23 results (0,12128 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Vesda Xtralis VPS-220-STX5 VESDA-E PSU STX 0.5A 14AH Black

Vesda Xtralis VPS-220-STX5 VESDA-E PSU STX 0.5A 14AH Black

Vesda Xtralis VPS-220-STX5 VESDA-E PSU STX 0.5A 14AH BlackVESDA-E Power Supply Units are uniquely designed to complement the style and appearance of VESDA-E aspirating smoke detectors ASDs and are technically matched to provide sufficient current and battery charging capacity to meet the requirement of EN 54-4.The STX variants are VdS certified and CE marked to EN54-4 so are particularly suitable for use in territories where these approvals are required.These are the shallower units in the range with depth and width matching the VESDA-E detectors.Internally they provide an EN 54-4 certified Power Supply rated to provide a 0.5A continuous 24Vdc supply whilst also charging the batteries not supplied which can be a 7 12 or uniquely 14Ah arrangement.As such the unit can be used with confidence to power and provide 24hr standby plus 0.5hr in alarm for the VESDA VLF-500 VESDA-E VEP VESDA-E VES detectors and also the VESDA-E VEU detectors up to fan speed 5.The unit also provides a non-certified setting which enables it to power loads up to 1A while recharging batteries up to 12Ah in accordance with EN 54-4.

GBP 307.93
1

Vesda Xtralis M8 Nut - Pack of 10 PIP-029

Vesda Xtralis M8 Nut - Pack of 10 PIP-029

Vesda Xtralis M8 Nut - Pack of 10 PIP-029M8 Nut for fitting clip to the end of threaded rod.VESDA Aspirating Pipe and Fittings are produced in red ABS under a stringent quality control system approved to BS EN ISO 9001 EN54 - 20 and EN61386-1 Class 1131 ABS Acrylonitrile Butadiene Styrene is a robust polymer which has the most suitable physical properties for aspirating detection optimising performance with tensile strength chemical resistance ductility weatherability heat stability and processability.The range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system. They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you the quality you are used to as a VESDA customer.Please Note The PIP-029 is equivalent to the ACCPCN025B.

GBP 7.37
1

Vesda Xtralis 25mm to 38 BSP Female Air Line Adaptor PIP-022 Pack of 10

Vesda Xtralis 25mm to 38 BSP Female Air Line Adaptor PIP-022 Pack of 10

Vesda Xtralis 25mm to 38 BSP Female Air Line Adaptor PIP-022The 25mm to 38 BSP Female Air Line Adaptor is for use with Vesda Xtralis pipework.It is made from Acrylonitrile Butadiene Styrene which is a robust polymer designed to have the most suitable physical properties for aspirating detection.Key FeaturesMaterial ABSColour RedBS EN ISO 9001 EN54-20 and EN61386-1 Class 1131 ApprovedPack of 10Please Note The PIP-022 is equivalent to the REDALT0250

GBP 107.76
1

Vesda Xtralis WHTCTII0250-10 25mm10mm White Capillary Tee

Vesda Xtralis WHTCTII0250-10 25mm10mm White Capillary Tee

Vesda Xtralis WHTCTII0250 25mm10mm White Capillary Tee - Pack of 10The WHTCTII0250 is a 25mm10mm White Capillary Tee.VESDA Aspirating Pipe and Fittings are produced in ABS under a stringent quality control system approved to BS EN ISO 9001 EN54 - 20 and EN61386-1 Class 1131 ABS Acrylonitrile Butadiene Styrene is a robust polymer which has the most suitable physical properties for aspirating detection optimising performance with tensile strength chemical resistance ductility weatherability heat stability and processability.The range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system. They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you the quality you are used to as a VESDA customer.The pipes are a metric standard of 25 mm external diameter with suitable adapters available for imperial to metric conversions and are designed for use with any make of low pressure aspirating type smoke detection system.Key FeaturesEquivalent to PIP-016-W25mm10mmColour White

