22 results (0,15676 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Nuaire MRXBOXAB-ECO2 Heat Recovery System

Nuaire MRXBOXAB-ECO2 Heat Recovery System

Nuaire MRXBOXAB-ECO2B Opposite Handed MRXBOXAB-ECO2B-OH Description The Nuaire MRXBOXAB-ECO2B provides a maximum flow rate of 288m3/hr suitable for a house up to 172 m2 floor area with up to 5 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)  CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time.   Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV2 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF2 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily and quickly without the risk of the spigots not aligning to the fan unit. Acoustic Enclosure Optional acoustic solutions are available for high demanding properties requiring the quietest system possible MRXBOXAB-ECO2B-AE – Unit has an acoustic surrounding with internal anti vibration mounts to the MVHR unit and flexible duct connectors MRXBOXAB-ECO2B-1Z - The 1Z is the all-in-one acoustic enclosure, allowing in the MVHR unit and attenuator to be entirely cased in an

GBP 1123.50
1

Nuaire MRXBOXAB-ECO5B Heat Recovery Unit

Nuaire MRXBOXAB-ECO5B Heat Recovery Unit

Nuaire MRXBOXAB-ECO5B Opposite Handed MRXBOXAB-ECO5B-OH Description The Nuaire MRXBOXAB-ECO5B provides a maximum flow rate of 495m3/hr suitable for a house up to 295 m2 floor area with up to 8 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO5B Suitable for floor areas up to 295m2 Delivers an airflow rate of up to 495 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV4 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF4 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily

GBP 1782.32
1

Nuaire MRXBOXAB-ECO3B Heat Recovery System

Nuaire MRXBOXAB-ECO3B Heat Recovery System

Description Nuaire MRXBOXAB-ECO3B Opposite Handed MRXBOXAB-ECO3B-OH The Nuaire MRXBOXAB-ECO3B provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 6 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX95 range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO3B Suitable for floor areas up to 190m2 Delivers an airflow rate of up to 320 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)  CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV3 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF3 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the

GBP 1303.26
1

Nuaire MRXBOXAB-ECO4 Heat Recovery System

Nuaire MRXBOXAB-ECO4 Heat Recovery System

Nuaire MRXBOXAB-ECO4B Opposite Handed MRXBOXAB-ECO4B-OH Description The Nuaire MRXBOXAB-ECO4B provides a maximum flow rate of 555m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO4B Suitable for floor areas up to 330m2 Delivers an airflow rate of up to 555 m³/hour @ 100 Pa High heat recovery efficiency of up to 94%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV4 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF4 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily and quickly

GBP 2403.14
1

Komfovent Domekt R-700-V Heat Recovery Unit

Komfovent Domekt R-700-V Heat Recovery Unit

Komfovent Domekt R-700-V Heat Recovery Unit Product Part Number Komfovent Left Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-L Komfovent Right Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-R Description The Komfovent Domekt R-700-V heat recovery unit is a high-quality rotary wheel unit suitable for new houses up to 480m2. Technical Features Suitable for house sizes up 480m2 Maximum airflow rate - 850m3/h Airflow rate @ 100Pa - 764m3/h Optional direct connection to kitchen cooker hood Provides up to 83% heat recovery Sound level @3m - 34 dB(A) Weight - 114kg Dimensions W x H x D – 1070mm x 950mm x 645mm Duct diameter – 250mm Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish. The fan motors are protected from humidity and dust as well as being equipped with long-life bearings.

