16 results (0,15027 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Vesda Xtralis 020-055 19quot Enclosure for Sub-Rack 5 Rows

Vesda Xtralis 020-055 19quot Enclosure for Sub-Rack 5 Rows

Vesda Xtralis 020-055 19 Enclosure for Sub-Rack 5 Rows19 Subrack and Detector Enclosures to complement the VESDA range of detectors displays and programmers a range of glass fronted enclosures are available.The 19-inch rack enclosures are designed to house up to 20 display and programmer modules in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required. Two versions are available 2 rack up to 8 Modules and 5 rack up to 20 Modules.19 Subracks ordered separately as VSR-xxxx are mounted on a swing frame for convenient connection of all the cables. Cable entry for 24VDC power VESDAnet connection and interfacing to the relays is provided by a removable gland plate which is drilled as required on site. 19 Subracks and 3U blank panels must be ordered separately.Detector or single remote display EnclosureA detector enclosure is also available which incorporates a small glass window to view an on-board display.This detector enclosure enables a single detector or remote module to be installed in challenging environments where a high IP rating is required.The enclosure can accommodate a single VESDA VLP VESDA VLS VESDA VLC or VESDA VLF detector or a single remote module such as a VRT-200. It is supplied with all appropriate cable and pipe entries pre-drilled for each device and enough plugs to blank off those holes not used.A kit of pipe fittings and instructions is supplied to ensure that the IP rating of the enclosure is maintained but cable glands are NOT supplied as they depend on the cable to be used.

GBP 2294.89
1

Vesda 020-050-E IP66 Enclosure

Vesda 020-050-E IP66 Enclosure

Vesda 020-050-E IP66 EnclosureTo complement the VESDA range of detectors displays and programmers an IP66 enclosure is available. This enclosure is built to accommodate either a VESDA-E VEU VESDA-E VEP VESDA-E VES or VESDA VLF detector. The enclosure has a hinged door for easy access for installation and maintenance which includes a glass window to view the onboard display. It includes predrilled holes for inlet and exhaust ports and cable entries so that installation of a detector is a simple process requiring minimum tools. Moreover the enclosure is supplied with pipe fitting to ensure that the IP66 integrity of the enclosure is maintained.

GBP 855.55
1

Xtralis OSID Imager Environmental Housing OSID-EHI

Xtralis OSID Imager Environmental Housing OSID-EHI

Xtralis OSID Imager Environmental Housing OSID-EHICustom designed IP 66 NEMA 4-4X protective and environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The housings are only to be used with 1 on 1 systems. The glazed housings are made of ABS. The glass window causes minimal attenuation of the UV and IR beams.Installation and servicing is extremely easy. The imager housing has two glands for easy wiring. The Emitter housing can be used with both battery powered and 24V wired emitter. To access to the Imagers FTDI socket the lid needs to be removed. A separate cable inlet directly below the FTDI socket is normally sealed but can be fitted with an additional gland supplied with the enclosure for servicing or upgrading the imager.Both the imager and emitter housing have 3 pre-drilled screw connections for fixed mounting of the unit. The imager has an additional glass window at the bottom of the housing to allow the Alarm and Fault LEDs to be seen from below. Where condensation is expected both housings can be equipped inside with a heater of minimum 5W.Key Features IP66 NEMA 4-4X for use in harsh environments Imager with extra viewing opening for Alarm and Fault LEDS Dedicated entry for OSP-001 FTDI cable Fast and easy installation- entry and exit opening for wiring Protects against dust and water

GBP 224.53
1

Xtralis OSID-EHE OSID Emitter Environmental Housing

Xtralis OSID-EHE OSID Emitter Environmental Housing

Xtralis OSID-EHE OSID Emitter Environmental HousingCustom designed IP 66 NEMA 4-4X protective and environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The housings are only to be used with 1 on 1 systems. The glazed housings are made of ABS. The glass window causes minimal attenuation of the UV and IR beams.Installation and servicing is extremely easy. The imager housing has two glands for easy wiring. The Emitter housing can be used with both battery-powered and 24V wired emitter. To access to the Imagers FTDI socket the lid needs to be removed. A separate cable inlet directly below the FTDI socket is normally sealed but can be fitted with an additional gland supplied with the enclosure for servicing or upgrading the imager.Both the imager and emitter housing have 3 pre-drilled screw connections for fixed mounting of the unit. The imager has an additional glass window at the bottom of the housing to allow the Alarm and Fault LEDs to be seen from below. Where condensation is expected both housings can be equipped inside with a heater of minimum 5W.Key Features IP66 NEMA 4-4X for use in harsh environments Imager with extra viewing opening for Alarm and Fault LEDS Dedicated entry for OSP-001 FTDI cable Fast and easy installation- entry and exit opening for wiring Protects against dust and water

