202 results (0,19411 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Mitsubishi VL100EU5-E Lossnay Wall Mounted Single Room MVHR

Mitsubishi VL100EU5-E Lossnay Wall Mounted Single Room MVHR

Mitsubishi VL100EU5-E Lossnay Wall Mounted Single Room MVHR Unit (wall switch model) Product Part Number Losney VL-100 Wall Mounted Single Room MVHR unt (wall switch model) - VL-100EU5-E Description Mitsubishi VL-100EU5-E single room heat recovery unit for field supplied external wall switch. The wall mounted VL-100EU5-E is an efficient single room heat recovery unit for residential homes and small offices that require fresh, clean air and the removal of stale air with minimal heat loss. NOTE: The VL-100EU5-E has the option to fit a field supplied external wall switch. A wall switch for speed control is not supplied with the unit. Recommended switch option 'Quiet-Vent Rocker Switch".   Technical Features Up to 80% Heat recovery   106 m3 h/r max flow Sound pressure (dBA) 25 – 37 Weight 7.5kg Dimensions W/D/H (mm) 620/ 200/ 265 2 x 75 (mm) spigots (ID)

GBP 299.10
1

Panasonic Smart Wall Mounted Fan Coil

Panasonic Smart Wall Mounted Fan Coil

Panasonic Smart Wall Mounted Fan Coil Product Part Number Panasonic 200 Smart wall mounted fan coils - PAW-AAIR-200-2 Panasonic 700 Smart wall mounted fan coils - PAW-AAIR-700-2 Panasonic 900 Smart wall mounted fan coils - PAW-AAIR-900-2 Description Bring year-round heating and cooling to any room with the Panasonic Smart fan coil. The Smart fan coils look like a stylish wall radiator but can supply superior heating and cooling from a low temperature heat pump and be controlled by a built-in touch screen thermostat. Specially designed for use with our range of Panasonic heating and cooling air to water heat pumps to provide high efficiency climate control. With automatic control of passive heating or the use of up to 4 fan speeds a quiet but effective enables high airflows to be achieved with low pressure loss and low noise levels. The slimline design of less than 13cm and the choice of 3 models makes the smart fan coils perfectly designed to adapt to any installation including residential applications, hotels, shops, restaurants, and offices.   Dimensions Model Height Width Depth Weight 200-2 735mm 579mm 129mm 17kg 700-2 935mm 579mm 129mm 20kg 900-2 1135mm 579mm 129mm 23kg

GBP 886.98
1

Quiet-Vent 2 in 1 External Wall Grille

Quiet-Vent 2 in 1 External Wall Grille

2 in I external wall grille The 2 in 1 external terminal wall grille combines the outdoor air and exhaust air connection in one compact product Manufactured of stainless steel with options of powder coating in white (RAL9010) and Black (RAL9005)- Designed to allow installation of external pipes in a compact location with minimal air recirculation Available in duct diameter connections 125mm, 150mm 180mm Key features Time and space saving Stainless steel construction 125,150, 180mm connections Male spigots at rear for superior airtightness Four fixing holes for wall mounting Easy to disassemble for easy installation Compact solution Minimal airflow recirculation Low pressure loss Rain protection Optional White or Black powder coating* *Powder coating is recommended in areas of salt corrosion Dimensions QV-2IN1SSG-125    L-522 x H-273 x W-92 QV-2IN1SSG-150    L-522 x H-273 x W-92 QV-2IN1SSG-180    L-602 x H-322 x W-120

GBP 160.14
1

Wall Mounted Plug and Play CO2 Sensor with traffic Light Signals

Wall Mounted Plug and Play CO2 Sensor with traffic Light Signals

Wall mounted plug and play CO2 sensor with traffic light signals Product Part Number Wall Mounted Plug and Play CO2 Sensor - PZ-70CSW-E Description They allow the indoor air quality of a room to be kept safe and fresh by regularly measuring the CO2 levels and adjusting airflows accordingly, ensuring that stale air is removed from the space and fresh air is introduced in an energy efficient manner. Powered directly from the Lossnay's power supply, both sensors offer simple installation and are commissioned digitally on the PZ-62DR-E Lossnay controller for tailored monitoring and control.

