10 results (0,14516 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

10x Pferd Twist Drill SPB DIN338 HSSE N 12.3 Inox

10x Pferd Twist Drill SPB DIN338 HSSE N 12.3 Inox

Spiral drill INOX dia. 12.3 mm HSS-E Co5 N DIN 338 135 for tough and hard materials Angle135 Diameter12.3 mm Flute length101 mm Length, total151 mm RPM from, grey cast iron, white cast iron259 RPM RPM from, hard non-ferrous metals647 RPM RPM from, rust and acid-resistant steels259 RPM RPM from, soft non-ferrous metals777 RPM RPM from, steels over 700 N/mm518 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 388 RPM RPM to, grey cast iron, white cast iron647 RPM RPM to, hard non-ferrous metals1295 RPM RPM to, rust and acid-resistant steels518 RPM RPM to, soft non-ferrous metals1554 RPM RPM to, steels over 700 N/mm647 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1036 RPM Spiral angle, from36 VersionINOX Packaging unit5 pieces Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX) . Robust tip profile. Very long tool life. Very good temperature resistance due to Co content. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Cobalt-based alloys Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard aluminium alloys Hard non-ferrous metal Hardwood High-temperature-resistant materials Nickel-based alloys (e.g. Inconell and Hastelloy) Nickel or titanium-based superalloys Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft aluminium alloys Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Stainless steel (INOX) Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels Tough aluminium alloys White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 179.90
1

10x Pferd Twist Drill SPB DIN338 HSSE N 12.9 Inox

10x Pferd Twist Drill SPB DIN338 HSSE N 12.9 Inox

Spiral drill INOX dia. 12.9 mm HSS-E Co5 N DIN 338 135 for tough and hard materials Angle135 Diameter12.9 mm Flute length101 mm Length, total151 mm RPM from, grey cast iron, white cast iron247 RPM RPM from, hard non-ferrous metals617 RPM RPM from, rust and acid-resistant steels247 RPM RPM from, soft non-ferrous metals741 RPM RPM from, steels over 700 N/mm494 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 370 RPM RPM to, grey cast iron, white cast iron617 RPM RPM to, hard non-ferrous metals1234 RPM RPM to, rust and acid-resistant steels494 RPM RPM to, soft non-ferrous metals1481 RPM RPM to, steels over 700 N/mm617 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 988 RPM Spiral angle, from36 VersionINOX Packaging unit5 pieces Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX) . Robust tip profile. Very long tool life. Very good temperature resistance due to Co content. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Cobalt-based alloys Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard aluminium alloys Hard non-ferrous metal Hardwood High-temperature-resistant materials Nickel-based alloys (e.g. Inconell and Hastelloy) Nickel or titanium-based superalloys Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft aluminium alloys Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Stainless steel (INOX) Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels Tough aluminium alloys White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 179.90
1

10x Pferd Twist Drill SPB DIN338 HSSE N 12.4 Inox

10x Pferd Twist Drill SPB DIN338 HSSE N 12.4 Inox

Spiral drill INOX dia. 12.4 mm HSS-E Co5 N DIN 338 135 for tough and hard materials Angle135 Diameter12.4 mm Flute length101 mm Length, total151 mm RPM from, grey cast iron, white cast iron257 RPM RPM from, hard non-ferrous metals642 RPM RPM from, rust and acid-resistant steels257 RPM RPM from, soft non-ferrous metals770 RPM RPM from, steels over 700 N/mm514 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 385 RPM RPM to, grey cast iron, white cast iron642 RPM RPM to, hard non-ferrous metals1284 RPM RPM to, rust and acid-resistant steels514 RPM RPM to, soft non-ferrous metals1541 RPM RPM to, steels over 700 N/mm642 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1027 RPM Spiral angle, from36 VersionINOX Packaging unit5 pieces Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX) . Robust tip profile. Very long tool life. Very good temperature resistance due to Co content. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Cobalt-based alloys Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard aluminium alloys Hard non-ferrous metal Hardwood High-temperature-resistant materials Nickel-based alloys (e.g. Inconell and Hastelloy) Nickel or titanium-based superalloys Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft aluminium alloys Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Stainless steel (INOX) Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels Tough aluminium alloys White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 179.90
1

10x Pferd Twist Drill SPB DIN338 HSSE N 12.1 Inox

10x Pferd Twist Drill SPB DIN338 HSSE N 12.1 Inox

Spiral drill INOX dia. 12.1 mm HSS-E Co5 N DIN 338 135 for tough and hard materials Angle135 Diameter12.1 mm Flute length101 mm Length, total151 mm RPM from, grey cast iron, white cast iron263 RPM RPM from, hard non-ferrous metals658 RPM RPM from, rust and acid-resistant steels263 RPM RPM from, soft non-ferrous metals790 RPM RPM from, steels over 700 N/mm526 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 395 RPM RPM to, grey cast iron, white cast iron658 RPM RPM to, hard non-ferrous metals1316 RPM RPM to, rust and acid-resistant steels526 RPM RPM to, soft non-ferrous metals1579 RPM RPM to, steels over 700 N/mm658 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1053 RPM Spiral angle, from36 VersionINOX Packaging unit5 pieces Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX) . Robust tip profile. Very long tool life. Very good temperature resistance due to Co content. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Cobalt-based alloys Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard aluminium alloys Hard non-ferrous metal Hardwood High-temperature-resistant materials Nickel-based alloys (e.g. Inconell and Hastelloy) Nickel or titanium-based superalloys Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft aluminium alloys Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Stainless steel (INOX) Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels Tough aluminium alloys White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 179.90
1

