24 results (0,16435 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Komfovent R600V Rotary wheel vertical unit (use C6 controller)

Komfovent R600V Rotary wheel vertical unit (use C6 controller)

Description Komfovent R600 V Left Hand 1151739 Komfovent R600 V Right Hand 1151738 The Komfovent Domekt R-600-V heat recovery unit is a high-quality floor / ceiling mounted rotary wheel unit suitable for new houses up to 390m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R600 V Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 390m2 Airflow rate @100Pa – 669 m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 84%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581           Komfovent C6.1 User and installer Controller QV-KV-H-SENSOR Quiet-Vent

GBP 3699.45
1

Komfovent Domekt R-700-V Heat Recovery Unit

Komfovent Domekt R-700-V Heat Recovery Unit

Komfovent Domekt R-700-V Heat Recovery Unit Product Part Number Komfovent Left Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-L Komfovent Right Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-R Description The Komfovent Domekt R-700-V heat recovery unit is a high-quality rotary wheel unit suitable for new houses up to 480m2. Technical Features Suitable for house sizes up 480m2 Maximum airflow rate - 850m3/h Airflow rate @ 100Pa - 764m3/h Optional direct connection to kitchen cooker hood Provides up to 83% heat recovery Sound level @3m - 34 dB(A) Weight - 114kg Dimensions W x H x D – 1070mm x 950mm x 645mm Duct diameter – 250mm Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish. The fan motors are protected from humidity and dust as well as being equipped with long-life bearings.

GBP 4168.82
1

Special Offer Panasonic Counter Flow Ventilation VENTX 40V

Special Offer Panasonic Counter Flow Ventilation VENTX 40V

Description PAW-VENTX–V is a ventilation unit complete with a heat recovery exchanger cell which is dedicated to changing air without wasting energy. The unit is particularly suitable for single family units, flats and in all cases where the nominal flow rates for air exchange do not exceed 380 m³/h. The unit is designed for installation inside buildings protected from the weather in a vertical wall position with ducted air distribution. Counter flow ventilation units are equipped with two fans to supply and extract air. A cross-flow heat exchanger recovers the energy contained in the extracted air and transfers it to the supplied air. This significantly reduces the building’s energy consumption, while at the same time keeping a good quality of the indoor air. The PAW-VENTX range is a fixed speed controlled unit, these models are recommended by us for Renovation projects only. Structure: self-supporting sheet metal frame, interior in high density EPS 30 kg/m³ and polyethylene foam. Carpentry and internal plugging in thick galvanised sheet metal. counterflow type: sensible polypropylene version Brushless fans: DC fans regulated by inverters allow high levels of comfort and energy efficiency with constant flow function. Filters: EPM1 filter on fresh air and extract air with low pressure drop. Easily removable for routine maintenance. Models: 2 sizes with different flow rates are available. PAW-VENTX-30V PAW-VENTX-40V Configurations: the unit is configurable in air flows according to the position of the room side and the outdoorside.• A factory configuration• B configuration modifiable on site Vertical Unit Airflow nominal: 266m³/h Airflow Maximum: 380m³/h Dimensions HxWxD: 590 x 576 x 795mm Weight 38kg *Requires Controller* Digital Controller for Panasonic Counter Flow systems(PAW-VENTX) 3 position fixed speed conroller (no accessible adjustment)

GBP 1080.00
1

Special Offer Panasonic Counter Flow Ventilation VENTX 30V

Special Offer Panasonic Counter Flow Ventilation VENTX 30V

Description PAW-VENTX–V is a ventilation unit complete with a heat recovery exchanger cell which is dedicated to changing air without wasting energy. The unit is particularly suitable for single family units, flats and in all cases where the nominal flow rates for air exchange do not exceed 300 m³/h. The unit is designed for installation inside buildings protected from the weather in a vertical wall position with ducted air distribution. Counter flow ventilation units are equipped with two fans to supply and extract air. A cross-flow heat exchanger recovers the energy contained in the extracted air and transfers it to the supplied air. This significantly reduces the building’s energy consumption, while at the same time keeping a good quality of the indoor air. The PAW-VENTX range is a fixed speed controlled unit, these models are recommended by us for Renovation projects only. Structure: self-supporting sheet metal frame, interior in high density EPS 30 kg/m³ and polyethylene foam. Carpentry and internal plugging in thick galvanised sheet metal. counterflow type: sensible polypropylene version Brushless fans: DC fans regulated by inverters allow high levels of comfort and energy efficiency with constant flow function. Filters: EPM1 filter on fresh air and extract air with low pressure drop. Easily removable for routine maintenance. Models: 2 sizes with different flow rates are available. PAW-VENTX-30V PAW-VENTX-40V Configurations: the unit is configurable in air flows according to the position of the room side and the outdoorside.• A factory configuration• B configuration modifiable on site Vertical Unit Airflow nominal: 210m³/h Airflow Maximum: 300m³/h Approximate Property area capacity: 179m2 Dimensions HxWxD: 590 x 576 x 795mm Weight 38kg *Requires Controller* Digital Controller for Panasonic Counter Flow systems(PAW-VENTX) 3 position fixed speed conroller (no accessible adjustment)

