126 results (0,17562 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Komfovent Domekt R-700-V Heat Recovery Unit

Komfovent Domekt R-700-V Heat Recovery Unit

Komfovent Domekt R-700-V Heat Recovery Unit Product Part Number Komfovent Left Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-L Komfovent Right Hand R700V Rotary wheel vertical unit - Domekt-R-700-V-R Description The Komfovent Domekt R-700-V heat recovery unit is a high-quality rotary wheel unit suitable for new houses up to 480m2. Technical Features Suitable for house sizes up 480m2 Maximum airflow rate - 850m3/h Airflow rate @ 100Pa - 764m3/h Optional direct connection to kitchen cooker hood Provides up to 83% heat recovery Sound level @3m - 34 dB(A) Weight - 114kg Dimensions W x H x D – 1070mm x 950mm x 645mm Duct diameter – 250mm Controllability The Domekt units feature an integrated smart control system allowing you to control your system without constant adjustments via the Komfovent Home application on your home computer or mobile device, the unit also has an additional hard wired digital remote control if required Construction Domekt heat recovery units are double protected from corrosion. The units are constructed of galvanised steel with a powder coated finish. The fan motors are protected from humidity and dust as well as being equipped with long-life bearings.

GBP 4168.82
1

Mitsubishi Lossnay-VL350 Units

Mitsubishi Lossnay-VL350 Units

Part Numbers Mitsubishi VL-350CZPVU-L-E (Left hand) Mitsubishi VL-350CZPVU-R-E (Right hand) Description The Mitsubishi VL-350 is a quality unit with the advantage of a unit mounted controller with 5 years part warranty and provides a maximum flow rate of 350m3/hr suitable for a house up to 210 m2 floor area with up to 6 kitchens & bathrooms BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Mitsubishi VL-350 Suitable for floor areas up to 210m2 Delivers an airflow rate of up to 350 m³/hour @ 150 Pa Unit mounted LCD controller Ultra quiet with as low as 15dB High heat recovery efficiency of up to 90%. On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G3 filters Galvanised steel casing with EPP internal lining 5-year warranty* (Listed parts Only) 'A+' energy rating Left hand right oriented models available Optional Wi-Fi control UK/CA marked Surge protected Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace Optional ePM2.5 50% to air supply Optional NOX 90% filter to air supply CONTROL OPTIONS The Mitsubishi VL units are controlled by one of the following: Control Via Unit mounted digital controller 0-10v sensor Volt free contacts Additional external sensors achieving on-demand ventilation Switched live signal from remote switches Optional wall controller (P-RCC-E) Optional Wi-Fi integration to phone (MAC-5671F-E) Optional Wi-Fi with additional accessory - MAC-5617F-E   Summer By-Pass The VL range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-3°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Orientation The Mitsubishi Lossnay VL units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket

GBP 1202.95
1

Ebac VA32

Ebac VA32

EBAC VA32 R (Right) EBAC VA32 L (Left) Description The EBAC VA32 is a quality Uk manufactured MVHR unit with good controllability and provides a maximum flow rate of 245m3/hr suitable for a house up to 150 m2 floor area with up to 3 kitchens & bathrooms Controllability is provided by a digital touch screen controller that comes complete with the unit and has internal humidity & Co2 sensors for demand-controlled ventilation BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – EBAC VA32 Digital Touch Screen controller Smart control option Suitable for floor areas up to 172m2 Delivers an airflow rate of up to 288 m³/hour @ 100 Pa High heat recovery efficiency of up to 88%. Internal humidity sensor for automatic speed control Internal Co2 and temperature sensors On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer 2 x G4 filters Galvanised steel casing with 32mm thermal insulation 5-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available Adjustable feet Sap Appendix Q (BRE) approved UK/CA marked Surge protected Integral Humidity Sensor The EBAC unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace CONTROL OPTIONS The EBAC units are controlled by one of the following: Digital touchscreen Controller On-demand ventilation through built-in humidity & Co2 sensors Switched live signal from light / remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 88% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The EBAC units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The EBAC VA32 units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of double skin powder coated galvanised steel with a 32mm thermal insulation Mounting The units are wall mounted as standard and are supplied with a wall bracket If floor mounting it is recommended to elevate the unit by 150mm to allow access to the condensation drain The four feet are adjustable to allow for any uneven surface Accessories EBAC VA32 Replacement filters - VA32-G4FILTER

