408 results (0,14058 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Baldwin Boxall BDM400TSN Desk Mic for PCTSINT All Call Switch

Baldwin Boxall BDM400TSN Desk Mic for PCTSINT All Call Switch

Baldwin Boxall BDM400TSN Desk Mic for PCTSINT All Call SwitchBDM400TSN is a Desk Microphone designed for the PCTSINT All Call Switch.Unitouch touchscreen PC paging technology allows simple intuitive control of an EVAS voice alarm system. By touching the relevant part of the screen the operator can access fire microphones page anyall zones select and broadcast background music. It comes with a variety of additional products to further enhance your experience including the Desk microphone for touchscreen systems.

GBP 909.92
1

C-Tec ECU-224 SigTEL 224 Line Desk Controller

C-Tec ECU-224 SigTEL 224 Line Desk Controller

C-Tec ECU-224 SigTEL 224 Line Desk ControllerOptional 1-224 line SigTEL Desk Controller with handset display. Requires an ECU723 fitted at an ECU-4 8 or 16 Controller. ECU-224s are NOT compatible with ECU-8NT Controllers.A new 224line Desk Controllerfor use with our SigTEL disabled refuge fire telephone and stadium marshallingsystem.Allows operators to communicate with up to 224disabled refuge or fire telephone outstations.Designed to simplify call-handling on larger EVC installations.Must be connected to an ECU-4 8 or 16 master controller viaan ECU-723 interfacenetwork card.Although designed to be free-standing an optional sloping wall mounting shelf is available order code ECUWMB.See schematicfull instructions for further details.

GBP 968.15
1

Baldwin Boxall OmniPLUS Ctrl Hub Desk Phone No BVOCTSPCD

Baldwin Boxall OmniPLUS Ctrl Hub Desk Phone No BVOCTSPCD

Baldwin Boxall OmniPLUS Ctrl Hub Desk Phone No BVOCTSPCDA standard Omnicare system has the ability to connect to a maximum of 127 outstations. The development of OmnicarePLUS has enabled the installation of much larger scale systems.OmnicarePLUS is made up of multiple BS5839-9 compliant local systems which are then connected to form a network.The benefit of OmnicarePLUS is the ability to communicate with any outstation on any part of the network from a single point. This sitewide control is via a graphical touch screens.

GBP 11425.27
1

Carrier ABT-ICDG-1 SIP Paging Station - Desk Microphone

Carrier ABT-ICDG-1 SIP Paging Station - Desk Microphone

Carrier ABT-ICDG-1 SIP Paging Station - Desk MicrophoneABT-ICDG-1 is a phone paging station with visualization for business clients. It is equipped with a gooseneck microphone for easy voice messaging and high-quality hands-free connections. Programmable buttons allow to perform various actions with one click from voice call broadcasting to door opening and many more. Communication is based on the SIP protocol and can serve as a monitoring center or host for an office manager. ABT-ICDG-1 also gives the possibility of quick response in crisis situations.Key Features20 SIP lines 3-way conference hotspot HD audio on speakerphone and handsetMovable type Directional External Gooseneck Microphone 4.3 main colour display 2 x 3.5 side colour displays for DSS keysBuilt-in Bluetooth Wi-Fi connectivityVia Wi-Fi dongleUp to 106 DSS keys 42 tri-coloured physical keys Video Codec H.264 support for receiving video calls Dual Gigabit ports integrated PoE Stand with 2 adjustable angles of 40 and 50 degreesCompatible with major platforms Asterisk Broadsoft 3CX Metaswitch Elastix Avaya etc

