24 results (0,26593 seconds)

Show all filters

Brand

Colour

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Thern Europe BV Manual Wire Rope Winch with Worm Gears Max. Lifting Load 900 Kg Steel Cast Aluminium

Thern Europe BV Manual Wire Rope Winch with Worm Gears Max. Lifting Load 900 Kg Steel Cast Aluminium

Manual wire rope winch with worm gears, max. lifting load 900 kg, steel, cast aluminium. Supplied = pre-assembled, final assembly by customer. Wire rope length = 13.7 m. Wire rope diameter = 6.4 mm. Lifting capacity = 900 kg. Material = steel, cast aluminium. Finish = powder coated. Product type = cable winches. Lift drive = worm gear transmission. Complete set consisting of a hand winch with rope and safety swivel hook. Drill drive with max. 400 rpm and 1-1/8'' hexagonal socket, e.g. for rechargeable drill. CE marking. Wire rope length 13.7 m and other lengths available on request. High quality workmanship and robust. The manual wire rope winch with worm gear transmission and internal brake is a reliable solution for lifting and pulling loads, and is characterised by its high quality workmanship and robustness. With a lifting capacity of 900 kg in the first position, loads can be moved safely and easily. You will receive a practical set consisting of a manual wire rope winch with worm gear transmission, including a zinc plated cable with safety swivel hook. The wire rope has a diameter of 6.4 mm and a length of 13.7 metres. Customised wire rope lengths are also available upon request for special requirements. The gear ratio is 14.7:1 and the input shaft come with a drill drive with a maximum of 400 rpm and 1-1/8'' hexagonal socket. This makes your work easier, for example by using a rechargeable drill, and increases the range of potential applications. The CE marking confirms compliance with the highest safety standards. The fully encased gear transmission offers a long service life and trouble free use. The robust steel frame with red primer provides additional durability and stability. The reduction gear and drum made of cast aluminium with a red powder coating prevent corrosion and increase durability. Fastening and mounting materials and the drill drive are not included in the scope of delivery. Other models and wire rope lengths available upon request.

GBP 4199.99
1

Thern Europe BV Manual Wire Rope Winch with Spur Gear Transmission Max. Lifting Load 900 Kg Stainless Steel

Thern Europe BV Manual Wire Rope Winch with Spur Gear Transmission Max. Lifting Load 900 Kg Stainless Steel

Manual wire rope winch with spur gear transmission, max. lifting load 900 kg, stainless steel. Supplied = pre-assembled, final assembly by customer. Wire rope length = 13.7 m. Wire rope diameter = 6.4 mm. Lifting capacity = 900 kg. Material = stainless steel. Finish = stainless steel. Product type = cable winches. Lift drive = spur gear transmission. Complete set consisting of a hand winch with rope and safety swivel hook. Wire rope length 13.7 m and other lengths available on request. CE marking. Cable winch available as models with two different materials. High quality workmanship and durable. The manual wire rope winch with spur gear transmission and automatic brake makes lifting and pulling loads easy, and is characterised by its high quality workmanship and stability. With two different models of wire rope winch with a lifting capacity of up to 450 kg or 900 kg in the first position in combination with a zinc plated or stainless steel model, you will find the right product for your specific needs. The spur gear transmission allows the winch to be rolled up and down smoothly to move heavy objects. You will receive a practical set consisting of a manual wire rope winch with spur gear transmission, including a wire rope with safety swivel hook. The rope has a diameter of 6.4 mm and a length of 13.7 metres. The CE marking on the wire rope winch confirms compliance with the highest safety standards. Choose the wire rope winch that suits you best from the two models available for a long lasting product suitable for versatile use. The entry level product with machine cut gear wheels made of solid steel is impressively robust. The winch, wire rope and safety swivel hook are zinc plated and offer a corrosion protected surface. The second option, which is made of stainless steel, makes an impression with its high quality workmanship and durability, as the winch, gears, wire rope and safety swivel hooks are made of stainless steel. The gears also feature corrosion protection. The wire rope meets the quality standard 304, the safety swivel hook 316. Fastening and mounting material not included in the scope of delivery.