GBP 4168.82
1

Nuaire Drimaster-ECO-NOX Loft Mounted PIV

Nuaire Drimaster-ECO-NOX Loft Mounted PIV

Nuaire Drimaster-ECO-NOX Loft Mounted PIV Product Part Number Nuaire Drimaster-ECO-NOX-HC (In Home Controls with Carbon Filters) - DRI-ECO-NOX-HC Nuaire Drimaster-ECO-NOX-HEAT (In Home Controls RF enabled WITH HEATER & CARBON FILTERS) - DRI-ECO-NOX-HEAT Description Nuaire Drimaster-ECO-NOX-HC By utilising Nuaire’s market-leading Positive Input Ventilation (PIV) strategy as well as two carbon cartridges inside of each ePM10 filter, the Drimaster ECO NOX eliminates condensation dampness, filters out harmful pathogens and particulate matter, and reduces the NOX levels within the home by up to 80%. Nuaire Drimaster-ECO-NOX-HEAT This model has a 400W heating element fitted on the diffuser. Cost-effective and simple to install ventilation solution that has proven to significantly improve indoor air quality, creating a healthy and comfortable living environment. This integrated heater tempers the airflow should the temperature in the loft space drop below a set point, ensuring ultimate comfort in the home. If the loft temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed, the airflow can be set to suit the house size and, if required, the way it responds to the temperature changes within. This unit also comes with a 7 segment display in the ceiling diffuser, offering complete control at the touch of a button without needing access to the unit located in the loft space. A lock function can be used to ensure the system remains tamper-proof.  

GBP 763.98
1

Airflow Geothermal Kit

Airflow Geothermal Kit

Airflow Geothermal Kit Product Part Number Airflow Geothermal Kit - AFGEOTHERM Description The Brine to Air Exchanger enhances the thermal efficiency of your MVHR unit by provided additional preheating to your unit during the winter and also helps to cool the air during the summer. The Brine to Air Exchanger uses the warmth in the ground to maintain the brine’s temperature of 8 - 12°C. A 1.2 m deep flexible polyethylene under-soil tube pumps brine through a loop. To increase the heat exchange the tube should be laid directly under the soil in a sand bed. The minimum space between the parallel tubes should be 0.5 m. Alternatively to laying the tube horizontally a vertical bore can be used. Operation Brine to Air Energy collector can work either in automatic or manual mode. In automatic mode operation of the circulation pump is controlled by the MVHR unit. The pump circulates the brine when the outside air temperature falls below 5°C or when actual supply air temperature is higher than the set value. System can be switched into the manual mode by using an operation switch. In this mode the circulation pump is always turned on regardless of the outdoor air temperature. Installation Brine to air heat exchanger is mounted in-line before mvhr unit. It is important that the air flows through the heat exchanger in horizontal direction. To provide optimum performance it is recommended that approx. 1m of straight duct is mounted upstream and downstream of the brine to air heat exchanger. The ducting should be done with Airflex ISO system to avoid creation of the condensation. Alternatively insulated spiral ducting can be used. Pipework and connection between hydraulic kit and brine to air heat exchanger shall be provided on site. The pipe connections of the hydraulic kit are ¾” IG. The quick vent valve must be installed at the highest point of the pipework. It is recommended to install undersoil tube when outdoor air is above 5°C. The area where the undersoil tube is laid should not be built over so it is guaranteed that seeping rainwater can contribute to the thermal regeneration of the soil. The filling of the system is carried out via feed and drain cock located on the hydraulic kit. During this operation take care to avoid air entering the system. After the installation of the undersoil pipework, system should be tested at high pressure for tightness check. How does a brine Geothermal system work A network of brine (salty water) filled pipes are buried at a depth of approx 1.5 meters and connect to the air intake of a heat recovery ventilation system via a heat exchanger. The geothermal ducts use the energy stored in the ground. At a depth of 1 - 2 meters, the ground temperature in the UK varies between +8 and +12 ºC depending on the season and on the soil type. By using the relatively stable temperature at this, the efficiency of the ventilation system is greatly improved  This provides a source of heating or cooling for a building. As an example, if in the winter months the outside temperature is -5ºc, the ground

GBP 2809.33
1

Testo 417 Vane Anemometer Kit 1

Testo 417 Vane Anemometer Kit 1

Testo 417 Vane Anemometer Kit 1 Product Part Number Vane Anemometer - testo-417KIT1 Description The compact vane anemometer Testo 417 was specifically designed to make measuring air inlets and outlets of air conditioning and ventilation systems as easy as possible. Its integrated 100 mm vane ensures rapid and precise results. The instrument automatically calculates time and point average values, as well as the volume flow, displaying them on its screen. This feature is particularly useful for adjusting balanced residential ventilation systems efficiently. The Testo Smart App allows for quick documentation of measurements, making it even more convenient. Moreover, the app serves as a secondary display for the instrument. For added versatility, the Testo 417 is available in two practical kits. The first kit includes two measuring funnels for plate outlets and ventilation grilles, which can be easily attached to the vane, covering a wide range of outlet sizes and formats. The second kit, in addition to the two measuring funnels, includes a volume flow straightener, allowing precise measurements even at swirl diffusers. Package Contents testo 417 funnel kit 1, consisting of vane anemometer testo 417, measuring funnel for plate outlets, measuring funnel for ventilation grilles, carrying bag, calibration protocol and 3 x AA batteries Key Features Easy, fast, and precise measurement of flow, volume flow, and temperature at air inlets and outlets Efficient regulation of balanced residential ventilation Fast documentation with the testo Smart App Fast in-app configuration, graph history, second screen, and measurement data memory in the testo Smart App Timed and point mean value calculation Durability through compact design with robust housing.

