23 results (0,14086 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Morley IAS MI-IM10-S2I Ten Input Monitor Module

Morley IAS MI-IM10-S2I Ten Input Monitor Module

Morley IAS MI-IM10-S2I Ten Input Monitor ModuleThe IM-10 ten input monitor module to provide an interface to a normally open contact device such as plant outputs or flow switches. The first address is set from 01 to 90 the other modules are automatically assigned the next nine addresses up to four unused addresses can be disabled. The supervised state normal open circuit fault or short circuit alarm is sent back to the control panel.Key FeaturesMaximum Standby Current 3.50mA Blinking LED once every 5 secondsMaximum Alarm Current 60mA at 32V assuming all ten LEDS solid onMaximum Supervising Line Wiring Resistance 1000 OhmsMaximum Line Voltage 11.3VDCMaximum Line Current 240AMinMax Wire Gauge for Terminals 1.0mm2 to 2.0mm2

GBP 514.31
1

Morley IAS MI-MM3E-S2 Mini Input Module

Morley IAS MI-MM3E-S2 Mini Input Module

Morley IAS MI-MM3E-S2 Mini Input ModuleThe MI-MM3E-S2 is an addressable input module. It will interface with contact devices such as security contacts waterflow switches and call points. It is capable of being connected in Class B wiring configurations. It provides a two-wire initiating circuit for normally open contact fire alarm and security devices.In addition to transmitting the supervised state of the monitored device normal open or short the full analogue supervision measurement is sent back to the panel. The compact size allows it to fit inside devices or junction boxes behind devices. Its size and light weight allows it to be installed without the need to be rigidly mounted. All Morley-IAS products are covered by our extended 3-year warranty.Key FeaturesCompact sizeRotary address switchesLow standby currentComplies with EN54-18

GBP 49.92
1

Morley M5A-RP06FF-K013-01 Addressable Flexible Manual Call Point with Isolator

Morley M5A-RP06FF-K013-01 Addressable Flexible Manual Call Point with Isolator

Morley M5A-RP06FF-K013-01 Addressable Flexible Manual Call Point with IsolatorThe MI-MCP Series Manual Call Points are designed to provide a manual alarm interface to Morley IASs fire alarm control panel. Installation efficiency flexibility and compliance with the latest standards are at the heart of the call point range.The unique plug and play concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link to provide continuity for testing. During the commissioning phase the links are removed and the terminal block is simply inserted into the connector at the back of the unit.Key FeaturesUnique Plug Play installation conceptRe-settable operating element optionAnalogue addressable communicationsFully compliant with EN54 Part 11Backward compatibilityEnhanced aestheticsIntegral LEDIntegral loop isolation option

GBP 59.90
1

Morley M5A-RP06FG-K013-01 Addressable Glass Manual Call Point with Isolator

Morley M5A-RP06FG-K013-01 Addressable Glass Manual Call Point with Isolator

Morley M5A-RP06FG-K013-01 Addressable Glass Manual Call Point with IsolatorThe MI-MCP Series Manual Call Points are designed to provide a manual alarm interface to Morley IASs fire alarm control panel. Installation efficiency flexibility and compliance with the latest standards are at the heart of the call point range.The unique plug and play concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link to provide continuity for testing. During the commissioning phase the links are removed and the terminal block is simply inserted into the connector at the back of the unit.Key FeaturesUnique Plug Play installation conceptRe-settable operating element optionAnalogue addressable communicationsFully compliant with EN54 Part 11Backward compatibilityEnhanced aestheticsIntegral LEDIntegral loop isolation option

GBP 58.52
1

Morley M5A-RP05FG-K013-01 Addressable Glass Manual Call Point

Morley M5A-RP05FG-K013-01 Addressable Glass Manual Call Point

Morley M5A-RP05FG-K013-01 Addressable Glass Manual Call PointThe MI-MCP Series Manual Call Points are designed to provide a manual alarm interface to Morley IASs fire alarm control panel. Installation efficiency flexibility and compliance with the latest standards are at the heart of the call point range.The unique plug and play concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link to provide continuity for testing. During the commissioning phase the links are removed and the terminal block is simply inserted into the connector at the back of the unit.Key FeaturesUnique Plug Play installation conceptRe-settable operating element optionAnalogue addressable communicationsFully compliant with EN54 Part 11Backward compatibilityEnhanced aestheticsIntegral LEDIntegral loop isolation option

