17 results (0,14161 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Kennedy Air Hydraulic Floor Standing Workshop Press 20- Tonne 2018 Version

Kennedy Air Hydraulic Floor Standing Workshop Press 20- Tonne 2018 Version

Ideal for pressing, bending and extruding. The Hydraulic pump can be manually operated or by compressed air connecting the airline supplied to an air supply line or direct to a compressor providing at least 8 - 9.5bar at 4cfm. Hydraulic gauge is included. Ideal for industrial and automotive applications. 20 Tonnes Sturdy steel frame with end braces and wide feet for extra stability. Work bed height is adjustable in 8 increments of 120mm, allowing large work pieces to be worked on with maximum flexibility. Capacity: 20 tonnes.

GBP 499.99
1

Kennedy Air Hydraulic Floor Standing Workshop Press 30- Tonne 2018 Version

Kennedy Air Hydraulic Floor Standing Workshop Press 30- Tonne 2018 Version

Ideal for pressing, bending and extruding. The Hydraulic pump can be manually operated or by compressed air connecting the airline supplied to an air supply line or direct to a compressor providing at least 8 - 9.5bar at 4cfm. Hydraulic gauge is included. Ideal for industrial and automotive applications. 20 Tonnes Sturdy steel frame with end braces and wide feet for extra stability. Work bed height is adjustable in 8 increments of 120mm, allowing large work pieces to be worked on with maximum flexibility. Capacity: 20 tonnes.

GBP 839.99
1

70x Kennedy 3/4"-16 UNF Hss-Ev Sp/Fltap-Oxidised

70x Kennedy 3/4"-16 UNF Hss-Ev Sp/Fltap-Oxidised

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 1990 and ISO 529 : 1975. Tolerance 2B. Oxidised finish (black): special heat treated finish gives resistance to rust and reduces metal to metal friction. Combined with a porous surface that gives optimum lubricant retention, work-generated heat is minimised, giving prolonged cutting edge life. Use on higher carbon steels cast materials high silicon aluminiums.

GBP 4199.30
1

70x Kennedy 3/4"-10 UNC Hss-Ev Sp/Fltap-Oxidised

70x Kennedy 3/4"-10 UNC Hss-Ev Sp/Fltap-Oxidised

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 1990 and ISO 529 : 1975. Tolerance 2B. Oxidised finish (black): special heat treated finish gives resistance to rust and reduces metal to metal friction. Combined with a porous surface that gives optimum lubricant retention, work-generated heat is minimised, giving prolonged cutting edge life. Use on higher carbon steels cast materials high silicon aluminiums.

GBP 3009.30
1

1500x Kennedy 1/4" Hex X 1/4" Square Drive Male Adapter 50mm

1500x Kennedy 1/4" Hex X 1/4" Square Drive Male Adapter 50mm

Universal 1/4" hex shank is compatible with standard quick-change chucks and hex drive systems, ensuring secure fitment in drills and drivers 1/4" Square drive output enables the use of square drive sockets with hex shank power tools, ideal for fastener installation and removal in tight or awkward spaces Robust 50mm length offers a balance between reach and control, providing enough clearance for working in recessed or confined areas while maintaining torque stability Solid steel construction allows for reliable performance during high-torque applications, including light mechanical, assembly, and maintenance work

GBP 2985.00
1

150x Kennedy 5.0MM 2FL Carbide Al-Karb Milling Cutter

150x Kennedy 5.0MM 2FL Carbide Al-Karb Milling Cutter

Short Series - 2 Flute - Metric Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these materials as the flute design allows maximum chip removal. Metric Tolerances Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050. Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

GBP 2158.50
1

50x Kennedy 16.0MM 2FL Carbide Al-Karb Milling Cutter

50x Kennedy 16.0MM 2FL Carbide Al-Karb Milling Cutter

Short Series - 2 Flute - Metric Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these materials as the flute design allows maximum chip removal. Metric Tolerances Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050. Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

GBP 3499.50
1

50x Kennedy 1/2" 2FL Carbide Al-Karb Milling Cutter

50x Kennedy 1/2" 2FL Carbide Al-Karb Milling Cutter

Short Series - 2 Flute - Inch Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these materials as the flute design allows maximum chip removal. Inch Tolerances Diameter: Over 1/16 ~ up to 1/4. Tolerance: +0.000, -0.002. Diameter: Over 1/4 ~ up to 1. Tolerance: +0.000, -0.003.

GBP 2299.50
1

110x Kennedy 5/8"-18 UNF Hss-Ev Sp/Pttap-Oxidised

110x Kennedy 5/8"-18 UNF Hss-Ev Sp/Pttap-Oxidised

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap rigidity. Manufactured to BS 949: Part 4: 1990 and ISO 529 : 1975. Tolerance 2B. Oxidised finish (black): special heat treated finish gives resistance to rust and reduces metal to metal friction. Combined with a porous surface that gives optimum lubricant retention, work-generated heat is minimised, giving prolonged cutting edge life. Use on higher carbon steels cast materials high silicon aluminiums.

