295 results (0,44671 seconds)

Show all filters

Brand

Colour

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Kennedy Spot Weld Chisel & Bar

Kennedy Spot Weld Chisel & Bar

The Right Angled Seam Chisel And L Bar has been specially designed by Kennedy Tools for the separation of hard to reach spot welds and bonded panels as well as coping with the many traditional uses for pry & wrecking bars. Features & Benefits ?Easily separates hard-to-reach spot welded or bonded panels ?Sharpened on three edges, the sharp end allows for penetration between the panels and both side edges allow for side impact to drive the panels apart without damage ?90 degrees end for use in hard-to-reach pinchweld areas ?Made from a super tough alloy steel ?Will save the technician up to 15 minutes per panel replacement The Right Angled Rascal Bar with three sharpened edges is designed to allow two-directional hammer use on quarter panels, rockers and any other pinchweld. The sharp end allows for penetration between the panels and the two lower edges allows for side impact to drive the panels apart. The chisel tip can be used for starting seam separation.

GBP 6.99
1

Kennedy 325mm Super Lever Pry Bar

Kennedy 325mm Super Lever Pry Bar

These multi-purpose tools can be used as a nail lifter, pry bar, adze or lever. Manufactured from heat treated carbon steel, the product is ideal for dismantling timber constructions, opening packing cases and removing nails. Available in two sizes to suit your needs. Features and Benefits Manufactured from heat treated carbon steel for durability Available in two sizes to suit your requirements Multi-purpose tool that has a wide range of applications such as a nail lifter, pry bar, adze or lever Typical Applications Construction Warehousing Automotive

GBP 4.99
1

Kennedy 375mm Super Lever Pry Bar

Kennedy 375mm Super Lever Pry Bar

These multi-purpose tools can be used as a nail lifter, pry bar, adze or lever. Manufactured from heat treated carbon steel, the product is ideal for dismantling timber constructions, opening packing cases and removing nails. Available in two sizes to suit your needs. Features and Benefits Manufactured from heat treated carbon steel for durability Available in two sizes to suit your requirements Multi-purpose tool that has a wide range of applications such as a nail lifter, pry bar, adze or lever Typical Applications Construction Warehousing Automotive

GBP 5.99
1

Kennedy 23'' Telescopic MAG Pick-up Tool with LED

Kennedy 23'' Telescopic MAG Pick-up Tool with LED

This magnetic pick up tool boasts a telescopic handle and flexible head aa well as magnets fitted to head and base. Fitted with an LED light, the product also features a knurled grip, pocket clip and is supplied with 4 x LR44 batteries and battery protector. Features and Benefits Telescopic nature allows the product to attract ferrous materials in awkward or confined spaces Knurled body improves user grip even if hands are greasy or oily Pen clip allows the product to be attached to your person Fitted with LED light to help you see the dropped magnetic materials Magnet has a pull force of 2.27kg to grip fasteners and small ferrous objects with ease Includes 4 x LR44 batteries and battery protector to allow you to begin working instantly Flexible head allows access into confined areas Typical Applications Garages Warehousing Workshops

GBP 8.49
1

Kennedy Translucent Pale Amber Hot Dip (Single Bar)

Kennedy Translucent Pale Amber Hot Dip (Single Bar)

Hot dip strippable plastic coating moulds itself around the component or tool to provide 100% coverage and protect against corrosion and impacts for up to ten years. The protected component can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Features and Benefits Easily moulds around tools and components Offers 100% coverage for effective protection against corrosion and impacts Long lasting protects for up to 10 years Components are easily identifiable thanks to the translucent coating Working temperature 130C to 160C (for optimum results 140C to 145C) Reusable for a cost effective solution Notes Each block measures (L)-150mm (H)-50mm (W)-80mm. Block weight - 0.50kg Warning Never directly apply heat to melt the protective dip, always use with a suitable melting pot.

GBP 8.39
1

Kennedy Magnetic Telescopic Pick-up Tool 695mm

Kennedy Magnetic Telescopic Pick-up Tool 695mm

With an impressive maximum lifting capacity of 4.5kg, this high power magnet pick up tool is designed for easy pick-up and release of metal objects. The permanent product can be used for scrap and ferrous debris littered around workshops, job sites and similar environments. Completed by a spring- loaded magnet release for simple release and disposal when ready. Features and Benefits Permanent magnet never needs to be remagnetised Spring-loaded magnet release makes easy work of releasing the collected debris when ready Has an impressive maximum lifting weight of 4.5kg of ferrous materials Integrated plastic handle allows for easy transportation and manoeuvrability Typical Applications Workshops Construction