GBP 69.18
1

Vesda Xtralis 25mm10mm Compression Adaptor Pack of 10

Vesda Xtralis 25mm10mm Compression Adaptor Pack of 10

Vesda Xtralis 25mm10mm Compression Adaptor Pack of 10Adaptor Fitting PlainCompression 25mm x 10mm. VESDA Aspirating Pipe and Fittings are produced in red ABS under a stringent quality control system approved to BS EN ISO 9001 EN54 - 20 and EN61386-1 Class 1131 ABS Acrylonitrile Butadiene Styrene is a robust polymer which has the most suitable physical properties for aspirating detection optimising performance with tensile strength chemical resistance ductility weatherability heat stability and processability.The range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system. They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you the quality you are used to as a VESDA customer.Key FeaturesMaterial ABSColour RedOperating temperature range -40C to 70CEN54 testedThese adaptors allow for connection of10mm capillary pipetubes to pipe. The plain end is to be glued to the pipe usingABS solvent cement.Please note The PIP-034 is equivalent to the REDADI025A.

GBP 63.50
1

Vesda Xtralis VPS-250-STX5-SLV Power Supply 0.5A 24-38AH PSU-STX - Silver

Vesda Xtralis VPS-250-STX5-SLV Power Supply 0.5A 24-38AH PSU-STX - Silver

Vesda Xtralis VPS-250-STX5-SLV Power Supply 0.5A 24-38AH PSU-STX - SilverVESDA-E Power Supply Units are uniquely designed to complement the style and appearance of VESDA-E aspirating smoke detectors ASDs and are technically matched to provide sufficient current and battery charging capacity to meet the requirement of EN 54-4.The STX variants are VdS certified and CE marked to EN54-4 so are particularly suitable for use in territories where these approvals are required. Style STX Product Range Designed with the same widths and styling of the VESDA-E detectors these power supplies geometrically blend with the VESDA-E detectors.They feature the same curved profile and also incorporate an internal channel which accommodates the exhaust of the VESDA-E detectors. This is particularly useful when it is necessary to run the 25mm exhaust pipe back to the protected area back-venting.The units are available in two colours Matt black is standard and works in harmony with the finish of the black plastic VESDA-E detectors the P variants or contrasts with the extruded aluminium finish of other variants.Alternatively the unit can also be supplied with a grey RAL 7047 cover which complements the extruded aluminium finish of the premium VESDA-E Detectors.VPS-250-STX5 VPS250-STX5-SLV 3A load with 24Ah batteries max These are the deeper units designed for installation with a VESDA-E VEU detector at all fan speeds.The internal charger is EN 54-4 certified and is rated to provide a 3A continuous 24Vdc supply. There is space for up to 24Ah batteries not provided.The unit also provides a non-certified setting which enables it to power loads up to 3.4A while recharging batteries up to 24Ah in accordance with EN 54-4.

GBP 481.73
1

Vesda Xtralis VPS-250-STX5 VESDA-E STX PSU 2A 24AH

Vesda Xtralis VPS-250-STX5 VESDA-E STX PSU 2A 24AH

Vesda Xtralis VPS-250-STX5 VESDA-E STX PSU 2A 24AHVESDA-E Power Supply Units are uniquely designed to complement the style and appearance of VESDA-E aspirating smoke detectors ASDs and are technically matched to provide sufficient current and battery charging capacity to meet the requirement of EN 54-4.The STX variants are VdS certified and CE marked to EN54-4 so are particularly suitable for use in territories where these approvals are required. Style STX Product Range Designed with the same widths and styling of the VESDA-E detectors these power supplies geometrically blend with the VESDA-E detectors.They feature the same curved profile and also incorporate an internal channel which accommodates the exhaust of the VESDA-E detectors. This is particularly useful when it is necessary to run the 25mm exhaust pipe back to the protected area back-venting.The units are available in two colours Matt black is standard and works in harmony with the finish of the black plastic VESDA-E detectors the P variants or contrasts with the extruded aluminium finish of other variants.Alternatively the unit can also be supplied with a grey RAL 7047 cover which complements the extruded aluminium finish of the premium VESDA-E Detectors.VPS-250-STX5 VPS250-STX5-SLV 3A load with 24Ah batteries max These are the deeper units designed for installation with a VESDA-E VEU detector at all fan speeds.The internal charger is EN 54-4 certified and is rated to provide a 3A continuous 24Vdc supply. There is space for up to 24Ah batteries not provided.The unit also provides a non-certified setting which enables it to power loads up to 3.4A while recharging batteries up to 24Ah in accordance with EN 54-4.

