26 results (0,15467 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Watco Safety Coat Coarse Signal Black

Watco Safety Coat Coarse Signal Black

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

6x Watco Safety Coat Coarse Signal Black SCOATCRSBEFRAL9004

6x Watco Safety Coat Coarse Signal Black SCOATCRSBEFRAL9004

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1799.94
1

Watco Epoxicote High Build Anti Slip Black, 4L

Watco Epoxicote High Build Anti Slip Black, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full Use Epoxicote High Build & Anti Slip 10C 20C 30C 16 hours 10 hours 6 hours 12 hours 6 hours 4 hours 24 hours 16 hours 8 hours 48 hours 48 hours 16 hours Epoxicote Cold Cure 5C 10C 20C 30C 24 hours 16 hours 12 hours 6 hours 16 hours 12 hours 6 hours 4 hours 30 hours 24 hours 16 hours 8 hours 72 hours 48 hours 48 hours 16 hours Epoxicote Rapid, Advanced, Advanced Anti Slip 10C 20C 30C 12 hours 6 hours 4 hours 8 hours 4 hours 3 hours 16hours 8 hours 6 hours 48 hours 16hours 16 hours Full Chemical Resistance: 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

6x Watco Epoxicote High Build Anti Slip Black, 4L EHBASBLK4

6x Watco Epoxicote High Build Anti Slip Black, 4L EHBASBLK4

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full Use Epoxicote High Build & Anti Slip 10C 20C 30C 16 hours 10 hours 6 hours 12 hours 6 hours 4 hours 24 hours 16 hours 8 hours 48 hours 48 hours 16 hours Epoxicote Cold Cure 5C 10C 20C 30C 24 hours 16 hours 12 hours 6 hours 16 hours 12 hours 6 hours 4 hours 30 hours 24 hours 16 hours 8 hours 72 hours 48 hours 48 hours 16 hours Epoxicote Rapid, Advanced, Advanced Anti Slip 10C 20C 30C 12 hours 6 hours 4 hours 8 hours 4 hours 3 hours 16hours 8 hours 6 hours 48 hours 16hours 16 hours Full Chemical Resistance: 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1559.94
1

Watco Safety Coat Hygienic Signal Black

Watco Safety Coat Hygienic Signal Black

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

Watco Safety Coat Hygienic Traffic Black

Watco Safety Coat Hygienic Traffic Black

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

6x Watco Safety Coat Hygienic Signal Black SCOATHYGBEFRAL9004

6x Watco Safety Coat Hygienic Signal Black SCOATHYGBEFRAL9004

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1679.94
1

Watco Chemi-Coat Anti Slip Black, 4L

Watco Chemi-Coat Anti Slip Black, 4L

Images for illustration purposes onlyWatco Chemi-Coat Anti Slip is a one coat high build epoxy resin coating which offers excellent slip resistance and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer.Recommended areas of useAreas where chemical spillage or heavy wear occur.FeaturesHard aluminium oxide grit for maximum wear resistanceTough epoxy resin base resistant to many chemicalsLow solvent contentSuperb glossy appearanceEasy to apply - aluminium oxide grit is pre-blended into the curing agent, so this is a simple two componant application

GBP 289.99
1

Watco CCBLK4 Chemi-Coat Black, 4L

Watco CCBLK4 Chemi-Coat Black, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

6x Watco Safety Grip Black 5m2 Sgblk

6x Watco Safety Grip Black 5m2 Sgblk

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 959.94
1

Watco SGBLK Safety Grip Black 5m2

Watco SGBLK Safety Grip Black 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

Watco Firm-Step Riser Plates Black, 600mm X 145mm

Watco Firm-Step Riser Plates Black, 600mm X 145mm

Images for illustration purposes onlyWatco Firm-Step Covers and Landing Covers allow you to cover stair risers with an extremely durable slip resistant surface. Our Firm-Step Riser Plates finish the job to give vertical surfaces the same long lasting appearance. Watco Firm-Step Riser Plates have a smooth finish to avoid scuffing. They do not normally need to be cut to height as the top edge is hidden behind the step nosing. Risers are bonded into place using Watco Adhesive Mastic and secured by the step nosing. One 310ml cartridge will fix 4-5 linear metres of Firm-Step Riser Plates. FeaturesWill not rot, twist or warpMaintenance free: no maintenance requiredQuick and easy installationAvailable in a choice of widthsCan be used to close open risers

