29 results (0,14094 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Morley EVCS-HLJ Loose Handset with Jack Leads

Morley EVCS-HLJ Loose Handset with Jack Leads

Morley EVCS-HLJ Loose Handset with Jack LeadsThe Roaming Handset is used along with the Jack Plate for Emergency Voice Communication System installations in countries whose fire codes allow for Roaming Handsets. When used together the Roaming Handset and Jack Plate form a Type A Outstation which is compatible with all EVCS systems.Key FeaturesTelecoil for hearing impaired usersFlexible roaming phoneFull duplex operationFull duplex operation allowing 2-way voice communicationPlease Note These units are not suitable for installation in the UK to BS5839 Pt9

GBP 155.36
1

Lexicomm ViLX-OSR Roaming Handset with Jack Plug

Lexicomm ViLX-OSR Roaming Handset with Jack Plug

Lexicomm ViLX-OSR Roaming Handset with Jack PlugLexicomm roaming fire telephones are used in conjunction with jack points primarily for use by the fire service in a high rise building to provide clear communications between the control point and the fire fighters as radio systems may not work.The roaming fire telephones are easy to use. To initiate a call a telephone is plugged into the jack point which initiates a call to the master station. Full duplex operation provides clear 2-way conversation.The Lexicomm EVCS system allows up to 5 telephones connected to the same line to have a party Line conversation with the master station at the same time.

GBP 106.14
1

Morley EVCS-HANDSET Remote Jack Handset

Morley EVCS-HANDSET Remote Jack Handset

Morley EVCS-HANDSET Remote Jack HandsetThe EVCS-HANDSET is a Remote Jack Handset which has been designed for use on the Stand-Alone Network 16.The Honeywell Network 16 is a high specification loop driven intelligent emergency voice communication system offering sophisticated functionality along with simple end user operation.Network 16 is designed to ensure simplicity of future expansion a maximum of 16 outstations of various types can be controlled from one master panel.Loop wiring ensures the system is fault tolerant through the use of short circuit isolators and continuous fault monitoring ensures high availability. The system uses digital audio transmission to maintain audio quality and intelligibility when it matters most.The simplicity of operation ease of cabling and competitive pricing make the system suitable for a wide range of applications. In combination with our range of soft addressed digital outstations this stand-alone system reduces the labour and materials cost along with the potential for wiring errors associated with traditional spur systems.

GBP 161.03
1

C-Tec EVC401PH Roaming Fire Telephone Handset

C-Tec EVC401PH Roaming Fire Telephone Handset

C-Tec EVC401PH Roaming Fire Telephone HandsetA portable fire telephone handset designed for usein conjunction with a series of EVC301JP Jack Plates on compatible SigTEL emergency voice communication systems. Whenplugged intoan EVC301JP Jack Plate not supplied the handset will call theSigTEL master controller from where a two-way speech channel can be opened and instructions communicated.Key FeaturesIncludes a flexible 1.5m coiled lead cw a 14 jack plug.Multiple jack plates can be connected to a single SigTEL Master Controllerline in stairwells etc.Designed for use in regions where roaming handsets are accepted typically the Far and Middle East. UK standard BS5839-9 DOES NOTallow the use ofthese devices.Facilitatesreliable two-way communication in anemergency between a permanently manned control room and key points ofasite.

GBP 109.87
1

Baldwin Boxall CARE2 Roaming Telephone Handset C2RTH

Baldwin Boxall CARE2 Roaming Telephone Handset C2RTH

Baldwin Boxall CARE2 Roaming Telephone Handset C2RTHThe Care2 roaming telephone is a portable handset for use at the specially designed jack sockets. The jack sockets are positioned at appropriate points throughout a building.The roaming telephones are stored in an enclosure which as well as keeping them protected and secure provides the added advantage of monitoring the handsets whilst not in use.Key FeaturesRobust unit with hearing aid compatible earpiece T-coil

GBP 153.31
1

C-Tec NC805AS Air Switch

C-Tec NC805AS Air Switch

C-Tec NC805AS Air SwitchThe NC805AS is designed for use with C-TECsNC805P Pneumatic Pad. Applying pressure to the NC805P operates the airswitch which in turn triggers a Standard call when the 6.35mm jack plug on the NC805ASis connected to a compatible call points remote socket.Key FeaturesOperates at a minimum differential air pressure of 0.9 p.s.i pounds per square inch or 6220 Pa pascals 10 at 16CIP Rating IP20Ideal for patients who find it difficult to press buttons

