18 results (0,15110 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Mountz T-70BL Transformer (120V)

Mountz T-70BL Transformer (120V)

The T-45BL is a power supply that operates with select Mountz electric screwdrivers. It is single tool controller that is designed to operate at 100 - 240V. Switchable output voltage gives two-speed option on screwdrivers. This operates with Electric Screwdriver Models: BL2000 BL75000 and BLG4000 - BLG5000. Model:T-45BL Tool Weight:11.3 oz. Tool Length:5.75 Tool Width:2.8 Tool Height:1.67 Maximum Output:1A Output VDC:20/30V Input VAC:100-240V Fuse Size:3.15A

GBP 359.99
1

Mountz FT-30D Mini Transformer (Only for Mini Bf-series Screwdrivers)

Mountz FT-30D Mini Transformer (Only for Mini Bf-series Screwdrivers)

The ET-30D is a mini power supply that operates with select Mountz electric screwdrivers. It is single tool controller that is designed to operate at either 110v and 230v. The unit is can connect with the Scout screw counting system. Note: Operates with Electric Screwdriver Models: EF030, EF040 & EF05. Model:ET-30D Tool Weight:8.8 oz. Tool Length:5.125 Tool Width:2.75 Tool Height:1.5 Maximum Output:1A Output VDC:30V Input VAC:100-230V

GBP 259.99
1

Mountz T-45BL Transformer (120V)

Mountz T-45BL Transformer (120V)

The T-45BL is a power supply that operates with select Mountz electric screwdrivers. It is single tool controller that is designed to operate at 100 - 240V. Switchable output voltage gives two-speed option on screwdrivers. This operates with Electric Screwdriver Models: BL2000 BL75000 and BLG4000 - BLG5000. Model:T-45BL Tool Weight:11.3 oz. Tool Length:5.75 Tool Width:2.8 Tool Height:1.67 Maximum Output:1A Output VDC:20/30V Input VAC:100-240V Fuse Size:3.15A

GBP 269.99
1

Mountz ET-30D Mini Transformer (Only for Mini EF-Series Screwdrivers)

Mountz ET-30D Mini Transformer (Only for Mini EF-Series Screwdrivers)

The ET-30D is a mini power supply that operates with select Mountz electric screwdrivers. It is single tool controller that is designed to operate at either 110v and 230v. The unit is can connect with the Scout screw counting system. Note: Operates with Electric Screwdriver Models: EF030, EF040 & EF05. Model:ET-30D Tool Weight:8.8 oz. Tool Length:5.125 Tool Width:2.75 Tool Height:1.5 Maximum Output:1A Output VDC:30V Input VAC:100-230V

GBP 259.99
1

Mountz STC30 Plus Transformer (V4.1 for SS-series)

Mountz STC30 Plus Transformer (V4.1 for SS-series)

The STC 30 Plus is a power supply that operates with select Mountz electric screwdrivers. It is single tool controller that is designed to operate at both 110v and 230v. Switchable output voltage gives two-speed option on screwdrivers. The unit is can connect with the Scout screw counting system. Operates with Electric Screwdriver Models: A-Series, CL-Series, EF-Series, & K-Series Model:STC30 Plus Tool Weight:1.8 lbs. Tool Length:7.5 Tool Width:4.375 Tool Height:3.375 Rated Output:2.5A Maximum Output:5A Output VDC:20/30V or 30/38V Input VAC:110/230V Fuse Size:6.3A

GBP 359.99
1

Mountz STC30 Plus Transformer (V4.3)

Mountz STC30 Plus Transformer (V4.3)

The STC 30 Plus is a power supply that operates with select Mountz electric screwdrivers. It is single tool controller that is designed to operate at both 110v and 230v. Switchable output voltage gives two-speed option on screwdrivers. The unit is can connect with the Scout screw counting system. Operates with Electric Screwdriver Models: A-Series, CL-Series, EF-Series, & K-Series Model:STC30 Plus Tool Weight:1.8 lbs. Tool Length:7.5 Tool Width:4.375 Tool Height:3.375 Rated Output:2.5A Maximum Output:5A Output VDC:20/30V or 30/38V Input VAC:110/230V Fuse Size:6.3A

GBP 359.99
1

Mountz RDA10I (1-10 Lbf.in 1/4F X 1/4M) (11.3 - 113 cN.m

Mountz RDA10I (1-10 Lbf.in 1/4F X 1/4M) (11.3 - 113 cN.m

The run down adapter (RDA) is designed to provide consistent and reliable torque readings for use with power driven torque control tools. The RDA will reduce the impact and irregular peaks that cause poor repeatability. Each RDA has an effective torque range and will supply repeatable torque data within that range if used correctly. The run down adapter is mounted in-line between the tool drive and transducer. Operates in clockwise direction only. After each run down, the RDA should be completely backed-up. Compact size and lightweight. Model:RDA-50F Drive Size:3/8" Sq. Dr. Range: 6.8 - 67.8 N.m ,5 - 50 lbf.ft,0.7 - 6.9 kgf.m.