GBP 463.32
1

Zehnder Caladair Thermover

Zehnder Caladair Thermover

Zehnder Caladair Thermover Double Flux Air Treatment Station Product part Number Caladair THERMOVER 180S FIRST - CAL58 Caladair THERMOVER 280S FIRST - CAL59 Caladair THERMOVER 400S FIRST - CAL60 Caladair THERMOVER 500S FIRST - CAL61 Key Features High energy efficient double flux air treatment High performance Range of four different unit sizes Flows rates from 600 to 500 m3/h Can operate in constant pressure or constant flow modes F7 filters Low noise level for acoustic comfort 100% plug and play FEE® - Free energy efficiency Cool recovery, free cooling and night cooling Increases good indoor air quality determined by CO2 sensor 2 years parts warranty Energy savings of up to 40% Unit Range -          Caladair Thermover 180S -          Caladair Thermover 280S -          Caladair Thermover 400S -          Caladair Thermover 500S Models Available in 4 models and 4 versions, the Thermover range covers flow rates from 600 to 5000 m3/h. The Thermover range is available in 4 versions in order to suit different usage conditions: First: Self-regulating, plug & play, Modbus RS485 networked station for use in a temperate climate supported by a reversible, thermodynamic system, active temperature management through optimised energy consumption and climate control as well as continued indoor air quality control (IAQ) via a CO2 sensor. Premium: Identical to First but also equipped with an electric battery for precision heating and air blow or ambient intake temperature control for external temperatures as low as -15°C. Must: First features and also including integrated hydraulic kit for ECS production in all seasons. Genius: Identical features to Premium including integrated hydraulic kit for ECS production. Filtration Thermover units are fitted with F7 opacimetric filters for the supply and extract airflows.

GBP 24490.87
1

Testo 417 Vane Anemometer Kit 2

Testo 417 Vane Anemometer Kit 2

Testo 417 Vane Anemometer Kit 2 Product Part Number Vane Anemometer - testo-417KIT2 Description The compact vane anemometer Testo 417 was specifically designed to make measuring air inlets and outlets of air conditioning and ventilation systems as easy as possible. Its integrated 100 mm vane ensures rapid and precise results. The instrument automatically calculates time and point average values, as well as the volume flow, displaying them on its screen. This feature is particularly useful for adjusting balanced residential ventilation systems efficiently. The Testo Smart App allows for quick documentation of measurements, making it even more convenient. Moreover, the app serves as a secondary display for the instrument. For added versatility, the Testo 417 is available in two practical kits. The first kit includes two measuring funnels for plate outlets and ventilation grilles, which can be easily attached to the vane, covering a wide range of outlet sizes and formats. The second kit, in addition to the two measuring funnels, includes a volume flow straightener, allowing precise measurements even at swirl diffusers. Package Contents testo 417 funnel kit 2, consisting of vane anemometer testo 417, measuring funnel for plate outlets, measuring funnel for ventilation grilles, flow straightener, carrying bag, calibration protocol and 3 x AA batteries Key Features Easy, fast, and precise measurement of flow, volume flow, and temperature at air inlets and outlets Efficient regulation of balanced residential ventilation Fast documentation with the testo Smart App Fast in-app configuration, graph history, second screen, and measurement data memory in the Testo Smart App Timed and point mean value calculation Durability through compact design with robust housing.

