267 results (0,14489 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Notifier NFXI-MM10 Ten-way Input Module with Loop Isolation

Notifier NFXI-MM10 Ten-way Input Module with Loop Isolation

Notifier NFXI-MM10 Ten-way Input Module with Loop IsolationThe NFXI-MM10 provides an interface with normally open contact devices. The supervised state normal open circuit fault or short circuit alarm is sent back to the control panel. In Opal Digital Protocol only one address is used for the entire multimodule with sub-addresses completing the remaining addresses.For compatibility with existing installations using Notifier CLIP Protocol the first address is set from 01 to 90 the other modules are automatically assigned the next nine addresses up to six unused addresses can be disabled by dip switch.

GBP 655.45
1

Notifier HOP-134-412 Notifier INSPIRE E15 Panel With 12-Module Slots

Notifier HOP-134-412 Notifier INSPIRE E15 Panel With 12-Module Slots

Notifier HOP-134-412 Notifier INSPIRE E15 Panel With 12-Module SlotsThe INSPIRE series fire alarm control panel from NOTIFIER by Honeywell is a modular easy to use networkable system available in 10U and 15U enclosures. It exploits NOTIFIERs Opal digital protocol to maximise the speed and efficiency of fire detection and alarm whilst supporting legacy CLIP protocol devices. The large 10 inch colour display with its intuitive interface touch screen operation and menu driven features allows quick and easy operation of the system.INSPIREs powerful IDnet network with advanced networking capabilities is supported by a comprehensive connected tools suite which enables significant efficiencies on and off site with easier access programming and maintenance of the system.Ease of useThe INSPIRE panel supports up to 10 modules in a 10U enclosure and up to 14 in a 15U enclosureThe 10display guides users through all operations and data logs with context driven menus and icons providing clear user defined data on the status of the system to provide error free situation managementGraphical and text Cause and Effect programming tools support on and off site commissioningHighly resilient Opal digital protocol system able to pinpoint a loop fault whilst maintaining full system operationKey Features240 W PSU10displayCharger moduleCPU moduleDual Loop moduleRequires Country Code License

GBP 1874.69
1

Notifier HOP-131-206 Notifier INSPIRE E10 Panel With 6-Module Slots

Notifier HOP-131-206 Notifier INSPIRE E10 Panel With 6-Module Slots

Notifier HOP-131-206 Notifier INSPIRE E10 Panel With 6-Module SlotsThe INSPIRE series fire alarm control panel from NOTIFIER by Honeywell is a modular easy to use networkable system available in 10U and 15U enclosures. It exploits NOTIFIERs Opal digital protocol to maximise the speed and efficiency of fire detection and alarm whilst supporting legacy CLIP protocol devices. The large 10 inch colour display with its intuitive interface touch screen operation and menu driven features allows quick and easy operation of the system.INSPIREs powerful IDnet network with advanced networking capabilities is supported by a comprehensive connected tools suite which enables significant efficiencies on and off site with easier access programming and maintenance of the system.Ease of useThe INSPIRE panel supports up to 10 modules in a 10U enclosure and up to 14 in a 15U enclosureThe 10display guides users through all operations and data logs with context driven menus and icons providing clear user defined data on the status of the system to provide error free situation managementGraphical and text Cause and Effect programming tools support on and off site commissioningHighly resilient Opal digital protocol system able to pinpoint a loop fault whilst maintaining full system operationKey Features240 W PSU10displayCharger moduleCPU moduleDual Loop moduleRequires Country Code License