GBP 895.36
1

Aico Relay Module with 5A Relay Mounts under 2100 160RC amp 140RC Alarms Ei128R

Aico Relay Module with 5A Relay Mounts under 2100 160RC amp 140RC Alarms Ei128R

Aico Relay Module with 5A Relay Mounts under 2100 160RC 140RC Alarms Ei128RThe Ei128R is a mains powered Relay Module that triggers external devices such as a strobe light or telecare deviceif the alarmsin the propertyactivate.Compatible with the3000Ei2110e Multi-Sensor Fire Alarm160e Seriesalarms and the 140RC SeriesThe Module has additional trunking knock outsto make as easy to install as possibleand is designed to fit underneath the space of easy-fit or RadioLINK base. However a cover is supplied if needed and containsa set of volt-free contacts as standard.The Relay module can beconfigured to give a 230V output or a 24V output using an external 24V supply.Operation of the Ei128ROn receiving a signal from the alarm system the relay contacts will be operated causing a signal to be sent to the device to which it is connected.The Ei128R can be used to switch into a range of devices ranging from indicating lights to magnetic door handles.The module can be switched to give a pulse output or continuous output for different applications.Technical SpecificationThe Relay is designed to operate whilst the alarm system is sounding to signal ancillary devices such as door closers extractors remote sounders etc. When any of the interconnected alarms sound the signal will cause the relay contacts to switch.The Relay is mains powered and operates on receipt of a signal from the interconnect line of a smoke heat or CO alarm. The relay does not operate if mains power is not present.Volt free contacts Normally Open or Normally Closed rated up to 240V AC5 Amps making it suitable for use with a wide range of AC or DC voltages.The Ei128R is designed for siting under one of the smokeheat alarms listed above. However a cover is supplied if installing remotely or with 260 series CO alarms.More than one Relay can be used in a set of interconnected alarms on the condition that no more than 12 units are used in the system 1 x Ei128R counts as one unit.Fitted with a 4 way connector block for ease of wiring.The relay can be set for Continuous or Pulse operation by operation of a manual switch when in Pulse operation mode the relay contacts will automatically switch back to their original state after 5 seconds.Features 3 x 25mm trunking knockouts for surface wiring and centre knockout for recess wiring.Dimensions of unit 135mm diameter x 20mm depth.Weight inclusive of packaging 170g.Manufactured in Ireland.Key FeaturesFor use with the 2100 160RC and 140RC series alarmsVolt free contacts as supplied for multiple useCan be configured to switch a 230V or 24V deviceTrunking knock-outs for easy and neat wiringAdditional connectors for ease of wiringContinuous or pulse operationFits discreetly behind any smoke heat alarm5 Year Guarantee

GBP 43.28
1

SAS RED2501 Infrared Transmitter Tester

SAS RED2501 Infrared Transmitter Tester

SAS RED2501 Infrared Transmitter TesterThis desk mounted test unit is used to check that the RED2081 and RED2092 transmitters are sending the correct signals and that battery levels are healthy. It is not needed to test the RED20856 and 7 transmitters as these include built-in test features.The transmitter is inserted into the test station so as not to activate any nearby infrared receivers. Ideally positioned at the reception desk so staff can test their transmitters at regular intervals. It is supplied with a plug top power supply unit.

GBP 202.50
1

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type A

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type A

Carrier ABT-NSM-A Noise Sensing Microphone for One Controller - Type AABT-NSM is measurement microphone which is designed to operate under extreme temperatures. Up to 6 microphones can be connected to ABT-NSC6 via 2-wire cable.The ABT-NSM is available in two housings. Lightweight for indoor applications.Key FeaturesOperates under extreme temperatures2 wire analogue connection up to 300 meters from ABT-NSC6Dimensions 200 x 110 mm

GBP 99.44
1

Carrier ABT-NSM-B Noise Sensing Microphone for One Controller - Type B

Carrier ABT-NSM-B Noise Sensing Microphone for One Controller - Type B

Carrier ABT-NSM-B Noise Sensing Microphone for One Controller - Type BABT-NSM is measurement microphone which is designed to operate under extreme temperatures. Up to 6 microphones can be connected to ABT-NSC6 via 2-wire cable.The ABT-NSM is available in two housings. Lightweight for indoor applications.Key FeaturesOperate under extreme temperatures 2 wire analogue connection up to 300 meters from ABT-NSC6Dimensions 200 x 146 mm

GBP 182.30
1

Notifier Honeywell ABT-NSMA Noise Sensing Microphone

Notifier Honeywell ABT-NSMA Noise Sensing Microphone

Notifier Honeywell ABT-NSMA Noise Sensing MicrophoneABT-NSM is a measurement microphone which is designed to operate under extreme temperatures. Up to 6 microphones can be connected to ABT-NSC6 via 2-wire cable. The ABT-NSM is available in two housings. Lightweight for indoor applications A and enclosures for severe climatic conditions B.DetailsOperate under extreme temperaturesIP 66 rated housing2 wire analogue connection up to 300 meters from ABT-NSC6

