53 results (0,17659 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Moravia Cable Duct, Small, For Cables Up To 45mm, Yellow

Moravia Cable Duct, Small, For Cables Up To 45mm, Yellow

Cable duct, small, for cables up to 45 mm, yellow. Supplied = assembled. Length = 1200 mm. Width = 210 mm. Height = 65 mm. Colour = yellow. Material = hard rubber. Weight = 12 kg. Finish = profiled. Function = for hoses and cables with diameter up to 45 mm. Product type = cable ducts. Can be driven over without difficulty and protects cables and hoses. Flexible, high strength rubber compound. Profiled, anti-slip surface makes it easy to drive over. Bottom side with anti-slip rubber strips. Can withstand truck and stacker traffic. Signal effect due to yellow and black sections. 3 cable channels: 2 x 20 and 1 x 45 mm. Dimensions: L x W x H 1200 x 210 x 65 mm.

GBP 309.99
1

Moravia Topstop-Eco 15RE Speed Reduction Ramp - End Section - 250mm W x 30mm H - Fixing Included - Yellow

Moravia Topstop-Eco 15RE Speed Reduction Ramp - End Section - 250mm W x 30mm H - Fixing Included - Yellow

TOPSTOP-ECO Speed Reduction Ramps are the cost effective method of reducing traffic speeds. They are supplied in three versions to reduce speeds to 5mph, 10mph and 15mph respectively and are extensively used in potentially hazardous situations such as exit and entrance ways, bends, loading bays, weigh bridges, schools, manufacturing and office sites etc. Manufactured from recycled plastics the TOPSTOP-ECO is supplied in yellow and black sections with cats eyes incorporated into the 5Re and 10RE sections for night time visibility. Available in three heights: TOPSTOP-ECO 5RE - Height 70 mm for speeds up to 5 mph TOPSTOP-ECO 10RE - Height 50 mm for speeds up to 10 mph TOPSTOP-ECO 15RE - Height 30 mm for speeds up to 15 mph Please Note: The product can be delivered to UK mainland only.

GBP 23.99
1

Moravia Bollard, For Bolting In Place, Height 965mm, Hot Dip Galvanised And Coated Yellow

Moravia Bollard, For Bolting In Place, Height 965mm, Hot Dip Galvanised And Coated Yellow

Bollard, for bolting in place, height 965 mm, hot dip galvanised and coated yellow. Supplied = assembled. Overall height = 965 mm. Height above ground = 965 mm. Post dimensions = 159 mm. Material = steel. Finish = hot dip galvanised and additionally coated in colour. Post colour = yellow, black. Design = self-righting. Type of mounting = for bolting in place. Mounting = with base plate. Place of use = indoor and outdoor use. Base plate dimensions = 270x10 mm. Base plate design = round. Tube form = round. Weight = 25 kg. Product type = bollards/barrier posts made of steel. Reduces damage to vehicles and stock. Self-righting. The internal steel spiral spring, together with the elastic polyurethane buffer, absorb the occurring impact forces (progressive force absorption) Minimises damage to the bollard and vehicle (forklift truck, lorry) The bollard tilts a maximum of 25 and returns to its initial position automatically. Bollard made of high quality steel, 159 mm, wall thickness 4.5 mm. Base plate 270 mm x 10 mm. The bollard must be bolted in place - Please see accessories for a ground sleeve for embedding in concrete.

GBP 1099.99
1

Moravia Bollard, For Bolting In Place, Height 665mm, Hot Dip Galvanised And Coated Yellow

Moravia Bollard, For Bolting In Place, Height 665mm, Hot Dip Galvanised And Coated Yellow

Bollard, for bolting in place, height 665 mm, hot dip galvanised and coated yellow. Supplied = assembled. Overall height = 665 mm. Height above ground = 665 mm. Post dimensions = 159 mm. Material = steel. Finish = hot dip galvanised and additionally coated in colour. Post colour = yellow, black. Design = self-righting. Type of mounting = for bolting in place. Mounting = with base plate. Place of use = indoor and outdoor use. Base plate dimensions = 270x10 mm. Base plate design = round. Tube form = round. Weight = 17 kg. Product type = bollards/barrier posts made of steel. Reduces damage to vehicles and stock. Self-righting. The internal steel spiral spring, together with the elastic polyurethane buffer, absorb the occurring impact forces (progressive force absorption) Minimises damage to the bollard and vehicle (forklift truck, lorry) The bollard tilts a maximum of 25 and returns to its initial position automatically. Bollard made of high quality steel, 159 mm, wall thickness 4.5 mm. Base plate 270 mm x 10 mm. The bollard must be bolted in place - Please see accessories for a ground sleeve for embedding in concrete.

