38 results (0,17753 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Hollow Soffit H Trim - 5mtr Dark Grey Smooth

Hollow Soffit H Trim - 5mtr Dark Grey Smooth

Hollow soffit H trims are used for a clean finish when joining two 5-metre fixed hollow soffit boards with the grooves running parallel to the brickwork and can be used horizontally or vertically. Freefoamand#039;s hollow soffit H trims are 5-metres long and finished in a smooth dark grey.Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 15.13
1

Hollow Soffit H Trim - 5mtr Storm Grey Smooth

Hollow Soffit H Trim - 5mtr Storm Grey Smooth

Hollow soffit H trims are used for a clean finish when joining two 5-metre fixed hollow soffit boards with the grooves running parallel to the brickwork and can be used horizontally or vertically. Freefoamand#039;s hollow soffit H trims are 5-metres long and finished in a smooth storm grey (RAL 7045).Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 15.13
1

Hollow Soffit J Trim - 5mtr Storm Grey Smooth

Hollow Soffit J Trim - 5mtr Storm Grey Smooth

Hollow soffit J trims are the most common starter trim option and are fixed with polytop pins or screws.The longer side of the J trim should be fixed to the underside of the batten fixed to the wall, or the underside of the soffit bearers. Freefoamand#039;s hollow soffit J trims are 5-metres in length and are finished in a smooth storm grey (RAL 7045).Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 12.10
1

Hollow Soffit J Trim - 5mtr Dark Grey Smooth

Hollow Soffit J Trim - 5mtr Dark Grey Smooth

Hollow soffit J trims are the most common starter trim option and are fixed with polytop pins or screws.The longer side of the J trim should be fixed to the underside of the batten fixed to the wall, or the underside of the soffit bearers. Freefoamand#039;s hollow soffit J trims are 5-metres in length and are finished in a smooth dark grey.Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 12.10
1

Hollow Soffit F Trim - 5mtr Storm Grey Smooth

Hollow Soffit F Trim - 5mtr Storm Grey Smooth

Hollow soffit F trims are used as a starter or edging trim and are placed upside down with the slot facing the house. It is recommended to check it is level every 3 feet by placing a level across the gap that lies between the fascia board and siding to ensure it is accurate.Freefoamand#039;s hollow soffit F trim is 5-metres in length and is coated in a smooth storm grey (RAL 7045).Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 13.38
1

Hollow Soffit F Trim - 5mtr Dark Grey Smooth

Hollow Soffit F Trim - 5mtr Dark Grey Smooth

Hollow soffit F trims are used as a starter or edging trim and are placed upside down with the slot facing the house. It is recommended to check it is level every 3 feet by placing a level across the gap that lies between the fascia board and siding to ensure it is accurate.Freefoamand#039;s hollow soffit F trim is 5-metres in length and is coated in a smooth dark grey.Freefoam SoffitsA lightweight range of solid and hollow soffits that are designed to work with the fascia range (and all other size variants.)It is recommended to use Freefoamand#039;s P30 or P40 Plastop Plastic Headed Pins for soffits.Freefoamand#039;s soffit boards are BS EN 13245-2:2008 certified.

GBP 13.38
1

Weatherboard Cladding Universal Edge Trim - 3mtr Sand

Weatherboard Cladding Universal Edge Trim - 3mtr Sand

The Weatherboard Cladding Universal Edge Trim is a one-piece channel used at the edges of cladding installations to hide any cut edges of boards and seal the installation.Designed to make the installation neat, the universal edge trim is 3 metres in length and can be used in conjunction with 170mm weatherboard cladding.This trim is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand.

GBP 14.32
1

Weatherboard Cladding Universal Edge Trim - 3mtr White

Weatherboard Cladding Universal Edge Trim - 3mtr White

The Weatherboard Cladding Universal Edge Trim is a one-piece channel used at the edges of cladding installations to hide any cut edges of boards and seal the installation.Designed to make the installation neat, the universal edge trim is 3 metres in length and can be used in conjunction with 170mm weatherboard cladding.This trim is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand.

GBP 14.32
1

Bullnose Fascia 135 Degree Internal Corner - 327mm x 50mm White

Bullnose Fascia 135 Degree Internal Corner - 327mm x 50mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This corner is 327mm long.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 9.34
1

Bullnose Fascia 135 Degree External Corner - 327mm x 50mm White

Bullnose Fascia 135 Degree External Corner - 327mm x 50mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This corner is 327mm long.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 9.34
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Black Ash Woodgrain

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Black Ash Woodgrain

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.02
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Golden Oak

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Golden Oak

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.02
1

FloPlast Fascia Bargeboard Finial - 340mm Golden Oak

FloPlast Fascia Bargeboard Finial - 340mm Golden Oak

Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.To enable the barge boards to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.This rule should be always applied to any corner or joint cover on any PVC fascia installation.

GBP 10.58
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Anthracite Grey

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Anthracite Grey

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.02
1

FloPlast Fascia Bargeboard Finial - 340mm Black Ash Woodgrain

FloPlast Fascia Bargeboard Finial - 340mm Black Ash Woodgrain

Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.To enable the barge boards to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.This rule should be always applied to any corner or joint cover on any PVC fascia installation.

GBP 10.58
2

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Rosewood

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Rosewood

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 11.02
1

FloPlast Fascia Bargeboard Finial - 340mm Rosewood

FloPlast Fascia Bargeboard Finial - 340mm Rosewood

Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.To enable the barge boards to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.This rule should be always applied to any corner or joint cover on any PVC fascia installation.

GBP 10.58
1

Anthracite Grey Fascia Capping Board External Corner - 300mm

Anthracite Grey Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.67
1