26 results (0,17864 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Kobe Belt & Disc Sander 370W

Kobe Belt & Disc Sander 370W

SBD370 Light enough to be semi-portable, yet its robust construction makes it ideal for workshop use. It has a disc sanding table suitable for finish sanding and curve sanding. The disc table also tilts to 45 degrees for bevel sanding and when used with the mitring guide is ideal for sanding compound angles. The sanding belt is ideal flat surface sanding but tilts up to 90 degrees for end sanding. Can be directly connected to dust extraction (highly recommended) by way of the 61mm outlet port on the end of the sander. Power input: 370W. Sanding Disc: 150mm PSA (Stikit) Sanding Belt: 100 x 914mm (4" x 36") Weight: 17kg

GBP 139.99
1

Kobe FAG050M 50mm Mini Grinder

Kobe FAG050M 50mm Mini Grinder

FAG050m For metal dressing, rust removal, weld preparation and automotive bodywork fabrication in hard to reach areas. Speed regulator. Safety release throttle. Heavy duty disc guard. Side exhaust. Ball bearing construction. Supplied with: 2x A60 (KEN230-0040K), 1x A80 (KEN230-0050K) and 1x A120 (KEN230-0060K) 50mm grinding discs. Disc size: 50 x 4 x 9.6mm (2" x 5/32" x 3/8"). Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 3/8" (10mm). Air pressure: 90psi/6.3bar. Air consumption: 4cfm*. Sound pressure level: 83dBA. Sound power level: 92dBA. Vibration level: 1.7m/s2. Overall length: 140mm. *Based on a 15 second cycle per minute average use.

GBP 139.99
1

Kobe FCT076 76mm Reversible Cut-off Tool

Kobe FCT076 76mm Reversible Cut-off Tool

FCT076 For cutting auto panels, light sheet metal, fibreglass, nuts and bolts. Powerful 0.5HP motor. Speed regulator. Safety release throttle. Rear exhaust. Rotating air inlet. Reverse feature to allow for sparks to be deflected away from the work. Ball bearing construction for long tool life. Supplied with one 76mm cutting disc (KEN230-0020K). Disc size: 76 x 1.8 x 9.6mm (3 x 1/16 x 3/8). Minimum air hose size (ID): 3/8 (10mm). Air inlet thread: 1/4 NPT. Air pressure: 90psi/6.2bar. Air consumption: 4cfm*. Sound pressure level: 98dBA. Sound power level: 103dBA. Vibration level: 0.5m/s2. Overall length: 185mm. *Based on a 15 second cycle per minute average use.

GBP 99.99
1

Kobe FGA120G 115mm Air Angle Grinder with Composite Handle Grip

Kobe FGA120G 115mm Air Angle Grinder with Composite Handle Grip

Disc size: 115mm (4.5??). Spindle size: M14 x 2.0mm. Free speed: 10,000rpm (Governed). Air inlet thread: 1/4?? NPT. Minimum air hose size: 10mm (3/8??). Air pressure: 6.2bar (90psi). Motor power: 0.7hp. Air consumption: 113Ltr/m* (4CFM). Sound power level: 92dB(A). Sound pressure/noise level: 89dB(A). Vibration level: 1.2 m/s2. Overall length: 240mm. Net weight: 1.95kg. *Based on a 15 second cycle per minute average use.

GBP 199.99
1

Kobe GA1807L 180mm Heavy Duty Angle Grinder

Kobe GA1807L 180mm Heavy Duty Angle Grinder

GA1807L Supplied with front exhaust, safety lever throttle, auxiliary side handle and adjustable safety guard. For grinding only Free speed: 7000rpm. Grinding disc size: 180x6.3x22.2mm. Air inlet thread: 1/4" NPT. Air hose size (ID): 10mm. Air pressure: 90PSI. Air consumption: 6,1/2 CFM* Overall length: 340mm. Weight: 3.6kg. Sound power level: 109dB(A). Sound Pressure/ Noise level: 103dB(A). Vibration level: 2.6m/s. *Based on a 15 second cycle per minute average use.

GBP 229.99
1

Kobe 75MM/3" Dia Hook-N-Loop Backed Discs P320 (Pk-25)

Kobe 75MM/3" Dia Hook-N-Loop Backed Discs P320 (Pk-25)

High quality, long lasting hook n loop backed sanding discs. Available in a range of sizes and abrasive grades to suit any task. Features and Benefits No spanners required 100% of disc can be used, so material removal rate is therefore increased Can be repeatedly removed and re-applied Can be used wet or dry Typical Applications Silicon carbide abrasive especially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes.

GBP 18.99
1

Kobe 50MM/2" Dia Veldro Backed Sanding Discs P600 Pk-25

Kobe 50MM/2" Dia Veldro Backed Sanding Discs P600 Pk-25

High quality, long lasting hook n loop backed sanding discs. Available in a range of sizes and abrasive grades to suit any task. Features and Benefits No spanners required 100% of disc can be used, so material removal rate is therefore increased Can be repeatedly removed and re-applied Can be used wet or dry Typical Applications Silicon carbide abrasive especially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes.

GBP 10.99
1

Kobe 50MM/2" Dia Hook-N-Loop Backed Discs P320 (Pk-25)

Kobe 50MM/2" Dia Hook-N-Loop Backed Discs P320 (Pk-25)

High quality, long lasting hook n loop backed sanding discs. Available in a range of sizes and abrasive grades to suit any task. Features and Benefits No spanners required 100% of disc can be used, so material removal rate is therefore increased Can be repeatedly removed and re-applied Can be used wet or dry Typical Applications Silicon carbide abrasive especially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes.