GBP 549.72
1

Komfovent Left Hand R250F Rotary wheel lay flat horizontal floor unit

Komfovent Left Hand R250F Rotary wheel lay flat horizontal floor unit

Description Komfovent R250 F Left Hand 1156589 Komfovent R250 F Right Hand 1156591 The Komfovent Domekt R-250-F heat recovery unit is a high-quality ceiling or floor mounted rotary wheel unit suitable for new houses up to 150m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R250 F Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 150m2 Airflow rate @100Pa - 250m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A’ energy rating High heat recovery efficiency of up to 86%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted)   BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick  with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency

GBP 2668.14
1

Komfovent Domekt R-700-H Heat Recovery Unit

Komfovent Domekt R-700-H Heat Recovery Unit

Komfovent Domekt R-700-H Heat Recovery Unit Product Part Number Komfovent R700 H Left Hand - 1131533 Komfovent R700 H Right Hand - 1131532 Description The Komfovent Domekt R-700-H heat recovery unit is a high-quality Horizontal floor mounted rotary wheel unit suitable for new houses up to 440m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R700 H Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 440m2 Airflow rate @100Pa – 742 m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 84%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration  Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase

GBP 4817.20
1

Komfovent Domekt R-700-F Heat Recovery Unit

Komfovent Domekt R-700-F Heat Recovery Unit

Komfovent Domekt R-700-F Heat Recovery Unit Product Part Number Komfovent R700 F Left Hand 1086069 Komfovent R700 F Right Hand 1086070 Description The Komfovent Domekt R-700-F heat recovery unit is a high-quality floor or ceiling mounted rotary wheel unit suitable for new houses up to 455m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features- Komfovent R700 F Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 455m2 Airflow rate @100Pa – 764 m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 83%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings  Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet  Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase

GBP 5497.33
1

Komfovent Domekt R-450-V Heat Recovery Unit

Komfovent Domekt R-450-V Heat Recovery Unit

Description Komfovent R450 Left Hand 1035807 Komfovent R450 Right Hand 1035808 The Komfovent Domekt R-450-V heat recovery unit is a high-quality vertical rotary wheel unit suitable for new houses up to 295m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has a A+ rating and is Passive House Approved BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R450 V Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 295m2 Airflow rate @100Pa - 496m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 86%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick  with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 774164415           x1 Komfovent M5 Filter - Domekt R 450 V C6 (470×240×46mm) 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581        

GBP 2837.46
1

Komfovent Domekt R-400-F Heat Recovery Unit

Komfovent Domekt R-400-F Heat Recovery Unit

Description Komfovent R400 F Left Hand 1064289 Komfovent R400 F Right Hand 1064288 The Komfovent Domekt R-400 F heat recovery unit is a high-quality floor / ceiling mounted rotary wheel unit suitable for new houses up to 250m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R400 F Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 250m2 Airflow rate @100Pa - 421m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 83%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581           Komfovent C6.1 User and installer Controller QV-KV-H-SENSOR Quiet-Vent Humidity sensor for Komfovent units QV-BoostSw           1Gang Momentary Boost Switch

GBP 3221.93
1

Komfovent Domekt R-300-V Left Handed Heat Recovery Unit

Komfovent Domekt R-300-V Left Handed Heat Recovery Unit

Description Komfovent R300 V Left Hand 1086594 Komfovent R300 V Right Hand 1086592 The Komfovent Domekt R-300-V heat recovery unit is a high-quality floor mounted rotary wheel unit suitable for new houses up to 185m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R300 V Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 185m2 Airflow rate @100Pa - 310m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A’ energy rating High heat recovery efficiency of up to 86%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick  with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581           Komfovent C6.1 User and installer Controller