GBP 999.99
1

Moravia Column And Post Guard, Height 550mm, From 86 - 120mm, WxD 162 X 115mm

Moravia Column And Post Guard, Height 550mm, From 86 - 120mm, WxD 162 X 115mm

Column and post guard, height 550 mm, from 86 - 120 mm, WxD 162 x 115 mm. Supplied = pre-assembled, final assembly by customer. Overall width = 162 mm. Overall height = 550 mm. Colour = yellow. Material = plastic. Type of mounting = clamped using velcro. Weight = 1 kg. Place of use = indoor and outdoor use. Overall depth = 115 mm. Protects the floor as it is not bolted in place. Elastic and resilient. Assembled without tools. EN 15512 compliant. Tested to German technical standards (TV) Collision protection component made of yellow, high-quality polyethylene (MDPE) for the protection of shelf uprights Additionally secured by two Velcro strips - prevent unintentional slipping. Quick to assemble and disassemble (e.g. for annual shelf unit inspection)

GBP 139.99
1

Moravia Column And Post Guard, Height 550mm, From 60 - 85mm, WxD 126 X 104mm

Moravia Column And Post Guard, Height 550mm, From 60 - 85mm, WxD 126 X 104mm

Column and post guard, height 550 mm, from 60 - 85 mm, WxD 126 x 104 mm. Supplied = pre-assembled, final assembly by customer. Overall width = 126 mm. Overall height = 550 mm. Colour = yellow. Material = plastic. Type of mounting = clamped using velcro. Weight = 0.8 kg. Place of use = indoor and outdoor use. Overall depth = 104 mm. Protects the floor as it is not bolted in place. Elastic and resilient. Assembled without tools. EN 15512 compliant. Tested to German technical standards (TV) Collision protection component made of yellow, high-quality polyethylene (MDPE) for the protection of shelf uprights Additionally secured by two Velcro strips - prevent unintentional slipping. Quick to assemble and disassemble (e.g. for annual shelf unit inspection)

GBP 119.99
1

Moravia Impact Protection Barrier, To Bolt In Place, Length 1500mm

Moravia Impact Protection Barrier, To Bolt In Place, Length 1500mm

Impact protection barrier, to bolt in place, length 1500 mm. Supplied = assembled. Overall length = 1500 mm. Overall width = 160 mm. Overall height = 200 mm. Colour = yellow. Material = steel. Finish = plastic coated. Type of mounting = with base plate for bolting in place. Model = straight. Base plate length = 160 mm. Base plate width = 140 mm. Weight = 13.5 kg. Panel thickness = 3 mm. Tube diameter = 76 mm. Base plate height = 10 mm. Place of use = indoor use. Height above ground = 200 mm. Safe delineation and protection for traffic routes and inventory. With cable guide - to protect cables and lines. Robust steel construction. A newly developed steel guidance system for isolating traffic routes, for protecting machinery, technical equipment, work areas and walkways The thick walled tubular steel is connected to a solid base plate by metal bars. Black plastic caps (see Accessories further down) form the end sections. It is suitable for two types of use: as an individual barrier or in an infinite design by using an adapter that connects the tubes to each other. With additional cable guide: protects cables, pressure hoses and lines up to 48 mm, which can be guided through the recesses in the bars.

GBP 699.99
1

Moravia Impact Protection Barrier, To Bolt In Place, Length 2000mm

Moravia Impact Protection Barrier, To Bolt In Place, Length 2000mm

Impact protection barrier, to bolt in place, length 2000 mm. Supplied = assembled. Overall length = 2000 mm. Overall width = 160 mm. Overall height = 200 mm. Colour = yellow. Material = steel. Finish = plastic coated. Type of mounting = with base plate for bolting in place. Model = straight. Base plate length = 160 mm. Base plate width = 140 mm. Weight = 19 kg. Panel thickness = 3 mm. Tube diameter = 76 mm. Base plate height = 10 mm. Place of use = indoor use. Height above ground = 200 mm. Safe delineation and protection for traffic routes and inventory. With cable guide - to protect cables and lines. Robust steel construction. A newly developed steel guidance system for isolating traffic routes, for protecting machinery, technical equipment, work areas and walkways The thick walled tubular steel is connected to a solid base plate by metal bars. Black plastic caps (see Accessories further down) form the end sections. It is suitable for two types of use: as an individual barrier or in an infinite design by using an adapter that connects the tubes to each other. With additional cable guide: protects cables, pressure hoses and lines up to 48 mm, which can be guided through the recesses in the bars.