GBP 176.90
1

Vesda 020-052 19quot Enclosure for Sub-Rack 2 Rows

Vesda 020-052 19quot Enclosure for Sub-Rack 2 Rows

Vesda 020-052 19 Enclosure for Sub-Rack 2 RowsTo compliment the VESDA range of detectors displays and programmers a 19 inch Subrack enclosure is available. The 19 inch rack enclosure is designed to house up to 12 display andor programmer modules VESDAnet sockets or relay only modules in a wide variety of configurations to suit the particular requirements of a site where centralized control and monitoring of the VESDA system is required.19 Subracks can be installed in glass fronted enclosures and are mounted on a swing frame for convenient connection of all the cables. Cable entry for 24 VDC power VESDAnet connection and interfacing to the relays is provided by multiple knock-outs on all four sides of the box. 19 Subracks and blank panels must be ordered separately. Each enclosure will accommodate up to 3 subracks. If utilising only 1 or 2 racks the VESDA Power Supply VPS-100-US-xxx can also be mounted in the enclosure.A detector enclosure is also available which incorporates a small glass window to view an on-board display. The detector enclosure enables a single detector to be installed in challenging environments where a high IP rating is required.Key FeaturesDual hinged glass door provides easy access to VESDA modules and termination boardsSecond door provides access to the termination boardsDesigned for easy mountingMultiple knock-outs for easy cable entryHolds up to 3 subracksFull size lockable window and door

GBP 2037.12
1

Vesda-E VEA VEA-040-A10 40-Tube Addressable Detector with 3.5quot Touchscreen Display

Vesda-E VEA VEA-040-A10 40-Tube Addressable Detector with 3.5quot Touchscreen Display

Vesda-E VEA VEA-040-A10 40-Tube Addressable Detector with 3.5 Touchscreen DisplayThe VESDA-E VEA-040-A10 is an aspirating smoke detector ASD that provides early warning of fire conditions by drawing air samples through a multi-hole addressable microbore tube air-sampling network.The detector easily interfaces with fire warning and fire suppression release systems and can be integrated into a building management system BMS.Key FeaturesThe VEA-040-A10 detector contains the following featuresPinpoint addressability with superior detection compared to spot detectors40 addressable microbore tubes with individual sampling pointsAssured detection with end to end system integrity monitoringInterruption-free business operation with centralized testing and maintenanceSingle sampling point or single tube blockage detectionAutomatic sampling point cleaningThree sensitivity settings for the sampling pointsVariable length capillary tubes up to 100 m 328 ftLaser-based absolute smoke detectionDual stage filtering and clean air barrier for optics protectionReliable linear pump technologyLEDs for alarm and fault signalling3.5 colour touch screen for status reviewSeven programmable relaysTwo GPIs monitored and unmonitoredPC software supportiVESDA app for system monitoring on mobile devicesIP 40 enclosure not UL testedEasy mounting with steel support bracketField replaceable filter smoke sensor module pump and rotary valveVESDAnet networkingEthernet 100 base TWiFi 802.11 bgnLocal host-mode USB portEasy cable termination accessEvent Log 20000 events

GBP 8241.78
1

Vesda-E VEA VEA-040-A00 40-Tube Addressable Detector with LEDs Display

Vesda-E VEA VEA-040-A00 40-Tube Addressable Detector with LEDs Display

Vesda-E VEA VEA-040-A00 40-Tube Addressable Detector with LEDs DisplayThe VESDA-E VEA-040-A10 is an aspirating smoke detector ASD that provides early warning of fire conditions by drawing air samples through a multi-hole addressable microbore tube air-sampling network.The detector easily interfaces with fire warning and fire suppression release systems and can be integrated into a building management system BMS.Key FeaturesThe VEA-040-A10 detector contains the following featuresPinpoint addressability with superior detection compared to spot detectors40 addressable microbore tubes with individual sampling pointsAssured detection with end to end system integrity monitoringInterruption-free business operation with centralized testing and maintenanceSingle sampling point or single tube blockage detectionAutomatic sampling point cleaningThree sensitivity settings for the sampling pointsVariable length capillary tubes up to 100 m 328 ftLaser-based absolute smoke detectionDual stage filtering and clean air barrier for optics protectionReliable linear pump technologyLEDs for alarm and fault signalling3.5 colour touch screen for status reviewSeven programmable relaysTwo GPIs monitored and unmonitoredPC software supportiVESDA app for system monitoring on mobile devicesIP 40 enclosure not UL testedEasy mounting with steel support bracketField replaceable filter smoke sensor module pump and rotary valveVESDAnet networkingEthernet 100 base TWiFi 802.11 bgnLocal host-mode USB portEasy cable termination accessEvent Log 20000 events