GBP 960.00
1

Komfovent Verso Commercial Heat Recovery Unit

Komfovent Verso Commercial Heat Recovery Unit

Komfovent Verso Commercial Heat Recovery Units Product Part Number Komfovent CF-1000F Counterflow Flat Commercial unit with Electric Heater - Verso-CF-1000F Komfovent CF-1000F Counterflow Flat Commercial unit No Heater - Verso-CF-1000F-WDH Komfovent CF-1300F Counterflow Flat Commercial unit with Electric Heater - Verso-CF-1300F-E Komfovent CF-1300F Counterflow Flat Commercial unit No Heater - Verso-CF-1300F-WDH Komfovent CF-1500F Counterflow Flat Commercial unit with Electric Heater - Verso-CF-1500F-E Komfovent CF-1500F Counterflow Flat Commercial unit No Heater - Verso-CF-1500F-WDH Description These units are specified directly to your projects, please contact our team on 028 2827 5150 Verso units are designed for efficient ventilation and are suitable for various types of projects. You can choose a unified unit from the version standard series, or pro which can be specifically tailored to meet your requirements. Large number of configurations (vertical, horizontal, flat, and universal type with rotary or plate heat exchangers) allow you to always select optimal and most efficient solution. Please contact us for pricing Energy Recovery Non-freezing rotary heat exchangers efficiently recovery heat and cold, they control the humidity and provide comfort throughout the year. PM Motors Ultra-premium efficient IE5 class PM fan motors minimize power consumption and ensure durability of the unit. Energy Saving Technologies Units are equipped with the most efficient and advanced technical solutions: high efficiency PM/EC of ultra and premium classes, non-freezing condensing and sorption rotary heat exchangers, high efficiency counter flow heat exchangers, high surface area air filters. All of these solutions greatly reduce operational costs and shorten playback time. Verso Standard Unit capacity 100-8000m3/h R models feature a rotary heat exchanger CF models feature a counterflow plate heat exchanger Supply air unit verso S Vertical, horizontal, flat, or universal applications Compact design Verso Pro Specifically tailored to meet your requirements. This series offers large number of configurations and integrated c5 control system Unit capacity 1000-40000 m3/h 10 basic sizes for

GBP 4729.54
1

Vent Axia Sentinel Kinetic High Flow Heat Recovery System

Vent Axia Sentinel Kinetic High Flow Heat Recovery System

Vent Axia Sentinel Kinetic High Flow Heat Recovery Unit Product Part Number Vent Axia Kinetic High Flow  Right Handed Heat Recovery Unit - 408449 Vent Axia Kinetic High Flow Left Handed Heat Recovery Unit - 408451 Description The UK’s top selling MVHR unit for houses with a max floor area of 345m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia High flow Suitable for floor areas up to 345m2 Delivers an airflow rate of up to 575 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 34KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 345m2 With a high performance of 575 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection

GBP 2208.00
1

Vent Axia Kinetic FH Heat Recovery Unit

Vent Axia Kinetic FH Heat Recovery Unit

Vent Axia Sentinel Kinetic FH Heat Recovery Unit Product Part Number Vent Axia Kinetic F Right Handed - 408167 Vent Axia Kinetic F Left Handed - 408169 Description The UK’s top selling MVHR unit for houses with a max floor area of 150m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia FH Suitable for floor areas up to 185 m2 Delivers an airflow rate of up to 310 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 18KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 185m2 With a high performance of 310 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V

GBP 1547.52
1

Vent Axia plus B

Vent Axia plus B

Vent Axia plus B Product Part Number Vent Axia Plus B Right Handed Unit - 443028 Vent Axia Plus B Left Handed Unit - 443028L(Special order only) Key Features – Vent Axia Plus B Suitable for floor areas up to 250m2 Delivers an airflow rate of up to 425 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 24KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 250m2 With a high performance of 425 m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Optional 180mm/200mm spigots can simplify connection in commercial installations where larger diameter duct work has been used. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V proportional speed adjustment Volt free contacts 24V sensor supply Integral on/off or trickle boost function from remote switch, e.g. PIR occupancy detector Switched Live input with adjustable ‘delay-on’ feature Fan failure or component failure indicated via individual fault code display Running time counter

