av lådan, och dessa brickor innehåller även den första spelaren och mammutmarkörerna. Designen fungerar lika bra med Stone Age: Anniversary®-utgåvan, se längst ner på sidan för detaljer. Alla komponenttyper är uppdelade efter typ och organiserar alla spelkomponenter. Det finns utrymme för korten att sleetas. Som nämnts ovan kan många av brickorna användas under spelet för att organisera komponenterna och göra åtkomsten lätt för alla spelare. När du packar lådan, placera först regelböckerna ovanpå brickorna. Detta följs av brädorna, staplade enligt bilden. När den är fulladdad fylls lådan till toppen, vilket möjliggör vertikal förvaring. Som nämnts ovan fungerar insatsen lika bra med Stone Age: Anniversary®-utgåvan av spelet. För att få insatsen att sitta bra behöver du fortfarande Stone Age: The Expansion® för att fylla lådan till toppen med de extra skivorna. Denna produkt består av ett platt paket med 5 Evacore-ark. Brickorna kräver montering, vilket är snabbt och roligt, med vanligt PVA-lim. Detaljerade instruktioner ingår i paketet. --- Vi har massor med spel av alla de slag och även gott om merchandise. --- Insert compatible with Stone Age®, including Stone Age: The Expansion® and The Mammoth Herd®. The design provides both efficient storage and improved game play. Many of the trays can be utilised during the game, and they greatly aid set-up and clear-away times. The insert is arranged in up to three layers. Note the dice cup is placed in between the two filler trays at one end of the box, and these trays also hold the first player and mammoth markers. The design works equally well with the Stone Age: Anniversary® edition, see bottom of page for details.All component types are split by type organising all the game components. There is space for the cards to be sleeved. As mentioned above many of the trays can be used during the game to organise the components and make access by all players easy. When packing the box first place the rule books on top of the trays. This is followed by the boards, stacked as shown. Once fully loaded the box is filled to the top, allowing for vertical storage.As mentioned above, the insert works equally well with the Stone Age: Anniversary® edition of the game. To get the insert to fit well you will still need Stone Age: The Expansion® to fill the box to the top with the extra boards.This product consists of a flat-pack of 5 Evacore sheets. The trays require assembly, which is quick and fun, using ordinary PVA glue. Detailed instructions are included in the package.

SEK 311.00
1