GBP 379.99
1

Mountz RDA100I (10-100 Lbf.in 1/4F X 1/4M) (113 - 1130 cN.m

Mountz RDA100I (10-100 Lbf.in 1/4F X 1/4M) (113 - 1130 cN.m

The run down adapter (RDA) is designed to provide consistent and reliable torque readings for use with power driven torque control tools. The RDA will reduce the impact and irregular peaks that cause poor repeatability. Each RDA has an effective torque range and will supply repeatable torque data within that range if used correctly. The run down adapter is mounted in-line between the tool drive and transducer. Operates in clockwise direction only. After each run down, the RDA should be completely backed-up. Compact size and lightweight. Model:RDA-50F Drive Size:3/8" Sq. Dr. Range: 6.8 - 67.8 N.m ,5 - 50 lbf.ft,0.7 - 6.9 kgf.m.

GBP 379.99
1

Mountz Mini Screw Type RDA6 (1/4 Square DR x 6-32)

Mountz Mini Screw Type RDA6 (1/4 Square DR x 6-32)

The mini RDA unit with fastener is designed for low torque sensors. Engineered to provide consistent and reliable torque readings for use with low torque power tools. The mini run down adapter is mounted in-line between the tool drive and torque sensor. The kit includes 5 mini RDA units along with 10 fasteners. Operates in clockwise direction only.Note: Change screws when thread wear occurs. (Recommended - approximately every 25 run downs). The Mini-RDA unit is not made of Stainless Steel material. The mini RDA unit with fastener is designed for low torque sensors BMX20z - BMX10i and MTX models. Screws:PH Phil 10-32 x 1/4 SS

GBP 239.99
1

Mountz Mini Screw Type RDA4 (1/4 Square DR x 4-40)

Mountz Mini Screw Type RDA4 (1/4 Square DR x 4-40)

The mini RDA unit with fastener is designed for low torque sensors. Engineered to provide consistent and reliable torque readings for use with low torque power tools. The mini run down adapter is mounted in-line between the tool drive and torque sensor. The kit includes 5 mini RDA units along with 10 fasteners. Operates in clockwise direction only.Note: Change screws when thread wear occurs. (Recommended - approximately every 25 run downs). The Mini-RDA unit is not made of Stainless Steel material. The mini RDA unit with fastener is designed for low torque sensors BMX20z - BMX10i and MTX models. Screws:PH Phil 10-32 x 1/4 SS

GBP 239.99
1

Mountz RDA50I (5-50 Lbf.in 1/4F X 1/4M) (56.5 - 565 cN.m

Mountz RDA50I (5-50 Lbf.in 1/4F X 1/4M) (56.5 - 565 cN.m

The run down adapter (RDA) is designed to provide consistent and reliable torque readings for use with power driven torque control tools. The RDA will reduce the impact and irregular peaks that cause poor repeatability. Each RDA has an effective torque range and will supply repeatable torque data within that range if used correctly. The run down adapter is mounted in-line between the tool drive and transducer. Operates in clockwise direction only. After each run down, the RDA should be completely backed-up. Compact size and lightweight. Model:RDA-50F Drive Size:3/8" Sq. Dr. Range: 6.8 - 67.8 N.m ,5 - 50 lbf.ft,0.7 - 6.9 kgf.m.

GBP 379.99
1

Mountz Mini Screw Type RDA10 (1/4 Square DR x 10-32)

Mountz Mini Screw Type RDA10 (1/4 Square DR x 10-32)

The mini RDA unit with fastener is designed for low torque sensors. Engineered to provide consistent and reliable torque readings for use with low torque power tools. The mini run down adapter is mounted in-line between the tool drive and torque sensor. The kit includes 5 mini RDA units along with 10 fasteners. Operates in clockwise direction only.Note: Change screws when thread wear occurs. (Recommended - approximately every 25 run downs). The Mini-RDA unit is not made of Stainless Steel material. The mini RDA unit with fastener is designed for low torque sensors BMX20z - BMX10i and MTX models. Screws:PH Phil 10-32 x 1/4 SS

GBP 239.99
1

Mountz RDA25I (2.5-25 Lbf.in 1/4F X 1/4M) (28.25 - 282.5 cN.m

Mountz RDA25I (2.5-25 Lbf.in 1/4F X 1/4M) (28.25 - 282.5 cN.m

The run down adapter (RDA) is designed to provide consistent and reliable torque readings for use with power driven torque control tools. The RDA will reduce the impact and irregular peaks that cause poor repeatability. Each RDA has an effective torque range and will supply repeatable torque data within that range if used correctly. The run down adapter is mounted in-line between the tool drive and transducer. Operates in clockwise direction only. After each run down, the RDA should be completely backed-up. Compact size and lightweight. Model:RDA-50F Drive Size:3/8" Sq. Dr. Range: 6.8 - 67.8 N.m ,5 - 50 lbf.ft,0.7 - 6.9 kgf.m.

GBP 379.99
1

Mountz STC40 Transformer

Mountz STC40 Transformer

The STC40 is a power supply that operates with select Mountz electric screwdrivers. It is single tool controller that is designed to operate at either 110v and 230v. The unit is can connect with the Scout screw counting system. Operates with Electric Screwdriver Models: LF-Series, BF-Series and NF-Series. The program lock key is required for the BF and NF-Series Standard models and Soft Stop models. RPM & Soft Start Settings can not be adjusted without it.The program lock key can not be used with Plus models of BF, NF-Series and Soft Stop models and Angle & Auto Reverse models. Model:STC40 Tool Weight:1.8 lbs. Tool Length:7.5 Tool Width:4.375 Tool Height:2.375 Maximum Output:10A Output VDC:30/40V Input VAC:110/230V

GBP 399.99
1