GBP 50.26
1

Morley D2E Duct Detector Housing with B401 Base

Morley D2E Duct Detector Housing with B401 Base

Morley D2E Duct Detector Housing with B401 BaseThe InnovairFlex 2DE 2-wire photoelectric duct smoke detector features a pivoting housing that fits various applications both square and rectangular footprints mount to round or rectangular duct work. The new duct smoke detector senses airflow speeds ranging from 1.5-20m per second with proven precision. The enhancements built into this model improve false alarm immunity with plug-in sensor head broaden operation temperature -20 to 70 degree and humidity 0 to 95 percent non-condensing ranges while simplifying installation and maintenance. These advance features can detect smoke even in the harshest duct applications.The new design provides more wiring space with an added 20mm conduit knockout. Numbers and labels for terminal designations are consistent with previous Innovair models. The new sampling tube can be clicked into position with one smooth motion from either the front or the back of the detector.The InnovairFlex D2E duct smoke detector has signals to indicate trouble and maintenance conditions. Additionally a cover tamper feature is incorporated to indicate a trouble condition for removed or improperly installed sensor cover. An improved cover design with an integrated low-flow feature isolates the sensor head from low-flow technology for simple maintenance.Key FeaturesPhotoelectric integrated low-flow technologyAir velocity rating from 1.5 ms to 20.3 msecVersatile mounting options in square or rectangular configuration with modular constructionPlug-in sensorSuperb false alarm immunity with the latest sensor technologyBroader ranges for operating temperature -20C to 70C and humidity 0 to 95 non-condensingPatented sampling tube installs from front or back of the detector with no tools requiredA cover tamper feature to indicate a trouble condition for removed or improperly installed sensor coverIncreased wiring space with 15mm and 20mm conduit knockoutImproved LED status24 VDCBackward compatibility with existing DH400 range including remote accessoriesPlease Note this product does not come complete with a detector please use the 2351E.

GBP 215.50
1

Morley EVCS-HFP Flush Type A Push Door Outstation

Morley EVCS-HFP Flush Type A Push Door Outstation

Morley EVCS-HFP Flush Type A Push Door OutstationThe Type A outstation is a monitored phone handset providing full duplex speech capability. The unit is available as a surface mounting or flush mounting unit cased in a metal wall mounting enclosure. The surface mounted outstation is also available as a lock door option.The Type A Outstation is a slick compact unit which offers easy access via a magnetic push catch door and a unique front levelling system allowing the back box to be mounted at a slight angle whilst still retaining a true front face and door. Available in red and Stainless Steel.Key FeaturesCompact designHigh volume ringerStatus LEDTelecoil for hearing impaired usersFull duplex operationMagnetic push catch for quick and easy accessVersatility the unit can be used on all EVCS systemsDual use the Type A Outstation can be used as a fire telephone or a disabled refuge call point

GBP 335.66
1

Morley EVCS-XC 8-Way Exchange Unit

Morley EVCS-XC 8-Way Exchange Unit

Morley EVCS-XC 8-Way Exchange UnitThe Network Exchange Unit delivers an efficient solution to larger EVCS sites with distributed loop based architecture. EVCS Network 8 is a system for larger Disabled Refuge and Emergency telephone installations.Its distributed loop architecture provides a competitive scalable system for up to 256 communication points. The Network Exchange Unit provides connectivity for 8 call stations. Larger systems are achieved by adding more Exchange Units each installed locally to the area of operation delivering a secure and cost-effective installationKey FeaturesModular scalable system architecture for efficient installationLoop based network for fault resilienceUp to 160 outstations via 20 Network Exchange units with V4.21 softwareUp to 256 Outstations via 32 Network Exchange Units with V5.0 softwareOutput relay to control external equipment such as VAPABuilt in power supply and battery back-upPower supply for System Master HandsetsGlobal configuration from Master HandsetCompact wall mounted unitFull duplex communications with Outstation

