343 results (0,17753 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 100 Kg, WxD 1520 X 460mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 100 Kg, WxD 1520 X 460mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 100 kg, WxD 1520 x 460 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 460 mm. Overall width = 1520 mm. Colour = black. Max. shelf load = 100 kg. Shelf depth = 460 mm. Shelf width = 1520 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 439.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 610mm, Extension, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 610mm, Extension, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 250 kg, WxD 1520 x 610 mm, extension shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 610 mm. Overall width = 1520 mm. Colour = black. Max. shelf load = 250 kg. Shelf depth = 610 mm. Shelf width = 1520 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 619.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 360mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 360mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 250 kg, WxD 1520 x 360 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 360 mm. Overall width = 1520 mm. Colour = black. Max. shelf load = 250 kg. Shelf depth = 360 mm. Shelf width = 1520 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 599.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 100 Kg, WxD 1520 X 610mm, Extension, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 100 Kg, WxD 1520 X 610mm, Extension, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 100 kg, WxD 1520 x 610 mm, extension shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 610 mm. Overall width = 1520 mm. Colour = black. Max. shelf load = 100 kg. Shelf depth = 610 mm. Shelf width = 1520 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 569.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 460mm, Extension, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 460mm, Extension, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 250 kg, WxD 1520 x 460 mm, extension shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 460 mm. Overall width = 1520 mm. Colour = black. Max. shelf load = 250 kg. Shelf depth = 460 mm. Shelf width = 1520 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 529.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 460mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 460mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 250 kg, WxD 1520 x 460 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 460 mm. Overall width = 1520 mm. Colour = black. Max. shelf load = 250 kg. Shelf depth = 460 mm. Shelf width = 1520 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 659.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 910 X 610mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 910 X 610mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 250 kg, WxD 910 x 610 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 610 mm. Overall width = 910 mm. Colour = black. Max. shelf load = 250 kg. Shelf depth = 610 mm. Shelf width = 910 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 639.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 100 Kg, WxD 1520 X 610mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 100 Kg, WxD 1520 X 610mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 100 kg, WxD 1520 x 610 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 610 mm. Overall width = 1520 mm. Colour = black. Max. shelf load = 100 kg. Shelf depth = 610 mm. Shelf width = 1520 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 539.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 610mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 1520 X 610mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 250 kg, WxD 1520 x 610 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 610 mm. Overall width = 1520 mm. Colour = black. Max. shelf load = 250 kg. Shelf depth = 610 mm. Shelf width = 1520 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 749.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 910 X 460mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 910 X 460mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 250 kg, WxD 910 x 460 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 460 mm. Overall width = 910 mm. Colour = black. Max. shelf load = 250 kg. Shelf depth = 460 mm. Shelf width = 910 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 499.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 910 X 360mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 250 Kg, WxD 910 X 360mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 250 kg, WxD 910 x 360 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 360 mm. Overall width = 910 mm. Colour = black. Max. shelf load = 250 kg. Shelf depth = 360 mm. Shelf width = 910 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 439.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 100 Kg, WxD 1520 X 460mm, Extension, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Black - Max. Load 100 Kg, WxD 1520 X 460mm, Extension, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, black, max. shelf load 100 kg, WxD 1520 x 460 mm, extension shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Shelf unit design = single sided. Material = steel wire. Overall depth = 460 mm. Overall width = 1520 mm. Colour = black. Max. shelf load = 100 kg. Shelf depth = 460 mm. Shelf width = 1520 mm. Always visually attractive, easy to care for and with clear visibility from all sides. Infinitely extendable, also suitable as a room partition. No memory effect for a temporary heavy load. With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments. Uprights, 25 mm 2 part - easy bolt together assembly. Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (see accessories) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping. The uprights reduce the effective width and depth of the shelves by 25 mm per upright. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 439.99
1

SIMON, EVERS & CO. GMBH High-lift Pallet Truck, Electric, Max. Load 1000 Kg

SIMON, EVERS & CO. GMBH High-lift Pallet Truck, Electric, Max. Load 1000 Kg

High-lift pallet truck, electric, max. load 1000 kg. Supplied = assembled. Max. load = 1000 kg. Lifting range = 85 - 800 mm. Lift drive = electro-hydraulic. Fork length = 1190 mm. Fork width = 160 mm. Distance across forks = 560 mm. Length = 1676 mm. Width = 560 mm. Height = 1286 mm. Steering radius = 210 . Mobile up to lifting height = 400 mm. Lift per pump stroke with QuickLift = 19 mm. Lift per pump stroke = 11 mm. Steering wheel material = polyurethane. Steering wheel diameter = 180 mm. Steering wheel width = 55 mm. Fork roller material = polyurethane. Fork roller version = single. Fork roller diameter = 75 mm. Fork roller width = 75 mm. Product type = high-lift pallet trucks. Colour = melon yellow RAL 1028. Finish = powder coated. Lift, move and deploy loads. Work at an ideal height. QuickLift. All models with QuickLift to save time and energy. QuickLift fast lifting is active for loads up to 100 kg. Light loads are lifted quickly. Heavier loads are raised more slowly, but with minimal effort. Automatic control of the lowering speed. The device is protected by an overload pressure valve. Additional supports for safety when forks are lifted. Polyurethane wheels. All models can also be used as a standard pallet truck. For quick lifting with minimal effort. Adjust height smoothly and evenly at the push of a button when working at frequently changing heights. Integrated 6 A impulse charger. Manual hydraulics are also fully functional at all times.