GBP 799.99
1

Moravia Impact Protection Barrier, To Bolt In Place, Inside Corner

Moravia Impact Protection Barrier, To Bolt In Place, Inside Corner

Impact protection barrier, to bolt in place, inside corner. Supplied = assembled. Overall length = 638 mm. Overall width = 638 mm. Overall height = 200 mm. Colour = yellow. Material = steel. Finish = plastic coated. Type of mounting = with base plate for bolting in place. Model = inside corner. Base plate length = 160 mm. Base plate width = 140 mm. Weight = 11 kg. Panel thickness = 3 mm. Tube diameter = 76 mm. Base plate height = 10 mm. Place of use = indoor use. Height above ground = 200 mm. Safe delineation and protection for traffic routes and inventory. With cable guide - to protect cables and lines. Robust steel construction. A newly developed steel guidance system for isolating traffic routes, for protecting machinery, technical equipment, work areas and walkways The thick walled tubular steel is connected to a solid base plate by metal bars. Black plastic caps (see Accessories further down) form the end sections. It is suitable for two types of use: as an individual barrier or in an infinite design by using an adapter that connects the tubes to each other. With additional cable guide: protects cables, pressure hoses and lines up to 48 mm, which can be guided through the recesses in the bars.

GBP 559.99
1

Moravia Impact Protection Barrier, To Bolt In Place, Length 1000mm

Moravia Impact Protection Barrier, To Bolt In Place, Length 1000mm

Impact protection barrier, to bolt in place, length 1000 mm. Supplied = assembled. Overall length = 1000 mm. Overall width = 160 mm. Overall height = 200 mm. Colour = yellow. Material = steel. Finish = plastic coated. Type of mounting = with base plate for bolting in place. Model = straight. Base plate length = 160 mm. Base plate width = 140 mm. Weight = 11 kg. Panel thickness = 3 mm. Tube diameter = 76 mm. Base plate height = 10 mm. Place of use = indoor use. Height above ground = 200 mm. Safe delineation and protection for traffic routes and inventory. With cable guide - to protect cables and lines. Robust steel construction. A newly developed steel guidance system for isolating traffic routes, for protecting machinery, technical equipment, work areas and walkways The thick walled tubular steel is connected to a solid base plate by metal bars. Black plastic caps (see Accessories further down) form the end sections. It is suitable for two types of use: as an individual barrier or in an infinite design by using an adapter that connects the tubes to each other. With additional cable guide: protects cables, pressure hoses and lines up to 48 mm, which can be guided through the recesses in the bars.

GBP 399.99
1

Moravia Impact Protection Barrier, To Bolt In Place, Outside Corner

Moravia Impact Protection Barrier, To Bolt In Place, Outside Corner

Impact protection barrier, to bolt in place, outside corner. Supplied = assembled. Overall length = 638 mm. Overall width = 638 mm. Overall height = 200 mm. Colour = yellow. Material = steel. Finish = plastic coated. Type of mounting = with base plate for bolting in place. Model = outside corner. Base plate length = 160 mm. Base plate width = 140 mm. Weight = 11 kg. Panel thickness = 3 mm. Tube diameter = 76 mm. Base plate height = 10 mm. Place of use = indoor use. Height above ground = 200 mm. Safe delineation and protection for traffic routes and inventory. With cable guide - to protect cables and lines. Robust steel construction. A newly developed steel guidance system for isolating traffic routes, for protecting machinery, technical equipment, work areas and walkways The thick walled tubular steel is connected to a solid base plate by metal bars. Black plastic caps (see Accessories further down) form the end sections. It is suitable for two types of use: as an individual barrier or in an infinite design by using an adapter that connects the tubes to each other. With additional cable guide: protects cables, pressure hoses and lines up to 48 mm, which can be guided through the recesses in the bars.

GBP 559.99
1

Moravia Black Bull Protection Guard - Indoor Use - 350 x 375mm - Yellow

Moravia Black Bull Protection Guard - Indoor Use - 350 x 375mm - Yellow

Manufactured from seamless high quality tube, these guards are bent as one piece to provide strong and effective collision protection in vehicle routes, work and inventory areas. They can be used for separating vehicle and pedestrian routes, protect machinery, pillars, racking, loading ramps etc. Tube: 76mm x 3mm Wall. Base Plate: 160 x 140 x 10mm. Powder Coated Yellow. Please Note: The product can be delivered to UK mainland only.

GBP 143.99
1

Moravia BLACK BULL Cross Bar For Corner Posts (45 Angle - Single Sided) - Length 1500mm, 74 X 52 X 5mm

Moravia BLACK BULL Cross Bar For Corner Posts (45 Angle - Single Sided) - Length 1500mm, 74 X 52 X 5mm

BLACK BULL cross bar for corner posts (45 angle, single sided) , WxH 52 x 74 mm, length 1500 mm, yellow, 74 x 52 x 5 mm. Supplied = pre-assembled, final assembly by customer. Overall length = 1500 mm. Overall width = 52 mm. Overall height = 74 mm. Colour = yellow. Weight = 2.25 kg. Panel thickness = 5 mm. Place of use = indoor and outdoor use. Combines the best features of steel and plastic. Non-marking due to spring loaded special cushions made of PU foam. TV tested in accordance with DGUV 108-007. Low material fatigue. Can be adapted to suit the object. Hybrid railing that combines steel and plastic with each other. Consisting of steel posts that yield and plastic cross rails that yield (see Combinations) The matching posts, cross bars and doors can be found under Combinations.