GBP 6199.99
1

Thern Europe BV Manual Wire Rope Winch with Spur Gear Transmission Max. Lifting Load 450 Kg Stainless Steel

Thern Europe BV Manual Wire Rope Winch with Spur Gear Transmission Max. Lifting Load 450 Kg Stainless Steel

Manual wire rope winch with spur gear transmission, max. lifting load 450 kg, stainless steel. Supplied = pre-assembled, final assembly by customer. Wire rope length = 13.7 m. Wire rope diameter = 4.8 mm. Lifting capacity = 450 kg. Material = stainless steel. Finish = stainless steel. Product type = cable winches. Lift drive = spur gear transmission. Complete set consisting of a hand winch with rope and safety swivel hook. Wire rope length 13.7 m and other lengths available on request. CE marking. Cable winch available as models with two different materials. High quality workmanship and durable. The manual wire rope winch with spur gear transmission and automatic brake makes lifting and pulling loads easy, and is characterised by its high quality workmanship and robustness. With two different models of wire rope winch with a lifting capacity of up to 450 kg or 900 kg in the first position in combination with a zinc plated or stainless steel model, you will find the right product for your specific needs. The spur gear transmission allows the winch to be rolled up and down smoothly to move heavy objects. You will receive a practical set consisting of a manual wire rope winch with spur gear transmission, including a zinc plated wire rope with safety swivel hook. The rope has a diameter of 4.8 mm and a length of 13.7 metres. The CE marking confirms compliance with the highest safety standards. Choose the wire rope winch that suits you best from the two models available for a long lasting product suitable for versatile use. The entry level product with machine cut gear wheels made of solid steel is impressively robust. The winch, wire rope and safety swivel hook are zinc plated and offer a corrosion protected surface. The second option, which is made of stainless steel, makes an impression with its high quality workmanship and durability, as the winch, gears, wire rope and safety swivel hooks are made of stainless steel. The gears also feature corrosion protection. The wire rope meets the quality standard 304, the safety swivel hook 316. Fastening and mounting material not included in the scope of delivery.

GBP 3999.99
1

Thern Europe BV Manual Wire Rope Winch with Spur Gear Transmission Max. Lifting Load 900 Kg Steel Electrolytically Zinc Plated

Thern Europe BV Manual Wire Rope Winch with Spur Gear Transmission Max. Lifting Load 900 Kg Steel Electrolytically Zinc Plated

Manual wire rope winch with spur gear transmission, max. lifting load 900 kg, steel, electrolytically zinc plated. Supplied = pre-assembled, final assembly by customer. Wire rope length = 13.7 m. Wire rope diameter = 6.4 mm. Lifting capacity = 900 kg. Material = steel. Finish = zinc plated by galvanization. Product type = cable winches. Lift drive = spur gear transmission. Complete set consisting of a hand winch with rope and safety swivel hook. Wire rope length 13.7 m and other lengths available on request. CE marking. Cable winch available as models with two different materials. High quality workmanship and durable. The manual wire rope winch with spur gear transmission and automatic brake makes lifting and pulling loads easy, and is characterised by its high quality workmanship and stability. With two different models of wire rope winch with a lifting capacity of up to 450 kg or 900 kg in the first position in combination with a zinc plated or stainless steel model, you will find the right product for your specific needs. The spur gear transmission allows the winch to be rolled up and down smoothly to move heavy objects. You will receive a practical set consisting of a manual wire rope winch with spur gear transmission, including a wire rope with safety swivel hook. The rope has a diameter of 6.4 mm and a length of 13.7 metres. The CE marking on the wire rope winch confirms compliance with the highest safety standards. Choose the wire rope winch that suits you best from the two models available for a long lasting product suitable for versatile use. The entry level product with machine cut gear wheels made of solid steel is impressively robust. The winch, wire rope and safety swivel hook are zinc plated and offer a corrosion protected surface. The second option, which is made of stainless steel, makes an impression with its high quality workmanship and durability, as the winch, gears, wire rope and safety swivel hooks are made of stainless steel. The gears also feature corrosion protection. The wire rope meets the quality standard 304, the safety swivel hook 316. Fastening and mounting material not included in the scope of delivery.