10x Pferd Twist Drill SPB DIN338 HSSE N 12.8 Inox

10x Pferd Twist Drill SPB DIN338 HSSE N 12.8 Inox

Spiral drill INOX dia. 12.8 mm HSS-E Co5 N DIN 338 135 for tough and hard materials Angle135 Diameter12.8 mm Flute length101 mm Length, total151 mm RPM from, grey cast iron, white cast iron249 RPM RPM from, hard non-ferrous metals622 RPM RPM from, rust and acid-resistant steels249 RPM RPM from, soft non-ferrous metals746 RPM RPM from, steels over 700 N/mm498 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 373 RPM RPM to, grey cast iron, white cast iron622 RPM RPM to, hard non-ferrous metals1244 RPM RPM to, rust and acid-resistant steels498 RPM RPM to, soft non-ferrous metals1493 RPM RPM to, steels over 700 N/mm622 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 995 RPM Spiral angle, from36 VersionINOX Packaging unit5 pieces Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX) . Robust tip profile. Very long tool life. Very good temperature resistance due to Co content. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Cobalt-based alloys Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard aluminium alloys Hard non-ferrous metal Hardwood High-temperature-resistant materials Nickel-based alloys (e.g. Inconell and Hastelloy) Nickel or titanium-based superalloys Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft aluminium alloys Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Stainless steel (INOX) Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels Tough aluminium alloys White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 179.90
1

10x Pferd Twist Drill SPB DIN338 HSSE N 12.7 Inox

10x Pferd Twist Drill SPB DIN338 HSSE N 12.7 Inox

Spiral drill INOX dia. 12.7 mm HSS-E Co5 N DIN 338 135 for tough and hard materials Angle135 Diameter12.7 mm Flute length101 mm Length, total151 mm RPM from, grey cast iron, white cast iron251 RPM RPM from, hard non-ferrous metals627 RPM RPM from, rust and acid-resistant steels251 RPM RPM from, soft non-ferrous metals752 RPM RPM from, steels over 700 N/mm502 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 376 RPM RPM to, grey cast iron, white cast iron627 RPM RPM to, hard non-ferrous metals1254 RPM RPM to, rust and acid-resistant steels502 RPM RPM to, soft non-ferrous metals1505 RPM RPM to, steels over 700 N/mm627 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1003 RPM Spiral angle, from36 VersionINOX Packaging unit5 pieces Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX) . Robust tip profile. Very long tool life. Very good temperature resistance due to Co content. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Cobalt-based alloys Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard aluminium alloys Hard non-ferrous metal Hardwood High-temperature-resistant materials Nickel-based alloys (e.g. Inconell and Hastelloy) Nickel or titanium-based superalloys Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft aluminium alloys Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Stainless steel (INOX) Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels Tough aluminium alloys White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 189.90
1

10x Pferd Twist Drill SPB DIN338 HSSE N 12.6 Inox

10x Pferd Twist Drill SPB DIN338 HSSE N 12.6 Inox

Spiral drill INOX dia. 12.6 mm HSS-E Co5 N DIN 338 135 for tough and hard materials Angle135 Diameter12.6 mm Flute length101 mm Length, total151 mm RPM from, grey cast iron, white cast iron253 RPM RPM from, hard non-ferrous metals632 RPM RPM from, rust and acid-resistant steels253 RPM RPM from, soft non-ferrous metals758 RPM RPM from, steels over 700 N/mm506 RPM RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) 379 RPM RPM to, grey cast iron, white cast iron632 RPM RPM to, hard non-ferrous metals1264 RPM RPM to, rust and acid-resistant steels506 RPM RPM to, soft non-ferrous metals1517 RPM RPM to, steels over 700 N/mm632 RPM RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) 1011 RPM Spiral angle, from36 VersionINOX Packaging unit5 pieces Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD offers spiral drills in the STEEL (118 point angle) and INOX (135 point angle) versions. High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand turning version with cross grinding that produces precise drill holes thanks to their high concentricity and exact centring. Advantages Very good chip removal. High concentricity. Exact centring and low feed force thanks to cross grinding. Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX) . Robust tip profile. Very long tool life. Very good temperature resistance due to Co content. Recommendations for use Observe the recommended rotational speeds. When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil. When working on stainless steel (INOX) , remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.) . Safety notes Wear eye protection! Follow the safety instructions! Materials that can be worked Aluminium Annealed cast iron Black annealed cast iron (GTS, GJMB) Brass Bronze Case-hardened steels Casting scale Casting scale with sand contamination and metal contamination Cast iron Cast steel Chipboard Cobalt-based alloys Copper Ductile cast iron Elastomers Fibre-reinforced thermosetting plastics (GRP, CRP) Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 % Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 % Grey/nodular cast iron (GG/GJL, GGG/GJS) Hard aluminium alloys Hard non-ferrous metal Hardwood High-temperature-resistant materials Nickel-based alloys (e.g. Inconell and Hastelloy) Nickel or titanium-based superalloys Other Other non-ferrous metals Plastics Roller-bearing and ball-bearing steels Soft aluminium alloys Soft non-ferrous metal Soft titanium alloys (tensile strength 500 N/mm) Soft wood Stainless steel (INOX) Steel Steel, cast steel Steels over 700 N/mm (> 220 HB) Steels up to 1, 200 N/mm (< 38 HRC) Steels up to 700 N/mm (< 220 HB) Thermoplastics Thermosetting plastics Titanium Titanium alloys Tool steels Tough aluminium alloys White annealed cast iron (GTW, GJMW) Wood Zinc Applications Drilling Drive types Column drill Power drill Robot Stationary machines Tool machine

GBP 179.90
1