5.225 results (0,16676 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Watco Cold Set Coating Tile Red 2.5L

Watco Cold Set Coating Tile Red 2.5L

Images for illustration purposes onlyWatco Cold Set Coating uses the latest polyaspartic resin technology to provide a high quality, highly wear resistant coating that can be applied at low temperatures. It is ideal for refurbishment and maintenance in unheated areas during the winter months when conventional coatings will fail to dry.Recommended areas of useRefurbishment and maintenance in unheated areasAs a coating in walk-in fridges, cold stores and loading baysFeaturesWithstands heavy wear and tearExcellent chemical resistanceCan be applied between -10C and +30CFast curingExceptional UV resistance makes it ideal for exterior application as it resists chalking, weather and fading

GBP 199.99
1

Watco Cold Set Coating Safety Yellow, 2.5L

Watco Cold Set Coating Safety Yellow, 2.5L

Images for illustration purposes onlyWatco Cold Set Coating uses the latest polyaspartic resin technology to provide a high quality, highly wear resistant coating that can be applied at low temperatures. It is ideal for refurbishment and maintenance in unheated areas during the winter months when conventional coatings will fail to dry.Recommended areas of useRefurbishment and maintenance in unheated areasAs a coating in walk-in fridges, cold stores and loading baysFeaturesWithstands heavy wear and tearExcellent chemical resistanceCan be applied between -10C and +30CFast curingExceptional UV resistance makes it ideal for exterior application as it resists chalking, weather and fading

GBP 199.99
1

Watco Cold Set Coating Light Grey 2.5L

Watco Cold Set Coating Light Grey 2.5L

Images for illustration purposes onlyWatco Cold Set Coating uses the latest polyaspartic resin technology to provide a high quality, highly wear resistant coating that can be applied at low temperatures. It is ideal for refurbishment and maintenance in unheated areas during the winter months when conventional coatings will fail to dry.Recommended areas of useRefurbishment and maintenance in unheated areasAs a coating in walk-in fridges, cold stores and loading baysFeaturesWithstands heavy wear and tearExcellent chemical resistanceCan be applied between -10C and +30CFast curingExceptional UV resistance makes it ideal for exterior application as it resists chalking, weather and fading

GBP 199.99
1

Watco Cold Set Coating Mid Blue, 2.5L

Watco Cold Set Coating Mid Blue, 2.5L

Images for illustration purposes onlyWatco Cold Set Coating uses the latest polyaspartic resin technology to provide a high quality, highly wear resistant coating that can be applied at low temperatures. It is ideal for refurbishment and maintenance in unheated areas during the winter months when conventional coatings will fail to dry.Recommended areas of useRefurbishment and maintenance in unheated areasAs a coating in walk-in fridges, cold stores and loading baysFeaturesWithstands heavy wear and tearExcellent chemical resistanceCan be applied between -10C and +30CFast curingExceptional UV resistance makes it ideal for exterior application as it resists chalking, weather and fading

GBP 199.99
1

Watco Cold Set Coating Mid Grey, 2.5L

Watco Cold Set Coating Mid Grey, 2.5L

Images for illustration purposes onlyWatco Cold Set Coating uses the latest polyaspartic resin technology to provide a high quality, highly wear resistant coating that can be applied at low temperatures. It is ideal for refurbishment and maintenance in unheated areas during the winter months when conventional coatings will fail to dry.Recommended areas of useRefurbishment and maintenance in unheated areasAs a coating in walk-in fridges, cold stores and loading baysFeaturesWithstands heavy wear and tearExcellent chemical resistanceCan be applied between -10C and +30CFast curingExceptional UV resistance makes it ideal for exterior application as it resists chalking, weather and fading

GBP 199.99
1

Watco Food Safe Coating Mid Blue, 2.5L

Watco Food Safe Coating Mid Blue, 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99
1

Watco Food Safe Coating Light Grey 2.5L

Watco Food Safe Coating Light Grey 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99
1

Watco Food Safe Coating Safety Yellow, 2.5L

Watco Food Safe Coating Safety Yellow, 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99
1

Watco Food Safe Coating Tile Red 2.5L

Watco Food Safe Coating Tile Red 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99
1

Watco Food Safe Coating Mid Grey 2.5L

Watco Food Safe Coating Mid Grey 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 209.99
1

Watco Safety Coat Food Safe Tile Red 2.5L

Watco Safety Coat Food Safe Tile Red 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99
1

Watco Safety Coat Food Safe Mid Blue, 2.5L

Watco Safety Coat Food Safe Mid Blue, 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99
1

Watco Safety Coat Food Safe Yellow 2.5L

Watco Safety Coat Food Safe Yellow 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99
1

