66 results (0,14702 seconds)

Show all filters

Brand

Colour

Show all

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Chemi-Coat Rapid Black, 4L

Watco Chemi-Coat Rapid Black, 4L

Images for illustration purposes only Watco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. Features Easy to mix two part epoxy resin formula Cures rapidly to form a high build (250300 micron thick) glossy coating Hard wearing surface ideal for heavy use areas Only one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatings Will accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 309.99
1

Watco Chemi-Coat Acid Strength Light Grey, 4L

Watco Chemi-Coat Acid Strength Light Grey, 4L

Images for illustration purposes onlyWatco Chemi-Coat Acid Strength is a virtually solvent free, one coat epoxy resin industrial paint. FeaturesA single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy PrimerResists up to 98% strength Sulphuric AcidThick coating is ideal for chemical bund areasSmooth, glossy, wipe clean surfaceHeavy duty high build formulaApproved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature)

GBP 309.99
1

Watco Chemi-Coat Acid Strength Mid Grey, 4L

Watco Chemi-Coat Acid Strength Mid Grey, 4L

Images for illustration purposes onlyWatco Chemi-Coat Acid Strength is a virtually solvent free, one coat epoxy resin industrial paint. FeaturesA single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy PrimerResists up to 98% strength Sulphuric AcidThick coating is ideal for chemical bund areasSmooth, glossy, wipe clean surfaceHeavy duty high build formulaApproved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature)

GBP 309.99
1

Watco Chemi-Coat Rapid Mid Green, 4L

Watco Chemi-Coat Rapid Mid Green, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

Watco Chemi-Coat Rapid Tile Red, 4L

Watco Chemi-Coat Rapid Tile Red, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

Watco Chemi-Coat Rapid Mid Grey, 4L

Watco Chemi-Coat Rapid Mid Grey, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

Watco Chemi-Coat Mid Green, 4L

Watco Chemi-Coat Mid Green, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Chemi-Coat Rapid Light Grey, 4L

Watco Chemi-Coat Rapid Light Grey, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

Watco Chemi-Coat Mid Grey, 4L

Watco Chemi-Coat Mid Grey, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Chemi-Coat Rapid Dark Grey, 4L

Watco Chemi-Coat Rapid Dark Grey, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

Watco CCBLK4 Chemi-Coat Black, 4L

Watco CCBLK4 Chemi-Coat Black, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Chemi-Coat Rapid Mid Blue, 4L

Watco Chemi-Coat Rapid Mid Blue, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

Watco Chemi-Coat Light Grey, 4L

Watco Chemi-Coat Light Grey, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Chemi-Coat Mid Blue, 4L

Watco Chemi-Coat Mid Blue, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Chemi-Coat Safety Yellow, 4L

Watco Chemi-Coat Safety Yellow, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Chemi-Coat Tile Red, 4L

Watco Chemi-Coat Tile Red, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Chemi-Coat Dark Grey, 4L

Watco Chemi-Coat Dark Grey, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Chemi-Coat Rapid Safety Yellow, 4L

Watco Chemi-Coat Rapid Safety Yellow, 4L

Images for illustration purposes onlyWatco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. FeaturesEasy to mix two part epoxy resin formulaCures rapidly to form a high build (250300 micron thick) glossy coatingHard wearing surface ideal for heavy use areasOnly one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatingsWill accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

6x Watco Epoxicote High Build Anti Slip Rapid Tile Red, 4L

6x Watco Epoxicote High Build Anti Slip Rapid Tile Red, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 1559.94
1

Watco Epoxicote High Build Anti Slip Rapid Black, 4L Ehbrasblk

Watco Epoxicote High Build Anti Slip Rapid Black, 4L Ehbrasblk

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 309.99
1

6x Watco Epoxicote High Build Anti Slip Rapid Safety Yellow, 4L

6x Watco Epoxicote High Build Anti Slip Rapid Safety Yellow, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 1559.94
1

6x Watco Epoxicote High Build Anti Slip Rapid Mid Grey, 4L

6x Watco Epoxicote High Build Anti Slip Rapid Mid Grey, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 1559.94
1

6x Watco Epoxicote High Build Anti Slip Rapid Mid Green, 4L

6x Watco Epoxicote High Build Anti Slip Rapid Mid Green, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 1679.94
1

Watco Epoxicote High Build Anti Slip Rapid Tile Red, 4L EHBRASTRD4

Watco Epoxicote High Build Anti Slip Rapid Tile Red, 4L EHBRASTRD4

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 299.99
1

Watco Epoxicote High Build Anti Slip Rapid Mid Blue, 4L EHBRASMBLU4

Watco Epoxicote High Build Anti Slip Rapid Mid Blue, 4L EHBRASMBLU4

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 309.99
1