GBP 2999.99
1

Thern Europe BV Manual Wire Rope Winch with Spur Gear Transmission Max. Lifting Load 450 Kg Steel Electrolytically Zinc Plated

Thern Europe BV Manual Wire Rope Winch with Spur Gear Transmission Max. Lifting Load 450 Kg Steel Electrolytically Zinc Plated

Manual wire rope winch with spur gear transmission, max. lifting load 450 kg, steel, electrolytically zinc plated. Supplied = pre-assembled, final assembly by customer. Wire rope length = 13.7 m. Wire rope diameter = 4.8 mm. Lifting capacity = 450 kg. Material = steel. Finish = zinc plated by galvanization. Product type = cable winches. Lift drive = spur gear transmission. Complete set consisting of a hand winch with rope and safety swivel hook. Wire rope length 13.7 m and other lengths available on request. CE marking. Cable winch available as models with two different materials. High quality workmanship and durable. The manual wire rope winch with spur gear transmission and automatic brake makes lifting and pulling loads easy, and is characterised by its high quality workmanship and robustness. With two different models of wire rope winch with a lifting capacity of up to 450 kg or 900 kg in the first position in combination with a zinc plated or stainless steel model, you will find the right product for your specific needs. The spur gear transmission allows the winch to be rolled up and down smoothly to move heavy objects. You will receive a practical set consisting of a manual wire rope winch with spur gear transmission, including a zinc plated wire rope with safety swivel hook. The rope has a diameter of 4.8 mm and a length of 13.7 metres. The CE marking confirms compliance with the highest safety standards. Choose the wire rope winch that suits you best from the two models available for a long lasting product suitable for versatile use. The entry level product with machine cut gear wheels made of solid steel is impressively robust. The winch, wire rope and safety swivel hook are zinc plated and offer a corrosion protected surface. The second option, which is made of stainless steel, makes an impression with its high quality workmanship and durability, as the winch, gears, wire rope and safety swivel hooks are made of stainless steel. The gears also feature corrosion protection. The wire rope meets the quality standard 304, the safety swivel hook 316. Fastening and mounting material not included in the scope of delivery.

GBP 1799.99
1

Thern Europe BV First Mate Portable Davit Crane Stainless Steel Max. Load 385 kg

Thern Europe BV First Mate Portable Davit Crane Stainless Steel Max. Load 385 kg

First Mate portable davit crane, stainless steel, max. load 385 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 609 mm - 385 kg. Max. load 2 (at jib length mm) = 889 mm - 272 kg. Max. load 3 (at jib length mm) = 1066 mm - 225 kg. Overall width = 1066 mm. Overall height = 1778 mm. Overall length = 1066 mm. Lifting height max. cantilever arm extended = 1778 mm. Max. crane arm length = 1066 mm. Min. crane arm length = 609 mm. Finish = stainless steel. Complete crane set, stainless steel, with manual wire rope winch, base mount and steel rope with load hook. Ideally suited for changing locations. Swivels 360. Fixed crane arm length, adjustable crane arm angle for three different operating positions, folds together for transport and storage. Virtually unlimited areas of use. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: stainless steel crane, stainless steel manual wire rope winch with spur gear transmission, stainless steel base mount platform (without set of bolts for mounting, see Accessories) , stainless steel rope with load hook, 4.8 mm, length 13.7 m.

GBP 7199.99
1

Thern Europe BV Commander 500 Portable Davit Crane Stainless Steel Max. Load 300 kg

Thern Europe BV Commander 500 Portable Davit Crane Stainless Steel Max. Load 300 kg

Commander 500 portable davit crane, stainless steel, max. load 300 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 584 mm - 300 kg. Max. load 2 (at jib length mm) = 762 mm - 235 kg. Max. load 3 (at jib length mm) = 940 mm - 190 kg. Max. load 4 (at jib length mm) = 1117 mm - 160 kg. Overall width = 1676 mm. Overall height = 2159 mm. Overall length = 1676 mm. Lifting height max. cantilever arm extended = 2159 mm. Max. crane arm length = 1676 mm. Min. crane arm length = 584 mm. Finish = stainless steel. Complete crane set, stainless steel, with manual wire rope winch, base mount and steel rope with load hook. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle by means of a ratchet tensioner. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: stainless steel crane, stainless steel manual wire rope winch with spur gear transmission, stainless steel base mount platform (without set of bolts for mounting, see Accessories) , stainless steel rope with load hook, 4.8 mm, length 13.7 m.