GBP 381.93
1

Zehnder ComfoAir 185 WM for wall or cupboard mounting

Zehnder ComfoAir 185 WM for wall or cupboard mounting

Description Zehnder ComfoAir 185 WM - CA185WM-GB The Zehnder ComfoAir 185 WMe is a wall mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard Sap Appendix Q listed with (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems,   Key features- Zehnder ComfoAir 185 WM Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 92% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor SFP as low as 0.57 wls Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed   Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed   Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation Wall bracket is included with unit Special pod wall / cupboard mounting option available, ideal for secure fixing during pod transportation Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G3 filters are fitted to the unit that are easy to replace Summer By-Pass The Zehnder range of units have a 100% summer by-Pass Low Noise Levels Heat Exchanger

GBP 1857.77
1

Flat Master 2000L Wall Mounted Positive Input Ventilation System

Flat Master 2000L Wall Mounted Positive Input Ventilation System

Product Part Number FLAT Master 2000L - FLAT2000L Description The Flatmaster solution has been specifically designed to ventilate homes without lofts and is recommended for planned and reactive ventilation servicing. Suitable as a social housing ventilation solution, the system introduces air into the home at a continuously low rate, eliminating condensation dampness and forcing out indoor pollutants such as Radon gas and carbon monoxide. Allergens are kept to a minimum and outdoor pollutants such as pollen and traffic fumes are kept out. The results are a fresh and healthy indoor environment. Cures Condensation - Reduces humidity in the air, curing condensation dampness and preventing mould growth Healthy Living Environment - Removes both indoor and outdoor pollutants from the home, overall improving indoor air quality High Efficiency - Extremely low power consumption as low as 3 watts per hour Meets Regulations - Meets Part F & L of Building Regulations as a low-energy ventilation strategy Ideal For Apartments - Designed to ventilate homes without lofts, the unit is compact and be concealed away in a convenient location 5 Year Warranty - 1 year parts and labour, remaining years parts only. Technical Specifications: The Flatmaster 2000L is designed to take fresh air from outside, clean the air, and discharge it into the central hallway via a system of ducting. The unit is usually situated in a convenient location, such as a kitchen cupboard or hallway. The unit is designed to take fresh air from outside, filter the air and discharge it into the central hallway via a system of ducting. The unit is usually situated in a kitchen, airing cupboard or hallway, and is ducted to a central location. The interchangeable, multi-positional inlet/outlet spigots allow for quicker installation with only one external wall penetration. The dwelling internal air discharge grille is usually installed at high level in a central location within the hallway, although discharging the air down the length of the hallway (away from the front door) should also prove acceptable.

GBP 415.02
1

Flat Master 2000R Wall Mounted Positive Input Ventilation System

Flat Master 2000R Wall Mounted Positive Input Ventilation System

Product Part Number FLAT Master 2000R - FLAT2000R Description The Flatmaster solution has been specifically designed to ventilate homes without lofts and is recommended for planned and reactive ventilation servicing. Suitable as a social housing ventilation solution, the system introduces air into the home at a continuously low rate, eliminating condensation dampness and forcing out indoor pollutants such as Radon gas and carbon monoxide. Allergens are kept to a minimum and outdoor pollutants such as pollen and traffic fumes are kept out. The results are a fresh and healthy indoor environment. Cures Condensation - Reduces humidity in the air, curing condensation dampness and preventing mould growth Healthy Living Environment - Removes both indoor and outdoor pollutants from the home, overall improving indoor air quality High Efficiency - Extremely low power consumption as low as 3 watts per hour Meets Regulations - Meets Part F & L of Building Regulations as a low-energy ventilation strategy Ideal For Apartments - Designed to ventilate homes without lofts, the unit is compact and be concealed away in a convenient location 5 Year Warranty - 1 year parts and labour, remaining years parts only. Technical Specifications: The Flatmaster 2000R is designed to take fresh air from outside, clean the air, and discharge it into the central hallway via a system of ducting. The unit is usually situated in a convenient location, such as a kitchen cupboard or hallway. The unit is designed to take fresh air from outside, filter the air and discharge it into the central hallway via a system of ducting. The unit is usually situated in a kitchen, airing cupboard or hallway, and is ducted to a central location. The interchangeable, multi-positional inlet/outlet spigots allow for quicker installation with only one external wall penetration. The dwelling internal air discharge grille is usually installed at high level in a central location within the hallway, although discharging the air down the length of the hallway (away from the front door) should also prove acceptable.

GBP 424.24
1

Flat Master Wall Mounted Positive Input Ventilation System

Flat Master Wall Mounted Positive Input Ventilation System

Product Part Number Standard Unit - FLATMASTER Description The Flatmaster solution has been specifically designed to ventilate homes without lofts and is recommended for planned and reactive ventilation servicing. Suitable as a social housing ventilation solution, the system introduces air into the home at a continuously low rate, eliminating condensation dampness and forcing out indoor pollutants such as Radon gas and carbon monoxide. Allergens are kept to a minimum and outdoor pollutants such as pollen and traffic fumes are kept out. The results are a fresh and healthy indoor environment.