GBP 1660.80
1

Vent Axia Sentinel Kinetic BH Heat Recovery Unit

Vent Axia Sentinel Kinetic BH Heat Recovery Unit

Vent Axia Sentinel Kinetic BH Heat Recovery Unit Product Part Number Vent Axia Kinetic BH Right Handed Unit - 443319 Vent Axia Kinetic BH Left Handed Unit - 443319L Description The UK’s top selling MVHR unit for houses with a max floor area of 150m2 due to the combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features – Vent Axia BH Suitable for floor areas up to 150m2 Delivers an airflow rate of up to 245 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 15KG UK manufactured MVHR unit with 5 Year parts warranty through BPC Optional acoustic Top Box High Performance The Sentinel Kinetic Plus benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 150m2 With a high performance of 245m3/hr at 100Pa while still achieving almost 90% heat recovery. The fully automatic capability of the Kinetic range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 3 x Integral infinitely variable fan speed control on supply and extract there is also an optional LCD wall mounted controller available  Spigot Options Spigots may be re-positioned from vertical to give horizontal connection or a combination of vertical and horizontal connection. Orientation This unit is available in both a right hand (external pipes to the RHS) and left-hand version (external pipes to the LHS) it is also possible to convert the orientation on site by following our instruction manual 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home BMS The Kinetics’ BMS capability is also ideal for those commercial applications where landlords or property managers want to monitor and optimise building performance and maintenance. The Kinetic BMS can provide status information and its self-diagnostics can report if any fault is found. Filtration The unit comes supplied with G4 filters with an option of upgrading the air supply filter with a G5 filter that have tool free access As many systems are placed within cupboards the unique filter design folds as you remove it to ensure easy access in restricted spaces. Acoustic enclosure For scenarios where noise is a critical issue, an optional Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Frost Protection Automatic frost protection effective to -20°C External Control Components Integral BMS input/output interfaces – 0-10V proportional speed adjustment Volt free contacts 24V

GBP 1209.60
1

Vent-Axia Sentinel Econiq M - 499632

Vent-Axia Sentinel Econiq M - 499632

Vent-Axia Sentinel Econiq M Product Part Number 499632 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq L is suitable for houses with a max floor area of 270m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 270m2 Delivers an airflow rate of up to 450 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 55KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional Wall mounting kit for controller Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge van integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq M benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 270m2 With a high performance of 450 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the quietest systems on the market, with a noise level as low

GBP 2691.84
1

Vent-Axia Sentinel Econiq L - 499641

Vent-Axia Sentinel Econiq L - 499641

Vent-Axia Sentinel Econiq L Product Part Number 499641 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq L is suitable for houses with a max floor area of 360m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 360m2 Delivers an airflow rate of up to 600 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 55KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional comfort cooling Optional Wall mounting kit for controller Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge fan integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq S benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 360m2 With a high performance of 600 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the quietest systems on the

GBP 3171.84
1

Vent-Axia Sentinel Econiq S - 499883

Vent-Axia Sentinel Econiq S - 499883

Vent-Axia Sentinel Econiq S Product Part Number 499883 Description The Sentinel Econiq are Latest flagship and highest specification MVHR units from Vent Axia Vent Axia are the largest manufacture of heat recovery units in the UK and the Econiq S is suitable for houses with a max floor area of 210m2 With a combination of being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options including smartphone control make this unit top of the list for all types of homes BPC Ventilation are the largest independent MVHR specialists and supply this unit with a 5-year parts warranty* and lifetime technical support on our top-quality systems. Key Features Suitable for floor areas up to 210m2 Delivers an airflow rate of up to 350 m³/hour @ 150 Pa High heat recovery efficiency of up to 93%. Low weight of only 32KG Digital controller on unit with optional wall mounting kit Easy Smartphone App Commissioning Sentinel-X wireless controls platform Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved Approved Document F aligned commissioning wizard Internal humidity sensor for automatic speed control Ultra Quiet Unit mounted control panel Airtight Housing Latest highly efficient soft start EC3 Motors Up to 93% heat recovery Horizontal or vertical duct connections Sound levels as low as 15.5 dB(A) Left and Right configuration via control panel Manufactured in the UK PVC Counterflow heat recovery core 2 x G3 filters and Optional ePM10 (M5) and ePM2.5 (F7) filtration Multiple Control options including 0 to100% fan speed settings, Humidity, BMS, timer delay, 0-10v & 240v boost options Filter check RF858 connectivity, 802.11b/g/n Wi-Fi and Bluetooth low energy 4.2 Optional Wall mounting kit for controller Optional Acoustic enclosure and Top Box (S only) Optional HMI Kit Optional 0-10v, Co2, Temp, Humidity wired room sensors Optional wireless Temp, Humidity and 4 speed switches Optional 240v Co2, Temp, Humidity, PIR and 4 speed switches Optional AIM Alarm Interface Optional Volt free expansion board Optional 0-10v expansion board Optional Purge van integration UK manufactured MVHR unit with 5 Year parts warranty through BPC High Performance The Sentinel Econiq S benefits from the latest high efficiency, ED/DC backward curved impeller design, ensuring the lowest possible energy consumption, ultra quiet operation and an exceptional performance range to houses with a floor area of up to 220m2 With a high performance of 350 m3/hr at 150Pa while still achieving almost 93% heat recovery. The fully automatic capability of the Econiq range means that adequate ventilation is always achieved. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The nighttime relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature. Digital Controller A digital controller is supplied fitted to the unit allowing multiple options on programming and controllability, including 4 x Integral infinitely variable fan speed control on supply and extract there is also an optional kit allowing you to remove the controller from the unit and wall mount in your chosen location There is also a pin number facility to prevent accidental resetting of commissioning settings App Control The Vent-Axia Connect smartphone application allows full control with a multitude of functions from automated to fully adjustable from the comfort of the sofa on iOS and Android smartphones Orientation This unit can be electronically changed from right to left hand orientation Spigot Options The 200mm Spigots may be re-positioned from a vertical to a horizontal connection or a combination of vertical and horizontal connection. 100% summer By-pass During hot weather you can activate the summer By-Pass that will only bring the filtered air in at external temperatures allowing you to naturally cool your home Low Noise Levels The Lo-Carbon Sentinel Econiq is one of the