GBP 11399.99
1

Thern Europe BV Commander 500 Portable Davit Crane Electrolytically Zinc Plated Max. Load 300 kg

Thern Europe BV Commander 500 Portable Davit Crane Electrolytically Zinc Plated Max. Load 300 kg

Commander 500 portable davit crane, electrolytically zinc plated, max. load 300 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 584 mm - 300 kg. Max. load 2 (at jib length mm) = 762 mm - 235 kg. Max. load 3 (at jib length mm) = 940 mm - 190 kg. Max. load 4 (at jib length mm) = 1117 mm - 160 kg. Overall width = 1676 mm. Overall height = 2159 mm. Overall length = 1676 mm. Lifting height max. cantilever arm extended = 2159 mm. Max. crane arm length = 1676 mm. Min. crane arm length = 584 mm. Finish = zinc plated by galvanization. Complete crane set, electrolytically zinc plated, with manual wire rope winch, base mount and steel rope with load hook. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle by means of a ratchet tensioner. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: electrolytically zinc plated crane, zinc plated manual wire rope winch with spur gear transmission, zinc plated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 4.8 mm, length 13.7 m.

GBP 7299.99
1

Thern Europe BV First Mate Portable Davit Crane Electrolytically Zinc Plated Max. Load 385 kg

Thern Europe BV First Mate Portable Davit Crane Electrolytically Zinc Plated Max. Load 385 kg

First Mate portable davit crane, electrolytically zinc plated, max. load 385 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 609 mm - 385 kg. Max. load 2 (at jib length mm) = 889 mm - 272 kg. Max. load 3 (at jib length mm) = 1066 mm - 225 kg. Overall width = 1066 mm. Overall height = 1778 mm. Overall length = 1066 mm. Lifting height max. cantilever arm extended = 1778 mm. Max. crane arm length = 1066 mm. Min. crane arm length = 609 mm. Finish = zinc plated by galvanization. Complete crane set, electrolytically zinc plated, with manual wire rope winch, base mount and steel rope with load hook. Ideally suited for changing locations. Swivels 360. Fixed crane arm length, adjustable crane arm angle for three different operating positions, folds together for transport and storage. Virtually unlimited areas of use. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: electrolytically zinc plated crane, zinc plated manual wire rope winch with spur gear transmission, zinc plated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 4.8 mm, length 13.7 m.

GBP 4699.99
1

Thern Europe BV First Mate Portable Davit Crane Powder Coated Max. Load 385 kg

Thern Europe BV First Mate Portable Davit Crane Powder Coated Max. Load 385 kg

First Mate portable davit crane, powder coated, max. load 385 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 609 mm - 385 kg. Max. load 2 (at jib length mm) = 889 mm - 272 kg. Max. load 3 (at jib length mm) = 1066 mm - 225 kg. Overall width = 1066 mm. Overall height = 1778 mm. Overall length = 1066 mm. Lifting height max. cantilever arm extended = 1778 mm. Max. crane arm length = 1066 mm. Min. crane arm length = 609 mm. Finish = powder coated. Complete crane set, powder coated, with manual wire rope winch, base mount and steel rope with load hook. Ideally suited for changing locations. Swivels 360. Fixed crane arm length, adjustable crane arm angle for three different operating positions, folds together for transport and storage. Virtually unlimited areas of use. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: crane powder coated in the colour red, manual wire rope winch with zinc plated spur gear transmission, powder coated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 4.8 mm, length 13.7 m.

GBP 4199.99
1

Thern Europe BV Commander 500 Portable Davit Crane Powder Coated Max. Load 300 kg

Thern Europe BV Commander 500 Portable Davit Crane Powder Coated Max. Load 300 kg

Commander 500 portable davit crane, powder coated, max. load 300 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 584 mm - 300 kg. Max. load 2 (at jib length mm) = 762 mm - 235 kg. Max. load 3 (at jib length mm) = 940 mm - 190 kg. Max. load 4 (at jib length mm) = 1117 mm - 160 kg. Overall width = 1676 mm. Overall height = 2159 mm. Overall length = 1676 mm. Lifting height max. cantilever arm extended = 2159 mm. Max. crane arm length = 1676 mm. Min. crane arm length = 584 mm. Finish = powder coated. Complete crane set, powder coated, with manual wire rope winch, base mount and steel rope with load hook. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle by means of a ratchet tensioner. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: crane powder coated in the colour red, manual wire rope winch with zinc plated spur gear transmission, powder coated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 4.8 mm, length 13.7 m.