GBP 4068.90
1

2000x Kennedy No.1x50mm Pozidriv Power Bit 1/4" Direct Drive

2000x Kennedy No.1x50mm Pozidriv Power Bit 1/4" Direct Drive

These Pozidriv bits are suited for professional uses as well as general-purpose DIY applications. Designed for use with power tools, the product is constructed from chrome-molybdenum steel and possesses a 1/4"" hex drive with a ball recess. Available in varying sizes to suit your requirements. Features and Benefits Ball recess helps avoid cam out and firmly holds the bit in place Available in varying sizes to suit your application Manufactured from robust chrome-molybdenum steel for product longevity Typical Applications Construction DIY Plumbing Electrical

GBP 660.00
1

2000x Kennedy No.3x38mm Pozidriv Power Bit 1/4" Direct Drive

2000x Kennedy No.3x38mm Pozidriv Power Bit 1/4" Direct Drive

These Pozidriv bits are suited for professional uses as well as general-purpose DIY applications. Designed for use with power tools, the product is constructed from chrome-molybdenum steel and possesses a 1/4"" hex drive with a ball recess. Available in varying sizes to suit your requirements. Features and Benefits Ball recess helps avoid cam out and firmly holds the bit in place Available in varying sizes to suit your application Manufactured from robust chrome-molybdenum steel for product longevity Typical Applications Construction DIY Plumbing Electrical

GBP 660.00
1

400x Kennedy No.2x50mm Pozidriv Power Bit 1/4" Direct Drive (PK-10)

400x Kennedy No.2x50mm Pozidriv Power Bit 1/4" Direct Drive (PK-10)

These Pozidriv bits are suited for professional uses as well as general-purpose DIY applications. Designed for use with power tools, the product is constructed from chrome-molybdenum steel and possesses a 1/4"" hex drive with a ball recess. Available in varying sizes to suit your requirements. Features and Benefits Ball recess helps avoid cam out and firmly holds the bit in place Available in varying sizes to suit your application Manufactured from robust chrome-molybdenum steel for product longevity Typical Applications Construction DIY Plumbing Electrical

GBP 836.00
1

Kennedy HBP010 Hydraulic Bench Press 10-TON

Kennedy HBP010 Hydraulic Bench Press 10-TON

Ideal for pressing, bending and extruding. Built for tough daily use in industrial and automotive workshops. Manufactured welded steel frame with two end braces for stability and a fully adjustable work bed providing flexibility and convenience. Fitted with a detachable pump and ram allowing hydraulics to be used for other purposes when the press is not being used. Hydraulic gauge included. Capacity: 10 tonnes. Weight: 47kg These hydraulic presses are ideal for assembly, straightening, fabrication, quality control, maintenance, product testing, bending, forming, punching and shearing. Model number HBP010. Capacity: 10 Tonne. Ram stroke: 150mm. Extension screw: 60mm. Max height of ram to table: 300mm. Min height of ram to table: 90mm. Table aperture: 140mm. Working table width: 360mm. Overall height: 895mm. Hydraulic gauge included: Yes. Weight: 47kg.

GBP 569.99
1

Kennedy 5:1 Torque Multiplier Max Torque 2700 NM

Kennedy 5:1 Torque Multiplier Max Torque 2700 NM

For use with a wide range of drive tools such as ratchet and torque wrenches, these torque multipliers are an easy way to multiply the torque applied to the input drive by 5 times. Each multiplier includes a straight reaction bar and reaction arm and is ideal for maintenance and servicing applications in automotive and construction industries. Supplied in a carry case, the product is available with either a 1/2in. or 3/4in. square drive to suit your needs. Features and Benefits Ideal for applications where no electrical or air supply is available Aids the loosening of nuts that are corroded or seized Accurate to within 4%, taking the uncertainty out of high torque tightening Supplied in a robust carry case for ease of storage, transportation, organisation and protection Available with either a 1/2in. or 3/4in. square drive input to suit your needs Typical Applications Production Line Manufacturing Automotive

GBP 599.99
1

Kennedy 5:1 Torque Multiplier Max Torque 1500 NM

Kennedy 5:1 Torque Multiplier Max Torque 1500 NM

For use with a wide range of drive tools such as ratchet and torque wrenches, these torque multipliers are an easy way to multiply the torque applied to the input drive by 5 times. Each multiplier includes a straight reaction bar and reaction arm and is ideal for maintenance and servicing applications in automotive and construction industries. Supplied in a carry case, the product is available with either a 1/2in. or 3/4in. square drive to suit your needs. Features and Benefits Ideal for applications where no electrical or air supply is available Aids the loosening of nuts that are corroded or seized Accurate to within 4%, taking the uncertainty out of high torque tightening Supplied in a robust carry case for ease of storage, transportation, organisation and protection Available with either a 1/2in. or 3/4in. square drive input to suit your needs Typical Applications Production Line Manufacturing Automotive

GBP 599.99
1