GBP 203.00
1

Notifier Honeywell ABT-NSMB Noise Sensing Microphone

Notifier Honeywell ABT-NSMB Noise Sensing Microphone

Notifier Honeywell ABT-NSMB Noise Sensing MicrophoneABT-NSM is a measurement microphone which is designed to operate under extreme temperatures. Up to 6 microphones can be connected to ABT-NSC6 via 2-wire cable. The ABT-NSM is available in two housings. Lightweight for indoor applications A and enclosures for severe climatic conditions B.DetailsOperate under extreme temperaturesIP 66 rated housing2 wire analogue connection up to 300 meters from ABT-NSC6

GBP 372.00
1

Baldwin Boxall 8 Zone Paging Telephone Interface BT8

Baldwin Boxall 8 Zone Paging Telephone Interface BT8

Baldwin Boxall 8 Zone Paging Telephone Interface BT8Our telephone interface units enable staff to make public address announcements from their own desk telephone. The free-standing units act as an interface between the analogue telephone system and the amplifier.Key FeaturesOperated by simply dialling the BT5BT8 extension number.Each unit is supplied with an IEC mains lead.Can be used to broadcast live announcements.Additional facility enables the user to pre-record an announcement. This reduces the risk of feedback where the telephone is adjacent to a loudspeaker.When connected to a telephone system with MF signalling the BT8 enables the user to select up to eight zones via the telephone keypad.An internal selector determines if the recorded message is played once or twice.Can be wired into any two-wire analogue extension port via a designated master extension socket. Another option is to connect the unit to the paging port available on most modern telephone switches. However they are not designed to operate on keyphone system extension ports.Outputs are selectable from line or microphone level.Signal output and zone select connections are via a 25 way D connector.Compatible with our BDM300 range of desk microphones connected via the BMS25 socket box supplied with the microphone.We recommend using our B81R relay unit for the zone select switching.Please note the BT8 is not approved for direct connection to the BT network. Under general approval NSG23J100003 it may be connected to a port on a telephone switch PABX. This unit should only be used with a switchable amplifier input.

GBP 1050.54
1

C-Tec QT42410 Ten-Way Charging Unit for QT412

C-Tec QT42410 Ten-Way Charging Unit for QT412

C-Tec QT42410 Ten-Way Charging Unit for QT412The QT42410 ten-way charging unit can simultaneously charge up to ten QT412 Range dual action infraredradio transmitters. Designed to be powered from a 230V a.c. mains source using the standard IEC lead supplied the unit can be wall or desk mounted to suit the transmitter storage and charging requirements of a particular site.Key FeaturesA ten-way plugtop charger designed for use with Quantecs QT412 range of IRRF transmitters.Can simultaneously charge up to ten transmitters.Connects to a standard 13A mains socket using the standard IEC lead suppliedCan be wall or desk mounted to suit the transmitter storagecharging requirements of a particular site.Fully recharged transmitters can be left connected to the charger with no detrimental effect.14-hour typical charging time full cycle.Indicators confirm when charging is complete.

GBP 265.99
1

RGL Electronics BK600L Adjustable L Bracket For Use With ML600 Maglocks

RGL Electronics BK600L Adjustable L Bracket For Use With ML600 Maglocks

RGL Electronics BK600L Adjustable L Bracket For Use With ML600 MaglocksThe RGL BK600L is an adjustable L Bracket for use with the ML600 range of maglocks. It is suitable for outward opening doors when there isnt enough room under the frame.Key FeaturesFully adjustable L bracket set for slim maglocksSuitable for outward opening doors when there isnt enough room under the frame2 required for double maglocksFor use on outward opening doorsCompatible with all RGL slimline maglocksAnodised aluminium finishFully adjustable