GBP 5999.99
1

Thern Europe BV Ensign 1000 Portable Davit Crane Electrolytically Zinc Plated Max. Load 544 kg

Thern Europe BV Ensign 1000 Portable Davit Crane Electrolytically Zinc Plated Max. Load 544 kg

Ensign 1000 portable davit crane, electrolytically zinc plated, max. load 544 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 558 mm - 544 kg. Max. load 2 (at jib length mm) = 660 mm - 453 kg. Max. load 3 (at jib length mm) = 812 mm - 362 kg. Max. load 4 (at jib length mm) = 990 mm - 294 kg. Overall width = 1219 mm. Overall height = 3048 mm. Overall length = 1219 mm. Lifting height max. cantilever arm extended = 3048 mm. Max. crane arm length = 1219 mm. Min. crane arm length = 558 mm. Finish = zinc plated by galvanization. Max. load 1 (at position mm) = 660 mm - 544 kg. Max. load 2 (at position mm) = 812 mm - 453 kg. Complete crane set, electrolytically zinc plated, with manual wire rope winch, base mount and steel rope with load hook. Swivels 360. Fixed crane arm length with 4 easily adjustable operating positions for the return pulley unit. Adjustable crane arm angle. Stainless steel adjustment screw, with convenient knob, ensures easy adjustment of the crane arm angle. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: electrolytically zinc plated crane, zinc plated manual wire rope winch with spur gear transmission, zinc plated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 6.4 mm, length 13.7 m.

GBP 10999.99
1

Thern Europe BV Ensign 1000 Portable Davit Crane Stainless Steel Max. Load 544 kg

Thern Europe BV Ensign 1000 Portable Davit Crane Stainless Steel Max. Load 544 kg

Ensign 1000 portable davit crane, stainless steel, max. load 544 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 558 mm - 544 kg. Max. load 2 (at jib length mm) = 660 mm - 453 kg. Max. load 3 (at jib length mm) = 812 mm - 362 kg. Max. load 4 (at jib length mm) = 990 mm - 294 kg. Overall width = 1219 mm. Overall height = 3048 mm. Overall length = 1219 mm. Lifting height max. cantilever arm extended = 3048 mm. Max. crane arm length = 1219 mm. Min. crane arm length = 558 mm. Finish = stainless steel. Max. load 1 (at position mm) = 660 mm - 544 kg. Max. load 2 (at position mm) = 812 mm - 453 kg. Complete crane set, stainless steel, with manual wire rope winch, base mount and steel rope with load hook. Swivels 360. Fixed crane arm length with 4 easily adjustable operating positions for the return pulley unit. Adjustable crane arm angle. Stainless steel adjustment screw, with convenient knob, ensures easy adjustment of the crane arm angle. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: stainless steel crane, stainless steel manual wire rope winch with spur gear transmission, stainless steel base mount platform (without set of bolts for mounting, see Accessories) , stainless steel rope with load hook, 6.4 mm, length 13.7 m.

GBP 16999.99
1

Thern Europe BV Ensign 500 Portable Davit Crane Stainless Steel Max. Load 227 kg

Thern Europe BV Ensign 500 Portable Davit Crane Stainless Steel Max. Load 227 kg

Ensign 500 portable davit crane, stainless steel, max. load 227 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 355 mm - 227 kg. Max. load 2 (at jib length mm) = 431 mm - 181 kg. Max. load 3 (at jib length mm) = 558 mm - 136 kg. Max. load 4 (at jib length mm) = 711 mm - 113 kg. Overall width = 914 mm. Overall height = 2565 mm. Overall length = 914 mm. Lifting height max. cantilever arm extended = 2565 mm. Max. crane arm length = 914 mm. Min. crane arm length = 355 mm. Finish = stainless steel. Max. load 1 (at position mm) = 431 mm - 225 kg. Max. load 2 (at position mm) = 558 mm - 181 kg. Complete crane set, stainless steel, with manual wire rope winch, base mount and steel rope with load hook. Extremely lightweight crane, suitable for handling higher objects due to addition hook height. Swivels 360. Fixed crane arm length with 4 easily adjustable operating positions for the return pulley unit. Adjustable crane arm angle. Stainless steel adjustment screw, with convenient knob, ensures easy adjustment of the crane arm angle. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: stainless steel crane, stainless steel manual wire rope winch with spur gear transmission, stainless steel base mount platform (without set of bolts for mounting, see Accessories) , stainless steel rope with load hook, 4.8 mm, length 13.7 m.