GBP 3999.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 250 Kg, WxD 910 X 610mm, Extension, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 250 Kg, WxD 910 X 610mm, Extension, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 250 kg, WxD 910 x 610 mm, extension shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 610 mm. Overall width = 910 mm. Max. bay load = 1500 kg. Max. shelf load = 250 kg. Shelf depth = 610 mm. Shelf width = 910 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Mesh shelves made of 6.2 mm thick steel wire. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 439.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 100 Kg, WxD 1520 X 360mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 100 Kg, WxD 1520 X 360mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 100 kg, WxD 1520 x 360 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 360 mm. Overall width = 1520 mm. Max. bay load = 1500 kg. Max. shelf load = 100 kg. Shelf depth = 360 mm. Shelf width = 1520 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 469.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 250 Kg, WxD 910 X 610mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 250 Kg, WxD 910 X 610mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 250 kg, WxD 910 x 610 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 610 mm. Overall width = 910 mm. Max. bay load = 1500 kg. Max. shelf load = 250 kg. Shelf depth = 610 mm. Shelf width = 910 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Mesh shelves made of 6.2 mm thick steel wire. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 659.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 100 Kg, WxD 1520 X 460mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 100 Kg, WxD 1520 X 460mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 100 kg, WxD 1520 x 460 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 460 mm. Overall width = 1520 mm. Max. bay load = 1500 kg. Max. shelf load = 100 kg. Shelf depth = 460 mm. Shelf width = 1520 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 439.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 150 Kg, WxD 910 X 610mm, Extension, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 150 Kg, WxD 910 X 610mm, Extension, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 150 kg, WxD 910 x 610 mm, extension shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 610 mm. Overall width = 910 mm. Max. bay load = 1500 kg. Max. shelf load = 150 kg. Shelf depth = 610 mm. Shelf width = 910 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Mesh shelves made of 4.7 mm thick steel wire. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 439.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 100 Kg, WxD 1520 X 460mm, Extension, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 100 Kg, WxD 1520 X 460mm, Extension, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 100 kg, WxD 1520 x 460 mm, extension shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 460 mm. Overall width = 1520 mm. Max. bay load = 1500 kg. Max. shelf load = 100 kg. Shelf depth = 460 mm. Shelf width = 1520 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 519.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 150 Kg, WxD 910 X 610mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 150 Kg, WxD 910 X 610mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 150 kg, WxD 910 x 610 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 610 mm. Overall width = 910 mm. Max. bay load = 1500 kg. Max. shelf load = 150 kg. Shelf depth = 610 mm. Shelf width = 910 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Mesh shelves made of 4.7 mm thick steel wire. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 659.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 100 Kg, WxD 1220 X 460mm, Extension, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 100 Kg, WxD 1220 X 460mm, Extension, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 100 kg, WxD 1220 x 460 mm, extension shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 460 mm. Overall width = 1220 mm. Max. bay load = 1500 kg. Max. shelf load = 100 kg. Shelf depth = 460 mm. Shelf width = 1220 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 439.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 150 Kg, WxD 910 X 460mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 150 Kg, WxD 910 X 460mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 150 kg, WxD 910 x 460 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 460 mm. Overall width = 910 mm. Max. bay load = 1500 kg. Max. shelf load = 150 kg. Shelf depth = 460 mm. Shelf width = 910 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Mesh shelves made of 4.7 mm thick steel wire. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 599.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 150 Kg, WxD 910 X 360mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 150 Kg, WxD 910 X 360mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 150 kg, WxD 910 x 360 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 360 mm. Overall width = 910 mm. Max. bay load = 1500 kg. Max. shelf load = 150 kg. Shelf depth = 360 mm. Shelf width = 910 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Mesh shelves made of 4.7 mm thick steel wire. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 469.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 250 Kg, WxD 910 X 460mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 250 Kg, WxD 910 X 460mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 250 kg, WxD 910 x 460 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 460 mm. Overall width = 910 mm. Max. bay load = 1500 kg. Max. shelf load = 250 kg. Shelf depth = 460 mm. Shelf width = 910 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Mesh shelves made of 6.2 mm thick steel wire. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 599.99
1

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 250 Kg, WxD 910 X 360mm, Standard, Height 2180mm, 6 Shelves

SIMON, EVERS & CO. GMBH Steel Wire Mesh Shelf Unit - Chrome Plated - Max. Load 250 Kg, WxD 910 X 360mm, Standard, Height 2180mm, 6 Shelves

Steel wire mesh shelf unit, chrome plated, max. shelf load 250 kg, WxD 910 x 360 mm, standard shelf unit, height 2180 mm, 6 shelves. Supplied = flat pack. Shelf unit height = 2180 mm. Material = steel wire, chrome plated. Overall depth = 360 mm. Overall width = 910 mm. Max. bay load = 1500 kg. Max. shelf load = 250 kg. Shelf depth = 360 mm. Shelf width = 910 mm. Professional quality for the highest demands - glossy, easy care, clear visibility from all sides. No memory effect for a temporary heavy load, as the shelves are made of steel wire. Impact and scratch resistant, resistant against oils, greases and many alkalis and acids. Can be infinitely extended, suitable as a room partition and for attractively presenting goods. The universal shelving system. Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves. Where S hooks are used, the max. shelf load is reduced to 100 kg. Can be set up without tools and highly versatile - in store rooms, archives, offices, shops. Only a rubber hammer is required to secure the height adjustment screws. Mobile on non-marking, ball bearing mounted PVC swivel castors. The PVC swivel castors are available with or without wheel stops (see accessories) The PVC swivel castors increase the shelf unit height by 170 mm. Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish. Uprights, 25 mm 2 part - easy to construct by screwing together. Triple nickel plated, with chrome finish. Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm. The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps) This results in a gap between shelves of 15 mm. Mesh shelves made of 6.2 mm thick steel wire. Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The shelf posts reduce the effective width and depth of the shelves by 25 mm per post. The specified max. loads apply with uniform load distribution. Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.

GBP 469.99
1