GBP 1200.00
1

Panasonic Heat Recovery Ventilation System - PAW-A2W-VENTA

Panasonic Heat Recovery Ventilation System - PAW-A2W-VENTA

Panasonic Heat Recovery Ventilation Unit - PAW-A2W-VENTA Heat recovery ventilation unit is designed not only to provide a good indoor air quality, but it is also designed to recovery heat that would otherwise be lost throughout ventilation. These heat recovery ventilation systems are used in low energy home to assist in the retention of heat. Key Features Designed for areas up to 140m2 High energy-efficiency rotary heat exchanger with EC – technology fans Moisture transfer function to minimize condensation in supply air during wintertime The built-in humidity sensor in extract air can be used for demand control Control via touch display and start-up wizard for easy commissioning Modbus communication via RS-485 Option to control and Aquarea H or J generation heat pump from PAW-A2W-VENTA control panel (PAW-AW-MSB-H and PAW-VEN-ACCPCB required) Technical Features Weight – 46kg Dimensions 500mm x 598mm x 450mm 125mm duct diameter 100% Summer Bypass Passive House Approved Provides up to 83% heat recovery efficiency Control User-Friendly Interface All settings and features accessible via a control panel, integrated into the front cover. The option for connecting one or more external control panels is available. Colour touch screen with a user-friendly interface Manual and auto mode or chose preferred settings for the pre-configured user modes If Aquarea H and J generations heat pumps are connected with PAW-A2W-VENTA, the heat pump control option appear on the home screen in a separate tab

GBP 1996.65
1

Nuaire MRXBOXAB-ECO4-1Z With Acoustic & Silent Box

Nuaire MRXBOXAB-ECO4-1Z With Acoustic & Silent Box

Description Nuaire MRXBOXAB-ECO4B-1Z Opposite Handed MRXBOXAB-ECO4B-1Z-OH The Nuaire MRXBOXAB-ECO4B-1Z consists of the ECO4 MVHR unit, attenuators and flexible duct connectors entirely encased in an all-in-one aesthetically pleasing acoustic enclosure This kit provides significant reduction in cased-radiated noise The Nuaire MRXBOXAB-ECO4B provides a maximum flow rate of 555m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO4B Acoustic enclosure on unit and Attenuator top box Attenuators and flexible duct connectors Suitable for floor areas up to 330m2 Delivers an airflow rate of up to 555 m³/hour @ 100 Pa High heat recovery efficiency of up to 94%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket

GBP 5063.84
1

Special Offer - 5kw Panasonic Aquarea MONO-BLOC Air To Water Heat Pump

Special Offer - 5kw Panasonic Aquarea MONO-BLOC Air To Water Heat Pump

Panasonic Aquarea High Performance Mono-Bloc Air to Water Heat Pump Single Phase J Generation Heating and Cooling with R32 refrigerant  Panasonic air-to-water heat pump is an eco-friendly, affordable, and safe way to heat your home when compared to traditional electrical, gas and oil heating systems that are now being phased out of production due to climate change regulations The High-Performance Mono-Bloc unit is a popular choice for normal ambient operating temperatures of up to -7° and to a max operating temperature of -20° The Monobloc configuration keeps all components of the heat pump within a single outdoor enclosure. Two pipes carry water between the outdoor unit and the interior portions of the overall system. As there are no external refrigerant pipes the units are pre-charged and would provide the simplest installation This system will also require separately a Due Pre-Plumbed water cylinder and buffer tank Market-leading Seven-year Parts and Labour warranty on Panasonic heat pumps if installed and serviced by an approved Panasonic engineer Key Features Ideal for new builds 7-year Parts and Labour Warranty* From 5kW to 9kW – using the latest R32 refrigerant Heat Pumps for superior performance Passive house approved and suitable for NZEB buildings Recommend being used with DUE Pre-plumbed water cylinder Can be connected to Underfloor heating or radiators Can be connected to fan coil units to provide cooling Can be integrated with an HVHR unit (heat recovery Unit) Can be connected to HIT Solar panels New J Generation for up to 65° hot water supply Suitable for up to minus –28° outdoor temperature No extra buffer tank required Aquaria Smart cloud control, hard-wired controller and BMS options 80% saving on heating expenses compared to electrical heaters. Remote maintenance Built-in Flow Meter and magnetic water filter Aquarea Smart Cloud is the most advanced heating control for today and for the future. Aquarea can be connected to the Cloud with CZ-TAW1, enabling both end-user control and remote maintenance by service partners. Panasonic All in One air to water heat pumps should be installed by a qualified installer and preferably an approved Panasonic heat pump engineer To purchase this heat pump, we will require the installers details and current F-Gas number before it is dispatched If you are an installer, please sign up with us to become an approved Panasonic installer and receive free training, Rewards and be able to provide up to a 7-year part and labour warranty to your customers and possible sales leads and installation work * Market-leading Seven-year Parts and Labour warranty on Panasonic heat pumps if installed and serviced by an approved Panasonic engineer

