1.527 results (0,14338 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Safety Tape Light Grey, 18m X 300mm

Watco Safety Tape Light Grey, 18m X 300mm

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 309.99
1

6x Watco Safety Tape Light Grey, 18m X 50mm XSTP1850LGRY

6x Watco Safety Tape Light Grey, 18m X 50mm XSTP1850LGRY

Images for illustration purposes only Watco Safety Tapes are supplied in an extensive range of widths, colours, grades and styles. Along with the standard safety tapes various other versions are available. Recommended areas of use This anti slip tape is an easy and highly effective way to improve safety Use on concrete, brick, timber, stone, metal and painted surfaces. Features Tough aluminium oxide grit for great slip resistance and long life Ideal for indicating hazardous areas or safe escape routes Long lasting and consistent colour - Custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m When used externally we suggest that this product is used with Safety Tape Primer Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations

GBP 341.94
1

Watco Fastcoat Light Grey, 2.5L

Watco Fastcoat Light Grey, 2.5L

Images for illustration purposes only Watco Fastcoat is a new type of resin formulation that allows you to have your floor cleaned, prepared and painted within a single day. Uniquely developed by Watcos paint chemists, Fastcoat is a revolution in floor coatings that has only been made possible by recent developments in polyaspartic resin technology. Our unique formulation uses this incredibly versatile resin to produce a high grade, high performance paint for heavily used areas both inside and outside. Recommended areas of use Production Areas Warehouses Features Revolutionary, high performance, two part, polyaspartic resin formulation Exceptionally fast curing - apply 2 coats in one day to reduce downtime Extremely strong easily copes with very heavy traffic Superior abrasion and scratch resistance Can be applied at low temperatures as low as -10C and as high as 25C Excellent resistance to UV and weathering Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance -10C 24 hours 16 hours 30 hours 72 hours 14 days 0C 12 hours 8 hours 16 hours 30 hours 14 days 10C 6 hours 4 hour 8 hours 16 hours 7 days 20C 4 hours 2 hour 6 hours 16 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 199.99
1

Watco Safety Grip Light Grey 5m2

Watco Safety Grip Light Grey 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 199.99
1

Watco Firm-Step Duckboard 996mm X 996mm X 25mm, Green, Includes 9 Feet

Watco Firm-Step Duckboard 996mm X 996mm X 25mm, Green, Includes 9 Feet

Images for illustration purposes only Help keep operatives safe with this indestructibly tough, anti slip, chemical resistant work platform. The 25mm open grid allows oil and water to drain freely and the adjustable feet prevent rocking on uneven surfaces. Use on wet production lines, by sinks, in wash bays or around wet oily machinery. Recommended areas of use Ideal for use around wet, oily machinery, wash down areas Features Corrosion resistant Adjustable feet for uneven surfaces Keeps feet and products dry in constantly wet areas Made of fire retardant resin certified to BS476 Part 7 (Class 1) Wet PTV 65 - low slip potential Lightweight, easy to move for cleaning Sizes available: 996mm x 996mm x 25mm (includes 9 feet) 996mm x 1985mm x 25mm (includes 15 feet) Pendulum Slip Test Values Dry PTV Wet PTV 70 Extremely low slip potential 65 Low slip potential

GBP 279.99
1

Watco Firm-Step Duckboard 996mm X 996mm X 25mm, Yellow, Includes 9 Feet

Watco Firm-Step Duckboard 996mm X 996mm X 25mm, Yellow, Includes 9 Feet

Images for illustration purposes only Help keep operatives safe with this indestructibly tough, anti slip, chemical resistant work platform. The 25mm open grid allows oil and water to drain freely and the adjustable feet prevent rocking on uneven surfaces. Use on wet production lines, by sinks, in wash bays or around wet oily machinery. Recommended areas of use Ideal for use around wet, oily machinery, wash down areas Features Corrosion resistant Adjustable feet for uneven surfaces Keeps feet and products dry in constantly wet areas Made of fire retardant resin certified to BS476 Part 7 (Class 1) Wet PTV 65 - low slip potential Lightweight, easy to move for cleaning Sizes available: 996mm x 996mm x 25mm (includes 9 feet) 996mm x 1985mm x 25mm (includes 15 feet) Pendulum Slip Test Values Dry PTV Wet PTV 70 Extremely low slip potential 65 Low slip potential