GBP 1902.72
1

BSK NOTUS Multi Orientation Unit with Humidity Sensor

BSK NOTUS Multi Orientation Unit with Humidity Sensor

Description BSK NOTUS/HV/350 The BSK Notus 350 heat recovery unit is a quality MVHR unit manufactured of the latest EPP construction and can installed either vertically or horizontally allowing for almost all site restrictions suitable for new houses up to 225m2 that has advanced Wi-Fi controllability and internal humidity sensor   This unit has a (A) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- BSK Notus 350 Interactive Wi-Fi Smart Control App Internal humidity sensor Optional touch screen controller Horizontal or Vertical Orientation Electronic orientation change Multiple spigot connections Ultra-Light @ only 18Kg Suitable for home sizes up to 225m2 Airflow rate @100Pa – 375 m3/h EPP Super Quiet construction Highly efficient EC fans 100% summer bypass Fully adjustable fan speeds G4 filtration ‘A’ energy rating High heat recovery efficiency of up to 90%. Optional duct heaters Optional Fire alarm connection Controllability The BSK Notus has advanced controls that allow the user to easily adjust settings Wi-Fi Mobile App The BSK Mobile App is available on iOS and Google Store with the following features Monitor outdoor and indoor temperature and humidity Change fan speeds Control optional heaters Schedule weekly and daily programs Adjust all settings Wall Touch screen controller (optional) 4inch touchscreen Full control of fan speeds Temperature and humidity readings Automatic air quality control with optional AQ sensor. Extensive weekly schedule. Automatic Boost modes External Control The BSK Notus have external connections allowing for hassle free setup Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) via Modbus port Expansion port for bespoke solutions Optional wall controller 0-volt dry boost connection Optional Pre and Post heater connection BMS Control Implemented Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Connection and monitoring of multiple units by building managers can be enabled through the BSK Cloud Control Application Construction The BSK Notus is constructed of the latest EPP with a metal front cover EPP (expanded polypropylene) with its lightweight, impact absorbing, and insulating properties make it a perfect body material for MVHR units Motors The fan motors are the latest backward curved low energy EC fans of (A) energy rating Filtration 2 x G4 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The BSK range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Highly efficient PVC counterflow heat exchanger with up to 90% heat recovery Frost Protection Intelligent frost protection is standard on the BSK Notus units Orientation The BSK Notus has multiple configurations and can be electronically changed from Left- and Right-hand orientation Vertical or Horizontal Mounting Left-hand and Right-hand electronic changeover Top and Bottom spigot access Multiple Drain points Mounting The units are supplied with both wall and floor mounting brackets Accessories QV-BoostSw                                       1Gang Momentary Boost Switch NOTUS/W/BLACK/CONTROLLER BSK

GBP 1053.02
1

Komfovent RHP 400-V Air Handling Unit

Komfovent RHP 400-V Air Handling Unit

Komfovent RHP 400-V Air Handling Unit Product Part Number Komfovent RHP-400V Rotary wheel vertical unit with heat pump - RHP-400V Description Komfovent RHP range are air handling units with an integrated heat pump, this unit features all HVAC systems in one unit providing complete indoor microclimate control. Komfovent RHP 400-V air handling unit provides ventilation in premises up to 220m2. Technical Features Suitable for home sizes up to 220m2 Maximum airflow rate - 398m3/h Weight - 106kg Sound level @ 3m - 44dB(A) Dimensions W x H x D - 712mm x 892mm x 618mm Duct diameter 160mm Two Step Heating and Cooling Recovery To reach maximum efficiency these units are designs to recovery energy in two steps Step 1: Recovery by enthalpy rotary heat exchanger Step 2: Recovery by reversible heat pump Cooling Mode Due to cooling recovery by rotary heat exchanger, the air temperature after the rotor is lower than the outside air temperature. Condensation temperature in this case is lower, which results in reduced compressor electricity consumption compared with outdoor condensing unit Heating Mode  A highly efficient rotary heat exchanger is used for first-stage heat recovery, recovering the biggest part of the heat of extracted air. For second-stage heat recovery and supply air temperature control a heat pump is used Controllability Intelligent control with algorithms and reliable components to ensure safe and efficient operation. This unit can be controlled via a digital C5.1 controller Construction RHP units are constructed of galvanized steel sheets, which are powder coated. Mineral wool is used for thermal insulation and sound attenuation. Unit cover panels are 45 mm thick.