GBP 10.99
1

Kobe 50MM/2" Dia Hook-N-Loop Backed Discs P400 (Pk-25)

Kobe 50MM/2" Dia Hook-N-Loop Backed Discs P400 (Pk-25)

High quality, long lasting hook n loop backed sanding discs. Available in a range of sizes and abrasive grades to suit any task. Features and Benefits No spanners required 100% of disc can be used, so material removal rate is therefore increased Can be repeatedly removed and re-applied Can be used wet or dry Typical Applications Silicon carbide abrasive especially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes.

GBP 10.99
1

Kobe 75MM/3" Dia Hook-N-Loop Backed Discs P400 (Pk-25)

Kobe 75MM/3" Dia Hook-N-Loop Backed Discs P400 (Pk-25)

High quality, long lasting hook n loop backed sanding discs. Available in a range of sizes and abrasive grades to suit any task. Features and Benefits No spanners required 100% of disc can be used, so material removal rate is therefore increased Can be repeatedly removed and re-applied Can be used wet or dry Typical Applications Silicon carbide abrasive especially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes.

GBP 19.99
1

Kobe 75MM/3" Dia Hook-N-Loop Backed Discs P600 (Pk-25)

Kobe 75MM/3" Dia Hook-N-Loop Backed Discs P600 (Pk-25)

High quality, long lasting hook n loop backed sanding discs. Available in a range of sizes and abrasive grades to suit any task. Features and Benefits No spanners required 100% of disc can be used, so material removal rate is therefore increased Can be repeatedly removed and re-applied Can be used wet or dry Typical Applications Silicon carbide abrasive especially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes.

GBP 19.99
1

Kobe SR500 1/2" Square Drive Ratchet Speed Wrench

Kobe SR500 1/2" Square Drive Ratchet Speed Wrench

SR375 3/8" square drive, 10mm bolt capacity. Noise Level: 89dBASound Power: 96dBAVibration: 4.0m/sSR500 1/2" square drive, 13mm bolt capacity. Noise Level: 89dBASound Power: 89dBAVibration: 4.0m/sBoth:Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work, front exhaust. Free speed: 150rpm.Air inlet thread: 1/4 NPT.Minimum air hose size (ID): 10mm (3/8).Air pressure: 6.2bar/90psi.Air consumption: 4cfm* (113ltr/m).Torque: 50ft/lbs.Overall length: 255mm.*Based on a 15 second cycle per minute average use.

GBP 40.99
1

Kobe GA1211L 115mm/4.1/2" Angle Grinder

Kobe GA1211L 115mm/4.1/2" Angle Grinder

GA1211L Suitable for grinding, cutting-off and sanding. Safety lever throttle. Supplied with auxiliary side handle, flanges and spanners. 115 x 3 x 22mm cut off disc. Air inlet thread: 1/4 NPT. Spindle thread: M10 x 1.5mm. Minimum air hose size: 10mm (3/8). Air pressure: 6.3bar (90psi). Air consumption: 6cfm* (216ltr/min). Motor power: 0.7hp. Sound pressure level: 89dBA. Sound power level: 96dBA. Vibration level: 4.0m/s2. Overall length: 240mm. *Based on a 15 second cycle per minute average use.

GBP 109.99
1

Kobe SR375 3/8" Square Drive Ratchet Speed Wrench

Kobe SR375 3/8" Square Drive Ratchet Speed Wrench

SR375 3/8" square drive, 10mm bolt capacity. Noise Level: 89dBASound Power: 96dBAVibration: 4.0m/sSR500 1/2" square drive, 13mm bolt capacity. Noise Level: 89dBASound Power: 89dBAVibration: 4.0m/sBoth:Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work, front exhaust. Free speed: 150rpm.Air inlet thread: 1/4 NPT.Minimum air hose size (ID): 10mm (3/8).Air pressure: 6.2bar/90psi.Air consumption: 4cfm* (113ltr/m).Torque: 50ft/lbs.Overall length: 255mm.*Based on a 15 second cycle per minute average use.

GBP 35.99
1

Kobe GA1011L 100mm/4" Angle Grinder

Kobe GA1011L 100mm/4" Angle Grinder

GA1011L Adjustable safety guard, safety lever throttle. Supplied with auxiliary side handle, flanges and spanners, lightweight and compact. 100 x 3 x 16mm cut-off disc. Air inlet thread: 1/4 NPT. Spindle thread: 3/8 - 24. Minimum air hose size: 10mm (3/8). Air pressure: 6.3bar (90psi). Motor power: 0.7hp. Air consumption: 6cfm* (216ltr/min). Sound power level: 89dBA. Sound pressure/noise level: 96dBA. Vibration level: 4.0m/s2. Overall length: 230mm. *Based on a 15 second cycle per minute average use.

GBP 99.99
1

Kobe Multi-tool Accessory Kit 53 Piece

Kobe Multi-tool Accessory Kit 53 Piece

Fitted plastic case containing 53 piece multi-tool kit for a range of surface cleaning and polishing tasks. Contents: 1x silicon carbide sanding wheel with 1/8" diameter shank, 1x aluminium oxide sanding wheel with 1/8" diameter shank, 1x holder 1/4" x 1/2", 1x holder 1/2" x 1/2", 1x mandrel shank dia: 1/8", 1x nylon end brush, 1x wire cup brush, 2x grinding wheel 1/8" x 13/16", 30x cutting disc 1/32" x 15/16", 6x sanding band 1/2" x 1/2", 8x sanding band 1/4" x 1/2".

GBP 4.99
1