GBP 2310.01
1

Nuaire MRXBOXAB-ECO5B Heat Recovery Unit

Nuaire MRXBOXAB-ECO5B Heat Recovery Unit

Nuaire MRXBOXAB-ECO5B Opposite Handed MRXBOXAB-ECO5B-OH Description The Nuaire MRXBOXAB-ECO5B provides a maximum flow rate of 495m3/hr suitable for a house up to 295 m2 floor area with up to 8 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO5B Suitable for floor areas up to 295m2 Delivers an airflow rate of up to 495 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV4 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF4 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily

GBP 1782.32
1

Nuaire MRXBOXAB-ECO3B Heat Recovery System

Nuaire MRXBOXAB-ECO3B Heat Recovery System

Description Nuaire MRXBOXAB-ECO3B Opposite Handed MRXBOXAB-ECO3B-OH The Nuaire MRXBOXAB-ECO3B provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 6 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX95 range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO3B Suitable for floor areas up to 190m2 Delivers an airflow rate of up to 320 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)  CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV3 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF3 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the

GBP 1303.26
1

Nuaire MRXBOXAB-ECO3-1Z with Accoustic Enclosure & Silent Box

Nuaire MRXBOXAB-ECO3-1Z with Accoustic Enclosure & Silent Box

Description Nuaire MRXBOXAB-ECO3-1Z Opposite Handed MRXBOXAB-ECO3-1Z-OH The Nuaire MRXBOXAB-ECO3-1Z consists of the ECO3 MVHR unit, attenuators and flexible duct connectors entirely encased in an all-in-one aesthetically pleasing acoustic enclosure This kit provides significant reduction in cased-radiated noise The Nuaire MRXBOXAB-ECO3B provides a maximum flow rate of 320m3/hr suitable for a house up to 190 m2 floor area with up to 6 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX95 range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO3 Acoustic enclosure on unit and Attenuator top box Attenuators and flexible duct connectors Suitable for floor areas up to 190m2 Delivers an airflow rate of up to 320 m³/hour @ 100 Pa High heat recovery efficiency of up to 90%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)  CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature

GBP 2960.52
1

Nuaire MRXBOXAB-ECO4 Heat Recovery System

Nuaire MRXBOXAB-ECO4 Heat Recovery System

Nuaire MRXBOXAB-ECO4B Opposite Handed MRXBOXAB-ECO4B-OH Description The Nuaire MRXBOXAB-ECO4B provides a maximum flow rate of 555m3/hr suitable for a house up to 330 m2 floor area with up to 10 kitchens & bathrooms Controllability is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO4B Suitable for floor areas up to 330m2 Delivers an airflow rate of up to 555 m³/hour @ 100 Pa High heat recovery efficiency of up to 94%. Internal humidity sensor for automatic speed control 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G4 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Optional Acoustic enclosures Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket An optional angled mounting bracket MRXBOX-AV4 are fitted to the bottom of the unit are available First Fix Solution MRXBOX-FF4 Nuair’s First Fix box is fixed to the underside of the floor slab at first fix stage of the build. The box has four airflow chambers with optional positions for 204x60mm spigots. Ceilings can then be boarded within the cupboard space easily and quickly