GBP 7251.69
1

Komfovent RHP-600 4.4/3.8-UV/UH

Komfovent RHP-600 4.4/3.8-UV/UH

Komfovent RHP 600-U Air Handling Unit Product Part Number Komfovent RHP-600V Rotary wheel vertical unit with heat pump - RHP-600 4.4/3.8-UV Komfovent RHP-600H Rotary wheel Horizontal unit with heat pump - RHP-600 4.4/3.8-UH Description Komfovent RHP range are air handling units with an integrated heat pump, this unit features all HVAC systems in one unit providing complete indoor microclimate control. Komfovent RHP 600-U air handling unit provides ventilation in premises up to 400m2. RHP units with heat pump drain. Technical Features Suitable for home sizes up to 375m2 Maximum airflow rate - 650m3/h Weight - 194kg Sound level @ 3m - 41dB(A) Dimensions W x H x D - 1254mm x 878mm x 650mm Duct diameter - 200mm Two Step Heating and Cooling Recovery To reach maximum efficiency these units are designs to recovery energy in two steps Step 1: Recovery by enthalpy rotary heat exchanger Step 2: Recovery by reversible heat pump Cooling Mode Due to cooling recovery by rotary heat exchanger, the air temperature after the rotor is lower than the outside air temperature. Condensation temperature in this case is lower, which results in reduced compressor electricity consumption compared with outdoor condensing unit Heating Mode  a highly efficient rotary heat exchanger is used for first-stage heat recovery, recovering the biggest part of the heat of extracted air. For second-stage heat recovery and supply air temperature control a heat pump is used Controllability Intelligent control with algorithms and reliable components to ensure safe and efficient operation. This unit can be controlled via a digital C5.1 controller Construction RHP units are constructed of galvanized steel sheets, which are powder coated. Mineral wool is used for thermal insulation and sound attenuation. Unit cover panels are 45 mm thick.

GBP 10832.18
1

Airflow DV65 Entro MVHR Unit

Airflow DV65 Entro MVHR Unit

Airflow DV65 Entro MVHR Unit Product Part Number DV65 Entro-V Unit - 90001243 DV65 Entro-V Unit with Basic Controller - 90001309 DV65 Entro-V Unit - with Digital Controller - 90001312 Description The DV65 Entro-V is a highly efficient, top entry MVHR unit that can recover over 85% of the wasted heat. The unit is reliably manufactured to ensure high thermal efficiencies with optional ancillaries such as electric heaters, F7 (ISO ePM1 55%) supply air filter and various sensors. The DV65 has low energy EC fans that minimise the unit's energy consumption therefore can help reducing energy bills. The unit has an easy to maintain plastic counterflow heat exchanger that prevents the airstreams from mixing and easy to clean air filters that provide you with a clean, healthy indoor air environment. Please note – this unit is available to purchase on its own, with a basic controller or with a digital controller. Unit Components The DV65 Entro-V includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air with thermal efficiency over 85%. At no point do the airstreams mix. The DV65 Entro-V unit is designed with a double filter facility that comes with 2 x G4 (ISO ePM Coarse 55%) filters as standard. There is the option to have a F7 (ISO ePM1 %%5) pollen filter included, which provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Adaptable Design The DV65 Entro-V unit can be installed in vertical mounting positions, on the wall or floor. Hanging brackets, screws and feet are supplied with the unit. Also, the unit has interchangeability of spigot positions from top or sides. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 1733.27
1

Airflow DV82 Entro MVHR Unit

Airflow DV82 Entro MVHR Unit

Airflow DV82 Entro MVHR Unit Product Part Number DV82 Entro-V - 90001244 DV82 Entro-V With Basic Controller - 90001310 DV82 Entro-V with Digital Controller - 90001313 Description The DV82 Entro-V is a highly efficient, top entry MVHR unit that can recover over 85% of the wasted heat. The unit is reliably manufactured to ensure high thermal efficiencies with optional ancillaries such as electric heaters, F7 (ISO ePM1 55%) supply air filter and various sensors. The DV82 has low energy EC fans that minimise the unit's energy consumption therefore can help reducing energy bills. The unit has an easy to maintain plastic counterflow heat exchanger that prevents the airstreams from mixing and easy to clean air filters that provide you with a clean, healthy indoor air environment. Please note – this unit is available to purchase on its own, with a basic controller or with a digital controller Components The DV82 Entro-V includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air with thermal efficiency over 85%. At no point do the airstreams mix. The DV82 Entro-V unit is designed with a double filter facility that comes with 2 x G4 (ISO ePM Coarse 55%) filters as standard. There is the option to have a F7 (ISO ePM1 %%5) pollen filter included, which provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Adaptable Design The DV82 Entro-V unit can be installed in vertical mounting positions, on the wall or floor. Hanging brackets, screws and feet are supplied with the unit. Also, the unit has interchangeability of spigot positions from top or sides. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 1929.18
1

