124 results (0,18644 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

PolyX Rafter Bar End Bar Self Supported - 2.5mtr White

PolyX Rafter Bar End Bar Self Supported - 2.5mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 94.63
1

PolyX Rafter Bar End Bar Self Supported - 3mtr White

PolyX Rafter Bar End Bar Self Supported - 3mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 113.47
1

PolyX Rafter Bar End Bar Self Supported - 3.5mtr White

PolyX Rafter Bar End Bar Self Supported - 3.5mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 132.41
1

PolyX Rafter Bar End Bar Self Supported - 4mtr White

PolyX Rafter Bar End Bar Self Supported - 4mtr White

Our PolyX Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 170.59
1

PolyX Rafter Bar Intermediate Bar Self Supported - 6mtr White

PolyX Rafter Bar Intermediate Bar Self Supported - 6mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 174.26
1

PolyX Rafter Bar Intermediate Bar Self Supported - 3.5mtr White

PolyX Rafter Bar Intermediate Bar Self Supported - 3.5mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 101.65
1

PolyX Rafter Bar Intermediate Bar Self Supported - 4mtr White

PolyX Rafter Bar Intermediate Bar Self Supported - 4mtr White

Our PolyX Rafter Bar (Intermediate) for a Self Support System is used to join and support two polycarbonate sheets - fixing to a wall plate at one end and eaves beam at the other.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position. Each bar comes complete with one end cap.

GBP 118.54
1

Soffit Board - 405mm x 10mm x 5mtr Agate Grey Woodgrain - Pack of 2

Soffit Board - 405mm x 10mm x 5mtr Agate Grey Woodgrain - Pack of 2

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a woodgrain finish in agate grey.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 156.60
1

Soffit Board - 225mm x 10mm x 5mtr White Woodgrain - Pack of 2

Soffit Board - 225mm x 10mm x 5mtr White Woodgrain - Pack of 2

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a woodgrain finish in chartwell green.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 99.36
1

Soffit Board - 405mm x 10mm x 5mtr Anthracite Grey Smooth

Soffit Board - 405mm x 10mm x 5mtr Anthracite Grey Smooth

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a smooth finish in anthracite grey.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 92.98
1

Soffit Board - 405mm x 10mm x 5mtr Chartwell Green Woodgrain - Pack of 2

Soffit Board - 405mm x 10mm x 5mtr Chartwell Green Woodgrain - Pack of 2

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a woodgrain finish in chartwell green.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 156.60
1

Soffit Board - 300mm x 10mm x 5mtr Chartwell Green Woodgrain - Pack of 2

Soffit Board - 300mm x 10mm x 5mtr Chartwell Green Woodgrain - Pack of 2

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a woodgrain finish in chartwell green.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 121.50
1

Soffit Board - 350mm x 10mm x 5mtr Anthracite Grey Smooth

Soffit Board - 350mm x 10mm x 5mtr Anthracite Grey Smooth

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a smooth finish in anthracite grey.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 89.56
1

Soffit Board - 200mm x 10mm x 5mtr White Woodgrain - Pack of 2

Soffit Board - 200mm x 10mm x 5mtr White Woodgrain - Pack of 2

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a woodgrain finish in chartwell green.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 93.96
1

Soffit Board - 225mm x 10mm x 5mtr Chartwell Green Woodgrain - Pack of 2

Soffit Board - 225mm x 10mm x 5mtr Chartwell Green Woodgrain - Pack of 2

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a woodgrain finish in chartwell green.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 99.36
1

Soffit Board - 300mm x 10mm x 5mtr White Woodgrain - Pack of 2

Soffit Board - 300mm x 10mm x 5mtr White Woodgrain - Pack of 2

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a woodgrain finish in chartwell green.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 121.50
1

Soffit Board - 405mm x 10mm x 5mtr White Woodgrain - Pack of 2

Soffit Board - 405mm x 10mm x 5mtr White Woodgrain - Pack of 2

Freefoamand#039;s plain soffit board are 5-metres in length and have a thickness of 10mm with straight edges.This soffit comes in a woodgrain finish in chartwell green.Soffit boards are used to close the gap at the eaves between the rear of the fascia board and the wall.For a visual explanation, please take a look at our short video which explains which parts go where in the roofline construction.Soffit boards are non-load bearing.

GBP 172.80
1

200mm White Woodgrain Fascia Board - 18mm x 5mtr - Pack of 2

200mm White Woodgrain Fascia Board - 18mm x 5mtr - Pack of 2

18mm replacement fascias do not require a backing board - they are a straight replacement for old timber fascias, as they are nailed directly onto the rafter feet.The industry name for replacement fascias can appear misleading, as nowadays these boards are commonly used on new build projects.Our white woodgrain finish fascia boards are available in a wide range of widths including 175mm, 200mm andamp; 400mm.The return leg on the board is slightly rebated to accept a soffit board.

GBP 119.40
1

175mm Chartwell Green Woodgrain Fascia Board - 18mm x 5mtr - Pack of 2

175mm Chartwell Green Woodgrain Fascia Board - 18mm x 5mtr - Pack of 2

18mm replacement fascias do not require a backing board - they are a straight replacement for old timber fascias, as they are nailed directly onto the rafter feet.The industry name for replacement fascias can appear misleading, as nowadays these boards are commonly used on new build projects.Our chartwell green woodgrain finish fascia boards are available in a wide range of widths including 175mm, 200mm andamp; 400mm.The return leg on the board is slightly rebated to accept a soffit board.

GBP 110.15
1

200mm Chartwell Green Woodgrain Fascia Board - 18mm x 5mtr - Pack of 2

200mm Chartwell Green Woodgrain Fascia Board - 18mm x 5mtr - Pack of 2

18mm replacement fascias do not require a backing board - they are a straight replacement for old timber fascias, as they are nailed directly onto the rafter feet.The industry name for replacement fascias can appear misleading, as nowadays these boards are commonly used on new build projects.Our chartwell green woodgrain finish fascia boards are available in a wide range of widths including 175mm, 200mm andamp; 400mm.The return leg on the board is slightly rebated to accept a soffit board.

GBP 119.40
1

175mm White Woodgrain Fascia Board - 18mm x 5mtr - Pack of 2

175mm White Woodgrain Fascia Board - 18mm x 5mtr - Pack of 2

18mm replacement fascias do not require a backing board - they are a straight replacement for old timber fascias, as they are nailed directly onto the rafter feet.The industry name for replacement fascias can appear misleading, as nowadays these boards are commonly used on new build projects.Our white woodgrain finish fascia boards are available in a wide range of widths including 175mm, 200mm andamp; 400mm.The return leg on the board is slightly rebated to accept a soffit board.

GBP 110.15
1

300mm Dark Grey Smooth Fascia Board - 18mm x 5mtr

300mm Dark Grey Smooth Fascia Board - 18mm x 5mtr

18mm replacement fascias do not require a backing board - they are a straight replacement for old timber fascias, as they are nailed directly onto the rafter feet.The industry name for replacement fascias can appear misleading, as nowadays these boards are commonly used on new build projects.Our dark grey smooth finish fascia boards are available in a wide range of widths including 150mm, 175mm, 200mm, 225mm, 250mm andamp; 410mm.The return leg on the board is slightly rebated to accept a soffit board.

GBP 110.72
1