GBP 106.18
1

C-Tec QT644 Floor Pressure Mat

C-Tec QT644 Floor Pressure Mat

C-Tec QT644 Floor Pressure MatThe QT644 floor pressure mat is designed to alert staff to the prospect of a wandering patient in nursing homes hospitals and other care facilities. Fully compatible with our Quantec and 800 Series call systems the mat is manufactured to a high standard with an attractive grey PVC finish and non-slip rubber base.Key FeaturesDesigned to trigger a call when it detects patient foot pressureTypically located alongside a bed to advise staff of wandering patientsCan be connected to a Quantec addressable call system or an 800 Series conventional call system via a remote jack socketTough durable grey PVC finish with a non-slip rubber baseAttractive high-quality design - ideal for use in all types of care facilityCan be wiped-clean using a non-caustic sanitising solutionMeasures 90cm x 60cm 3ft x 2ft. Approx 5mm deepSupplied with a 2m lead and a normally open right-angled jack plugHelps protect infirm residents and dementia sufferers against potential falls by quickly alerting staff if someone gets out of bedHighly sensitiveSimple and reliable operationCan also be used in low-level access control applicationsExcellent discounts for quantity orders

GBP 112.04
1

Apollo Mounting Plate for 4 Prisms 100m 29600-529

Apollo Mounting Plate for 4 Prisms 100m 29600-529

Apollo Mounting Plate for 4 Prisms 100m 29600-529Mounting Plate 4 Prisms.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 88.92
1

Apollo Beam Detector Surface Mounting Plate for Prisms 29600-528

Apollo Beam Detector Surface Mounting Plate for Prisms 29600-528

Apollo Beam Detector Surface Mounting Plate for Prisms 29600-528Surface Mounting Plate for Auto-Aligning Beam Detector.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 90.10
1

Apollo Auto-Aligning Beam Detector Extension Kit 100m 29600-526

Apollo Auto-Aligning Beam Detector Extension Kit 100m 29600-526

Apollo Auto-Aligning Beam Detector Extension Kit 100m 29600-526100m Extension Kit for the Auto-Aligning Beam Detector.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 141.96
1

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527

Apollo Universal Bracket for Beam Detector Heads and Prisms 29600-527Universal Bracket for the Auto-Aligning Beam Detector.Auto-Aligning Beam Detector DescriptionThe high-performance Auto-Aligning Beam Detector comprises of a ground level controller detector head with auto-aligning feature integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller.Brand InformationAuto-compensates for building movement and contaminationIntegral laser and auto-align enable quicker installationLow-level system controller with LCD display and user-friendly interface

GBP 164.20
1

SAS RED210 Overdoor Indicator Light

SAS RED210 Overdoor Indicator Light

SAS RED210 Overdoor Indicator LightA useful option these lights can be fitted outside each room to indicate that an alarm call has been made from inside. Staff often find these useful in the rapid location of calls. The light pulses red to signal which priority of call has been initiated. It can be used as a group light to indicate calls from up to eight alarm points.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 115.84
1

SAS NET210R Over Door Light Addressable Type Voltage Free

SAS NET210R Over Door Light Addressable Type Voltage Free

SAS NET210ROver Door Light Addressable Type Voltage FreeOver door lights are usually fitted outside a room situated as the name suggests above the door. The device works in conjunction with the call point inside the room. Whenever its assigned call point is activated the over door light flashes the corresponding pattern for that alarm condition. They are used commonly for rapid obvious detection of an alarm condition as they can be seen down a corridor. A relay with dry contacts version is available to interface with other systems. Also there is a sounder version available these are usually used in conjunction with door monitors NET218. Each over door light can be configured to respond to up to eight addressable call points.Useful as options these lights can be fitted outside each room to indicate that a call has been made. Staffs often find these useful in the rapid location of calls. The light pulses red to signal the type of call and green to show that the call is being attended to and also staff presence.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 126.36
1

SAS NET210 Over Door Light Addressable Type

SAS NET210 Over Door Light Addressable Type

SAS NET210 Over Door Light Addressable TypeUseful as options these lights can be fitted outside each room to indicate that a call has been made. Staffs often find these useful in the rapid location of calls. The light pulses red to signal the type of call and green to show that the call is being attended to and also staff presence.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 115.84
1

C-Tec QT637 Quantec Enuresis General Purpose Interface Socket

C-Tec QT637 Quantec Enuresis General Purpose Interface Socket

C-Tec QT637 Quantec Enuresis General Purpose Interface SocketAllows bed wet sensors floor pressure mats and bedchair exit sensors to be easily interfaced to a Quantec addressable call system. Includes two 6.35mm remote jack sockets - one for use with a QT635 enuresisbed wet sensor and one that will accept a floor pressure mat QT644 bed exit mat QT633 or chair exit mat QT634.Onboard batteryisolation circuit ensurescompliance with all relevant UK medical directives. Connects to Quantec via the ancillary input on a Quantec master call point or a QT630 dementia care controller. Can be programmed to generate a standard help required or emergency call on activation via a QT423 configurator at the master call point.Key FeaturesIncludes a battery test button and low batteryenuresis active indicators.Supplied on a double gang plate typically located at floor level.Requires a PP3 battery.