GBP 449.65
1

Vesda Xtralis 25mm In-line Expansion Socket 100mm PIP-019

Vesda Xtralis 25mm In-line Expansion Socket 100mm PIP-019

Vesda Xtralis 25mm In-line Expansion Socket 100mm PIP-019These sockets are used in the installation of pipework where buildings may contract or expand or have fluctuation of temperatures. They allow for movement within the pipework while maintaining a sealed connection due to the internal rubber gaskets.VESDA Aspirating Pipe and Fittings are produced in red ABS under a stringent quality control system approved to BS EN ISO 9001 EN54 - 20 and EN61386-1 Class 1131 ABS Acrylonitrile Butadiene Styrene is a robust polymer which has the most suitable physical properties for aspirating detection optimising performance with tensile strength chemical resistance ductility weatherability heat stability and processability.The range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system. They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you the quality you are used to as a VESDA customer.Key Features Tech SpecsMaterial ABSColour RedOperating temperature range -40C to 70CLength 100mmEN54 testedPlease Note The PIP-019 is equivalent to the REDEXSOC.

GBP 19.73
1

Vesda Xtralis VPS-220-STX5-SLV Power Supply 0.5A 7-14AH PSU-STX - Silver

Vesda Xtralis VPS-220-STX5-SLV Power Supply 0.5A 7-14AH PSU-STX - Silver

Vesda Xtralis VPS-220-STX5-SLV Power Supply 0.5A 7-14AH PSU-STX - SilverVESDA-E Power Supply Units are uniquely designed to complement the style and appearance of VESDA-E aspirating smoke detectors ASDs and are technically matched to provide sufficient current and battery charging capacity to meet the requirement of EN 54-4.The STX variants are VdS certified and CE marked to EN54-4 so are particularly suitable for use in territories where these approvals are required. Style STX Product Range Designed with the same widths and styling of the VESDA-E detectors these power supplies geometrically blend with the VESDA-E detectors.They feature the same curved profile and also incorporate an internal channel which accommodates the exhaust of the VESDA-E detectors. This is particularly useful when it is necessary to run the 25mm exhaust pipe back to the protected area back-venting.The units are available in two colours Matt black is standard and works in harmony with the finish of the black plastic VESDA-E detectors the P variants or contrasts with the extruded aluminium finish of other variants.Alternatively the unit can also be supplied with a grey RAL 7047 cover which complements the extruded aluminium finish of the premium VESDA-E Detectors.VPS-220-STX5 VPS220-STX5-SLV 0.5A load with 14Ah batteries max These are the shallower units in the range with depth and width matching the VESDA-E detectors.Internally they provide an EN 54-4 certified Power Supply rated to provide a 0.5A continuous 24Vdc supply whilst also charging the batteries not supplied which can be a 7 12 or uniquely 14Ah arrangement.As such the unit can be used with confidence to power and provide 24hr standby plus 0.5hr in alarm for the VESDA VLF-500 VESDA-E VEP VESDA-E VES detectors and also the VESDA-E VEU detectors up to fan speed 5.The unit also provides a non-certified setting which enables it to power loads up to 1A while recharging batteries up to 12Ah in accordance with EN 54-4.

GBP 340.01
1

Vesda Xtralis 128-015 Smoke Detector Pipe Label - Pack of 100

Vesda Xtralis 128-015 Smoke Detector Pipe Label - Pack of 100

Vesda Xtralis 128-015 Label - Smoke Detector Pipe- Pack of 100Suction detector pipe label for marking the pipe system.Our range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you the quality you are used to as a VESDA customer.The pipes are a metric standard of 25 mm external diameter with suitable adapters available for imperial to metric conversions and are designed for use with any make of low pressure aspirating type smoke detection system.

GBP 14.40
1

Vesda Xtralis 25mm x 12 Condensation Valve Trap with Ball Valve

Vesda Xtralis 25mm x 12 Condensation Valve Trap with Ball Valve

Vesda Xtralis 25mm x 12 Condensation Valve Trap with Ball ValveThe Vesda Condensation Drain PIP-025 is manufactured to comply with the following requirements BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 ensuring that you receive the quality you expect from a VESDA product. Pipes come as a standard 25 mm external diameter with adapters for imperial and metric conversions and are designed for use with any make of low-pressure aspirating type smoke detection system. If you are not UK based please check availability of pipe as they are not available in certain countries.Water trap with clear pipe and ball valve 1 piece.Please note The PIP-025 is equivalent to the REDSGVD025I.