GBP 279.99
1

Watco Firm-Step Duckboard 996mm X 996mm X 25mm, Grey, Includes 9 Feet

Watco Firm-Step Duckboard 996mm X 996mm X 25mm, Grey, Includes 9 Feet

Images for illustration purposes only Help keep operatives safe with this indestructibly tough, anti slip, chemical resistant work platform. The 25mm open grid allows oil and water to drain freely and the adjustable feet prevent rocking on uneven surfaces. Use on wet production lines, by sinks, in wash bays or around wet oily machinery. Recommended areas of use Ideal for use around wet, oily machinery, wash down areas Features Corrosion resistant Adjustable feet for uneven surfaces Keeps feet and products dry in constantly wet areas Made of fire retardant resin certified to BS476 Part 7 (Class 1) Wet PTV 65 - low slip potential Lightweight, easy to move for cleaning Sizes available: 996mm x 996mm x 25mm (includes 9 feet) 996mm x 1985mm x 25mm (includes 15 feet) Pendulum Slip Test Values Dry PTV Wet PTV 70 Extremely low slip potential 65 Low slip potential

GBP 279.99
1

Watco Safety Grip Flex, 5m SQ Light Grey

Watco Safety Grip Flex, 5m SQ Light Grey

Images for illustration purposes only Watco Safety Grip Flex, a tough, flexible polyaspartic coating, designed to provide a safe surface both inside and out. Just one coat minimises the risks of accidents throughout the workplace, particularly for wet or oily areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery. Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles Recommended areas of use Slippery, hazardous, wet or oily areas Around vibrating machinery Steps, Ramps/Disabled Ramps, Foot Bridges Loading Bays, Walkways and Entrance Ways Car Parks

GBP 219.99
1

Watco Epoxicote High Build Rapid Light Grey, 4L

Watco Epoxicote High Build Rapid Light Grey, 4L

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

Watco Epoxicote High Build Anti Slip Light Grey, 4L

Watco Epoxicote High Build Anti Slip Light Grey, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full Use Epoxicote High Build & Anti Slip 10C 20C 30C 16 hours 10 hours 6 hours 12 hours 6 hours 4 hours 24 hours 16 hours 8 hours 48 hours 48 hours 16 hours Epoxicote Cold Cure 5C 10C 20C 30C 24 hours 16 hours 12 hours 6 hours 16 hours 12 hours 6 hours 4 hours 30 hours 24 hours 16 hours 8 hours 72 hours 48 hours 48 hours 16 hours Epoxicote Rapid, Advanced, Advanced Anti Slip 10C 20C 30C 12 hours 6 hours 4 hours 8 hours 4 hours 3 hours 16hours 8 hours 6 hours 48 hours 16hours 16 hours Full Chemical Resistance: 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

Watco Epoxy Matt Coat Light Ivory

Watco Epoxy Matt Coat Light Ivory

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Epoxy Matt Coat Light Pink

Watco Epoxy Matt Coat Light Pink

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Epoxy Matt Coat Light Green

Watco Epoxy Matt Coat Light Green

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Epoxy Gloss Coat Light Grey

Watco Epoxy Gloss Coat Light Grey

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Epoxy Gloss Coat Light Blue

Watco Epoxy Gloss Coat Light Blue

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Epoxy Matt Coat Light Blue

Watco Epoxy Matt Coat Light Blue

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Epoxy Gloss Coat Light Pink

Watco Epoxy Gloss Coat Light Pink

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Epoxy Matt Coat Light Grey

Watco Epoxy Matt Coat Light Grey

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Epoxy Gloss Coat Light Ivory

Watco Epoxy Gloss Coat Light Ivory

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Epoxy Gloss Coat Light Green

Watco Epoxy Gloss Coat Light Green

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1