35 results (0,18022 seconds)

Show all filters

Brand

Show all

Colour

Show all

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

US Brass Claire Touch Fastening Bar Shoe Female Black UK Size 7

US Brass Claire Touch Fastening Bar Shoe Female Black UK Size 7

Senior girls back to school shoe in Mary-Jane ballet court pump styling. A semi-formal bow decoration sits on a comfortable rounded toe and finished with a non-slip sporty wedge sole.Senior girls semi-formal school shoeStylish Mary-Jane ballet court pump designStitched down bow feature on the toeAdjustable touch-fasten mid bar strapContoured shaping heel stiffenerComfortable rounded toeSporty energy rebounding low wedge heel and sole

GBP 14.99
1

US Brass Primrose Touch Fastening Bar Shoe Female Black UK Size 7

US Brass Primrose Touch Fastening Bar Shoe Female Black UK Size 7

Girls touch-fasten school shoe in Mary-Jane ballet pump styling. A playful butterfly chases flowers in beautiful stitching accents and fun story telling overlays yet subtly formal for the classroom. A sporty non-slip sole ideal for the playground.Junior girls formal black back to school shoeStylish Mary-Jane ballet court pump designAdjustable touch-fastening mid bar strapChasing butterfly overlay and floral stitching accentsContoured shaping heel stiffenerComfortable rounded toeSporty energy rebounding non-slip sole unit

GBP 11.99
1

TraffiGlove Traffi TG6060 Cut E Waterproof Full Dip Nitrile Glove Pack of 10 - A-TG6060-GR-7

TraffiGlove Traffi TG6060 Cut E Waterproof Full Dip Nitrile Glove Pack of 10 - A-TG6060-GR-7

A flexible, highly dextrous Cut E double dip X-Dura nitrile waterproof glove. The extended cuff provides additional cut protection, comfort, and ensures a secure fit to protect the hand from dirt and debris. A full dip waterproof glove with extra nitrile foam palm for enhanced grip, excellent abrasion and tear resistance in wet and oily conditions. With a yarn made from 12% rPET, this is also a more sustainable option to keep your hands protected. 0

GBP 10.99
1

Ejendals Cut Resistant Gloves, PU Coated, Black/Yellow, Size 7

Ejendals Cut Resistant Gloves, PU Coated, Black/Yellow, Size 7

Cut protection gloves that are 3/4 coated in black polyurethane. Ideal for demanding environments where a high degree of finger dexterity is still needed. Features and Benefits The flexibility of the glove is maintained by the double-dip technique, while the cut-resistant fibers adds extra strength and durability The gloves and versatile and withstand contact heat up to 100C Black polyurethane coating hides soiling improving the gloves lifespan and also makes the gloves oil and grease resistant Anatomically designed to enhance wearer comfort Prevents the risk of cut injuries, abrasion injuries, blisters, grazes, scratches, lacerations and contact with dirt 15 gauge seamless liner Typical Applications Assembly Machine operating Building and construction Carpentry Installation work HVAC installation Airport work Metal work Glass industry Paper industry Warehouse work Standards EN388:2016 4.X.4.3.D

GBP 14.99
1

Beeswift Micro-Fibre Steel Toe S2 Lace-up Shoe Black 7 - CF82307

Beeswift Micro-Fibre Steel Toe S2 Lace-up Shoe Black 7 - CF82307

Beeswift micro-fibre shoe with 200 Joule steel toe cap and shock absorber heel. Anti-Static outsole, to minimise static electricity. Oil and slip resistant outsole for extra grip, with water resistant uppers. The shoe is Washable to 40 Degree C to keep the shoe fresh looking. EN ISO 20345 S2 SRC. 200 Joule steel toe cap Shock absorber heel Anti-Static outsole Oil resistant outsole Slip resistant outsole Water resistant uppers Washable to 40 Degree C EN ISO 20345 S2 SRC