GBP 112.27
1

Vesda Xtralis 128-014-XTR Label Sampling Point Roll of 100

Vesda Xtralis 128-014-XTR Label Sampling Point Roll of 100

Vesda Xtralis 128-014 Label Sampling Point Roll of 100Round sampling point label 100 pieces on roll which are used to clearly mark where sampling points are in aspiration pipework.The range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.The pipes are a metric standard of 25 mm external diameter with suitable adapters available for imperial to metric conversions and are designed for use with any make of low-pressure aspirating type smoke detection system.They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you the quality you are used to as a VESDA customer.

GBP 11.00
1

Vesda Xtralis PIP-001-2.4 Red ABS Pipe - 2.4m Length Pack of 25

Vesda Xtralis PIP-001-2.4 Red ABS Pipe - 2.4m Length Pack of 25

Please note If purchasing outside of the UK including Northern Ireland an extra delivery charge may be applied after purchase. Please contact us for more information.Vesda Xtralis PIP-001-2.4 Red ABS Pipe - 2.4m Length Pack of 25This red ABS pipe is designed specifically for the aspirating smoke detection industry. As an air sampling pipe air is transported back to the smoke detector.Vesda Xtralis range of Pipes and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system. They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20.The pipe is supplied in 2.4 metre lengths.Key FeaturesOptimising performanceTough and durableChemical resistance propertiesLightweightPack of 25

GBP 90.72
1

Vesda Xtralis VPS-220-E5 Power Supply FM Approved Style E

Vesda Xtralis VPS-220-E5 Power Supply FM Approved Style E

Vesda Xtralis VPS-220-E5 Power Supply FM Approved Style EXtralis Power Supply Units are uniquely designed to complement the style and appearance of Xtralis aspirating smoke detectors ASDs and are technically matched to provide sufficient current and battery charging capacity to meet the requirements of EN 54-4.The Style E variants are VdS certified and CE marked to the EN54-4 so are particularly suitable for use in territories where these approvals are required.This is the original unit within the range. Designed with the same footprint as the VESDA-E VEP VES and VEU detectors this power supply will not look out of place powering these detectors.Internally is an EN54-4 certified Power Supply rated to provide a 0.5A continuous 24Vdc supply while also charging the batteries not supplied which can be a 7 12 or uniquely 14Ah arrangement.As such the unit can be used with confidence to power and provide 24hr standby plus 0.5hr in alarm for the VESDA VLF-500 VESDA-E VEP VESDA-E VES detectors and also the VESDA-E VEU detectors up to fan speed 5.With regard to installation cable entry knockouts line up with those on the VESDA-E detectors allowing for convenient positioning of the power supply directly adjacent to the detector.The front cover is fitted with 2 LEDs giving a quick visual indication of OK andor fault conditionThere is also an internal status LED to aid fault diagnosis.The unit also provides a non-certified setting which enables it to power loads up to 1A while recharging batteries up to 12Ah in accordance with EN 54-4.

GBP 295.68
1

Vesda Xtralis VPS-250-E5 24V 2A Power Supply Unit 38AHR

Vesda Xtralis VPS-250-E5 24V 2A Power Supply Unit 38AHR

Vesda Xtralis VPS-250-E5 24V 2A Power Supply Unit 38AHRXtralis Power Supply Units are uniquely designed to complement the style and appearance of Xtralis aspirating smoke detectors ASDs and are technically matched to provide sufficient current and battery charging capacity to meet the requirements of EN 54-4. The VPS-250-E5 variant is VdS certified and CE marked to the EN54-4 so is particularly suitable for use in territories where these approvals are required. It may also be suitable in territories where ISO 7240-4 is required.VPS-250-E5 3A load 38Ah batteries maxThis power supply is capable of powering larger ASD units including the VESDA-E VEU at all fan speeds and the VESDA-E VEA detectors. It may also be used for installations with multiple detectors andor remote displays. The internal charger is EN54-4 certified to power loads up to 3A and there is space and charging capacity for batteries up to 38 Ah batteries. Uniquely the unit is supplied with the provision to deliver 4 separately fused outputs recommended when it is used to power multiple detectors or disparate loads. This is a very versatile unit which can deliver to a combined 24Vdc load of up to 3A. The front cover supports 2 LEDs to provide visual indication of Healthy status OK or fault condition and various knockouts exist to provide convenient cabling access to detectors remote displays or subracks. The unit also provides a non-certified setting which enables it to power loads up to 3.4A while recharging batteries up to 38Ah in accordance with EN 54-4.Key FeaturesSupports a 3A load and up to 38Ah batteriesTemperature compensated charging to maximize battery lifeDesigned to blend in with Xtralis detectorsExternal LED indication OK and FaultRelay outputs for connection to the general-purpose input for fault monitoring230Vac only