GBP 7487.12
1

Vesda Xtralis VPS-220-E5 Power Supply FM Approved Style E

Vesda Xtralis VPS-220-E5 Power Supply FM Approved Style E

Vesda Xtralis VPS-220-E5 Power Supply FM Approved Style EXtralis Power Supply Units are uniquely designed to complement the style and appearance of Xtralis aspirating smoke detectors ASDs and are technically matched to provide sufficient current and battery charging capacity to meet the requirements of EN 54-4.The Style E variants are VdS certified and CE marked to the EN54-4 so are particularly suitable for use in territories where these approvals are required.This is the original unit within the range. Designed with the same footprint as the VESDA-E VEP VES and VEU detectors this power supply will not look out of place powering these detectors.Internally is an EN54-4 certified Power Supply rated to provide a 0.5A continuous 24Vdc supply while also charging the batteries not supplied which can be a 7 12 or uniquely 14Ah arrangement.As such the unit can be used with confidence to power and provide 24hr standby plus 0.5hr in alarm for the VESDA VLF-500 VESDA-E VEP VESDA-E VES detectors and also the VESDA-E VEU detectors up to fan speed 5.With regard to installation cable entry knockouts line up with those on the VESDA-E detectors allowing for convenient positioning of the power supply directly adjacent to the detector.The front cover is fitted with 2 LEDs giving a quick visual indication of OK andor fault conditionThere is also an internal status LED to aid fault diagnosis.The unit also provides a non-certified setting which enables it to power loads up to 1A while recharging batteries up to 12Ah in accordance with EN 54-4.

GBP 295.68
1

Vesda-E VEU VEU-A10 4-Pipe Smoke Detector with 3.5quot Touchscreen Display

Vesda-E VEU VEU-A10 4-Pipe Smoke Detector with 3.5quot Touchscreen Display

Vesda-E VEU VEU-A10 4-Pipe Smoke Detector with 3.5 Touchscreen DisplayThe VEU series of aspirating smoke detectors are the premium detector of the VESDA-E range. An Ultra-wide sensitivity range 15 times greater than VESDA VLP and provision for more sampling holes provide an increased coverage in high airflow applications by up to 40.Considerably longer linear pipe runs and extended branched pipe network configurations cater perfectly to applications with higher ceilings providing an increased coverage by up to 80 whilst allowing convenient detector mounting for ease of service and maintenance. A range of revolutionary new features provide unsurpassed detection performance flexibility field programmability connectivity and reduced total cost of ownership.VEU features a robust IP40-rated enclosure and is equipped with a powerful aspirator that provides a total pipe length of 800 m 2624 ft. It is fully supported by the ASPIRE-E and Xtralis VSC software applications which facilitate ease of pipe network design system commissioning and maintenance together with compatibility with existing VESDA installations.Key FeaturesShort wavelength laser based detectionInherent absolute calibrationAdvanced Imaging technology equivalentto thousands of sensorsClean air barrier for optics protectionMost robust contamination resistanceUltra-wide sensitivity rangeFlow fault thresholds configurable per portLong-life easy-to-replace filterQuiet operationLEDs for alarm and fault signalling3.5 colour touch screen for status reviewAdvanced remote diagnosticsArea coverage up to 6500m 69960ftUp to four inlet pipesTotal pipe length of 800m 2624ftSeven programmable relaysTwo GPIs monitored and unmonitoredUltrasonic flow sensingXtralis VSC VSM4 and ASPIRE-E PC software supportIP 40 enclosure not UL testedEasy mounting with optional steel supportbracketField replaceable aspirator sampling module filter anddetection chamberVESDAnet networkingEthernet 100 base TWiFi 802.11 bgnLocal host-mode USB portEasy cable termination accessEvent Log 20000 events