Airflow DV130 Entro MVHR Unit

Airflow DV130 Entro MVHR Unit

Airflow DV130 Entro MVHR Unit Product Part Number DV130 Entro-V Unit - 90001245 DV130 Entro-V Unit with Basic Controller - 90001311 DV130 Entro-V Unit with Digital Controller - 90001314 Description The DV130 Entro-V is a highly efficient, top entry MVHR unit that can recover over 85% of the wasted heat. The unit is reliably manufactured to ensure high thermal efficiencies with optional ancillaries such as electric heaters, F7 (ISO ePM1 55%) supply air filter and various sensors. The DV130 has low energy EC fans that minimise the unit's energy consumption therefore can help reducing energy bills. The unit has an easy to maintain plastic counterflow heat exchanger that prevents the airstreams from mixing and easy to clean air filters that provide you with a clean, healthy indoor air environment. Please note – this unit is available to purchase on its own, with a basic controller or with a digital controller. Components The DV130 Entro-V includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air with thermal efficiency over 85%. At no point do the airstreams mix. The DV130 Entro-V unit is designed with a double filter facility that comes with 2 x G4 (ISO ePM Coarse 55%) filters as standard. There is the option to have a F7 (ISO ePM1 %%5) pollen filter included, which provides additional protection against invisible, harmful particles and creates an ultra-hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Adaptable Design The DV130 Entro-V unit can be installed in vertical mounting positions, on the wall or floor. Hanging brackets, screws and feet are supplied with the unit. Also, the unit has interchangeability of spigot positions from top or sides. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 2177.83
1

Vent Axia Lo-Carbon Sentinel Kinetic Cooker Hood

Vent Axia Lo-Carbon Sentinel Kinetic Cooker Hood

Vent Axia Sentinel Kinetic heat recovery unit with Cooker Hood Product Part Number Vent Axia Kinetic CWH L (White Cooker Hood) - 446756 Description The Sentinel Kinetic Cooker Hood is designed to fit in a 600mm wide aperture above a hob. The telescopic hood incorporates two flat removable metal grease filters, low energy light bulbs and is available with a White or Brushed Aluminium front trim. The hood contains an integral fire damper in accordance with BRE Digest 398 and is connected to the heat recovery unit by a galvanised steel duct with access for cleaning. When the hood is opened, the heat recovery unit goes to boost speed and the summer bypass automatically opens to prevent cooking by-products entering the heat recovery cell. As an additional safety feature, the duct also contains a thermal cut-out fuse which turns off the MVHR unit in the event of excessive temperature in the airway. Cooker Hood units cannot be handed on-site and must be purchased as left hand (L) or right hand (R) models. The Lo-Carbon Sentinel Kinetic BH is the UKs bestselling heat recovery unit for people looking for a top quality unit at a realistic cost. Suitable for houses up to 150 m2 and meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation. Filtration 2 x G4 with the option of a F7 pollen intake filter Controllability The Lo-Carbon Sentinel Kinetic models have 3 fully adjustable speeds and a purge setting (maximum flow). Provided with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range Boost can be achieved with almost any type of sensor or switch including momentary  Integral Humidity Sensor The integral humidity sensor (models with H suffix) increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction The outer enclosure is constructed of PVC with the inner body being constructed of EPP Motors The unit has 2 x low energy, high efficiency EC/DC motors Installation Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after

GBP 2862.29
1

Airflow Geothermal Kit

Airflow Geothermal Kit

Airflow Geothermal Kit Product Part Number Airflow Geothermal Kit - AFGEOTHERM Description The Brine to Air Exchanger enhances the thermal efficiency of your MVHR unit by provided additional preheating to your unit during the winter and also helps to cool the air during the summer. The Brine to Air Exchanger uses the warmth in the ground to maintain the brine’s temperature of 8 - 12°C. A 1.2 m deep flexible polyethylene under-soil tube pumps brine through a loop. To increase the heat exchange the tube should be laid directly under the soil in a sand bed. The minimum space between the parallel tubes should be 0.5 m. Alternatively to laying the tube horizontally a vertical bore can be used. Operation Brine to Air Energy collector can work either in automatic or manual mode. In automatic mode operation of the circulation pump is controlled by the MVHR unit. The pump circulates the brine when the outside air temperature falls below 5°C or when actual supply air temperature is higher than the set value. System can be switched into the manual mode by using an operation switch. In this mode the circulation pump is always turned on regardless of the outdoor air temperature. Installation Brine to air heat exchanger is mounted in-line before mvhr unit. It is important that the air flows through the heat exchanger in horizontal direction. To provide optimum performance it is recommended that approx. 1m of straight duct is mounted upstream and downstream of the brine to air heat exchanger. The ducting should be done with Airflex ISO system to avoid creation of the condensation. Alternatively insulated spiral ducting can be used. Pipework and connection between hydraulic kit and brine to air heat exchanger shall be provided on site. The pipe connections of the hydraulic kit are ¾” IG. The quick vent valve must be installed at the highest point of the pipework. It is recommended to install undersoil tube when outdoor air is above 5°C. The area where the undersoil tube is laid should not be built over so it is guaranteed that seeping rainwater can contribute to the thermal regeneration of the soil. The filling of the system is carried out via feed and drain cock located on the hydraulic kit. During this operation take care to avoid air entering the system. After the installation of the undersoil pipework, system should be tested at high pressure for tightness check. How does a brine Geothermal system work A network of brine (salty water) filled pipes are buried at a depth of approx 1.5 meters and connect to the air intake of a heat recovery ventilation system via a heat exchanger. The geothermal ducts use the energy stored in the ground. At a depth of 1 - 2 meters, the ground temperature in the UK varies between +8 and +12 ºC depending on the season and on the soil type. By using the relatively stable temperature at this, the efficiency of the ventilation system is greatly improved  This provides a source of heating or cooling for a building. As an example, if in the winter months the outside temperature is -5ºc, the ground