GBP 468.31
1

Vesda Xtralis WHTFLXI25B 25mm Flexible 1m Long Bend

Vesda Xtralis WHTFLXI25B 25mm Flexible 1m Long Bend

Vesda Xtralis WHTFLXI25B 25mm Flexible 1m Long BendThe WHTFLXI25B is a 25mm Flexible 1m Long Bend.VESDA Aspirating Pipe and Fittings are produced in ABS under a stringent quality control system approved to BS EN ISO 9001 EN54 - 20 and EN61386-1 Class 1131 ABS Acrylonitrile Butadiene Styrene is a robust polymer which has the most suitable physical properties for aspirating detection optimising performance with tensile strength chemical resistance ductility weatherability heat stability and processability.The range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.The pipes are a metric standard of 25 mm external diameter with suitable adapters available for imperial to metric conversions and are designed for use with any make of low-pressure aspirating type smoke detection system.Key FeaturesEquivalent to PIP-021-W25mm in diameter1 metre length

GBP 29.59
1

Vesda Xtralis VPS-215-E5 24V 0.5A Power Supply Unit 7AHR

Vesda Xtralis VPS-215-E5 24V 0.5A Power Supply Unit 7AHR

Vesda Xtralis VPS-215-E5 24V 0.5A Power Supply Unit 7AHRXtralis Power Supply Units are uniquely designed to complement the style and appearance of Xtralis aspirating smoke detectors ASDs and are technically matched to provide sufficient current and battery charging capacity to meet the requirements of EN 54-4.The Style E variants are VdS certified and CE marked to the EN54-4 so are particularly suitable for use in territories where these approvals are required.The 0.5A load with 7Ah batteries max is the budget unit within the range.It is intended as a low-cost unit to supply a single pipe ASD detector which only requires 7Ah batteries such as the VESDA VLF-250.A simple but elegant construction and no LEDs on the lid keep the cost of the unit to a minimum.The unit can also be inverted where necessary by rotating the lid.The internal charger is EN54-4 certified and internal LEDs are provided to indicate OK output healthy and Fault.

GBP 242.62
1

Vesda Xtralis PIP-014 Pipe Cutters

Vesda Xtralis PIP-014 Pipe Cutters

Vesda Xtralis PIP-014 Pipe CuttersHard wearing tool for neat cuts in pipes it comes complete with a V shaped long lasting blade which is made from high carbon steel. In turn this reduces tube deformation.It features a comfortable handle without a return spring for ease of use.The Vesda range of Pipes and Fittings have been specially developed to provide fully matched components for the optimal performance of your whole Vesda aspirating system.They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you quality.The pipes are a metric standard of 25mm external diameter with suitable adapters available for imperial to metric conversions and are designed for use with any make of low pressure aspirating type smoke detection system.Unlike some metal pipes Vesda ABS pipework is very light in weight. This makes it easy to handle in high and difficult places where systems are often installed. The standard Vesda pipe and fittings are supplied in red to identify their service as fire.Key FeaturesShipping weight 1000gmsComfortable handleNeat cutsV shaped bladePlease Note The PIP-014 is equivalent to the REDPIPC.

GBP 81.65
1

Vesda Xtralis Air Sampling Test Point with Cap

Vesda Xtralis Air Sampling Test Point with Cap

Vesda Xtralis Air Sampling Test Point with Cap - Pack of 10They are designed to measure the transportation time a small quantity of smoke is introduced at the furthest point and the measurement in time is calculated from when the smoke enters the sampling point to when the ASD reacts. The maximum transport time is 120 seconds 2 minutes. Test points are the ideal solution for flexibility and convenience. They are installed at the end of the pipe run however for areas such as a lift shaft where accessibility is limited the pipe run can be brought into a riser.A key element of the VESDA system is its suction system which actively transports air from the protected area to the detector.The test point is for periodic smoke testing of the VESDA system for hard to reach areas.VESDA installations can be designed for the most complex areas using carefully selected shaped elements.The use of these shaped elements has a positive effect on the pneumatic system of the installation which translates into the unique and legendary quality of the VESDA system work in each pneumatic system.The suction installation is calculated with theASPIREprogramme.The program is used for modelling and visualization of aspiration installations class calculation in accordance with PN-EN-54-20.Key FeaturesPack of 10Please note The PIP-027 is equivalent to the REDAST025C.