GBP 16.99
1

Polyco Cut Resistant Gloves, with Dyneema Technology, Blue, Size 7

Polyco Cut Resistant Gloves, with Dyneema Technology, Blue, Size 7

These seamless knitted gloves utilise Dyneema technology to deliver high cut resistance. Dyneema is up to 15 times stronger than quality steel and up to 40% stronger than Aramid fibres on weight for weight basis. Features and Benefits Available in two colours for colour-coding requirements Low linting to avoid product contamination Ambidextrous (supplied in singles) for convenient pairing Machine washable up to 95C for extended product life Seamless construction prevents seam on skin irritation Knitwrist cuff style for maximum user comfort Typical Applications Food handling Food preparation Standards CE Category II EN 388:2016 3.X.4.3.D. EN 1186 Food contact approved

GBP 9.29
1

Mapa Professional Cut Resistant Gloves, PU Coated, Blue/Grey, Size 7

Mapa Professional Cut Resistant Gloves, PU Coated, Blue/Grey, Size 7

These high-performance gloves deliver level D cut protection and are ideal for intricate handling in reasonably clean environments. Features and Benefits Close fit design for excellent dexterity Ventilated back to reduce heat build-up for comfort during prolonged use Seamless construction prevents seam-on-skin irritation Flexible material for natural hand movement for minimal hand fatigue Practical colour design for easy cut level identification Silicone-free to prevent product contamination Washable for up to 3 cleaning cycles for extended wear Knitted cuff for maximum user comfort Typical Applications Automotive Technical maintenance Construction Local authorities Plastics industry Standards CE Category II EN 388:2016 4.X.4.3.D. EN 420: Dexterity 5/5

GBP 8.99
1

Portwest FW10 Steelite Protector Boot S1P Size 7

Portwest FW10 Steelite Protector Boot S1P Size 7

The Steelite Protector boot delivers rugged durability in a range of industrial working environments. The split leather upper is resistant to oil and water-based liquids to keep the feet dry and protected in harsh conditions. While the cushioned and flexible sole supports the arch of the foot and reduces pressure on the joints. Features and Benefits Steel toe cap delivers up to 200 Joules of impact protection Anti-static properties help to prevent the build-up of static electricity Steel mid-sole protects against puncture injuries Energy absorbent properties limit foot and joint fatigue Comfortable dual-density sole absorbs shock Slip-resistant outsole keeps you on your feet on both ceramic and steel surfaces PU cushioned midsole delivers plantar support to reduce discomfort during extended shifts Oil-resistant outsole keeps the feet clean and dry Available in a wide range of sizes to suit everyoneStandards CE Certified EN ISO 20345:2011 S1P

GBP 15.99
1

Dunlop Insole Premium Insoles Black Size 7

Dunlop Insole Premium Insoles Black Size 7

An anatomically shaped insole that offers extra support to the foot creating extra stability and reducing fatigue.Dry Feet: absorbs 3 times its own weight.Breathability: superior ventilation so dries quicklyOdour Control: 30% better than regular insolesEnergy absorption: Up to 100% better in comparison to regular insolesStays in shape and in place during the entire lifetimeESD/Anti-static certifiedHeel energy-absorption reduces the impact of every stepMetatarsal support to follow the natural shape of the footArch support to create extra stability

GBP 16.99
1

Ejendals Cut Resistant Gloves, PU Coated, Grey/Yellow Size 7

Ejendals Cut Resistant Gloves, PU Coated, Grey/Yellow Size 7

Foam nitrile/waterbased polyurethane palm coated gloves. The gloves withstand contact heat up to 100C and are ideal for assembly work.Features and Benefits High level of cut protection whilst providing wearers with good fingertip sensitivity Flexible, durable and comfortable, enhancing wearers grip in oily environments Prevents risk of abrasion injuries, blisters, grazes, scratches, lacerations, contact with dirt and drying out 18 gauge seamless linerTypical Applications Food handling Assembly Pulp and paper Glass industry Metal work Construction Logistics Warehouse

GBP 10.99
1

Showa 4561 Nitrile Coated Cut D Gloves Size 7/M

Showa 4561 Nitrile Coated Cut D Gloves Size 7/M

The 4561 nitrile coated glove is an absorbent, cut resistant with ZORB-IT technology, which provides outstanding grip and durability in oily conditions. Suitable industries include automotive, construction, glass, oil & gas and steel & metals. Features and benefits: -Level D cut resistance (EN 388:2016) -Kevlar liner is cut resistant and inherently flame resistant -Lightweight, 15 gauge breathable liner allows warm air and moisture from inside to escape, keeping hands dry and comfortable -ZORB-IT sponge nitrile palm absorbs oil and grease -Resistant to contact heat up to 250C (EN 407:2004)