GBP 10999.99
1

Thern Europe BV Ensign 1000 Portable Davit Crane Powder Coated Max. Load 544 kg

Thern Europe BV Ensign 1000 Portable Davit Crane Powder Coated Max. Load 544 kg

Ensign 1000 portable davit crane, powder coated, max. load 544 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 558 mm - 544 kg. Max. load 2 (at jib length mm) = 660 mm - 453 kg. Max. load 3 (at jib length mm) = 812 mm - 362 kg. Max. load 4 (at jib length mm) = 990 mm - 294 kg. Overall width = 1219 mm. Overall height = 3048 mm. Overall length = 1219 mm. Lifting height max. cantilever arm extended = 3048 mm. Max. crane arm length = 1219 mm. Min. crane arm length = 558 mm. Finish = powder coated. Max. load 1 (at position mm) = 660 mm - 544 kg. Max. load 2 (at position mm) = 812 mm - 453 kg. Complete crane set, powder coated, with manual wire rope winch, base mount and steel rope with load hook. Swivels 360. Fixed crane arm length with 4 easily adjustable operating positions for the return pulley unit. Adjustable crane arm angle. Stainless steel adjustment screw, with convenient knob, ensures easy adjustment of the crane arm angle. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: crane powder coated in the colour red, manual wire rope winch with zinc plated spur gear transmission, powder coated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 6.4 mm, length 13.7 m.

GBP 8999.99
1

Thern Europe BV Ensign 500 Portable Davit Crane Electrolytically Zinc Plated Max. Load 227 kg

Thern Europe BV Ensign 500 Portable Davit Crane Electrolytically Zinc Plated Max. Load 227 kg

Ensign 500 portable davit crane, electrolytically zinc plated, max. load 227 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 355 mm - 227 kg. Max. load 2 (at jib length mm) = 431 mm - 181 kg. Max. load 3 (at jib length mm) = 558 mm - 136 kg. Max. load 4 (at jib length mm) = 711 mm - 113 kg. Overall width = 914 mm. Overall height = 2565 mm. Overall length = 914 mm. Lifting height max. cantilever arm extended = 2565 mm. Max. crane arm length = 914 mm. Min. crane arm length = 355 mm. Finish = zinc plated by galvanization. Max. load 1 (at position mm) = 431 mm - 225 kg. Max. load 2 (at position mm) = 558 mm - 181 kg. Complete crane set, electrolytically zinc plated, with manual wire rope winch, base mount and steel rope with load hook. Extremely lightweight crane, suitable for handling higher objects due to addition hook height. Swivels 360. Fixed crane arm length with 4 easily adjustable operating positions for the return pulley unit. Adjustable crane arm angle. Stainless steel adjustment screw, with convenient knob, ensures easy adjustment of the crane arm angle. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: electrolytically zinc plated crane, zinc plated manual wire rope winch with spur gear transmission, zinc plated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 4.8 mm, length 13.7 m.

GBP 6999.99
1

Thern Europe BV Ensign 500 Portable Davit Crane Powder Coated Max. Load 227 kg

Thern Europe BV Ensign 500 Portable Davit Crane Powder Coated Max. Load 227 kg

Ensign 500 portable davit crane, powder coated, max. load 227 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 355 mm - 227 kg. Max. load 2 (at jib length mm) = 431 mm - 181 kg. Max. load 3 (at jib length mm) = 558 mm - 136 kg. Max. load 4 (at jib length mm) = 711 mm - 113 kg. Overall width = 914 mm. Overall height = 2565 mm. Overall length = 914 mm. Lifting height max. cantilever arm extended = 2565 mm. Max. crane arm length = 914 mm. Min. crane arm length = 355 mm. Finish = powder coated. Max. load 1 (at position mm) = 431 mm - 225 kg. Max. load 2 (at position mm) = 558 mm - 181 kg. Complete crane set, powder coated, with manual wire rope winch, base mount and steel rope with load hook. Extremely lightweight crane, suitable for handling higher objects due to addition hook height. Swivels 360. Fixed crane arm length with 4 easily adjustable operating positions for the return pulley unit. Adjustable crane arm angle. Stainless steel adjustment screw, with convenient knob, ensures easy adjustment of the crane arm angle. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: crane powder coated in the colour red, manual wire rope winch with zinc plated spur gear transmission, powder coated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 4.8 mm, length 13.7 m.