GBP 6.49
1

Kennedy Single Bar Translucent Red Hot Dip

Kennedy Single Bar Translucent Red Hot Dip

Hot dip protective plastic coating moulds around the component or tool to provide 100% coverage and protect against impact and corrosion. Features and Benefits Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years Easy part identity through the translucent coating Simple to remove by peeling off Once removed, leaves behind a thin oil film to provide short term protection against corrosion Removed coatings may be reused saving cost Notes Each single block measures (L)-150mm (H)-50mm (W)-80mm Working temperature 130C to 160C (for optimum results 140C to 145C) Warnings Never directly apply heat to melt the protective dip Always use with a suitable melting pot

GBP 6.99
1

Kennedy 10" Wobble Extension Bar 3/8" Square Drive

Kennedy 10" Wobble Extension Bar 3/8" Square Drive

These wobble bars are suited for use in areas where clearance may be a problem, as the 'wobble' 3/8in. square drive can be used at an angle of up to 15. Available in three different sizes, each product is manufactured from high quality chrome vanadium with a fully polished finish. All products possess a knurled finger grip for bolstered control and grip. Features and Benefits Manufactured from chrome vanadium steel for maximum resilience Knurled finger grip improves user grip to deliver maximum torque Available in three varying lengths to suit your needs Effective way of accessing sockets that would otherwise be unattainable Typical Applications Automotive Engineering Plumbing

GBP 6.99
1

Kennedy Magnetic Pen-Type Telescopic Pick-up Tool 610mm

Kennedy Magnetic Pen-Type Telescopic Pick-up Tool 610mm

With an impressive maximum lifting capacity of 4.5kg, this high power magnet pick up tool is designed for easy pick-up and release of metal objects. The permanent product can be used for scrap and ferrous debris littered around workshops, job sites and similar environments. Completed by a spring- loaded magnet release for simple release and disposal when ready. Features and Benefits Permanent magnet never needs to be remagnetised Spring-loaded magnet release makes easy work of releasing the collected debris when ready Has an impressive maximum lifting weight of 4.5kg of ferrous materials Integrated plastic handle allows for easy transportation and manoeuvrability Typical Applications Workshops Construction

GBP 7.99
1

Kennedy Magnetic Adjustable Pen-Type Telescopic Pick-up Tool

Kennedy Magnetic Adjustable Pen-Type Telescopic Pick-up Tool

With an impressive maximum lifting capacity of 4.5kg, this high power magnet pick up tool is designed for easy pick-up and release of metal objects. The permanent product can be used for scrap and ferrous debris littered around workshops, job sites and similar environments. Completed by a spring- loaded magnet release for simple release and disposal when ready. Features and Benefits Permanent magnet never needs to be remagnetised Spring-loaded magnet release makes easy work of releasing the collected debris when ready Has an impressive maximum lifting weight of 4.5kg of ferrous materials Integrated plastic handle allows for easy transportation and manoeuvrability Typical Applications Workshops Construction

GBP 7.49
1

Kennedy 36" Flexible Pick-up Tool

Kennedy 36" Flexible Pick-up Tool

Boasting a four prong steel retractable claw, flexible steel stem with a spring loaded plunger to open and close jaws and a chrome plated and corrosion-resistant finish, these pick up tools are ideal for recovery of small objects. Suited for retrieval in hard to reach areas and environments in which it is important for health and safety to have a tidy and clear space. Features and Benefits Flexible spring steel stem allows the product to bend slightly to access hard to reach areas Corrosion resistant chrome plated finish protects the product from wear and tear Four pronged steel retractable claw offers sturdy and reliable hold and retrieval of small objects Available in two lengths to suit your preference Typical Applications Garages Warehouses Workshops

GBP 4.99
1

Kennedy 1/2" Square Drive x 150mm Impact Extension Bar

Kennedy 1/2" Square Drive x 150mm Impact Extension Bar

1/2in. drive impact extension bars manufactured from high quality chrome molybdenum steel with a black oxidised finish for increased tool lifespan. The permanent laser etched markings allow for quick and easy selection of the right sized tool for the job. Features and Benefits Increases the reach of impact wrench sockets and drivers High quality chrome molybdenum steel construction for durability Black oxide coating for prolonged tool lifespan Permanent laser etched markings for easy tool identification Available in various sizes to suit your needs Typical Applications Impact wrenches Industrial Workshop Automotive On-site

GBP 7.99
1

Kennedy 1/4" Square DR x 100mm (4") Impact External Bar

Kennedy 1/4" Square DR x 100mm (4") Impact External Bar

1/4in. square drive impact extension bars manufactured from high quality chrome molybdenum steel with a black oxidised finish for increased tool lifespan. The permanent laser etched markings allow for quick and easy selection of the right sized tool for the job. Features and Benefits Increases the reach of impact wrench sockets and drivers High quality chrome molybdenum steel construction for durability Black oxide coating for prolonged tool lifespan Permanent laser etched markings for easy tool identification Typical Applications Impact wrenches Industrial Workshop Automotive On-site

GBP 4.99
1