GBP 2403.14
1

BSK Plus 25 Commercial Heat Recovery Unit

BSK Plus 25 Commercial Heat Recovery Unit

BSK Plus 25 Commercial Heat Recovery Unit Product Part Number BSK 2500 m3h/r Horizontal MVHR - digital control - 350mm - BRHR Plus 25 BSK 2500 m3h/r Horizontal MVHR - digital control - 350mm - 10kw pre heater - BRHR Plus 25+pre heater BSK 2500 m3h/r Horizontal MVHR - digital control - 350mm - 16kw post heater - BRHR Plus 25+post heater BSK 2500 m3h/r Horizontal MVHR - digital control - 350mm - 16kw water heater - BRHR Plus 25+water heater Key Features Thin, flat profile is perfect for ceiling mounting. Self-motorized EC fans Aluminum plated, counter-flow heat exchangers with up to 90% high thermal efficiency. Provides up to 85% heat recovery Plug and play electrical connections 100% Summer bypass Highly efficient aluminium heat exchanger Thin, flat profile is perfect for ceiling mounting EC fans with lower power consumptions 2 x G4 filters with side panel allowing easy access for maintenance Technical Features Airflow capacity - 2000 m3h/r @ 100Pa BSK Plus Commercial Heat Recovery units are available with a preheater, post heater or a water heater H x W x L: 540mm x 1650mm x 1700mm 400mm duct connections Optional Accessories Water Heater Pre-Heater Post Heater Control Options Free cooling Boost mode De-frost mode Automated weekly schedules Temperature or humidity trigged automation Boost Mode Boost mode makes the BSK Heat Recovery Unit to run at full capacity in order to quickly ventilate the surroundings. This mode can be triggered in various ways. Built-in humidity sensor can detect the humidity level of the returning air and automatically initiate Boost Mode when a set level of humidity is reached to quickly dissipate the moisture to prevent it building up. Alternatively, if an external aspirator is connectedto the “boost port” of the device, when the aspirator is turned on, the device also enters Boost Mode to help with the

GBP 6750.80
1

BSK Plus 30 Commercial Heat Recovery Unit

BSK Plus 30 Commercial Heat Recovery Unit

BSK Plus 30 Commercial Heat Recovery Unit Product Part Number BSK 3000 m3h/r Horizontal MVHR - digital control - 350mm - BRHR Plus 30 BSK 3000 m3h/r Horizontal MVHR - digital control - 350mm - 10kw pre heater - BRHR Plus 30+pre heater BSK 3000 m3h/r Horizontal MVHR - digital control - 350mm - 23kw post heater - BRHR Plus 30+post heater BSK 3000 m3h/r Horizontal MVHR - digital control - 350mm - 23kw water heater - BRHR Plus 30+water heater Key Features Thin, flat profile is perfect for ceiling mounting. Self-motorized EC fans Aluminum plated, counter-flow heat exchangers with up to 90% high thermal efficiency. Provides up to 85% heat recovery Plug and play electrical connections 100% Summer bypass Highly efficient aluminium heat exchanger Thin, flat profile is perfect for ceiling mounting EC fans with lower power consumptions 2 x G4 filters with side panel allowing easy access for maintenance Technical Features Airflow capacity - 3000 m3h/r @ 100Pa BSK Plus Commercial Heat Recovery units are available with a preheater, post heater or a water heater H x W x L: 675mm x 1650mm x 1850mm 450mm duct connections Optional Accessories Water Heater Pre-Heater Post Heater Control Options Free cooling Boost mode De-frost mode Automated weekly schedules Temperature or humidity trigged automation Boost Mode Boost mode makes the BSK Heat Recovery Unit to run at full capacity in order to quickly ventilate the surroundings. This mode can be triggered in various ways. Built-in humidity sensor can detect the humidity level of the returning air and automatically initiate Boost Mode when a set level of humidity is reached to quickly dissipate the moisture to prevent it building up. Alternatively, if an external aspirator is connectedto the “boost port” of the device, when the aspirator is turned on, the device also enters Boost Mode to help with the

GBP 7069.67
1

Airflow Adroit DV50 Left Hand Heat Recovery Unit - EPH

Airflow Adroit DV50 Left Hand Heat Recovery Unit - EPH

Airflow Adroit DV50 Right Hand Heat Recovery Unit EPH Showroom Clearance Sale* DV50 Adroit is a ventilation unit with state-of-the-art technology suitable for small houses up to 80 m2. Designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications. Control your indoor air environment at home or on the go via the Adroit 'Cloud' by smartphone, tablet, or PC. Having the latest, low energy EC fan technology, the DV50 Adroit complies with the ErP 2016 and the proposed ErP 2018 standards. The unit comes with an outstanding 5 years warranty*, is SAP Appendix Q eligible. This EPH unit features a post heater *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging KEY FEATURES: Extracts up to 187 m3/hr @ 100 Pa Up to 90% thermal efficiency Automatic, 100% bypass Triple filter design 5 year warranty* 'A' energy rating Internet control by smartphone, tablet, or PC Passive house certified MAIN FEATURES: Supply and extract air ventilation with heat recovery Galvanised steel, powder coated double-skin casing Auto cut-out switch for extra safety BMS connection via MODBUS or KNX (optional) Boost operation with timer On demand control via room or duct sensor options Complies with the NHBC criteria and ErP 2016 standards SAP Appendix Q eligible. Meets building regulations Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Optional smart frost protection Optional built-in electric post heater Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists

GBP 1056.00
1

BSK Plus 15 Commercial Heat Recovery Unit

BSK Plus 15 Commercial Heat Recovery Unit

BSK Plus 15 Commercial Heat Recovery Unit Product Part Number BSK 1500m3h/r Horizontal MVHR - digital control - 250mm - BRHR Plus 15 BSK 1500m3h/r Horizontal MVHR - digital control - 250mm - 6kw pre heater - BRHR Plus 15+pre-heater BSK 1500m3h/r Horizontal MVHR - digital control - 250mm - 11kw post heater - BRHR Plus 15+post heater BSK 1500m3h/r Horizontal MVHR - digital control - 250mm - 10kw water heater - BRHR Plus 15+water heater Key Features Thin, flat profile is perfect for ceiling mounting. Self-motorized EC fans Aluminum plated, counter-flow heat exchangers with up to 90% high thermal efficiency. Provides up to 85% heat recovery Plug and play electrical connections 100% Summer bypass Highly efficient aluminium heat exchanger Thin, flat profile is perfect for ceiling mounting EC fans with lower power consumptions 2 x G4 filters with side panel allowing easy access for maintenance Weight - 242 kg Technical Features Airflow capacity - 1500 m3h/r @ 100Pa BSK Plus Commercial Heat Recovery units are available with a preheater, post heater or a water heater H x W x D: 450mm x 1200mm x 1550mm 310mm duct connections Optional Accessories Water Heater Pre-Heater Post Heater Control Options Free cooling Boost mode De-frost mode Automated weekly schedules Temperature or humidity trigged automation Boost Mode Boost mode makes the BSK Heat Recovery Unit to run at full capacity in order to quickly ventilate the surroundings. This mode can be triggered in various ways. Built-in humidity sensor can detect the humidity level of the returning air and automatically initiate Boost Mode when a set level of humidity is reached to quickly dissipate the moisture to prevent it building up. Alternatively, if an external aspirator is connectedto the “boost

GBP 5024.76
1

BSK Plus 20 Commercial Heat Recovery Unit

BSK Plus 20 Commercial Heat Recovery Unit

BSK Plus 20 Commercial Heat Recovery Unit Product Part Number BSK 2000 m3h/r Horizontal MVHR - digital control - 300mm - BRHR Plus 20 BSK 2000 m3h/r Horizontal MVHR - digital control - 300mm - 6kw pre heater - BRHR Plus 20+pre heater BSK 2000 m3h/r Horizontal MVHR - digital control - 300mm - 14kw post heater - BRHR Plus 20+post heater BSK 2000 m3h/r Horizontal MVHR - digital control - 300mm - 14kw water heater - BRHR Plus 20+water heater Key Features Thin, flat profile is perfect for ceiling mounting. Self-motorized EC fans Aluminum plated, counter-flow heat exchangers with up to 90% high thermal efficiency. Provides up to 85% heat recovery Plug and play electrical connections 100% Summer bypass Highly efficient aluminium heat exchanger Thin, flat profile is perfect for ceiling mounting EC fans with lower power consumptions 2 x G4 filters with side panel allowing easy access for maintenance Technical Features Airflow capacity - 2000 m3h/r @ 100Pa BSK Plus Commercial Heat Recovery units are available with a preheater, post heater or a water heater H x W x L: 540mm x 1450mm x 1650mm 355mm duct connections Optional Accessories Water Heater Pre-Heater Post Heater Control Options Free cooling Boost mode De-frost mode Automated weekly schedules Temperature or humidity trigged automation Boost Mode Boost mode makes the BSK Heat Recovery Unit to run at full capacity in order to quickly ventilate the surroundings. This mode can be triggered in various ways. Built-in humidity sensor can detect the humidity level of the returning air and automatically initiate Boost Mode when a set level of humidity is reached to quickly dissipate the moisture to prevent it building up. Alternatively, if an external aspirator is connectedto the “boost port” of the device, when the aspirator is turned on, the device also enters Boost Mode to help with the