GBP 1471.51
1

Notifier Honeywell ABT-DMS-LCD Zone Microphone with LCD

Notifier Honeywell ABT-DMS-LCD Zone Microphone with LCD

Notifier Honeywell ABT-DMS-LCD Zone Microphone with LCDFor intuitive and easier operation ABT-DMS-LCD has been equipped with a touch-screen display. Navigation in the menu and change of settings is possible by means of both control buttons located next to LCD display and touch-screen display. ABT-DMS-LCD can only be used for purposes not related to evacuation alarm.Zone microphone is equipped with intercom function which provides two-way communication between the zone microphones. ABT-DMS-LCD has 4 local audio inputs on board and 1 audio output which allows for further system extension. Communication with control units takes place via Ethernet 10100BASE -TX 1 LAN port.Details45 LCD touch screen for fast and clear matricing and system managementfour non-symmetrical audio inputs 18 stereo jack connectorbuilt-in speakerstereo jack socets for headset audio outimplemented intercom functionextension up to five 20-button modulespower supply via POE or locally 48 VDC

GBP 2455.62
1

Notifier PRL-LED-EN Pearl Fixed 2 Loop Intelligent Fire Alarm Control Panel with 64 LEDs

Notifier PRL-LED-EN Pearl Fixed 2 Loop Intelligent Fire Alarm Control Panel with 64 LEDs

Notifier PRL-LED-EN Pearl Fixed 2 Loop Intelligent Fire Alarm Control Panel with 64 LEDsThe Pearl fire alarm control panel from Notifier by Honeywell is a robust and easy to use networkable 1 or 2 loop panel. It exploits Notifiers class leading Opal digital protocol to maximise the speed and efficiency of fire detection and alarm. The large display with its intuitive interface and menu driven features allows quick and easy operation of the system.Coupled with more power and devices on the loop than other panels in its class the simple design will allow for trouble-free first fix installation. Compatible with the ID2net network used by the ID3000 the Pearl panel is supported by an integrated tools suite to enhance and simplify the system management.Extended capacityThe Pearl supports up to 636 loop devices 159 detectors plus 159 modules per loopLonger loops but fewer of them will give the opportunity to save on installation time cost and wiringHighly resilient Opal system able to pinpoint a loop fault whilst maintaining full system operationPowerful networking capability - Up to 16 Pearl panels controlling over 10000 devices can be networked via the superfast ID2net prioritising a fire signal to communicate across a network in under three secondsEase of useIntuitive on-site management - backlit buttons for fast error free situation management and large display giving complete information at a glanceSimpler diagnostics and maintenance - panel control of detector LEDs enabling confirmation of detector statusText programming via MS Excel spread sheetUser permissions set per individual passwordFlexibilityUnique first fix bracket with adaptations for 19 rack or flush mounting.Fast system set up and commissioning via the panel loop Autolearn and advanced PC tools suiteComprehensive Cause Effect programming capabilityPanel sounder and beacon synchronisationSystem extensions and adaptations can be made quickly without compromising fire cover and without extensive re-cablingSeparate text change without risk to Cause Effect or system configuration.Ability to run BS5839 part 6 system for HMO

GBP 2044.22
1

Notifier PRL-LED-EN-1 Pearl Fixed 1 Loop Intelligent Fire Alarm Control Panel with 64 LEDs

Notifier PRL-LED-EN-1 Pearl Fixed 1 Loop Intelligent Fire Alarm Control Panel with 64 LEDs

Notifier PRL-LED-EN-1 Pearl Fixed 1 Loop Intelligent Fire Alarm Control Panel with 64 LEDsThe Pearl fire alarm control panel from Notifier by Honeywell is a robust and easy to use networkable 1 or 2 loop panel. It exploits Notifiers class leading Opal digital protocol to maximise the speed and efficiency of fire detection and alarm. The large display with its intuitive interface and menu driven features allows quick and easy operation of the system.Coupled with more power and devices on the loop than other panels in its class the simple design will allow for trouble-free first fix installation. Compatible with the ID2net network used by the ID3000 the Pearl panel is supported by an integrated tools suite to enhance and simplify the system management.Extended capacityThe Pearl supports up to 636 loop devices 159 detectors plus 159 modules per loopLonger loops but fewer of them will give the opportunity to save on installation time cost and wiringHighly resilient Opal system able to pinpoint a loop fault whilst maintaining full system operationPowerful networking capability - Up to 16 Pearl panels controlling over 10000 devices can be networked via the superfast ID2net prioritising a fire signal to communicate across a network in under three secondsEase of useIntuitive on-site management - backlit buttons for fast error free situation management and large display giving complete information at a glanceSimpler diagnostics and maintenance - panel control of detector LEDs enabling confirmation of detector statusText programming via MS Excel spread sheetUser permissions set per individual passwordFlexibilityUnique first fix bracket with adaptations for 19 rack or flush mounting.Fast system set up and commissioning via the panel loop Autolearn and advanced PC tools suiteComprehensive Cause Effect programming capabilityPanel sounder and beacon synchronisationSystem extensions and adaptations can be made quickly without compromising fire cover and without extensive re-cablingSeparate text change without risk to Cause Effect or system configuration.Ability to run BS5839 part 6 system for HMO