GBP 4616.03
1

Vesda VRT-100 Remote Mount Programmer

Vesda VRT-100 Remote Mount Programmer

Vesda VRT-100 Remote Mount ProgrammerThe Programmer Module allows direct access to all VESDAnet devices on an VESDA smoke detection system. It allows configuration and status reporting of detectors displays and interfaces and is required when installing commissioning and maintaining a VESDA network. By incorporating a user friendly menu navigation through the comprehensive features of VESDAnet is convenient and simple.The programmer module is available as a hand-held device with included DB15 serial cable or can be mounted into a VESDA VLP or VESDA VLS detector a remote mounting box or a 19 inch sub rack. The two rows of large push buttons enable the user to log ON and navigate through the menu trees to the various command and parameter setting functions. The top row of keys are called Soft Keys and are assigned programming options appropriate to the screen being viewed.Some of the parameters that can be accessed via the programmer include device status reporting zone number and name allocation flow normalisation alarm threshold setting day night weekend initiation of AutoLearn wiring order relay testing and event log review. Up to 14 assigned Users or Administrators with an individual 4 digit Personal Identification Number PIN and one Distributor can log onto a VESDAnet system under one of three levels of access which are password protectedUser USR is only able to view parameters check status alarms and reset the system.Administrator ADM has access to most commands and programming parameters.Distributor DST is the topmost level and has unlimited access to all commands and parameters in the system.Lost PIN numbers can be overcome by obtaining a once only pass number from your Xtralis VESDA dealer.The programmer automatically logs OFF when not in use for more than 10 minutes. The user is prompted with a beeping sound at 1 minute and at 15 seconds before log OFF. Any key may be pressed to cancel the automatic log OFF process.Key FeaturesUser friendly menu systemSupports multiple languagesSingle point access to entire VESDAnet systemAlarm and fault simulationShows wiring orderLocates communications failuresPassword securityHand held or remote mountingAutomatic Logoff when inactiveBacklit LCD screen

GBP 955.28
1

Vesda VHH-100 Hand Held Programmer Complete with Lead

Vesda VHH-100 Hand Held Programmer Complete with Lead

Vesda VHH-100 Hand Held Programmer Complete with LeadThe Programmer Module allows direct access to all VESDAnet devices on an VESDA smoke detection system. It allows configuration and status reporting of detectors displays and interfaces and is required when installing commissioning and maintaining a VESDA network. By incorporating a user friendly menu navigation through the comprehensive features of VESDAnet is convenient and simple.The programmer module is available as a hand-held device with included DB15 serial cable or can be mounted into a VESDA VLP or VESDA VLS detector a remote mounting box or a 19 inch sub rack.The two rows of large push buttons enable the user to log ON and navigate through the menu trees to the various command and parameter setting functions. The top row of keys are called Soft Keys and are assigned programming options appropriate to the screen being viewed.Some of the parameters that can be accessed via the programmer include device status reporting zone number and name allocation flow normalisation alarm threshold setting day night weekend initiation of AutoLearn wiring order relay testing and event log review.Up to 14 assigned Users or Administrators with an individual 4 digit Personal Identification Number PIN and one Distributor can log onto a VESDAnet system under one of three levels of access which are password protectedUser USR is only able to view parameters check status alarms and reset the system.Administrator ADM has access to most commands and programming parameters.Distributor DST is the topmost level and has unlimited access to all commands and parameters in the system.Lost PIN numbers can be overcome by obtaining a once only pass number from your Xtralis VESDA dealer.The programmer automatically logs OFF when not in use for more than 10 minutes. The user is prompted with a beeping sound at 1 minute and at 15 seconds before log OFF. Any key may be pressed to cancel the automatic log OFF process.Key FeaturesUser friendly menu systemSupports multiple languagesSingle point access to entire VESDAnet systemAlarm and fault simulationShows wiring orderLocates communications failuresPassword securityHand held or remote mountingAutomatic Logoff when inactiveBacklit LCD screen