GBP 2367.11
1

BSK Scholar 700 Classroom Heat Recovery Unit

BSK Scholar 700 Classroom Heat Recovery Unit

BSK Scholar Classroom Heat Recovery Unit Product Part Number BSK Scholar 700 - Scholar 700 Description Highly efficient heat recovery unit specially designed for classrooms, meeting rooms and offices with C02 demand control operation These units get rid of dust, pollen, spores and other harmful particles to provide 100% fresh filtered air and can either recover up to 95% of normally wasted heat or provide comfort cooling via the free cooling mode BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Fully automatic control Internal Co2 sensors Suitable for offices with up to 24 staff Airflow rate 700m3/h 160m pipe connections Up to 95% heat recovery efficiency. Free cooling mode via By-Pass Unit mounted digital controller Top or rear external pipe spigots 100% full and filtered modulating summer bypass Internal attenuating silencer Air quality pressure sensor Triple filter design of G4, G5 and F7 pollen filter Double walled construction with 25mm sound insulation Anti draft electronic dampers to prevent draft when off Filter warning BMS integration Controllability The BSK Scholar has a unit mounted controller with a passcode that will allow the authorised person to adjust all setting including Air flow settings temperature, Co2 levels Weekley programme Auto Mode Internal Co2 Sensors An internal mounted Co2 will boost the units speed when required BMS Control BMS integration is possible through the Modbus port on top of the unit Boost Input A boost input is positioned on top of the unit Installation Both the Scholar 500/700 can be positioned against an external wall or at an internal wall and ducted to the outside (This method will give a slight decrease in performance due to the longer duct pressure increase, as the units are designed to be used with a short duct run or no ducting. Construction The casing is double walled 0.7mm galvanised steel filled with 25mm of sound insulation in order to keep the sound and heat insulation at the highest level. The outside as well as the inside surfaces of our devices are painted with electrostatic powder paint and deliver a long life, while providing a stylish and clean appearance. Motors Highly efficient backward curved EC fans for maximum efficiency and performance Filtration A total of 3 filters are fitted as standard to supply superior filtration 1 x G4 filter to exhaust air to outside 1 x G4 pre filter to room air supply 1 x F7 post filter to room air supply Summer By-Pass The BSK Scholar range of units have a 100% summer by-Pass Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger The Highest performing heat recovery exchanger that can recover up to 95% of otherwise lost heat Frost Protection The unit has a frost protection programme Silencer The BSK Scholar as an internal silencer at the fresh air outlet of our device that allows silent operation which provides a quiet working environment for classrooms or offices Orientation Only one orientation is possible Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The unit is floor mounted Warranty BSK offer a 2-year Parts warranty Further Information Further information is available on the Manufactures website

GBP 2992.08
1

Komfovent R600V Rotary wheel vertical unit (use C6 controller)

Komfovent R600V Rotary wheel vertical unit (use C6 controller)

Description Komfovent R600 V Left Hand 1151739 Komfovent R600 V Right Hand 1151738 The Komfovent Domekt R-600-V heat recovery unit is a high-quality floor / ceiling mounted rotary wheel unit suitable for new houses up to 390m2 that has advanced Wi-Fi controllability and are suitable for very cold climates of down to -30° This unit has an (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems, Key features- Komfovent R600 V Interactive Wi-Fi Smart control Passive house approved C6M Digital controller* Next Generation rotary heat exchanger Suitable for home sizes up to 390m2 Airflow rate @100Pa – 669 m3/h Optional direct connection to kitchen cooker hood Super Quiet with insulated construction No drain or pre-heater required Highly efficient EC fans 100% summer bypass M5 filtration ‘A+’ energy rating High heat recovery efficiency of up to 84%. On demand control via optional room or duct sensor options Fireplace and holiday settings CAV -VAV-DCV airflow control Plug and play easy installation Optional Humidity control Optional F7 filtration Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required App Control Wall controller (optional) 8 preset modes. Intelligent energy saving algorithms. Automatic air quality control with optional AQ sensor. Extensive weekly schedule. External Control Ability to control via a web browser for remote monitoring and repair Integration into a smart home management system. (BMS) parameters by connecting additional sensors. Optional wall controller 0-10v and 0v connections Optional boost switch Optional humidity sensor (duct mounted) BMS Control Implemented BACnet and Modbus protocols enable simple connection into Building Management System as a result whole buildings engineering systems can be controlled at a single access point. Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish (RAL9003) and EPP internal casing, The airtight doors are 50mm thick with thermal locks Motors The fan motors are low energy EC fans of A+ rating and are protected from humidity and dust as well as being equipped with long-life bearings Filtration 2 x G5 filters are fitted to the unit that are easy to replace Optional F7 to air supply Summer By-Pass The Komfovent range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger Frost Protection There is no condensation drain and Frost protection is not required unless below - 20° Orientation The units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket Accessories 712201292           Komfovent SIPHON for Condensate Drain DN32 745201581           Komfovent C6.1 User and installer Controller QV-KV-H-SENSOR Quiet-Vent