GBP 1619.16
1

Notifier NFXI-BEAM-T Loop Powered Beam Detector with Test Facility

Notifier NFXI-BEAM-T Loop Powered Beam Detector with Test Facility

Notifier NFXI-BEAM-T Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 1026.98
1

Notifier Honeywell DKM18 Emergency Microphone Extension Module 583506

Notifier Honeywell DKM18 Emergency Microphone Extension Module 583506

Notifier Honeywell DKM18 Emergency Microphone Extension Module 583506Digital key module DKM18 with 18 freely configurable keys and 18 LEDs. Up to 6 of these DKM18 key modules can be connected to a redundant DCS15 or DCS2. This allows for redundant call stations with up to 120 keys and 120 LEDs. Only suitable for call stations with the .RE suffix. Please note this unit is not suitable for use with the older 58330X.21 call stations.

GBP 948.29
1

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply 020-727

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply 020-727

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply 020-727The Notifier ID3000 family of fire alarm control panels deliver the power and flexibility to meet the even the most demanding of requirements. From 2 to 8 loops in a single ID3000 panel to over 500 loops on a network an ID3000 system offers unrivalled stability versatility and capacity. When it comes to giving you the earliest possible warning of a potential fire threat the ID3000 supports Notifiers comprehensive range of detectors advanced fire detection sensors and loop devices delivering you the most complete and versatile fire alarm system in the market place.The ID3000 can be programmed to adapt to the different uses of the areas where smoke detectors are installed. A total of 9 different sensitivity levels can be assigned to individual smoke sensors thereby allowing the system designer to closely match the sensors response to the environment in which the device is located. This even allows smoke detection to be turned off leaving heat detection active.Key Features2-8 Analogue Addressable Loops each of up to 198 devices255 Fire zones per panelFully approved peer to peer network of up to 63 panels maintains 3 second call point response time over the networkFlexible timer functions system sensitivity and functionality can be tailored for the time of day or day of weekSophisticated cause and effect programming including support for non-fire signals and over-ride capability for smoke control systems.Convenience features for commissioning and maintenance engineers such as auto-learn of loops walk test and double address detection.CPD approved by LPCB BRE VdSKit Includes1 x 020-538 - Basic Equipment kit 2-8 Loops1 x 020-579 - 7A PSU 4.5A or 7A User selectable1 x 020-543- Dual transmittion path board kit1 x 020-588 - Dual loop board kit1 x 020-474-009 - Extended deep back-box kit Space for up to 38Ah batteries. H620mm W500mm D220mm.1 x 020-480-009 - Main cover kit1 x 020-485-009 - Extension cover blanking kit1 x 020-481-009 - Extension cover kit