GBP 12.49
1

Ejendals Cut Resistant Gloves, PU Coated, Black/Yellow, Size 7

Ejendals Cut Resistant Gloves, PU Coated, Black/Yellow, Size 7

For high-level cut protection, these polyurethane gloves are ideal for tough environments where sharp edges may be present. Anatomically designed for a good fit, these gloves offer excellent user comfort and reduced hand fatigue when used for prolonged periods. Features and Benefits The dipping technique ensures the glove is soft and pliable Cut-resistant fibers add extra strength and durability Versatile enough to withstand contact heat up to 100C Provides wearers with good fingertip sensitivity, flexibility, and good grip Typical Applications Assembly Mounting Machine operating Building and construction Engineering HVAC installation Metalwork Glass industry Repair work Service work Standards CE Cat. II EN 388:2016 4X43D EN 407:2004 X1XXXX

GBP 10.99
1

Ejendals 666 Tegera Green/Black Kevlar Gloves - Size 7

Ejendals 666 Tegera Green/Black Kevlar Gloves - Size 7

Delivering level C cut resistance, these 13 gauge gloves are made with a blend of glass fibre thread and Kevlar fibre. Ideal for use in a range of environments, the foam grip pattern allows for confident handling, protecting hands against the risks of burns and cuts and keeping them clean and free from oil and dirt. Features and Benefits Contact heat protection up to 100C to keep hands from burns 13 gauge breathable liner to keep hands cool and comfortable Water and oil resistant neoprene coating protects against contact with liquids Knitwrist cuff for maximum comfort Typical Applications Construction Machine operating Metalwork Hot material handling Automotive MRO Standards CE Category II EN 388:2016 2.X.4.2.C. EN 407:2004 4.1.3.1.0.X.

GBP 17.49
1

Ejendals 8832 Cold Glove (SIZE-7)

Ejendals 8832 Cold Glove (SIZE-7)

Protect yourself in cold and wet environments with the TEGERA cold protection and Level D cut protection glove. Providing superior defence against the elements and high-level cut protection with CRF technology, these gloves are ideal for all-round tasks. The 10-gauge construction guarantees durability, while the latex-dipped, sandy finish offers a secure grip, warmth, and comfort. Features and Benefits Resilient against contact heat up to 250C for safe handling applications Water-repellent palm and knuckle for versatile protection Guards against cut injuries, scratches, lacerations, dirt, moisture, and cold Typical Applications Building construction General construction tasks Machine driving operations Standards PPE CAT II EN 388:2016+A1:2018 2.X.4.2.D EN 407:2020 (No flame protection) X.2.X.X.X.X EN ISO 21420:2020 EN 511:2006 1.2.X

GBP 16.39
1

Ansell 11-423 Size 7, 0 Mechanical Protection Gloves

Ansell 11-423 Size 7, 0 Mechanical Protection Gloves

Constructed using high performance, high visibility fibres, and Techcor Knitting Technology, these water-based gloves are made using an environmentally friendly process. Coated with INTERCEPT cut-resistant technology, these gloves offer excellent abrasion and cut resistance during medium-duty tasks. Features and Benefits Resilient due to heat resistance up to 100C Seamless 13 gauge liner for reduced irritation during prolonged use Silicone-free, reducing allergy risks Water and oil-repellent treatment on both liner and coating Typical Applications Automotive Metal fabrication Machinery and equipment Handling parts with sharp, rough edges Adjusting systems and screwing Assembly Standards CE Category III EN388:2003 4.X.3.2.B. EN388:2016 4.3.3.2 EN407 X.1.X.X.X.X. Approvals REACH compliant Suitable for food handling Warnings Contains natural rubber proteins which may cause irritation or skin allergies in some users Notes Previously known as PuretoughP3000

