110 results (0,18708 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

FloPlast 175mm White Fascia Capping Board - 9mm x 5mtr

FloPlast 175mm White Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 16.64
1

FloPlast 150mm White Fascia Capping Board - 9mm x 5mtr

FloPlast 150mm White Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 14.92
1

FloPlast 100mm White Fascia Capping Board - 9mm x 5mtr

FloPlast 100mm White Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 14.53
1

Hollow Soffit Board - 300mm x 10mm x 5mtr White

Hollow Soffit Board - 300mm x 10mm x 5mtr White

Our 10mm hollow soffit boards can be used either lengthways or cut into short pieces used side by side with the grooves running back to the wall - this is the most common method.To calculate how many lengths of hollow soffit you will need when using it in short sections, first measure the soffit gap in millimetres (the gap between the fascia and the wall). Divide 5000mm by this number. This will give you the number of pieces that you will get out of each full 5m length. Now multiply this by 300 and the resulting number is the length in mm along the wall that these pieces will cover.Example - soffit width is 200mm.5000 / 200 = 25.25 x 300 = 7500, so one length of 300mm hollow soffit will cover 7.5m.Hollow soffit is secret fixed through the tongue of each board using 30mm cladding nails or countersunk screws.

GBP 12.00
1

FloPlast Rosewood Fascia Capping Board External Corner - 300mm

FloPlast Rosewood Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 9.48
1

FloPlast Golden Oak Fascia Capping Board External Corner - 300mm

FloPlast Golden Oak Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 9.48
1

FloPlast Anthracite Grey Fascia Capping Board External Corner - 300mm

FloPlast Anthracite Grey Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 9.48
1

FloPlast Black Ash Woodgrain Fascia Capping Board External Corner - 300mm

FloPlast Black Ash Woodgrain Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 9.48
1

Bullnose Fascia 135 Degree Internal Corner - 327mm x 50mm White

Bullnose Fascia 135 Degree Internal Corner - 327mm x 50mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This corner is 327mm long.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 9.34
1

Bullnose Fascia 135 Degree External Corner - 327mm x 50mm White

Bullnose Fascia 135 Degree External Corner - 327mm x 50mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This corner is 327mm long.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 9.34
1

Ogee Fascia Corner Double Ended - 500mm White

Ogee Fascia Corner Double Ended - 500mm White

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.andnbsp;Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 12.02
1