GBP 4722.00
1

Notifier ID3000 6 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-734

Notifier ID3000 6 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-734

Notifier ID3000 6 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-734The Notifier ID3000 family of fire alarm control panels deliver the power and flexibility to meet the even the most demanding of requirements. From 2 to 8 loops in a single ID3000 panel to over 500 loops on a network an ID3000 system offers unrivalled stability versatility and capacity. When it comes to giving you the earliest possible warning of a potential fire threat the ID3000 supports Notifiers comprehensive range of detectors advanced fire detection sensors and loop devices delivering you the most complete and versatile fire alarm system in the market place.The ID3000 can be programmed to adapt to the different uses of the areas where smoke detectors are installed. A total of 9 different sensitivity levels can be assigned to individual smoke sensors thereby allowing the system designer to closely match the sensors response to the environment in which the device is located. This even allows smoke detection to be turned off leaving heat detection active.Key Features2-8 Analogue Addressable Loops each of up to 198 devices255 Fire zones per panelFully approved peer to peer network of up to 63 panels maintains 3 second call point response time over the networkFlexible timer functions system sensitivity and functionality can be tailored for the time of day or day of weekSophisticated cause and effect programming including support for non-fire signals and over-ride capability for smoke control systems.Convenience features for commissioning and maintenance engineers such as auto-learn of loops walk test and double address detection.CPD approved by LPCB BRE VdSKit Contains1 x 020-538 - Basic Equipment kit 2-8 loops2 x 020-588 - Dual loop board kit1 x 020-579 - PSU 7A power supply. 4.5A or 7A user selectable1 x 020-543- Dual transmission path board kit1 x 020-474-009 - Extended deep back-box kitspace for up to 38Ah batteries. H620mm W500mm D220mm.1 x 020-480-009 - Main cover kit1 x 020-481-009 - Extension cover kit1 x 020-559-001 - Extension chassis kit. LED indications for zones 1-64. Space for internal printer

GBP 5150.30
1

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-730

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-730

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-730The Notifier ID3000 family of fire alarm control panels deliver the power and flexibility to meet the even the most demanding of requirements. From 2 to 8 loops in a single ID3000 panel to over 500 loops on a network an ID3000 system offers unrivalled stability versatility and capacity. When it comes to giving you the earliest possible warning of a potential fire threat the ID3000 supports Notifiers comprehensive range of detectors advanced fire detection sensors and loop devices delivering you the most complete and versatile fire alarm system in the market place.The ID3000 can be programmed to adapt to the different uses of the areas where smoke detectors are installed. A total of 9 different sensitivity levels can be assigned to individual smoke sensors thereby allowing the system designer to closely match the sensors response to the environment in which the device is located. This even allows smoke detection to be turned off leaving heat detection active.Key Features2-8 Analogue Addressable Loops each of up to 198 devices255 Fire zones per panelFully approved peer to peer network of up to 63 panels maintains 3 second call point response time over the networkFlexible timer functions system sensitivity and functionality can be tailored for the time of day or day of weekSophisticated cause and effect programming including support for non-fire signals and over-ride capability for smoke control systems.Convenience features for commissioning and maintenance engineers such as auto-learn of loops walk test and double address detection.CPD approved by LPCB BRE VdSKit Contains1 x 020-538 - Basic Equipment kit 2-8 loops1 x 020-588 - Dual loop board kit1 x 020-579 - PSU 7A power supply 4.5A or 7A user selectable1 x 020-543 - Dual transmission path board kit1 x 020-474-009 - Extended deep back-box kit Space for up to 38Ah batteries. H620mm W500mm D220mm.1 x 020-480-009 - Main cover kit1 x 020-481-009 - Extension cover kit1 x 020-559-001 - Extension chassis kit. LED indications for zones 1-64. Space for internal printer