GBP 919.70
1

Vesda Xtralis VLI-885 LaserINDUSTRIAL Detector with Relays VESDAnet and Ethernet

Vesda Xtralis VLI-885 LaserINDUSTRIAL Detector with Relays VESDAnet and Ethernet

Vesda Xtralis VLI-885 LaserINDUSTRIAL Detector with Relays VESDAnet and EthernetThe VESDA VLI by Xtralis is an industry first early warning aspirating smoke detection ASD system designed to protect industrial applications and harsh environments of up to 2000m2 20000 sq. ft..The VLI detector combines a fail-safe Intelligent Filter patent pending with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.The Intelligent Filtereffectively reduces the level of pollution in the air sample before it enters the detection chamber which dramatically extends the operational life of the detector in harsh and polluted environments.is fully monitored therefore providing consistent sensitivity over the entire operational life of the detector.The VLI detector features a robust IP54-rated enclosure which provides protection against dust ingress and water splash. In the majority of applications this eliminates the need to use expensive external IP enclosures thus simplifying and reducing the cost of installation. The VLI detector is equipped with a powerful aspirator that provides a total pipe length of 360m 1200 ft. It is fully supported by the Xtralis ASPIRE2 VSC and VSM4 software applications which facilitate ease of pipe network design system commissioning and maintenance together with compatibility with existing VESDA installations.The AutoLearn commissioning assistant reduces setup time and ensures optimum alarm and flow thresholds in a range of environments. The VLI detector features a standardised industry BACnet over Ethernet communication protocol for remote monitoring and programming and connection to building management systems BMS and automation devices. This translates to direct cost savings on integration and monitoring. The VLI detector is inherently less prone to nuisance alarms due to the intelligent filter lint trap sub-sampling probe and secondary filter. Coupled with its modular design VLI offers a lower total cost of ownership over the life of the product.Key FeaturesSuitable for Class 1 Division 2 applications - Groups ABC DUp to 2000m2 20000 sq. ft. coverageUp to 4 inlet pipesTotal pipe length up to 360m 1200 ftFive 5 high intensity status LEDs for greater visibilityRobust absolute smoke detectionIntelligent Filter patent pendingLint Trap to capture fibrous particulatesSub-sampling Probe inertial separatorSecondary FilterClean air barrier for optics protectionReferencingAutoLearn Smoke and FlowClean Air ZeroAir-path monitoringFive 5 relays Fire Fault and 3 configurableRelays configurable as latching or nonlatchingExpandable GPI and relaysUltrasonic flow sensingXtralis VSC Xtralis VSM4 and ASPIRE2 software supportIP54 EnclosureEasy mounting through steel support bracketModular field replaceable parts for ease of servicingBACnet over EthernetLocal USB configuration portEasy cable termination accessImperial and metric pipe portsRubberized finish to external housing

GBP 6726.62
1

Vesda Xtralis VLI-880 LaserINDUSTRIAL Detector with Relays amp Ethernet Only

Vesda Xtralis VLI-880 LaserINDUSTRIAL Detector with Relays amp Ethernet Only

Vesda Xtralis VLI-880 LaserINDUSTRIAL Detector with Relays Ethernet OnlyThe VESDA VLI by Xtralis is an industry first early warning aspirating smoke detection ASD system designed to protect heavy industrial applications with dirty or harsh environments of up to 2000m2 20000 sq. ft..Until now ASD has not been recommended in challenging dirty environments however the new Vesda VLI removes any previous boundaries enabling the facility of very early smoke detection in almost any conditions.The VLI detector combines a fail-safe Intelligent Filter patent pending with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.The Intelligent Filtereffectively reduces the level of pollution in the air sample before it enters the detection chamber which dramatically extends the operational life of the detector in harsh and polluted environments.is fully monitored therefore providing consistent sensitivity over the entire operational life of the detector.The VLI detector features a robust IP54-rated enclosure which provides protection against dust ingress and water splash. In the majority of applications this eliminates the need to use expensive external IP enclosures thus simplifying and reducing the cost of installation. The VLI detector is equipped with a powerful aspirator that provides a total pipe length of 360m 1200 ft. It is fully supported by the Xtralis ASPIRE2 VSC and VSM4 software applications which facilitate ease of pipe network design system commissioning and maintenance together with compatibility with existing VESDA installations.The AutoLearn commissioning assistant reduces setup time and ensures optimum alarm and flow thresholds in a range of environments. The VLI detector features a standardised industry BACnet over Ethernet communication protocol for remote monitoring and programming and connection to building management systems BMS and automation devices. This translates to direct cost savings on integration and monitoring. The VLI detector is inherently less prone to nuisance alarms due to the intelligent filter lint trap sub-sampling probe and secondary filter. Coupled with its modular design VLI offers a lower total cost of ownership over the life of the product.Key FeaturesSuitable for Class 1 Division 2 applications - Groups ABC DUp to 2000m2 20000 sq. ft. coverageUp to 4 inlet pipesTotal pipe length up to 360m 1200 ftFive 5 high intensity status LEDs for greater visibilityRobust absolute smoke detectionIntelligent Filter patent pendingLint Trap to capture fibrous particulatesSub-sampling Probe inertial separatorSecondary FilterClean air barrier for optics protectionReferencingAutoLearn Smoke and FlowClean Air ZeroAir-path monitoringFive 5 relays Fire Fault and 3 configurableRelays configurable as latching or nonlatchingExpandable GPI and relaysUltrasonic flow sensingXtralis VSC Xtralis VSM4 and ASPIRE2 software supportIP54 EnclosureEasy mounting through steel support bracketModular field replaceable parts for ease of servicingBACnet over EthernetLocal USB configuration portEasy cable termination accessImperial and metric pipe portsRubberized finish to external housing

GBP 6190.67
1