GBP 239.99
1

Moravia BLACK BULL Cross Bar For Corner Posts (45 Angle - Single Sided) - Length 2300mm, 76 X 52 X 5mm

Moravia BLACK BULL Cross Bar For Corner Posts (45 Angle - Single Sided) - Length 2300mm, 76 X 52 X 5mm

BLACK BULL cross bar for corner posts (45 angle, single sided) , WxH 52 x 74 mm, length 2300 mm, yellow, 76 x 52 x 5 mm. Supplied = assembled. Overall length = 2300 mm. Overall width = 52 mm. Overall height = 74 mm. Colour = yellow. Weight = 3.5 kg. Panel thickness = 5 mm. Place of use = indoor and outdoor use. Combines the best features of steel and plastic. Non-marking due to spring loaded special cushions made of PU foam. TV tested in accordance with DGUV 108-007. Low material fatigue. Can be adapted to suit the object. Hybrid railing that combines steel and plastic with each other. Consisting of steel posts that yield and plastic cross rails that yield (see Combinations) The matching posts, cross bars and doors can be found under Combinations.

GBP 259.99
1

Moravia BLACK BULL Cross Bar For Corner Posts (45 Angle - Single Sided) - Length 2000mm, 75 X 52 X 5mm

Moravia BLACK BULL Cross Bar For Corner Posts (45 Angle - Single Sided) - Length 2000mm, 75 X 52 X 5mm

BLACK BULL cross bar for corner posts (45 angle, single sided) , WxH 52 x 74 mm, length 2000 mm, yellow, 75 x 52 x 5 mm. Supplied = pre-assembled, final assembly by customer. Overall length = 2000 mm. Overall width = 52 mm. Overall height = 74 mm. Colour = yellow. Weight = 3 kg. Panel thickness = 5 mm. Place of use = indoor and outdoor use. Combines the best features of steel and plastic. Non-marking due to spring loaded special cushions made of PU foam. TV tested in accordance with DGUV 108-007. Low material fatigue. Can be adapted to suit the object. Hybrid railing that combines steel and plastic with each other. Consisting of steel posts that yield and plastic cross rails that yield (see Combinations) The matching posts, cross bars and doors can be found under Combinations.

GBP 239.99
1

Moravia BLACK BULL Hybrid Crash Protection Railing, WxH 52 X 74mm, Cross Bar, Length 2000mm

Moravia BLACK BULL Hybrid Crash Protection Railing, WxH 52 X 74mm, Cross Bar, Length 2000mm

BLACK BULL hybrid crash protection railing, WxH 52 x 74 mm, cross bar, length 2000 mm. Supplied = pre-assembled, final assembly by customer. Overall length = 2000 mm. Overall width = 52 mm. Overall height = 74 mm. Colour = yellow. Weight = 3 kg. Panel thickness = 5 mm. Place of use = indoor and outdoor use. Combines the best features of steel and plastic. Non-marking due to spring loaded special cushions made of PU foam. TV tested in accordance with DGUV 108-007. Low material fatigue. Can be adapted to suit the object. Hybrid railing that combines steel and plastic with each other. Consisting of steel posts that yield and plastic cross rails that yield. Base plate: 200 x 200 x 10 mm Cross bar: 74 x 52 x 5 mm The matching posts, cross bars for the corners and doors can be found under Combinations.

GBP 219.99
1

Moravia BLACK BULL Hybrid Crash Protection Railing, WxH 52 X 74mm, Cross Bar, Length 2300mm

Moravia BLACK BULL Hybrid Crash Protection Railing, WxH 52 X 74mm, Cross Bar, Length 2300mm

BLACK BULL hybrid crash protection railing, WxH 52 x 74 mm, cross bar, length 2300 mm. Supplied = pre-assembled, final assembly by customer. Overall length = 2300 mm. Overall width = 52 mm. Overall height = 74 mm. Colour = yellow. Weight = 3.5 kg. Panel thickness = 5 mm. Place of use = indoor and outdoor use. Combines the best features of steel and plastic. Non-marking due to spring loaded special cushions made of PU foam. TV tested in accordance with DGUV 108-007. Low material fatigue. Can be adapted to suit the object. Hybrid railing that combines steel and plastic with each other. Consisting of steel posts that yield and plastic cross rails that yield. Base plate: 200 x 200 x 10 mm Cross bar: 74 x 52 x 5 mm The matching posts, cross bars for the corners and doors can be found under Combinations.

GBP 249.99
1