GBP 15.39
1

Watco Firm-Step Riser Plates Black, 1500mm X 145mm

Watco Firm-Step Riser Plates Black, 1500mm X 145mm

Images for illustration purposes onlyWatco Firm-Step Covers and Landing Covers allow you to cover stair risers with an extremely durable slip resistant surface. Our Firm-Step Riser Plates finish the job to give vertical surfaces the same long lasting appearance. Watco Firm-Step Riser Plates have a smooth finish to avoid scuffing. They do not normally need to be cut to height as the top edge is hidden behind the step nosing. Risers are bonded into place using Watco Adhesive Mastic and secured by the step nosing. One 310ml cartridge will fix 4-5 linear metres of Firm-Step Riser Plates. FeaturesWill not rot, twist or warpMaintenance free: no maintenance requiredQuick and easy installationAvailable in a choice of widthsCan be used to close open risers

GBP 37.99
1

Watco Firm-Step Riser Plates Black, 1200mm X 145mm

Watco Firm-Step Riser Plates Black, 1200mm X 145mm

Images for illustration purposes onlyWatco Firm-Step Covers and Landing Covers allow you to cover stair risers with an extremely durable slip resistant surface. Our Firm-Step Riser Plates finish the job to give vertical surfaces the same long lasting appearance. Watco Firm-Step Riser Plates have a smooth finish to avoid scuffing. They do not normally need to be cut to height as the top edge is hidden behind the step nosing. Risers are bonded into place using Watco Adhesive Mastic and secured by the step nosing. One 310ml cartridge will fix 4-5 linear metres of Firm-Step Riser Plates. FeaturesWill not rot, twist or warpMaintenance free: no maintenance requiredQuick and easy installationAvailable in a choice of widthsCan be used to close open risers

GBP 30.99
1

Watco Firm-Step Riser Plates Black, 2000mm X 145mm

Watco Firm-Step Riser Plates Black, 2000mm X 145mm

Images for illustration purposes onlyWatco Firm-Step Covers and Landing Covers allow you to cover stair risers with an extremely durable slip resistant surface. Our Firm-Step Riser Plates finish the job to give vertical surfaces the same long lasting appearance. Watco Firm-Step Riser Plates have a smooth finish to avoid scuffing. They do not normally need to be cut to height as the top edge is hidden behind the step nosing. Risers are bonded into place using Watco Adhesive Mastic and secured by the step nosing. One 310ml cartridge will fix 4-5 linear metres of Firm-Step Riser Plates. FeaturesWill not rot, twist or warpMaintenance free: no maintenance requiredQuick and easy installationAvailable in a choice of widthsCan be used to close open risers

GBP 46.99
1

Watco Firm-Step Riser Plates Black, 1000mm X 145mm

Watco Firm-Step Riser Plates Black, 1000mm X 145mm

Images for illustration purposes onlyWatco Firm-Step Covers and Landing Covers allow you to cover stair risers with an extremely durable slip resistant surface. Our Firm-Step Riser Plates finish the job to give vertical surfaces the same long lasting appearance. Watco Firm-Step Riser Plates have a smooth finish to avoid scuffing. They do not normally need to be cut to height as the top edge is hidden behind the step nosing. Risers are bonded into place using Watco Adhesive Mastic and secured by the step nosing. One 310ml cartridge will fix 4-5 linear metres of Firm-Step Riser Plates. FeaturesWill not rot, twist or warpMaintenance free: no maintenance requiredQuick and easy installationAvailable in a choice of widthsCan be used to close open risers

GBP 23.99
1

Watco Firm-Step Riser Plates Black, 800mm X 145mm

Watco Firm-Step Riser Plates Black, 800mm X 145mm

Images for illustration purposes onlyWatco Firm-Step Covers and Landing Covers allow you to cover stair risers with an extremely durable slip resistant surface. Our Firm-Step Riser Plates finish the job to give vertical surfaces the same long lasting appearance. Watco Firm-Step Riser Plates have a smooth finish to avoid scuffing. They do not normally need to be cut to height as the top edge is hidden behind the step nosing. Risers are bonded into place using Watco Adhesive Mastic and secured by the step nosing. One 310ml cartridge will fix 4-5 linear metres of Firm-Step Riser Plates. FeaturesWill not rot, twist or warpMaintenance free: no maintenance requiredQuick and easy installationAvailable in a choice of widthsCan be used to close open risers

GBP 19.99
1

Watco Chemi-Coat Rapid Black, 4L

Watco Chemi-Coat Rapid Black, 4L

Images for illustration purposes only Watco Chemi-Coat Rapid is a high build, tough floor coating which hardens rapidly and has good resistance to spillages of a wide range of chemicals. Features Easy to mix two part epoxy resin formula Cures rapidly to form a high build (250300 micron thick) glossy coating Hard wearing surface ideal for heavy use areas Only one coat usually required (although rapid curing allows 2 coats to be applied in one day) Virtually solvent free formula which can be used over most existing paints and coatings Will accept light traffic after 4 5 hours and normal traffic after 12 hours (at 20C) Approved for use on concrete with under floor heating systems (up to 30C surface temperature)