GBP 2809.33
1

Vent-Axia NBR 14 Room Kit

Vent-Axia NBR 14 Room Kit

Description MVHR New Build (NBR) 14 room Kit Our New Build Residential (NBR) 14 room kit is a complete whole house heat recovery system consisting of a Vent Axia Plus B heat recovery unit and Quiet-Vent 14 room easy to install crushproof radial ducting kit ensuring that your home enjoys a quiet and efficient system supplying supreme air quality which also help prevent indoor pollutants, humidity, mould, and odours. This kit is ideally suited for new build or high-end renovation to 4-to-5-bedroom housing with a maximum floor area of 250m2 requiring up to 6 air extraction points and 8 air supply points BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems This MVHR unit is ideal for new builds due to being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options This kit is only available online and has been selected from data of 1000s of completed projects to provide everything you should require installing a quality system but if you do require a bespoke system by our inhouse professional team please contact us   Key Features – Vent Axia Plus B Suitable for floor areas up to 250m2 Delivers an airflow rate of up to 425 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 24KG UK manufactured MVHR unit with 5 Year parts warranty The New Build Residential (NBR) 14 room kit comes complete with a Quiet-Vent radial duct kit which includes everything you require such as ducting, grilles, and ancillaries. that is renowned for providing a quiet and efficient ventilation system suitable for lifetime use Key features - QV-150-14pt   250m x German 75mm radial pipe with antibacterial and antistatic lining 2 x Galvanised steel distribution manifolds 14 x Quality long reach air valve plenums that are easy to install 14 x Quick fitting Air valves from Scandinavia 2 x Acoustic silencers to main pipework   What's in the box? 6 QV-125AVP-E 125mm - Quiet-Vent extract air valve PVC 8 QV-125AVP-S 125mm - Quiet-Vent supply air valve PVC 4 P150-2 150mm - PVC Pipework x 2 meter 3 C150 150mm - PVC Pipe connector 10 B90150 150mm - PVC 90º bends 2 QV- ADP180150 Quiet-Vent Metal Adaptor for Distribution box 180 F/M - 150 Male 2 QV150F-SILENCER Quiet-Vent 150mm x 500mm - Flexi insulated sound attenuator with adaptors 4 INS25 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m) 2 SSC150 150mm - Exterior grille S/steel louvered Cowl 4 QVRC150 Quiet-Vent 150mm Rubber flexible circular duct connector & 2 x clips 2 ST75 75mm - Roll Silver Foil Tape 3 BS50 Builders Strap Roll (10 meters) 1 SE380 Sealant - Grey Duct 5 QV75P-FS FS 75mm -  50 Metre Antibacterial Radial pipe (use QV rings)

GBP 3177.30
1

Vent-Axia NBR 18 Room Kit

Vent-Axia NBR 18 Room Kit

Description MVHR New Build (NBR) 18 room Kit Our New Build Residential (NBR) 18 room kit is a complete whole house heat recovery system consisting of a Vent Axia Highflow heat recovery unit and Quiet-Vent 18 room easy to install crushproof radial ducting kit ensuring that your home enjoys a quiet and efficient system supplying supreme air quality which also help prevent indoor pollutants, humidity, mould, and odours. This kit is ideally suited for new build or high-end renovation to 5-to-7-bedroom housing with a maximum floor area of 345m2 requiring up to 8 air extraction points and 10 air supply points BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems This MVHR unit is ideal for new builds due to being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options This kit is only available online and has been selected from data of 1000s of completed projects to provide everything you should require installing a quality system but if you do require a bespoke system by our inhouse professional team please contact us   Key Features – Vent Axia Plus B Suitable for floor areas up to 340m2 Delivers an airflow rate of up to 575 m³/hour @ 100 Pa Full 100% automatic summer bypass to supply unheated air in the summer Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options 2 x G4 filters (optional M5) Low weight of only 24KG UK manufactured MVHR unit with 5 Year parts warranty The New Build Residential (NBR) 14 room kit comes complete with a Quiet-Vent radial duct kit which includes everything you require such as ducting, grilles, and ancillaries. that is renowned for providing a quiet and efficient ventilation system suitable for lifetime use Key features - QV-180-18pt   350m x German 75mm radial pipe with antibacterial and antistatic lining 2 x Galvanised steel distribution manifolds 18 x Quality long reach air valve plenums that are easy to install 18 x Quick fitting Air valves from Scandinavia 2 x Acoustic silencers to main pipework   What's in the box? 8 QV-125AVP-E 125mm - Quiet-Vent extract air valve PVC 10 QV-125AVP-S 125mm - Quiet-Vent supply air valve PVC 4 P180M-2 180mm - Metal Pipework x 2 meter 10 B90180M 180mm - Metal B90º Vent Pressed Bend 3 C180MM 180mm - Metal NP Vent Male Coupling 2 QV180F-SILENCER Quiet-Vent 180mm x 500mm - Flexi insulated sound attenuator with adaptors 6 INS25 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m) 2 9041229 180mm - Exterior grille S/steel louvered Cowl 4 CRC170-185 185mm - Rubber flexible circular duct connector (170-185) 2 ST75 75mm - Roll Silver Foil Tape 4 BS50 Builders Strap Roll (10 meters) 1 SE380 Sealant - Grey Duct 7 QV75P-FS FS 75mm -  50 Metre Antibacterial Radial pipe (use QV rings) 18 QV75-PLEN Quiet-Vent 75mm Plenum 7