Watco Safety Coat Food Safe Mid Grey, 2.5L

Watco Safety Coat Food Safe Mid Grey, 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99
1

Watco Safety Coat Food Safe Light Grey 2.5L

Watco Safety Coat Food Safe Light Grey 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99
1

Watco Flowtop Spiked Shoes - XSPSHNC

Watco Flowtop Spiked Shoes - XSPSHNC

Images for illustration purposes only Flowtop Spiked Shoes Our one size fits all spiked shoes are ideal for the application of Watco coatings and specifically Flowtop and Resiflow. Avoid trapping yourself in the corner or make spike rollering easy by wearing these shoes, which allow you to walk on the coating without marking the finish. Black plastic sole, with nylon straps and metal spikes. The surface should not be walked on once the coating begins to dry, otherwise the product will start to cure and the spike marks will not disappear. Care should also be taken not to tread wet primer or the mixed components onto surrounding surfaces.

GBP 59.99
1

Watco Toughline White, 1L - TLINEWHI1

Watco Toughline White, 1L - TLINEWHI1

Images for illustration purposes onlyWatco Toughline incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as -10C.Recommended areas of usePerfect line marker for unheated warehouses, walk in fridges, cold stores and loading baysParticularly useful for exterior applications as it resists chalking, fading, weathering and UV discolourationFeaturesFlexibleUV resistantTakes heavy wear and tearExcellent chemical resistanceCuring times are dependent on site conditions, but the following can be used as a guide:Curing Times 20C 5C 0C -10CRecoatable 4-5 hrs 10-12 hrs 16 hrs 30 hrsLight Traffic 6-8 hrs 18 hrs 24 hrs 36 hrsHeavy Traffic 12 hrs 24 hrs 36 hrs 48 hrs

GBP 94.99
1

Watco Toughline Yellow, 1L - TLINEYEL1

Watco Toughline Yellow, 1L - TLINEYEL1

Images for illustration purposes onlyWatco Toughline incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as -10C.Recommended areas of usePerfect line marker for unheated warehouses, walk in fridges, cold stores and loading baysParticularly useful for exterior applications as it resists chalking, fading, weathering and UV discolourationFeaturesFlexibleUV resistantTakes heavy wear and tearExcellent chemical resistanceCuring times are dependent on site conditions, but the following can be used as a guide:Curing Times 20C 5C 0C -10CRecoatable 4-5 hrs 10-12 hrs 16 hrs 30 hrsLight Traffic 6-8 hrs 18 hrs 24 hrs 36 hrsHeavy Traffic 12 hrs 24 hrs 36 hrs 48 hrs

GBP 94.99
1

Watco Protecta-Coat Clear 2.5L

Watco Protecta-Coat Clear 2.5L

Images for illustration purposes only Watco Protecta-Coat is an exceptionally hard wearing two-pack resin coating, which will protect your floors for the long term. It cures to a smart mid-gloss finish to enhance the look of your premises. All you need to do is ensure the area to be coated is clean, dry and free from grease. Recommended areas of use Warehouses Showrooms Walk-in fridges Exterior car parking areas Features Protects coloured and decorative coatings from heavy wear and tear Can be applied at temperatures ranging from -10C to +30C Excellent chemical resistance, thus enhancing workplace safety Suitable for internal and external use Externally it will resist chalking, fading, weathering and has exceptional resistance to UV

GBP 179.99
1

Watco Protecta-Coat Anti Slip Clear 2.5L

Watco Protecta-Coat Anti Slip Clear 2.5L

Images for illustration purposes only Watco Protecta-Coat Anti Slip is an exceptionally hard wearing two-pack resin coating, which will protect your floors for the long term. It cures to a smart mid-gloss finish to enhance the look of your premises. All you need to do is ensure the area to be coated is clean, dry and free from grease. Recommended areas of use Warehouses Showrooms Walk-in fridges Exterior car parking areas Features Protects coloured and decorative coatings from heavy wear and tear Can be applied at temperatures ranging from -10C to +30C Excellent chemical resistance, thus enhancing workplace safety Suitable for internal and external use Watco Protecta-Coat Anti Slip has a finely textured slip resistant finish Externally it will resist chalking, fading, weathering and has exceptional resistance to UV