GBP 299.99
1

Watco Firm-Step Riser Plates Black, 3000mm X 145mm

Watco Firm-Step Riser Plates Black, 3000mm X 145mm

Images for illustration purposes onlyWatco Firm-Step Covers and Landing Covers allow you to cover stair risers with an extremely durable slip resistant surface. Our Firm-Step Riser Plates finish the job to give vertical surfaces the same long lasting appearance. Watco Firm-Step Riser Plates have a smooth finish to avoid scuffing. They do not normally need to be cut to height as the top edge is hidden behind the step nosing. Risers are bonded into place using Watco Adhesive Mastic and secured by the step nosing. One 310ml cartridge will fix 4-5 linear metres of Firm-Step Riser Plates. FeaturesWill not rot, twist or warpMaintenance free: no maintenance requiredQuick and easy installationAvailable in a choice of widthsCan be used to close open risers

GBP 69.99
1

6x Watco Safety Grip Cold Cure Black 5m2 Sgccblk

6x Watco Safety Grip Cold Cure Black 5m2 Sgccblk

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 1019.94
1

Watco Safety Grip Cold Cure Black 5m2

Watco Safety Grip Cold Cure Black 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99
1

Watco Heavy Duty Traffic Paint Black, 4L

Watco Heavy Duty Traffic Paint Black, 4L

Images for illustration purposes onlyWatco Heavy Duty Traffic Paint is a tough, two pack, solvent based epoxy resin coating for use in heavily trafficked concrete or asphalt, such as car parks, driveways and vehicle access areas.This versatile, exceptionally strong coating contains a solvent which bites into asphalt surfaces, and slightly penetrates concrete surfaces for the maximum possible adhesion without the need (generally) for a primer. Heavy Duty Traffic Paint carries CE Mark EN 1504-2 and has impressive test results for slip resistance, hardness, abrasion, adhesion and impact resistance.The high pigment level in this smooth finish exterior coating offers excellent covering power to keep your surfaces looking their best for longer. For areas where safety underfoot is required, Heavy Duty Anti Slip Traffic Paint is also available.Recommended areas of useCar parksDrivewaysTraffic routes and pedestrian walkwaysVehicle access areasColour coding and highlighting hazardous areasFeaturesExceptionally strong, two pack, solvent based epoxy resinTransforms, dull, drab asphalt, tarmac and concrete in heavy wear areasColours and protects with just one coatHigh pigment level offers excellent hiding powerSuitable for both asphalt and concreteExcellent chemical resistanceSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Drying Time Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 12 hours 6 hours 16 hours 36 hours 7 days20C 6 hours 4 hours 8 hours 24 hours 7 days30C 6 hours 3 hour 8 hours 24 hours 7 daysLight Traffic: FootMedium Traffic: Cars, trolley, pallet truck

GBP 179.99
1

Watco Heavy Duty Asphalt Paint Black 5L

Watco Heavy Duty Asphalt Paint Black 5L

Images for illustration purposes onlyWatco Heavy Duty Asphalt Paint is the ideal coating to transform and brighten up asphalt in heavier wear areas. It is quick and easy to use for painting large areas, and ideal for highlighting hazards, marking out parking bays and pedestrian areas, and for using with Watco Stencils.Our unique formulation creates a flexible, waterproofing coating thats most suited for use in light to medium trafficked areas, such as private car parks, driveways, tennis courts, playgrounds and warehouses. Watco Heavy Duty Asphalt Paint is available for heavier wear areas. It is quick and easy to use for painting large areas, and ideal for highlighting hazards, marking out parking bays and pedestrian areas, and for using with Watco Stencils.It has excellent UV resistance which helps protect against fading.Asphalt Paint carries CE Mark EN 1504-2 and has impressive test results for hardness, abrasion, adhesion, impact and flexibility.Its virtually solvent free and has an A+ VOC emissions rating.Recommended areas of useMarking out parking bays and pedestrian walkwaysColour coding and highlighting hazardous areasPlaygroundsTennis courtsDrivewaysFeaturesTransforms, dull, drab asphalt and tarmacExcellent resistance to UV and weatheringFlexible water based acrylic quick and easy to useColours, protects and waterproofs with just one coatHigh pigment level offers excellent hiding powerBreathableCan be applied to damp surfacesVirtually solvent free and odourless safe to use inside as well as outsideSuitable for both asphalt and concreteSuperior performance demonstrated by ISO testing to CE Mark EN1504-2 Drying Time Recoat Time Touch Dry Light Traffic Full Use 10C 16 hours 8 hours 48 hours 72 hours 20C 6 hours 4 hours 24 hours 48 hours 30C 3 hours 2 hour 12 hours 24 hours Light Traffic: FootMedium Traffic: Cars, trolley, pallet truck

GBP 159.99
1