GBP 329.99
1

Gerband SD2 Control Airtightness Membrane (1.5m x 50m)

Gerband SD2 Control Airtightness Membrane (1.5m x 50m)

Gerband SD2 Control Airtightness Membrane (1.5m x 50m) Product Part Number Gerband SD2 Control Airtightness Membrane - GERBAND-SD2 Description Gerband Air Tightness SD2 Control Membrane is a reliable vapour control layer that enables airtightness and vapour control in roof and wall constructions. During winter, it reliably prevents diffusion of interior humidity into the roof and wall construction. During summer, it allows for back fusion from the insulation as well as the wall and roof construction preventing condensation that facilitates mildew growth and constructional damage.

GBP 132.61
1

Bsk Zephyr External Hood - White (Standard Depth)

Bsk Zephyr External Hood - White (Standard Depth)

Bsk Zephyr Coloured wall hoods Product Part Number Black Hood - ZEP/EXT/STANDARD/WHITE Description Zephyr wall hoods To further enhance the Zephyr single room, heat recovery unit we supply two types of metal external wall hoods in a range of standard colors We can also supply on large projects a powder coating service to any required RAL color if required Zephyr External Hood This metal hood is a replacement over the standard PVC hood supplied with the unit and is available in two standard colors of Black or Unpainted stainless steel 

GBP 104.18
1

Quelfire Round Fire Sleeve Range

Quelfire Round Fire Sleeve Range

Quelfire Round Fire Sleeve Range Product Part Number QF 75mm  Fire Sleeve - QRS75 QF 100/110mm  Fire Sleeve - QRS110 QF 125/130mm  Fire Sleeve - QRS130 QF 110x54mm  Fire Sleeve - QRS110/54 QF 205x60mm  Fire Sleeve - QRS205/60 QF 220x90mm  Fire Sleeve - QRS220/90 Composition The QRS Fire Sleeve consists of a continuous pressed steel shell containing a high performance graphite based intumescent material which reacts under the influence of heat to exert pressure on the plastic vent duct as it softens to form a carbonaceous char which provides an effective insulation plug thus preventing fire passing through to the adjoining compartment. The QRS is manufactured specifically to suit differing sizes and diameters of duct and is supplied ready to be fitted into the wall with an opening lid for retrofitting. Durability Tested to Type X durability which means the QRS Intumescent Fire Sleeves can be installed in conditions exposed to weathering. Standards & Approvals Tested to BSEN 1366-3 and classified according to EN 13501-2 Tested with Uncapped / Uncapped (U/U) duct configurations as required for ventilation ducts Up to 2 hour fire rating Installation Information Quelfire QRS Intumescent Fire Sleeves should be used where a plastic ventilation duct penetrates a fire rated wall to maintain the compartmentation in the event of a fire. The QRS requires no mechanical fixing or framework support, they rely on the fire rated wall construction, plasterboard or solid masonry/block (or QuelStop Fire Batt) to hold it in place so the penetrations should be cut as tight as possible to the QRS Fire Sleeve itself, suggested approximate apertures sizes are given in the “performance” table below. For the simplest installation, the QRS Fire Sleeve should be installed around the duct and then the wall installed tight around the QRS, however, they can be retrofitted into the wall too. Simply hinge open the lid, feed around the duct, wrap tight and close the lid, secure shut with the self-adhesive tape supplied (or self tapping screw in the case of circular fire sleeves) and then slide the QRS along the duct into the wall construction. The QRS should be installed centrally positioned within the wall and must be either flush or protruding from both sides of the wall in accordance with the relevant installation detail.Once installed into the wall, in the correct position, the perimeter should be sealed with QuelStop Intumescent Acoustic Acrylic Sealant. Where oversize hole or letterboxes with other services are formed then the QRS Fire Sleeve can be installed in conjunction with the QuelStop Fire Batt system having been tested in various wall constructions including with multiple ducts/QRS stacked or side by side. Where a cluster of ducts/QRS are installed the QRS should be tight to each other, alternatively they need to be far enough apart to suitably install QuelStop Fire Batt or the original wall construction, all in accordance with the specific installation detail and tested scope of application. A full set of installation details and a step by step guide are available and we recommend you check all available data before commencing installation. For full details of the tested scope of application and for installation details, please contact the Quelfire Technical Team.

GBP 32.78
1