GBP 3699.45
1

BSK Scholar 500 Classroom Heat Recovery Unit

BSK Scholar 500 Classroom Heat Recovery Unit

BSK Scholar Classroom Heat Recovery Unit Product Part Number BSK Scholar 500 - Scholar 500 Description Highly efficient heat recovery unit specially designed for classrooms, meeting rooms and offices with C02 demand control operation These units get rid of dust, pollen, spores and other harmful particles to provide 100% fresh filtered air and can either recover up to 95% of normally wasted heat or provide comfort cooling via the free cooling mode BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Fully automatic control Internal Co2 sensors Suitable for offices with up to 15 staff Airflow rate 500m3/h 160m pipe connections Up to 95% heat recovery efficiency. Free cooling mode via By-Pass Unit mounted digital controller Top or rear external pipe spigots 100% full and filtered modulating summer bypass Internal attenuating silencer Air quality pressure sensor Triple filter design of G4, G5 and F7 pollen filter Double walled construction with 25mm sound insulation Anti draft electronic dampers to prevent draft when off Filter warning BMS integration Controllability The BSK Scholar has a unit mounted controller with a passcode that will allow the authorised person to adjust all setting including Air flow settings temperature, Co2 levels Weekley programme Auto Mode Internal Co2 Sensors An internal mounted Co2 will boost the units speed when required BMS Control BMS integration is possible through the Modbus port on top of the unit Boost Input A boost input is positioned on top of the unit Installation Both the Scholar 500/700 can be positioned against an external wall or at an internal wall and ducted to the outside (This method will give a slight decrease in performance due to the longer duct pressure increase, as the units are designed to be used with a short duct run or no ducting. Construction The casing is double walled 0.7mm galvanised steel filled with 25mm of sound insulation in order to keep the sound and heat insulation at the highest level. The outside as well as the inside surfaces of our devices are painted with electrostatic powder paint and deliver a long life, while providing a stylish and clean appearance. Motors Highly efficient backward curved EC fans for maximum efficiency and performance Filtration A total of 3 filters are fitted as standard to supply superior filtration 1 x G4 filter to exhaust air to outside 1 x G4 pre filter to room air supply 1 x F7 post filter to room air supply Summer By-Pass The BSK Scholar range of units have a 100% summer by-Pass Low Noise Levels With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet Heat Exchanger The Highest performing heat recovery exchanger that can recover up to 95% of otherwise lost heat Frost Protection The unit has a frost protection programme Silencer The BSK Scholar as an internal silencer at the fresh air outlet of our device that allows silent operation which provides a quiet working environment for classrooms or offices Orientation Only one orientation is possible Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The unit is floor mounted Warranty BSK offer a 2-year Parts warranty Further Information Further information is available on the Manufactures website

GBP 2683.20
1

DucoBox Energy Comfort Plus D350

DucoBox Energy Comfort Plus D350

Description The DucoBox Energy Comfort Plus D350 is a high quality MVHR unit manufactured in Belgium and developed with the aim of guaranteeing an even quieter operation with an option of 2 zone ventilation With high quality construction with large list of accessories and unique options including zonal control and optional connectivity to a phone APP or BMS allows for a bespoke system designed to your need This unit is ideally suited for high quality new build or high-end renovation to 2-to-3-bedroom housing with a maximum floor area of 200m2 BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems   Optional Compact external 2-zone control The 2-zone control for the supply to the home is provided by the compact iAV valves. A valve is provided for each branch to the various zones. With external 2-zone control, the house is divided into a day and night zone. This zonal control is based on CO2 and humidity. It only provides ventilation where and when needed, in the right amount. Zonal ventilation ensures maximum energy savings and increases acoustic and thermal comfort. Discover the 4 benefits of the multi-zone valve: 1) Compact installation The multi-zone valves are installed in the supply ducts (D125 or D160) and require only 78 mm clearance. They can be used at any point in the duct system. The installer can make his own choice according to ease of installation, accessibility, … 2) Energy savings When using zonal ventilation, we don't ventilate a whole home but only the rooms where people actually are. This means our systems need to work less hard, which results in substantial lower energy consumption (40%) from the ventilation unit as well as the heating system. 3) Quieter operation Reduced motor rotation which ensures a significantly quieter operation (30%). 4) Enhanced thermal comfort Thanks to the unique principle of comfort temperature setting, you can define the temperature for each zone yourself, for example 21.5° for the day zone and 18° for the night zone. This provides significantly increased thermal comfort. *The iAV valves require 24v power from the additional Duco power supply to operate   Motors With the Duco high performance constant pressure motors, you can achieve a more constant airflow irrespective of resistance and a 50% saving on calibration time Electronic orientation change This unit is very user-friendly because physical interventions are not necessary. The left/right exchange is carried out 100% by software thanks to a patented principle of double by-pass. External Control Components The DucoBox Energy Comfort can be linked with the following external control components. Humidity Sensor This sensor is placed in the extract air duct (ETA) of the DucoBox Energy Comfort and centrally measures the humidity of the air extracted from the house. Smart Demand User controller There are 3 types of User controllers are available in either wireless or wired versions and in black or white face plates Remote control (popular option) Remote Control with CO2 sensor Remote control with Humidity Sensor The wired version will require the additional 24v Power supply Duco Connectivity Board The Duco Connectivity Board enables the Duco Installation App to be used on your phone or tablet This PCB also enables interfacing for home automation and building management systems via REST API (locally or via the cloud) or Modbus TCP (locally). Both possible via Ethernet and Wi-Fi. CO2 Room Sensors The CO2 Room sensor is available in either wireless or wired versions and with black or white face plates Switch Sensor The Switch Sensor can perform either or both of the following functions: Switch detection: the ventilation system will perform a function when closing a (two-pole) dry contact. Suitable for toilet detection or overrule setting (only one function per switch sensor). Repeater: the switch sensor is ideally suited as a repeater