GBP 7.49
1

Vesda-E VEA VSP-990-330 6mm Microbore Tube UL-compliant Plenum-rated 330ft

Vesda-E VEA VSP-990-330 6mm Microbore Tube UL-compliant Plenum-rated 330ft

Vesda-E VEA VSP-990-330 6mm Microbore Tube UL-compliant Plenum-rated 330ftVESDA-E VEA microbore tubes are custom made high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance. They are lightweight and flexible for easy handling and installation and marked with a white ink numbering system over the full length of the tubing. The numbering system includes individual unique identification of each tube and distance marking at regular intervals making them very efficient to install and keep clean installationrecords.These tubes come in black colour with red stripes for use in smoke detection and meet requirements of global installation codes. These tubes have no active components and they eliminate the need for any electrical wiring for smoke detection resulting in fast and easy installation without the need to follow electrical codes.It is important to use VESDA-E VEA microbore tubes with the VESDA-E VEA detectors to maintain their smoke detection performance. These tubes come in two different diameters 6mm and 4mm.VEA micrbore tube fittings comprise of straight unions and other types of joiners and 6mm to 4mm adaptors for easy installations blanking plugs are used to block the unused ports on VEA.Key FeaturesPlenum ratedFlame retardantHigh quality polyethylene materialStress crack resistantUnique IDDistance marking at regular intervalsMeets requirements of global installation codesListings ApprovalsUL 1820NFPA 90AEN 54-202006 clause 5.7BS EN 61386-12007 clauses 10.2 10.3 and 12.2

GBP 156.30
1

Xtralis FLX-020 FAAST FLEX Dual Pipe ASD Unit

Xtralis FLX-020 FAAST FLEX Dual Pipe ASD Unit

Xtralis FLX-020 FAAST FLEXDualPipe ASD UnitXtralis FAAST FLEX offers a highly flexible and cost-effective ASD solution for a wide range of applications such as small to medium warehouses cold storage elevator shafts ceiling and underfloor voids transformer and electrical rooms rest rooms and the like. FAAST FLEX provides consistent detection with minimum nuisance alarms to reduce operational costs enabled by improved detection chamber design.FAAST FLEX allows a high degree of flexibility through pre-engineered pipe network designs and true out-of-the-box operation with a built-in user-friendly configuration and control mechanism. It can be configured and commissioned using a 10-line dip-switch arrangement without the need for a special tool.Through its Bluetooth interface and associated smartphone applications FAAST FLEX offers extended configuration options and rapid diagnostics.FAAST FLEX is easy to install with reduced effort and time 1-man installation with an installation template different orientations direct wall-mounting and ample room for wiring. Through its modular design and field replaceable components FAAST FLEX allows convenient in-field service and maintenance thus minimizing downtime and reducing ongoing maintenance costs.How It WorksAir is drawn into the FAAST FLEX through a network of air sampling pipes by speed adjustable aspirator. Each pipe inlet has an airflow sensor that monitors airflow changes in the pipe. Inside the FAAST FLEX a sample of air is filtered and passed into the detection chamber and analysed for the presence of very small amounts of smoke. Air is exhausted from the FAAST FLEX and may be vented back into the protected zone.Key FeaturesReliable smoke detection for consistent performance and minimum nuisance alarmsSingle Dual channel variants with area coverage up to 1600m 17200 sq.ft for single channel and 2000m 21527 sq.ft for dual channelDouble knock capability Dual Channel for coincident detectionPipe length up to 270m 886 ft for single channel and 420m 1378 ft for dual channel allowing extended coverage and convenient detector mountingClass A B C performance allowing - 1 channel 5 15 32 holes respectively - 2 channels 8 28 56 holes respectivelyAn ultrasonic flow sensing element per chamber for accurate and reliable flow detectionA metallic mesh filter per chamber for optics protection and improved detector longevityAction Alarm and Fault relays per channel for connection to FACP and BMS systemsSimplified and intuitive LEDs user interface for immediate status indicationPre-engineered pipe networks for hassle-free and expedient design and installationTwo configuration modes - Out-of-box with built in user-friendly configuration and control mechanism for speedy commissioning - Extended for enhanced user experienceModular design with in-field replaceable chamber filter and aspirator for ease of service and maintenanceInstallation template different mounting orientations upright inverted and ample wiring room to save time and effortQuiet operation 30db with adjustable fan speed to suit various environmentsSuitable for cold storage environments with -40 C -40F operating temperatureBluetooth interface with mobile device App for extended configuration options and rapid diagnosticsGeneral Purpose Input GPI for remote Reset Disable External FaultPassword protected access for secured detector operation diagnostics and maintenanceIP40 rating for protection against ingress of foreign bodiesOnboard event log up to 2100 events for user actions and smoke trends