GBP 335.66
1

Morley EVCS-HSPSS Stainless Steel Surface Type A Push Door Outstation

Morley EVCS-HSPSS Stainless Steel Surface Type A Push Door Outstation

Morley EVCS-HSPSS Stainless Steel Surface Type A Push Door OutstationThe Type A outstation is a monitored phone handset providing full duplex speech capability. The unit is available as a surface mounting or flush mounting unit cased in a metal wall mounting enclosure. The surface mounted outstation is also available as a lock door option.The Type A Outstation is a slick compact unit which offers easy access via a magnetic push catch door and a unique front levelling system allowing the back box to be mounted at a slight angle whilst still retaining a true front face and door.Key FeaturesCompact designHigh volume ringerStatus LEDTelecoil for hearing impaired usersFull duplex operationMagnetic push catch for quick and easy accessVersatility the unit can be used on all EVCS systemsDual use the Type A Outstation can be used as a fire telephone or a disabled refuge call point

GBP 374.22
1

Morley EVCS-HSP Surface Type A Push Door Outstation

Morley EVCS-HSP Surface Type A Push Door Outstation

Morley EVCS-HSP Surface Type A Push Door OutstationThe Type A outstation is a monitored phone handset providing full duplex speech capability. The unit is available as a surface mounting or flush mounting unit cased in a metal wall mounting enclosure. The surface mounted outstation is also available as a lock door option.The Type A Outstation is a slick compact unit which offers easy access via a magnetic push catch door and a unique front levelling system allowing the back box to be mounted at a slight angle whilst still retaining a true front face and door. Available in red and Stainless Steel.Key FeaturesCompact designHigh volume ringerStatus LEDTelecoil for hearing impaired usersFull duplex operationMagnetic push catch for quick and easy accessVersatility the unit can be used on all EVCS systemsDual use the Type A Outstation can be used as a fire telephone or a disabled refuge call point

GBP 316.39
1

Morley PL-1000 Morley-IAS Plus Single Loop Control Panel Expandable To Two Loops

Morley PL-1000 Morley-IAS Plus Single Loop Control Panel Expandable To Two Loops

Morley PL-1000 Morley-IAS Plus Single Loop Control Panel Expandable To Two LoopsThe PL-1000 control panel includes Honeywells Advanced AP protocol which maximises the speed and efficiency of alarm detection as well as providing maximum information to the installer. The 4.3 480x272 pixel touchscreen provides an intuitive user interface via its menus with quick and easy system operation. The PL-1000 control panel allows full system configuration from the screen itself.The PL-1000 is a single loop addressable panel expandable to two loops with an optional loop card PL-LIB01S. Each loop supports 159 detectors and 159 input output modules.The analogue addressable PL-1000 is designed for small to medium sized installations. The PL-1000 is very easy to install and configure. The system is designed to manage both traditional wired field devices and Agile wireless equipment. Installation and commissioning time is reduced to a minimum since the user interface allows in few steps to commission and test field devices.Due to its size and power it is the ideal analogue addressable control panel for small to medium sites where maximum information is required from the installed devices. The control panel allows the identification of each of the intelligent sensors in order to verify the state of the system before carrying out any evacuation or transmission to the alarm receiving station or to the building management system.Key Features4.3 109.2 cm touchscreen graphical colour display 480 x 272 pixel resolution with back illumination and back-lit membrane buttonsMultiple language selectionsIntuitive colour event indication tab for an overview of system status at a glanceSimple DOT Matrix Cause Effect rule builderQuick configuration of the unit from the same displayOn-screen 16 Virtual Zonal LED indicators with event colour coding to increase situational awarenessSingle loop expandable to 2 loops. 318 addresses per loop 159 detector 159 ModulesCertified to EN54-2 EN54-4 EN54-13 LVD 62.368-12014A11Morley-IAS Advanced Protocol and enhanced Agile wireless features including on-screen device battery and signal strengthsIncludes serial communication ports for TPP including Connected Life Safety Services CLSS and repeaters

GBP 516.37
1

Morley MCP5A-RP02FF-01-B Manual Call Point With Flexible Element Built-In Isolator and Mounting Box