GBP 5299.99
1

Thern Europe BV Capitan 2500 Stationary Davit Crane Stationary Max. Load 1270 kg

Thern Europe BV Capitan 2500 Stationary Davit Crane Stationary Max. Load 1270 kg

Capitan 2500 stationary davit crane, stationary, max. load 1270 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 1346 mm - 1270 kg kg. Max. load 2 (at jib length mm) = 1625 mm - 1180 kg kg. Max. load 3 (at jib length mm) = 1905 mm - 1000 kg kg. Max. load 4 (at jib length mm) = 2209 mm - 860 kg kg. Overall width = 3098 mm. Overall height = 3810 mm. Overall length = 3098 mm. Lifting height max. cantilever arm extended = 3810 mm. Max. crane arm length = 3098 mm. Min. crane arm length = 1346 mm. Finish = painted. Large range. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle adjustable by means of ratchet tensioner. Robust and suitable for stationary use in demanding environments. Supplied complete with: crane with painted base, manual wire rope winch with zinc plated spur gear transmission, stainless steel rope with load hook, 9.5 mm, length 13.5 m. Without a set of bolts for mounting (see Accessories) .

GBP 21999.99
1

Thern Europe BV Commander 1000 Portable Davit Crane Stainless Steel Max. Load 540 kg

Thern Europe BV Commander 1000 Portable Davit Crane Stainless Steel Max. Load 540 kg

Commander 1000 portable davit crane, stainless steel, max. load 540 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 558 mm - 540 kg. Max. load 2 (at jib length mm) = 736 mm - 430 kg. Max. load 3 (at jib length mm) = 914 mm - 340 kg. Max. load 4 (at jib length mm) = 1092 mm - 295 kg. Overall width = 1676 mm. Overall height = 2159 mm. Overall length = 1676 mm. Lifting height max. cantilever arm extended = 2159 mm. Max. crane arm length = 1676 mm. Min. crane arm length = 558 mm. Finish = stainless steel. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle by means of a ratchet tensioner. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: stainless steel crane, stainless steel manual wire rope winch with spur gear transmission, stainless steel base mount platform (without set of bolts for mounting, see Accessories) , stainless steel rope with load hook, 6.4 mm, length 13.7 m.

GBP 14499.99
1

Thern Europe BV Commander 2000 Portable Davit Crane Stainless Steel Max. Load 905 kg

Thern Europe BV Commander 2000 Portable Davit Crane Stainless Steel Max. Load 905 kg

Commander 2000 portable davit crane, stainless steel, max. load 905 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 711 mm - 905 kg. Max. load 2 (at jib length mm) = 914 mm - 860 kg. Max. load 3 (at jib length mm) = 1143 mm - 680 kg. Max. load 4 (at jib length mm) = 1346 mm - 590 kg. Overall width = 2082 mm. Overall height = 2463 mm. Overall length = 2082 mm. Lifting height max. cantilever arm extended = 2463 mm. Max. crane arm length = 2082 mm. Min. crane arm length = 711 mm. Finish = stainless steel. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle by means of a ratchet tensioner. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: stainless steel crane, stainless steel manual wire rope winch with spur gear transmission, stainless steel base mount platform (without set of bolts for mounting, see Accessories) , stainless steel rope with load hook, 6.4 mm, length 13.7 m.