GBP 4288.01
1

Vent-Axia BH NBR 10 Room Kit

Vent-Axia BH NBR 10 Room Kit

Description MVHR New Build (NBR) 10 room Kit Our New Build Residential (NBR) 10 room kit is a complete whole house heat recovery system consisting of a Vent Axia heat recovery unit and Quiet-Vent 10 room easy to install crushproof radial ducting kit ensuring that your home enjoys a quiet and efficient system supplying supreme air quality which also help prevent indoor pollutants, humidity, mould, and odours. This kit is ideally suited for new build or high-end renovation to 2-to-3-bedroom housing with a maximum floor area of 150m2 requiring up to 5 air extraction points and 5 air supply points BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems This MVHR unit is ideal for new builds due to being easy to install with high-quality construction, SAP Appendix Q approval and has multiple control and commissioning options This kit is only available online and has been selected from data of 1000s of completed projects to provide everything you should require installing a quality system but if you do require a bespoke system by our inhouse professional team please contact us   Key Features – Vent Axia BH Full 100% automatic summer bypass to supply unheated air in the summer Internal humidity sensor for automatic speed control Latest low energy EC/DC motors Digital controller on unit and optional wall mounted controller PVC Counterflow heat recovery core High heat recovery efficiency of up to 90%. Vertical or horizontal pipe connections Delivers an airflow rate of up to 245 m³/hour @ 100 Pa Suitable for floor areas up to 150m2 Multiple Control options including three 0 to100% fan speed settings, nighttime quiet mode, Purge, Humidity, BMS, timer delay, 0-10v & 240v boost options   2 x G4 filters (optional M5) Low weight of only 15KG UK manufactured with 5 Year parts warranty   The New Build Residential (NBR) 10 room kit comes complete with a Quiet-Vent radial duct kit which includes everything you require such as ducting, grilles, and ancillaries. that is renowned for providing a quiet and efficient ventilation system suitable for lifetime use Key features - QV-125-10pt   100m x German 75mm radial pipe with antibacterial and antistatic lining 2 x Galvanised steel distribution manifolds 8 x Quality long reach air valve plenums that are easy to install 8 x Quick fitting Air valves from Scandinavia 2 x Acoustic silencers to main pipework   What's in the box? Qty Internal Part Number Product Description 5 QV-125AVP-E 125mm - Quiet-Vent extract air valve PVC 5 QV-125AVP-S 125mm - Quiet-Vent supply air valve PVC 4 P125-2 125mm - PVC Pipework x 2 meter 3 C125 125mm - PVC Pipe connector 10 B90125 125mm - PVC 90º bends 2 R150125P PVC reducer 150mm (FM) - 125mm (M) 2 QV125F-SILENCER Quiet-Vent 125mm x 500mm - Flexi insulated sound attenuator 4 INS25 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m) 2 SSC125 125mm - Exterior grille S/steel louvered Cowl 4 QVRC125 Quiet-Vent 125mm Rubber flexible circular duct connector & 2 x clips 2 ST75 75mm - Roll Silver Foil Tape 2 BS50 Builders Strap Roll (10 meters) 1 SE380 Sealant - Grey Duct 3

GBP 2212.28
1

Komfovent Domekt R-450-V Heat Recovery Unit

Komfovent Domekt R-450-V Heat Recovery Unit

Description Komfovent R450 Left Hand 1035807 Komfovent R450 Right Hand 1035808 The Komfovent Domekt R-450-V heat recovery unit is a high-quality vertical rotary wheel unit suitable for new houses up to 295m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has a A+ rating and is Passive House Approved BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R450 V Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 295m2 Airflow rate @100Pa - 496m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 86%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick  with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 774164415           x1 Komfovent M5 Filter - Domekt R 450 V C6 (470×240×46mm) 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581        

GBP 2837.46
1