Electrostatic Powder Coating Machine
This electrostatic powder coating machine has a large 45L powder capacity, which means it's great for big projects. The T-Mech machine is fully portable, has an easy to navigate control panel and comes with a 12 month electrical warranty!
Powder coating is used to create a durable and high quality finish, which is great for tough machinery! Power coated products are more resistant to corrosion, fading and chipping so when done correctly it should last a very long time.
Powder coating is a dry finishing process using powder particles that are electrostatically charged and sprayed onto grounded metal work. After the coating is applied, you need to cure the parts using a powder coating curing oven.
Powder coating machines are used in a range of industries including auto parts, medical equipment, home appliances and much more!
Powder Coating Machine
* Product features:
* Easy to navigate control panel
* Includes 1 spray gun
* Comes on wheels making it fully portable
* 12 month electrical warranty
* CE Approved
* Dimensions: 74cm (H) x 65cm (W) x 50cm (D)
* Free next working day UK mainland delivery Specifications:
* Input Power Voltage: 220V - 230V AC
* Frequency: 50Hz-60Hz
* Input Power: 40W
* Electromagnetic valve control power voltage: 24V DC
* Input Air Pressure: 0-0.6Mpa
* Output Air Pressure: 0-0.5Mpa
* Max. Air Consumption: 13.2m3/h
* Output Powder Volume: Max. 600g/min
* Output Powder Voltage: 0-100KV
* Output Current: 0-150uA
* Powder Hopper Volume: 45L Electrical data
* Nominal input voltage: 200-240V
* Rated output voltage (to gun) : 24V
* Rated output current (to gun) : 1.2A
* Protection type: IP54
* Temperature range: 0 C -+40 C (+32 F - +104 F)
* Solenoid Valve Voltage: DC24V
* Gun output voltage: 0-100KV
* Gun output current: 0-150uA Pneumatical data
* Max.input pressure: 0.8Mpa
* Min.input pressure: 0.5Mpa
* Output pressure: 0.8Mpa
* Max.water vapour content of the compressed air: 1.3g/m3
* Max.oil vapour content of the compressed air: 0.1mg/m3
* Max.compressed air consumption: 13.2m/h0.4MPa) Gun Parameter
* Input: 24V
* Voltage Frequency: Around 25KHZ
* Input Current: 1.2A
* Output Voltage: 0~100KV DC
* Max.Output powder volumeAround 600G/MIN
* Gun cable: 6M
* Gun weight: 460G
* Container Capacity: 45L Operating Instructions
Powder coating should be undertaken by an experienced and competent person. This is in no way an exhaustive and complete guide of how to Powder Coat/Cure.
* You should wear a Tyvek suit/coveralls and gloves to protect your hands and skin. Eye protection and a dust mask should be worn at all times.
* Clean the base metal thoroughly and remove any rust or debris from the metal
* Use a high temperature masking tape on the parts you don't want to be powder coated, this can be left on whilst in the oven but needs to be removed quickly afterwards
* Turn on the power supply switch and the indicator light should come on
* Adjust the voltage to what is required using the dials on the control panel
* Place powder into feeding barrel
* Press the switch of spray gun and adjust to high voltage
* Apply powder using spray gun
* After applying the powder, be careful not to brush or blow on the powder coat as the powder could fall off and leave you with a less precise finish
* Cure the metal using a powder coating curing oven, normally the object is heated to 175 to 190C (350 to 375F) for about 10 to 15 minutes, and allowed to cool