GBP 189.99
1

Watco Polyaspartic Primer 2.5L

Watco Polyaspartic Primer 2.5L

Images for illustration purposes only Watco Polyaspartic Primer is a unique, two part resin that has been specially designed prior to using Watcos range of polyaspartic coatings. When applied by roller, Polyaspartic Primer primes and seals very porous or high suction surfaces, such as sand and cement screed, to ensure a uniform finish and help prevent air entrapment bubbles in the subsequent coating. Polyaspartic Primer cures quickly and can be overcoated in 4 hours. This product can also be beneficial when overcoating an existing, well-bonded paint before using a Watco Polyaspartic coating as a top coat. Use with the following Watco products: Cold Set Coating, Fastcoat, Food Safe Coating, Protecta-Coat, Safety Coat Cold Cure and Safety Coat Food Safe. Recommended areas of use Production areas Warehouses Showrooms Workshops Loading bays Cold stores, walk-in fridges and freezers Interior and exterior Features Primes and seals porous, dusty floors prior to painting Can be used at minus 10C to 25C Ready to overcoat in 4 hours Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing time (Floor temperature) Recoat time Touch dry -10C 24 hours 16 hours 0C 12 hours 8 hours 10C 6 hours 4 hours 20C 4 hours 2 hours

GBP 159.99
1

Watco Epoxy Damp Proof Membrane 8kg

Watco Epoxy Damp Proof Membrane 8kg

Images for illustration purposes only Epoxy Damp Proof Membrane can be used on new or old concrete and sand and cement floors to hold back damp. Recommended areas of use Concrete floors subject to rising damp New or old concrete floors where a DPM has failed or was never installed Suitable for heavy wear areas Use on areas of damp concrete which cannot be surface dried prior to painting Features 100% solids, high build coating Virtually solvent free liquid epoxy resin damp-proofer Withstands 98% RH Holds back rising damp where a damp proof membrane is either missing or defective Can be over painted after 16 hours with most types of floor coatings If a DPM has failed or perhaps was never installed in the first place, the features of this product will effectively suppress vapour and hold back damp. Curing Times* 10C 7-10 hours 15C 4-6 hours 20C 3-4 hours *Curing times quoted are for touch dry or 'walk on' Overcoating Time - Allow 16 hours at 15C before applying any Watco 100% solids coating such as Epoxicote High Build, Chemi-Coat, Safety Grip, Bund Sealer, etc. Allow 24-48 hours before applying water based products such as Watco Epoxy Gloss Coat or Safety Coat. If more than 4-5 days have elapsed before overcoating, Epoxy Damp Proof Membrane should be lightly abraded to provide a key.

GBP 229.99
1

Watco Bitu-Mend Advanced 25KG Black

Watco Bitu-Mend Advanced 25KG Black

Images for illustration purposes onlyWatco Bitu-Mend Advanced is a type of pothole repair product for filling holes in asphalt and similar type floors. The epoxy resin formulation is much stronger and longer lasting than traditional bitumen based products. Its strength allows for thinner repairs than most conventional products and it is ideal for heavily trafficked areas.Recommended areas of usePotholes in asphalt and tarmacWork areasCar parks and loading bays whereforklifts and lorries operateSplits and cracks in asphaltRoller shutter door guide railsFeaturesCures to a hard, black, slip resistantfinishCan be applied at any thickness from10mm - 100mmCan also be used on concreteReady for use in 12 hoursBed in and fix roller shutter door guide rails etc.Resurface worn, eroded asphalt in gangways and work areasRepair trip hazards and potholes in asphalt and tarmac

GBP 174.99
1

6x Watco Bitu-Mend Advanced 25KG Black BITUHD25

6x Watco Bitu-Mend Advanced 25KG Black BITUHD25

Images for illustration purposes onlyWatco Bitu-Mend Advanced is a type of pothole repair product for filling holes in asphalt and similar type floors. The epoxy resin formulation is much stronger and longer lasting than traditional bitumen based products. Its strength allows for thinner repairs than most conventional products and it is ideal for heavily trafficked areas.Recommended areas of usePotholes in asphalt and tarmacWork areasCar parks and loading bays whereforklifts and lorries operateSplits and cracks in asphaltRoller shutter door guide railsFeaturesCures to a hard, black, slip resistantfinishCan be applied at any thickness from10mm - 100mmCan also be used on concreteReady for use in 12 hoursBed in and fix roller shutter door guide rails etc.Resurface worn, eroded asphalt in gangways and work areasRepair trip hazards and potholes in asphalt and tarmac

GBP 923.94
1

Watco Roof Walkway Matting 10M X 60cm X 14mm, Yellow

Watco Roof Walkway Matting 10M X 60cm X 14mm, Yellow

Images for illustration purposes only Watco Roof Walkway Matting is specifically designed as a safe walkway for flat roofs in all weather conditions. Compatible with vinyl roofing membranes, easy to lay and completely maintenance free. Its anti slip tread and open grid self draining system provides permanent slip resistance even in areas where water may pool. Recommended areas of use All weather matting for safer maintenance access on flat roofs Features Permanent slip resistance UV resistant Protects roofing membranes Self draining open grid design Weight holds matting in place - no fixings required Stable in hurricane force winds (tested in wind conditions up to 94mph)

GBP 799.99
1