GBP 10.09
1

C-Tec ECU723 SigTEL InterfaceNetwork Communication Card

C-Tec ECU723 SigTEL InterfaceNetwork Communication Card

C-Tec ECU723 SigTEL InterfaceNetwork Communication CardECU-224 interfacenetwork card. Allows an ECU-224 desk controller to be connected to an ECU-4 8 or 16. Can also act as a network card if networking is required. NOT compatible with ECU-8NT Controllers.The ECU723 transmits speech via a single wiring loop and digital data via two linear RS485 networks. The network should be connected using 4 x 2-core 1.5 mm2 enhanced fire-rated cable. Max. length of all networks is 1 km.An optional system expansion device.Allows anECU-224 desk controller to be connected to an ECU-4 8or16 SigTEL controller to simplify call handling on larger SigTEL applications.Mounts inside an ECU-4 8 or 16 can alsobe used tonetworkthe ECU-4 8 or 16 to another controller if required.Not compatible with ECU-8NT controllers.See schematicfull instructions for further details

GBP 108.77
1

Lexicomm ViLX-ACR Touchscreen Assist Call Repeater

Lexicomm ViLX-ACR Touchscreen Assist Call Repeater

Lexicomm ViLX-ACR Touchscreen Assist Call RepeaterA compact 2.8 touchscreen mounted in a double gang MK style plate to indicate assist calls ideal for mounting in a desk or on the wall in a reception.The Lexicomm ViLX-ACR provides remote indication of Assist Call alarms and provides an acknowledgment facility. It is ideal for mounting within a reception desk or on a wall due to its compact size and pleasing aesthetics.It connects to the Lexicomm network via the nearest ViLX-EX8 System Expander panel via Cat 5 cable plugging in to a dedicated port. It can be located up to 30m away and does not require a power supply and does not take a line output.It has a brushed stainless-steel finish 2.8 high contrast full colour touch screen display. Sized at 146mm x 86mm it mounts onto 25mm deep standard double gang electrical box.Key Features2.8 TFT touch screen colour displayHigh volume sounder with volume controlConnects to Lexicomm System ExpandersAesthetically pleasing stainless finishNo local power requiredCan be Located up to 30m from the expander using Cat 5 Cable

GBP 355.84
1

C-Tec ECU722 SigTEL Network Communication Card

C-Tec ECU722 SigTEL Network Communication Card

C-Tec ECU722 SigTEL Network Communication CardNetwork card allows up to 14 ECU-4 8 16 or 8NTs to be interlinked. To network a controller that has an optional ECU-224 desk controller fitted use an ECU723 interfacenetwork card instead.The ECU722 card transmits speech via a single wiring loop and digital data via two linear RS485 networks. The network should be connected using 4 x 2-core 1.5 mm2 enhanced fire-rated cable. Max. length of all networks is 1 km.Key FeaturesAn optional system expansion device.Allows up to 14 ECU-4 8 16 or 8NT SigTEL controllers to be interlinked.One card required per networked SigTEL controller.Allows systems of up to 224 lines 14x ECU-16controllers to be easily set-up.Any ECU-4ECU-8 or ECU-16 can take control of the system at any time by the input of a special code.Note that for networked systems that do not require multiple control points controllers without handsets are available ECU-8NT.IMPORTANT To network a controller that has an optional ECU-224 desk controller fitted use an ECU723 interfacenetwork card instead of an ECU722 the ECU723 is due for release Nov 2019.

GBP 90.65
1

International Gas Detectors TOC-750S-FIL End of Line Filter Assembly for 6mm x 4mmm Tube

International Gas Detectors TOC-750S-FIL End of Line Filter Assembly for 6mm x 4mmm Tube

International Gas Detectors TOC-750S-FIL End of Line Filter Assembly for 6mm x 4mmm Tube Sampler are designed for ambient sampling only. You should only use conduitcable entries provided drilling the enclosure will avoid any warranty.It may be necessary to vent spill gases to a safe areaInstallation RequirementsInterconnecting Highway Cabling for 2-Wire Addressable systems For safe area detectors use 2 core cable 1.0 to 2.5mmSQ cable depending on distance.Ensure Cable Screens are correctly terminated and cables are stripped to the enclosed guide.There are two methods to deploy the EOL assembly. Under ideal circumstances the assembly should be fitted at the very end of the sample tube as this provides the best protection but we can appreciate under certain circumstances this option may not be possible.

GBP 136.08
1