GBP 10.29
1

Ejendals Tegera Full Grain Goatskin Gloves White Yellow Size 7

Ejendals Tegera Full Grain Goatskin Gloves White Yellow Size 7

The industry benchmark for TIG welding leather gloves, these TEGERA 126A gloves are extremely resistant to heat. The design offers superior comfort and flexibility thanks to the top quality, full-grain goatskin, 0.7mm-thin and unlined inner and the long cuff. Each glove is finished with an elasticated wrist for a better fit and a KEVLAR seam for extra durability. Available in a variety of sizes.Features and Benefits KEVLAR thread in the seams which resists 427 C short-term heat exposure (max operating limit) and 204 C longer-term heat exposure (constant operating limit) Withstands contact heat up to 100C for user protection Reinforced index finger for durability Heat-resistant sewing thread Extremely good fingertip sensitivity allowing you to work with smaller components Extra flexible and conformable whilst offering optimum protectionTypical Applications Welding Glassworking ManufacturingStandards EN 388:2016, 2111X EN 407:2004, 412X4X

GBP 12.99
1

Ejendals 8806 Infinity Cut 5 PU 3/4 Coated Glove Size 7

Ejendals 8806 Infinity Cut 5 PU 3/4 Coated Glove Size 7

These super-light cut-resistant gloves are widely used in precision assembly work in wet and oily environments. Double-dipped for enhanced protection, the blend of CRF technology and stainless steel fibre liner delivers excellent resistance to mechanical injuries, including cuts, lacerations, and blisters. Features and Benefits Foam grip pattern provides good wet and dry grip, still allowing excellent tactility Designed to withstand contact heat up to 100C to protect against burns Flexible material allows for natural movement and reduces hand fatigue Anatomically designed for an excellent fit with good dexterity Seamless liner for a reduced seam on skin irritation Lightweight 15 gauge CRF technology liner for maximum user comfort Knitwrist cuff for maximum user comfort Typical Applications Food handling Assembly Pulp and paper Glass industry Metalwork Construction Logistics Warehouse Standards CE Category II EN 388:2016 4.X.4.2.B. EN 407:2004 X.1.X.X.X.X. Approvals Food handling approved

GBP 11.49
1

Showa SHO320 GP-KV1 Latex Ctd Glove (S)

Showa SHO320 GP-KV1 Latex Ctd Glove (S)

Keep hands protected against cuts and abrasion injuries with the GP-KV1 gloves from Showa. Lined with cut-resistant Aramid fibre, the natural latex coating delivers excellent grip in both wet and dry working environments. Features and Benefits Seamless knit design prevents seam to skin contact for reduced irritation The antibacterial treatment inhibits odour causing bacteria to form for improved hygiene The uncoated glove back maintains breathability, reducing the build-up of perspiration and improving user comfort Flexible design allows for excellent movement and reduced hand fatigue Rough finish on the latex coating improves grip and mechanical handling Typical Applications Aerospace Automotive Construction Glass industry Mechanical Utilities Metallurgy Standards CE Category II EN388:2016 3.X.4.3.C. Warnings Does not protect against thermal, electrical, and chemical hazards Do not use where there is a risk of machine entanglement Notes 10 gauge Kevlar liner Wipe clean with a damp cloth

GBP 15.99
1

Ansell 11-571 HyFlex Cut D Nitrile Palm Coated Glove (SIZE-7)

Ansell 11-571 HyFlex Cut D Nitrile Palm Coated Glove (SIZE-7)

HyFlex 11-571 stands as the lightest ISO D/ ANSI A4-rated cut-resistant glove, offering 20% greater durability compared to standard EN ISO D/ ANSI A4-rated gloves and the previous technology version. With an ultra-lightweight design, it ensures enhanced comfort without compromising on protection. The improved FORTIX Technology provides up to 20% more abrasion resistance, making these gloves last longer in abrasive conditions. Developed with INTERCEPT Cut Resistance Technology using Next Generation HPPE single yarn, these gloves achieve EN ISO D/ ANSI A4 standards for cut resistance, offering 2x more cut protection compared to similar gloves made of standard HPPE yarn. Additionally, they are touchscreen compatible and ESD, allowing the wearer to use multiple touchscreen devices while keeping the gloves on.Features and Benefits Ultra-lightweight design EN ISO D / ANSI A4 cut protection Thumb crotch reinforcement Ideal for dry and slightly oily applications

GBP 13.99
1