GBP 6336.28
1

Airflow Adroit DV50 Right Hand Heat Recovery Unit

Airflow Adroit DV50 Right Hand Heat Recovery Unit

Airflow Adroit DV50 Right Hand Heat Recovery Unit Showroom Clearance Sale* DV50 Adroit is a ventilation unit with state-of-the-art technology suitable for small houses up to 80 m2. Designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications. Control your indoor air environment at home or on the go via the Adroit 'Cloud' by smartphone, tablet, or PC. Having the latest, low energy EC fan technology, the DV50 Adroit complies with the ErP 2016 and the proposed ErP 2018 standards. The unit comes with an outstanding 5 years warranty*, is SAP Appendix Q eligible. *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging KEY FEATURES: Extracts up to 187 m3/hr @ 100 Pa Up to 90% thermal efficiency Automatic, 100% bypass Triple filter design 5 year warranty* 'A' energy rating Internet control by smartphone, tablet, or PC Passive house certified MAIN FEATURES: Supply and extract air ventilation with heat recovery Galvanised steel, powder coated double-skin casing Auto cut-out switch for extra safety BMS connection via MODBUS or KNX (optional) Boost operation with timer On demand control via room or duct sensor options Complies with the NHBC criteria and ErP 2016 standards SAP Appendix Q eligible. Meets building regulations Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Optional smart frost protection Optional built-in electric post heater Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of systems for domestic and commercial applications Authorised Airflow distributors

GBP 960.00
1

Airflow Adroit DV50 Left Hand Heat Recovery Unit

Airflow Adroit DV50 Left Hand Heat Recovery Unit

Airflow Adroit DV50 Right Hand Heat Recovery Unit Showroom Clearance Sale* DV50 Adroit is a ventilation unit with state-of-the-art technology suitable for small houses up to 80 m2. Designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications. Control your indoor air environment at home or on the go via the Adroit 'Cloud' by smartphone, tablet, or PC. Having the latest, low energy EC fan technology, the DV50 Adroit complies with the ErP 2016 and the proposed ErP 2018 standards. The unit comes with an outstanding 5 years warranty*, is SAP Appendix Q eligible. *Units are from a showroom clearance. Units are new and unused but may have marks or cosmetic damage and may not always be in original packaging KEY FEATURES: Extracts up to 187 m3/hr @ 100 Pa Up to 90% thermal efficiency Automatic, 100% bypass Triple filter design 5 year warranty* 'A' energy rating Internet control by smartphone, tablet, or PC Passive house certified MAIN FEATURES: Supply and extract air ventilation with heat recovery Galvanised steel, powder coated double-skin casing Auto cut-out switch for extra safety BMS connection via MODBUS or KNX (optional) Boost operation with timer On demand control via room or duct sensor options Complies with the NHBC criteria and ErP 2016 standards SAP Appendix Q eligible. Meets building regulations Optional LCD digital controller with four independent environmental profiles Optional manual four speed controller Optional smart frost protection Optional built-in electric post heater Benefits of working with BPC Ventilation Number 1 leading MVHR and ventilation system specialists Large range of systems for domestic and commercial applications Authorised Airflow distributors

GBP 960.00
1

Nuaire AB-ECO-LP2 Ceiling Void Horizontal MVHR Unit

Nuaire AB-ECO-LP2 Ceiling Void Horizontal MVHR Unit

Nuaire ceiling void unit - ECO-LP2 Nuaire ceiling void unit Opposite hand - ECO-LP2-OH Description The new MRXBOXAB-ECO-LP2 is a Low-Profile ceiling mounted unit that is specificallydesigned to fit easily into apartments with ceiling void restrictions of only 200mm and has a high performance of 285m3/hr with low SFP of 0.56 wls Controllability is provided by optional room sensors or switches (no digital controller is available for this model) The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems, KEY FEATURES – Nuaire AB-ECO-LP2 Suitable for floor areas up to 170m2 Delivers an airflow rate of up to 285 m³/hour @ 100 Pa High heat recovery efficiency of up to 79%. 100% summer by-pass On demand control via optional room or duct sensor options Full 100% automatic summer bypass to supply unheated air in the summer Sap Appendix Q (BRE) approved 2 x G3 filters Galvanised steel casing with EPP internal lining 2-year warranty* (Listed parts Only) 'A' energy rating Left hand right oriented models available UK/CA marked Surge protected Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following: Manual 100% adjustment of background and boost speeds 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency

GBP 1692.20
1

Mitsubishi Lossnay-VL250 Units

Mitsubishi Lossnay-VL250 Units

Mitsubishi Lossnay-VL Units Product Part Number Mitsubishi Lossnay VL-250 (L) wall mounted residential MVHR with bypass and digital controller - LEFT - VL-250CZPVU-L-E Mitsubishi Lossnay VL-250 (R) wall mounted residential MVHR with bypass and digital controller - RIGHT - VL-250CZPVU-R-E Description The Mitsubishi VL-250 is a quality unit with the advantage of a unit mounted controller with 5 years part warranty and provides a maximum flow rate of 250m3/hr suitable for a house up to 150 m2 floor area with up to 3 kitchens & bathrooms BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace Optional ePM2.5 50% to air supply Optional NOX 90% filter to air supply CONTROL OPTIONS The Mitsubishi VL units are controlled by one of the following: Control Via Unit mounted digital controller 0-10v sensor Volt free contacts Additional external sensors achieving on-demand ventilation Switched live signal from remote switches Optional wall controller (P-RCC-E) Optional Wi-Fi integration to phone (MAC-5671F-E)   Optional Wi-Fi with additional accessory - MAC-5617F-E   Summer By-Pass The VL range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit   Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-3°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Orientation The Mitsubishi Lossnay VL units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket

GBP 1001.45
1

Nuaire - AB-WM1 MRXBOX95 Unit

Nuaire - AB-WM1 MRXBOX95 Unit

Nuaire MRXBOXAB-WM1 Opposite Handed MRXBOXAB-WM1-OH Description The Nuaire MRXBOXAB-WM1 provides a maximum flow rate of 125m3/hr suitable for a house up to 73m2 floor area with up to 2 kitchens & bathrooms(no digital controller or humidity sensor is available for this model)The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide areliable but simple to operate system for social housing, developments and end usersBPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-yearparts warranty* and lifetime technical support on our top-quality systems Filtration 2 x G4 filters are fitted to the unit that are easy and inexpensive to replace(The filters are provided with plastic covers that should be removed before starting unit for first time) CONTROL OPTIONS The Nuaire MRXBOX units are controlled by one of the following:We also advise an optional boost switch should be used local to the wet rooms 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 86% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The Nuaire units are wall mounted as standard and are supplied with a wall bracket    

GBP 971.28
1

Mitsubishi Lossnay-VL500 Units

Mitsubishi Lossnay-VL500 Units

Mitsubishi Lossnay-VL Units Product Part Number Mitsubishi Lossnay VL-500 (L) wall mounted residential MVHR with bypass and digital controller - LEFT - VL-500CZPVU-L-E Mitsubishi Lossnay VL-500 (R) wall mounted residential MVHR with bypass and digital controller - RIGHT - VL-500CZPVU-R-E Description The Mitsubishi VL-500 is a quality unit with the advantage of a unit mounted controller with 5 years part warranty and provides a maximum flow rate of 540m3/hr suitable for a house up to 320 m2 floor area with up to 6 kitchens & bathrooms BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace Optional ePM2.5 50% to air supply Optional NOX 90% filter to air supply CONTROL OPTIONS The Mitsubishi VL units are controlled by one of the following: Control Via Unit mounted digital controller 0-10v sensor Volt free contacts Additional external sensors achieving on-demand ventilation Switched live signal from remote switches Optional wall controller (P-RCC-E) Optional Wi-Fi integration to phone (MAC-5671F-E) Optional Wi-Fi with additional accessory - MAC-5617F-E Summer By-Pass The VL range of units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-3°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Orientation The Mitsubishi Lossnay VL units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Mounting The units are wall mounted as standard and are supplied with a wall bracket  

