Fremgang.nu | Google Ads-bureau

White Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim. 50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 1.05

1

Rosewood Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 3.81

1

Black Ash Fascia Capping Board End Cap - 50mm

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.50mm end caps are most commonly used when the board itself is being used as an internal window board rather than a fascia board.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 3.81

1

White Fascia Capping Board Joint - 300mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.59

1

White Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.66

1

White Fascia Capping Board Internal Corner - 300mm

Internal corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. Internal corners are usually found at the foot of a valley on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Internal corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.54

1

White Fascia Capping Board Double End Joint - 500mm x 42mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.16

1

White Fascia Capping Board Double End Corner - 500mm x 42mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.37

1

White Fascia Capping Board External Corner Joint Trim - 135 Degree x 300mm

135 Degree corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. 135 degree corners (or 45 degree corners as they are also called) are usually found above a bay window on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.All corner trims can be cut to size with a standard hacksaw or fine toothed saw

GBP 3.73

1

Fascia End Cap - 315mm White

End caps are used to seal off the cellular core of any cut board that is exposed, ie. where it is not covered by a joint or corner trim.End caps can be cut to size with a hacksaw as required. They are fixed to the end of the board using our industrial superglue and activator.

GBP 3.00

1

Flat Fascia Double Ended Joint Trim - 600mm White

These joint trims are used to join two lengths of flat fascia board together in a neat and seamless fashion.

GBP 3.96

1

Flat Fascia Double Ended Corner Trim - 600mm White

These joint trims are used to join two lengths of flat fascia board together at a 90 degree angle in a neat and seamless fashion.

GBP 3.96

1

Bullnose Fascia Internal Corner - 300mm x 53mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This corner is 300mm long.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 2.93

1

Bullnose Fascia Large End Cap - 300mm x 25mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This end cap is 313mm long overall, with a 300mm useable length (one curved edge).Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 2.54

1

Bullnose Fascia End Cap Pair - 100mm x 25mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This end cap is 100mm long overall, consisting of a pair of end caps.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 1.34

1