GBP 4599.50
1

Notifier ID3000 8 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-738

Notifier ID3000 8 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-738

Notifier ID3000 8 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-738The Notifier ID3000 family of fire alarm control panels deliver the power and flexibility to meet the even the most demanding of requirements. From 2 to 8 loops in a single ID3000 panel to over 500 loops on a network an ID3000 system offers unrivalled stability versatility and capacity. When it comes to giving you the earliest possible warning of a potential fire threat the ID3000 supports Notifiers comprehensive range of detectors advanced fire detection sensors and loop devices delivering you the most complete and versatile fire alarm system in the market place.The ID3000 can be programmed to adapt to the different uses of the areas where smoke detectors are installed. A total of 9 different sensitivity levels can be assigned to individual smoke sensors thereby allowing the system designer to closely match the sensors response to the environment in which the device is located. This even allows smoke detection to be turned off leaving heat detection active.Key Features2-8 Analogue Addressable Loops each of up to 198 devices255 Fire zones per panelFully approved peer to peer network of up to 63 panels maintains 3 second call point response time over the networkFlexible timer functions system sensitivity and functionality can be tailored for the time of day or day of weekSophisticated cause and effect programming including support for non-fire signals and over-ride capability for smoke control systems.Convenience features for commissioning and maintenance engineers such as auto-learn of loops walk test and double address detection.CPD approved by LPCB BRE VdSKit Contains1 x 020-538 - Basic Equipment kit 2-8 loops3 x 020-588 - Dual loop board kit1 x 020-579 - PSU 7A power supply. 4.5A or 7A user selectable1 x 020-543- Dual transmission path board kit1x 020-548 - Optional status indicator board kit for 7A PSU1 x 020-473-009 - Extended back-box kit Space for up to 17Ah batteries. H620mm W500mm D122mm.1 x 020-480-009 - Main cover kit1 x 020-481-009 - Extension cover kit1 x 020-559-001 - Extension chassis kit. LED indications for zones 1-64. Space for internal printer1 x 020-541-009 - 7A PSU78AH battery cabinet kit

GBP 6122.94
1

Notifier ECO1000BREL12L Detector Base With Latching Relay 12V

Notifier ECO1000BREL12L Detector Base With Latching Relay 12V

Notifier ECO1000BREL12L Detector Base With Latching Relay 12VHoneywell Notifier ECO1000BREL12L sensor base with relay output 12V. The relay base has been designed to provide interfacing between an ECO1000 detector and 12V Fire Systems or Security Control Panels.Key FeaturesAccepts ECO1000 range of detectors12V Latching versionCompatible with Fire Security SystemsTamper resistant featureDetector removal detection 2 wire systemRemote LED option

GBP 17.44
1

Notifier Honeywell DKM Plus 18 Button Digital Key Module 583526

Notifier Honeywell DKM Plus 18 Button Digital Key Module 583526

Notifier Honeywell DKM Plus 18 Button Digital Key Module 583526The Digital Key Module DKM plus offer 18 freely configurable keys and 18 LEDs. Up to six Digital Key Module DKM plus can be connected to a Digital Call Station DCS plus. This allows communication stations with up to 120 keys and 120 LEDs.Key FeaturesDaisy chain cabling from DCS plus to one or more DKM plusMechanical connection to DCS plus and further DKM plus

GBP 931.26
1

Notifier B401R Detector Mounting Base with 470R Resistor

Notifier B401R Detector Mounting Base with 470R Resistor

Notifier B401R Detector Mounting Base with 470R ResistorThe B401R plug-in detector base is used with System Sensor model 2451E photo electronic detector head and model 1451E ionization detector head. The capability of plugging these detectors into a variety of special bases makes them more versatile than equivalent direct-wired models.The B401R base is intended for use in 2-wire systems with screw terminals provided for power ground and remote annunciator connections. The B401R base also contains a resistor to provide current limiting in the alarm state.

GBP 11.76
1

Notifier Honeywell Protective Cabinet with DKM18 584962

Notifier Honeywell Protective Cabinet with DKM18 584962

Notifier Honeywell Protective Cabinet with DKM18 584962Wall enclosures made of sheet steel for holding one firefighter paging microphone DCSF12 Part No. 583503.RE or DCSF Part No. 583504.RE and one DKM18 Part No. 583306.21 in the original enclosure. Additionally you should order an installation kit Part No. 583507 for each DCSDKM.Key FeaturesPowder coated in red similar RAL 3000Door with 2 viewing windows 180 x 120 mm with acrylic glass coverPrepared to include fire closureInternal mounting plate for installation of the DCSDKM6 Cable entries on rear wall of housing2 Cable entries on the upper and lower housing - and bottom side respectively2 Cable entries right and left of housing respectively2 Mounting brackets for LWL-Converter type. Part No. 583317.21 in housing

GBP 889.88
1