GBP 20999.99
1

Thern Europe BV Commander 2000 Portable Davit Crane Powder Coated Max. Load 905 kg

Thern Europe BV Commander 2000 Portable Davit Crane Powder Coated Max. Load 905 kg

Commander 2000 portable davit crane, powder coated, max. load 905 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 711 mm - 905 kg. Max. load 2 (at jib length mm) = 914 mm - 860 kg. Max. load 3 (at jib length mm) = 1143 mm - 680 kg. Max. load 4 (at jib length mm) = 1346 mm - 590 kg. Overall width = 2082 mm. Overall height = 2463 mm. Overall length = 2082 mm. Lifting height max. cantilever arm extended = 2463 mm. Max. crane arm length = 2082 mm. Min. crane arm length = 711 mm. Finish = powder coated. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle by means of a ratchet tensioner. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: crane powder coated in the colour red, manual wire rope winch with zinc plated spur gear transmission, powder coated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 6.4 mm, length 13.7 m.

GBP 10999.99
1

Thern Europe BV Commander 2000 Portable Davit Crane Electrolytically Zinc Plated Max. Load 905 kg

Thern Europe BV Commander 2000 Portable Davit Crane Electrolytically Zinc Plated Max. Load 905 kg

Commander 2000 portable davit crane, electrolytically zinc plated, max. load 905 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 711 mm - 905 kg. Max. load 2 (at jib length mm) = 914 mm - 860 kg. Max. load 3 (at jib length mm) = 1143 mm - 680 kg. Max. load 4 (at jib length mm) = 1346 mm - 590 kg. Overall width = 2082 mm. Overall height = 2463 mm. Overall length = 2082 mm. Lifting height max. cantilever arm extended = 2463 mm. Max. crane arm length = 2082 mm. Min. crane arm length = 711 mm. Finish = zinc plated by galvanization. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle by means of a ratchet tensioner. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: electrolytically zinc plated crane, zinc plated manual wire rope winch with spur gear transmission, zinc plated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 6.4 mm, length 13.7 m.

GBP 13999.99
1

Thern Europe BV Commander 1000 Portable Davit Crane Powder Coated Max. Load 540 kg

Thern Europe BV Commander 1000 Portable Davit Crane Powder Coated Max. Load 540 kg

Commander 1000 portable davit crane, powder coated, max. load 540 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 558 mm - 540 kg. Max. load 2 (at jib length mm) = 736 mm - 430 kg. Max. load 3 (at jib length mm) = 914 mm - 340 kg. Max. load 4 (at jib length mm) = 1092 mm - 295 kg. Overall width = 1676 mm. Overall height = 2159 mm. Overall length = 1676 mm. Lifting height max. cantilever arm extended = 2159 mm. Max. crane arm length = 1676 mm. Min. crane arm length = 558 mm. Finish = powder coated. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle by means of a ratchet tensioner. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: crane powder coated in the colour red, manual wire rope winch with zinc plated spur gear transmission, powder coated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 6.4 mm, length 13.7 m.

GBP 8199.99
1

Thern Europe BV Commander 1000 Portable Davit Crane Electrolytically Zinc Plated Max. Load 540 kg

Thern Europe BV Commander 1000 Portable Davit Crane Electrolytically Zinc Plated Max. Load 540 kg

Commander 1000 portable davit crane, electrolytically zinc plated, max. load 540 kg. Supplied = pre-assembled, final assembly by customer. Max. load 1 (at jib length mm) = 558 mm - 540 kg. Max. load 2 (at jib length mm) = 736 mm - 430 kg. Max. load 3 (at jib length mm) = 914 mm - 340 kg. Max. load 4 (at jib length mm) = 1092 mm - 295 kg. Overall width = 1676 mm. Overall height = 2159 mm. Overall length = 1676 mm. Lifting height max. cantilever arm extended = 2159 mm. Max. crane arm length = 1676 mm. Min. crane arm length = 558 mm. Finish = zinc plated by galvanization. Swivels 360. Telescopic crane arm with 4 easily adjustable operating positions. Adjustable crane arm angle by means of a ratchet tensioner. Whether on construction sites, roofs of buildings, silos or ships - the areas of use for these cranes is virtually unlimited. Do you need the crane somewhere else? No problem! Its low weight and the innovative snap fastenings allow it to be removed within minutes and be set up somewhere else, and all this without tools. Supplied complete with: electrolytically zinc plated crane, zinc plated manual wire rope winch with spur gear transmission, zinc plated base mount platform (without set of bolts for mounting, see Accessories) , steel rope with load hook, zinc plated rope, 6.4 mm, length 13.7 m.

GBP 9999.99
1