1.602 results (0,19204 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Sandvik Coromant 930-C4-S-20-090A Adapter

Sandvik Coromant 930-C4-S-20-090A Adapter

Product Range: CoroChuck 930Tool Type: Machining centresHigh-precision hydraulic chuck For milling, drilling and reaming operations where precision and high pull-out security is required Available for the most common machine interfacesWith the best pull-out security on the market, this chuck is designed to eliminate vibration for excellent stability and accessibility in all milling and drilling operations. Based on a hydraulic tool clamping system, CoroChuck 930 can be quickly tightened or released with an optimized torque wrench, improving efficiency through quick and easy set-ups and changes. No external equipment is required to clamp or unclamp the system. The chuck holds tolerances within microns to improve tool precision, surface finish and productivity. Precision run-out can be measured at

GBP 419.99
1

Sandvik Coromant 930-C3-S-12-074 Adapter

Sandvik Coromant 930-C3-S-12-074 Adapter

Product Range: CoroChuck 930Tool Type: Machining centresHigh-precision hydraulic chuck For milling, drilling and reaming operations where precision and high pull-out security is required Available for the most common machine interfacesWith the best pull-out security on the market, this chuck is designed to eliminate vibration for excellent stability and accessibility in all milling and drilling operations. Based on a hydraulic tool clamping system, CoroChuck 930 can be quickly tightened or released with an optimized torque wrench, improving efficiency through quick and easy set-ups and changes. No external equipment is required to clamp or unclamp the system. The chuck holds tolerances within microns to improve tool precision, surface finish and productivity. Precision run-out can be measured at

GBP 419.99
1

Sandvik Coromant 930-C4-S-12-080A Adapter

Sandvik Coromant 930-C4-S-12-080A Adapter

Product Range: CoroChuck 930Tool Type: Machining centresHigh-precision hydraulic chuck For milling, drilling and reaming operations where precision and high pull-out security is required Available for the most common machine interfacesWith the best pull-out security on the market, this chuck is designed to eliminate vibration for excellent stability and accessibility in all milling and drilling operations. Based on a hydraulic tool clamping system, CoroChuck 930 can be quickly tightened or released with an optimized torque wrench, improving efficiency through quick and easy set-ups and changes. No external equipment is required to clamp or unclamp the system. The chuck holds tolerances within microns to improve tool precision, surface finish and productivity. Precision run-out can be measured at

GBP 419.99
1

Sandvik Coromant 930-C4-T-20-058 Adapter

Sandvik Coromant 930-C4-T-20-058 Adapter

Product Range: CoroChuck 930Tool Type: Machining centresHigh-precision hydraulic chuck For milling, drilling and reaming operations where precision and high pull-out security is required Available for the most common machine interfacesWith the best pull-out security on the market, this chuck is designed to eliminate vibration for excellent stability and accessibility in all milling and drilling operations. Based on a hydraulic tool clamping system, CoroChuck 930 can be quickly tightened or released with an optimized torque wrench, improving efficiency through quick and easy set-ups and changes. No external equipment is required to clamp or unclamp the system. The chuck holds tolerances within microns to improve tool precision, surface finish and productivity. Precision run-out can be measured at

GBP 419.99
1

Sandvik Coromant 930-C4-HD-20-084 Adapter

Sandvik Coromant 930-C4-HD-20-084 Adapter

Product Range: CoroChuck 930Tool Type: Machining centresHigh-precision hydraulic chuck For milling, drilling and reaming operations where precision and high pull-out security is required Available for the most common machine interfacesWith the best pull-out security on the market, this chuck is designed to eliminate vibration for excellent stability and accessibility in all milling and drilling operations. Based on a hydraulic tool clamping system, CoroChuck 930 can be quickly tightened or released with an optimized torque wrench, improving efficiency through quick and easy set-ups and changes. No external equipment is required to clamp or unclamp the system. The chuck holds tolerances within microns to improve tool precision, surface finish and productivity. Precision run-out can be measured at

GBP 419.99
1

Sandvik Coromant 930-C4-T-12-042 Adapter

Sandvik Coromant 930-C4-T-12-042 Adapter

Product Range: CoroChuck 930Tool Type: Machining centresHigh-precision hydraulic chuck For milling, drilling and reaming operations where precision and high pull-out security is required Available for the most common machine interfacesWith the best pull-out security on the market, this chuck is designed to eliminate vibration for excellent stability and accessibility in all milling and drilling operations. Based on a hydraulic tool clamping system, CoroChuck 930 can be quickly tightened or released with an optimized torque wrench, improving efficiency through quick and easy set-ups and changes. No external equipment is required to clamp or unclamp the system. The chuck holds tolerances within microns to improve tool precision, surface finish and productivity. Precision run-out can be measured at

GBP 419.99
1

Sandvik Coromant 930-C5-T-12-040 Adapter

Sandvik Coromant 930-C5-T-12-040 Adapter

Product Range: CoroChuck 930Tool Type: Machining centresHigh-precision hydraulic chuck For milling, drilling and reaming operations where precision and high pull-out security is required Available for the most common machine interfacesWith the best pull-out security on the market, this chuck is designed to eliminate vibration for excellent stability and accessibility in all milling and drilling operations. Based on a hydraulic tool clamping system, CoroChuck 930 can be quickly tightened or released with an optimized torque wrench, improving efficiency through quick and easy set-ups and changes. No external equipment is required to clamp or unclamp the system. The chuck holds tolerances within microns to improve tool precision, surface finish and productivity. Precision run-out can be measured at

GBP 419.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning 132P-160333-B

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning 132P-160333-B

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 219.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A20-A12

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A20-A12

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 239.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EFF-25-10

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EFF-25-10

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 269.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-16-05

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-16-05

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant EF-40-20 Cylindrical Sleeve

Sandvik Coromant EF-40-20 Cylindrical Sleeve

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 219.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EFF-25-12

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EFF-25-12

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 269.99
1

Sandvik Coromant EF-40-05 Cylindrical Sleeve

Sandvik Coromant EF-40-05 Cylindrical Sleeve

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 219.99
1