GBP 1237.62
1

Xtralis FLX-010 FAAST FLEX Single Pipe ASD Unit

Xtralis FLX-010 FAAST FLEX Single Pipe ASD Unit

Xtralis FLX-010 FAAST FLEX Single Pipe ASD UnitXtralis FAAST FLEX offers a highly flexible and cost-effective ASD solution for a wide range of applications such as small to medium warehouses cold storage elevator shafts ceiling and underfloor voids transformer and electrical rooms rest rooms and the like. FAAST FLEX provides consistent detection with minimum nuisance alarms to reduce operational costs enabled by improved detection chamber design.FAAST FLEX allows a high degree of flexibility through pre-engineered pipe network designs and true out-of-the-box operation with a built-in user-friendly configuration and control mechanism. It can be configured and commissioned using a 10-line dip-switch arrangement without the need for a special tool.Through its Bluetooth interface and associated smartphone applications FAAST FLEX offers extended configuration options and rapid diagnostics.FAAST FLEX is easy to install with reduced effort and time 1-man installation with an installation template different orientations direct wall-mounting and ample room for wiring. Through its modular design and field replaceable components FAAST FLEX allows convenient in-field service and maintenance thus minimizing downtime and reducing ongoing maintenance costs.How It WorksAir is drawn into the FAAST FLEX through a network of air sampling pipes by speed adjustable aspirator. Each pipe inlet has an airflow sensor that monitors airflow changes in the pipe. Inside the FAAST FLEX a sample of air is filtered and passed into the detection chamber and analysed for the presence of very small amounts of smoke. Air is exhausted from the FAAST FLEX and may be vented back into the protected zone.Key FeaturesReliable smoke detection for consistent performance and minimum nuisance alarmsSingle Dual channel variants with area coverage up to 1600m 17200 sq.ft for single channel and 2000m 21527 sq.ft for dual channelDouble knock capability Dual Channel for coincident detectionPipe length up to 270m 886 ft for single channel and 420m 1378 ft for dual channel allowing extended coverage and convenient detector mountingClass A B C performance allowing - 1 channel 5 15 32 holes respectively - 2 channels 8 28 56 holes respectivelyAn ultrasonic flow sensing element per chamber for accurate and reliable flow detectionA metallic mesh filter per chamber for optics protection and improved detector longevityAction Alarm and Fault relays per channel for connection to FACP and BMS systemsSimplified and intuitive LEDs user interface for immediate status indicationPre-engineered pipe networks for hassle-free and expedient design and installationTwo configuration modes - Out-of-box with built in user-friendly configuration and control mechanism for speedy commissioning - Extended for enhanced user experienceModular design with in-field replaceable chamber filter and aspirator for ease of service and maintenanceInstallation template different mounting orientations upright inverted and ample wiring room to save time and effortQuiet operation 30db with adjustable fan speed to suit various environmentsSuitable for cold storage environments with -40 C -40F operating temperatureBluetooth interface with mobile device App for extended configuration options and rapid diagnosticsGeneral Purpose Input GPI for remote Reset Disable External FaultPassword protected access for secured detector operation diagnostics and maintenanceIP40 rating for protection against ingress of foreign bodiesOnboard event log up to 2100 events for user actions and smoke trends

GBP 966.89
1