GBP 1319.45
1

Special Offer - 7kw Panasonic Aquarea MONO-BLOC Air To Water Heat Pump

Special Offer - 7kw Panasonic Aquarea MONO-BLOC Air To Water Heat Pump

Panasonic Aquarea High Performance Mono-Bloc Air to Water Heat Pump Single Phase J Generation Heating and Cooling with R32 refrigerant  Panasonic air-to-water heat pump is an eco-friendly, affordable, and safe way to heat your home when compared to traditional electrical, gas and oil heating systems that are now being phased out of production due to climate change regulations The High-Performance Mono-Bloc unit is a popular choice for normal ambient operating temperatures of up to -7° and to a max operating temperature of -20° The Monobloc configuration keeps all components of the heat pump within a single outdoor enclosure. Two pipes carry water between the outdoor unit and the interior portions of the overall system. As there are no external refrigerant pipes the units are pre-charged and would provide the simplest installation This system will also require separately a Due Pre-Plumbed water cylinder and buffer tank Market-leading Seven-year Parts and Labour warranty on Panasonic heat pumps if installed and serviced by an approved Panasonic engineer Aquarea Smart Cloud is the most advanced heating control for today and for the future. Aquarea can be connected to the Cloud with CZ-TAW1, enabling both end-user control and remote maintenance by service partners. Panasonic All in One air to water heat pumps should be installed by a qualified installer and preferably an approved Panasonic heat pump engineer To purchase this heat pump, we will require the installers details and current F-Gas number before it is dispatched If you are an installer, please sign up with us to become an approved Panasonic installer and receive free training, Rewards and be able to provide up to a 7-year part and labour warranty to your customers and possible sales leads and installation work * Market-leading Seven-year Parts and Labour warranty on Panasonic heat pumps if installed and serviced by an approved Panasonic engineer

GBP 2731.90
1

Panasonic Aquarea MONO-BLOC Air To Water Heat Pump

Panasonic Aquarea MONO-BLOC Air To Water Heat Pump

Panasonic Aquarea High Performance Mono-Bloc Air to Water Heat Pump Single Phase J Generation Heating and Cooling with R32 refrigerant  Panasonic air-to-water heat pump is an eco-friendly, affordable, and safe way to heat your home when compared to traditional electrical, gas and oil heating systems that are now being phased out of production due to climate change regulations The High-Performance Mono-Bloc unit is a popular choice for normal ambient operating temperatures of up to -7° and to a max operating temperature of -20° The Monobloc configuration keeps all components of the heat pump within a single outdoor enclosure. Two pipes carry water between the outdoor unit and the interior portions of the overall system. As there are no external refrigerant pipes the units are pre-charged and would provide the simplest installation This system will also require separately a Due Pre-Plumbed water cylinder and buffer tank Market-leading Seven-year Parts and Labour warranty on Panasonic heat pumps if installed and serviced by an approved Panasonic engineer   Aquarea Smart Cloud is the most advanced heating control for today and for the future. Aquarea can be connected to the Cloud with CZ-TAW1, enabling both end-user control and remote maintenance by service partners. Panasonic All in One air to water heat pumps should be installed by a qualified installer and preferably an approved Panasonic heat pump engineer To purchase this heat pump, we will require the installers details and current F-Gas number before it is dispatched If you are an installer, please sign up with us to become an approved Panasonic installer and receive free training, Rewards and be able to provide up to a 7-year part and labour warranty to your customers and possible sales leads and installation work * Market-leading Seven-year Parts and Labour warranty on Panasonic heat pumps if installed and serviced by an approved Panasonic engineer  

GBP 3433.06
1

Vent Axia Kinetic 200ZH Heat Recovery Unit

Vent Axia Kinetic 200ZH Heat Recovery Unit

Vent Axia Sentinel Kinetic 200ZH Horizontal Heat Recovery Unit Product Part Number Vent Axia Kinetic 200ZH - 449540 Key Features Vent Axia Horizontal Heat recovery unit Suitable for houses up to 140 m2 Up to 81% heat recovery Mechanical summer by-pass Internal humidity sensor 5 Year warranty Complete with digital controller Multiple control options Frost protection 100% programmable and adjustable supply and extract rates Night time set back Dimensions (HxLxW): 200 x 570 x 895 (mm) Filtration 2 x G3 with optional F5 Controllability The Lo-Carbon Sentinel Kinetic Horizontal models have three fully adjustable speeds and a purge setting (maximum airflow). Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range. Boost can be achieved with almost any type of sensor or switch including momentary. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction Fully insulated construction of galvanised steel. Motors The unit has 2 x low energy, high efficiency EC/DC motors

GBP 2534.40
1