GBP 2531.09
1

DucoBox Energy Comfort Plus D450

DucoBox Energy Comfort Plus D450

DucoBox Energy Comfort Plus D450 The DucoBox Energy Comfort Plus D450 is a high quality MVHR unit manufactured in Belgium and developed with the aim of guaranteeing an even quieter operation with an option of 2 zone ventilation With high quality construction with large list of accessories and unique options including zonal control and optional connectivity to a phone APP or BMS allows for a bespoke system designed to your need This unit is ideally suited for high quality new build or high-end renovation to 3-to4-bedroom housing with a maximum floor area of 260m2 BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems Optional Compact external 2-zone control The 2-zone control for the supply to the home is provided by the compact iAV valves. A valve is provided for each branch to the various zones. With external 2-zone control, the house is divided into a day and night zone. This zonal control is based on CO2 and humidity. It only provides ventilation where and when needed, in the right amount. Zonal ventilation ensures maximum energy savings and increases acoustic and thermal comfort. Discover the 4 benefits of the multi-zone valve: 1) Compact installation The multi-zone valves are installed in the supply ducts (D125 or D160) and require only 78 mm clearance. They can be used at any point in the duct system. The installer can make his own choice according to ease of installation, accessibility, … 2) Energy savings When using zonal ventilation, we don't ventilate a whole home but only the rooms where people actually are. This means our systems need to work less hard, which results in substantial lower energy consumption (40%) from the ventilation unit as well as the heating system. 3) Quieter operation Reduced motor rotation which ensures a significantly quieter operation (30%). 4) Enhanced thermal comfort Thanks to the unique principle of comfort temperature setting, you can define the temperature for each zone yourself, for example 21.5° for the day zone and 18° for the night zone. This provides significantly increased thermal comfort. *The iAV valves require 24v power from the additional Duco power supply to operate Motors With the Duco high performance constant pressure motors, you can achieve a more constant airflow irrespective of resistance and a 50% saving on calibration time Electronic orientation change This unit is very user-friendly because physical interventions are not necessary. The left/right exchange is carried out 100% by software thanks to a patented principle of double by-pass. External Control Components The DucoBox Energy Comfort can be linked with the following external control components. Humidity Sensor This sensor is placed in the extract air duct (ETA) of the DucoBox Energy Comfort and centrally measures the humidity of the air extracted from the house. Smart Demand User controller There are 3 types of User controllers are available in either wireless or wired versions and in black or white face plates Remote control (popular option) Remote Control with CO2 sensor Remote control with Humidity Sensor The wired version will require the additional 24v Power supply Duco Connectivity Board The Duco Connectivity Board enables the Duco Installation App to be used on your phone or tablet This PCB also enables interfacing for home automation and building management systems via REST API (locally or via the cloud) or Modbus TCP (locally). Both possible via Ethernet and Wi-Fi. CO2 Room Sensors The CO2 Room sensor is available in either wireless or wired versions and with black or white face plates Switch Sensor The Switch Sensor can perform either or both of the following functions: Switch detection: the ventilation system will perform a function when closing a (two-pole) dry contact. Suitable for toilet detection or overrule setting (only one function per switch sensor). Repeater: the switch sensor is ideally suited as a repeater to strengthen the signal in the event of RF communication problems. In that case the switch sensor must be positioned in such a way that the distance to be bridged and/or interference by obstacles is reduced. Discover the 4 benefits of the multi-zone valve: 1) Compact installation The multi-zone valves are installed in the supply ducts (D125 or D160) and require only 78 mm clearance. They can be used at any point in the duct system.