Morley MCP5A-RP02FF-01-B Manual Call Point With Flexible Element Built-In Isolator and Mounting Box

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.Morley MCP5A-RP02FF-01-B Manual Call Point With Flexible ElementBuilt-In Isolator and Mounting BoxInstallation efficiency flexibility and full compliancewith the latest standards are at the heart of the new MCP Indoor Call Pointrange.Installation time and ultimately cost are of paramountimportance to any fire or security installer. The MCP range directly reflectsthis need by providing a unique plug and play concept designed specificallyto reduce installation time. All new MCP products utilise a special terminalblock where all initial installation cabling is terminated. This terminal blockis then simply connected to the back of the MCP. Simple but effective with no re-terminationrequired and no time wasted.Through new standards and legislation both break glass andresettable operating elements can now be used within a manual call point. Toprovide you with the greatest flex-ability the new MCP range can beconfigured as either a break glass or resettable unit by simply changing fromone element to another. No other additional parts or alternative products needto be ordered.All MCP Indoor Call Point products also help preserve theintegrity of the overall system as illegal removal of the product lid willresult in the call point operating and the system going in to alarm.Key FeaturesComes with SR1T mounting box for surface mountingAddressableFlexible element

GBP 36.29
1

Morley DNRE Duct Detector Housing with B501AP Base

Morley DNRE Duct Detector Housing with B501AP Base

Morley DNRE Duct Detector Housing with B501AP BaseThe InnovairFlex DNRE intelligent non-relay photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints capable of mounting to a round or rectangular duct. These units can sense smoke in the most challenging conditions operating in airflow speeds of 1.5ms to 20.3msec temperatures of 20 to 70 degrees and a humidity range of 0 to 95 non-condensing.An improved cover design isolates the sensor head from the low-flow feature for simple maintenance. A cover tamper feature was added to indicate a trouble signal for a removed or improperly installed sensor cover. The InnovairFlex housing provides a 20mm conduit knockout and ample space to facilitate easy wiring and mounting of relay module.Key FeaturesPhotoelectric integrated low-flow technologyAir velocity rating from 1.5ms to 20.3secVersatile mounting options square or rectangular configurationBroad ranges for operating temperature 20 to 70 degree and humidity 0-95 non-condensingPatented sampling tube installs from front or back of the detector with no tools requiredNew cover temper signalIncreased wiring space with a newly added 20mm conduit knockoutAvailable space within housing to accommodate mounting of relay moduleEasily accessible code wheels on sensor head sold separatelyClear cover for convenient visual inspectionFor MI-PSE-S2 or MI-PSE-S2I DetectorsRequires DSTXX duct sampling tube

GBP 194.16
1

Morley HLS-RES-V3AI Response Aid Paging System V3

Morley HLS-RES-V3AI Response Aid Paging System V3

Morley HLS-RES-V3AI Response Aid Paging System V3The Response Paging System offers the latest innovations in wireless paging and monitoring. Its a cost effective and flexible system that provides the ability to quickly respond to activated alarms.The Response Aid paging unit consists of a wall-mounted HIPS High Impact Polystyrene enclosure containing a 4 watt transmitter enclosed in an aluminium surround. It includes a 240-volt 3-pin plug status indicator LED for Power and Transmission and straight wire antenna connected to the top of the enclosure using a 38 BNC bayonet connection.The unit has the capability of 15 dry contacts 7 inputs and 8 outputs. The Input contacts can be set to normally open NO or normally closed NC with the Output contacts being normally open NO. An input contact on one paging transmitter can trigger and output contact on another Response paging transmitter on the same site widening the scope and application that Response Plus can be installed.In the event of transmitter failure power supply failure and a loss in power output from the transmitter there is a Fault output normally closed alarm accessible via internal terminal header. This is to be connected back to the fire alarm panel to alert the fire alarm panel of any failures. The system includes battery backup as standard for a minimum 24 hours after mains power failures. There is a low voltage detection sounder which will alert in the event of low battery.The Response Aid transmitter is fully site programmable via the internal LCD display and mini keypad. The transmitter can be programmed to support and range of Honeywell fire control panel platforms and additional 3rd party protocols.

GBP 2848.23
1