GBP 89.00
1

Ziton ACA-CE02-025KIT LHD Cable Accessory - Clip quotEdgequot 2-3mm 116quot w Sleeve 25 Pack

Ziton ACA-CE02-025KIT LHD Cable Accessory - Clip quotEdgequot 2-3mm 116quot w Sleeve 25 Pack

Ziton ACA-CE02-025KIT LHD Cable Accessory - Clip Edge 2-3mm 116 w Sleeve 25 PackThe ACA-CE series Edge clip is designed to secure linear heat sensor cable to metal structures such as girders steel sections angle bars floating roof storage tank rim seals foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.InstallationA fixing hole in the clip allows the securing of the sensor cable. The sensor cable should be secured to the clip with a silicone sleeve ACA-RS and tie wrap ACA-TW of suitable rating.The fixing hole can also allow the fixing of a distance piece I-Bracket to extend the position of the sensor cable.Recommended spacing 1m

GBP 93.88
1

Ziton ACA-CE02-025 quotEdgequot Clip Spring Steel 2-3mm 116quot - Pack of 25

Ziton ACA-CE02-025 quotEdgequot Clip Spring Steel 2-3mm 116quot - Pack of 25

Ziton ACA-CE02-025 Edge Clip Spring Steel 2-3mm 116The ACA-CE series Edge clip is designed to secure linear heat sensor cable to metal structures such as girders steel sections angle bars floating roof storage tank rim seals foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.InstallationA fixing hole in the clip allows the securing of the sensor cable. The sensor cable should be secured to the clip with a silicone sleeve ACA-RS and tie wrap ACA-TW of suitable rating.The fixing hole can also allow the fixing of a distance piece I-Bracket to extend the position of the sensor cable.Recommended spacing 1mKey FeaturesEasy installation of linear heat cableFor use on metal structures like girders steel sections angle bars floating roof storage tank rim seals foam dams etc.Excellent resistance to corrosion and heatAvailable in spring steelPack of 25

GBP 96.14
1

Howler Call Post Mounting Board For SA01 CPOST01

Howler Call Post Mounting Board For SA01 CPOST01

Howler Call Post Mounting Board For SA01 CPOST01The call post is designed to provide a professional mounting board for any model of Howler alarm making installation quicker and more flexible. The board comes with all necessary fixing holes and fixing bolts. There is also space for an optional connector enclosure for hard wired linked Howlers.The Call Post also incorporates the statutory Fire Action notice and call point symbol alongside space to number the post if required. Tough and simple the Call Post bears the Howler stamp in every respect. These mounting boards can be used over and over again by installers wanting a speedy installation and relocation experience... with a touch of class.Key FeaturesMultiple Installs The Call post is designed for construction site use not just one site but site after site.Tough - Tough steel backboard 400 x 450mm. Upholds Howler build values reliable simple and tough.Easy To Install - Pre-drilled holes at each corner for rapid fitting on site.Flexible - Pre-drilled fixing points for any Howler or Site Alert alarm fixings included.Easy Identification - Space to fill in a call point number for ease of identification.Conforms - Statutory signage included Call Point sign and Fire Action notice.

GBP 91.39
1

Gent S4-901 CO Dual Optical Heat Sensor

Gent S4-901 CO Dual Optical Heat Sensor

Gent S4-901 CO Dual Optical Heat SensorA new concept in fire detection a truly intelligent analogue sensor combining exceptional computing power in the sensor as well as the panel to achieve an extremely fast response to a real fire whilst minimising the risk of false alarms.Key FeaturesThe multi-sensor combines heat H carbon monoxide CO optical forward scatter OFS and optical backward scatter OBSThe patented dual angle optical scatter technology allows identification of the particle source filtering potential false alarms due to steam and dustThe gas sensing element CO within the chamber monitors the concentration of carbon monoxide a product of incomplete combustion in some fire types and potentially life threatening. The CO sensor allows rapid fire detection with smouldering fires in areas where smoke detectors could register false alarmsCombined CO gas sensing with dual angle optical and heat allows a higher level of false alarm immunity whilst still improving the detection speed of certain types of fireEach sensor element has sensitivity settings which can be adjusted to suit the environment application and can be programmed for different time periods during the day or nightRepeat fire LED output as standard if monitored input not usedOperational LED blink OnOff optionMonitored Input - which can be Fire Fault or Supervisory

GBP 116.35
1