GBP 2824.45
1

DucoBox Energy Comfort Plus D550

DucoBox Energy Comfort Plus D550

DucoBox Energy Comfort Plus D550 The DucoBox Energy Comfort Plus D550 is a high quality MVHR unit manufactured in Belgium and developed with the aim of guaranteeing an even quieter operation with an option of 2 zone ventilation With high quality construction with large list of accessories and unique options including zonal control and optional connectivity to a phone APP or BMS allows for a bespoke system designed to your need This unit is ideally suited for high quality new build or high-end renovation to 4-to-5-bedroom housing with a maximum floor area of 325m2 BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems Optional Compact external 2-zone control The 2-zone control for the supply to the home is provided by the compact iAV valves. A valve is provided for each branch to the various zones. With external 2-zone control, the house is divided into a day and night zone. This zonal control is based on CO2 and humidity. It only provides ventilation where and when needed, in the right amount. Zonal ventilation ensures maximum energy savings and increases acoustic and thermal comfort. Discover the 4 benefits of the multi-zone valve: 1) Compact installation The multi-zone valves are installed in the supply ducts (D125 or D160) and require only 78 mm clearance. They can be used at any point in the duct system. The installer can make his own choice according to ease of installation, accessibility, … 2) Energy savings When using zonal ventilation, we don't ventilate a whole home but only the rooms where people actually are. This means our systems need to work less hard, which results in substantial lower energy consumption (40%) from the ventilation unit as well as the heating system. 3) Quieter operation Reduced motor rotation which ensures a significantly quieter operation (30%). 4) Enhanced thermal comfort Thanks to the unique principle of comfort temperature setting, you can define the temperature for each zone yourself, for example 21.5° for the day zone and 18° for the night zone. This provides significantly increased thermal comfort. *The iAV valves require 24v power from the additional Duco power supply to operate Motors With the Duco high performance constant pressure motors, you can achieve a more constant airflow irrespective of resistance and a 50% saving on calibration time Electronic orientation change This unit is very user-friendly because physical interventions are not necessary. The left/right exchange is carried out 100% by software thanks to a patented principle of double by-pass. External Control Components The DucoBox Energy Comfort can be linked with the following external control components. Humidity Sensor This sensor is placed in the extract air duct (ETA) of the DucoBox Energy Comfort and centrally measures the humidity of the air extracted from the house. Smart Demand User controller There are 3 types of User controllers are available in either wireless or wired versions and in black or white face plates Remote control (popular option) Remote Control with CO2 sensor Remote control with Humidity Sensor The wired version will require the additional 24v Power supply Duco Connectivity Board The Duco Connectivity Board enables the Duco Installation App to be used on your phone or tablet This PCB also enables interfacing for home automation and building management systems via REST API (locally or via the cloud) or Modbus TCP (locally). Both possible via Ethernet and Wi-Fi. CO2 Room Sensors The CO2 Room sensor is available in either wireless or wired versions and with black or white face plates Switch Sensor The Switch Sensor can perform either or both of the following functions: Switch detection: the ventilation system will perform a function when closing a (two-pole) dry contact. Suitable for toilet detection or overrule setting (only one function per switch sensor). Repeater: the switch sensor is ideally suited as a repeater to strengthen the signal in the event of RF communication problems. In that case the switch sensor must be positioned in such a way that the distance to be bridged and/or interference by obstacles is reduced. Discover the 4 benefits of the multi-zone valve: 1) Compact installation The multi-zone valves are installed in the supply ducts (D125 or D160) and require only 78 mm clearance. They can be used at any point in the duct system.

GBP 3411.17
1