2.004 results (0,20303 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

KAISER + KRAFT GMBH Spring Loaded Truck D Anodised Finish Capacity 180 L with Smart Grip

KAISER + KRAFT GMBH Spring Loaded Truck D Anodised Finish Capacity 180 L with Smart Grip

Spring loaded truck D, anodised finish, capacity 180 l, with Smart Grip. Supplied = assembled. Max. load = 130 kg. Length = 855 mm. Width = 550 mm. Height = 1015 mm. Internal length = 740 mm. Internal width = 510 mm. Internal height = 485 mm. Capacity = 180 l. Side panel material = aluminium. Finish = anodised. Wheel type = solid rubber non-marking. Wheel fittings = 4 swivel castors 2 with wheel stops. Wheel diameter = 125 mm. Wheel bearing = roller bearing. Product type = container trucks. Anodised finish for better corrosion resistance. Two grip options available: ergonomic Quick Grip or space saving Smart Grip. Adjustment of the loading and unloading height for ergonomic work. Parallel base guidance, even when loaded on one side only. PVC bumpers on the upper edge of the trolley to protect it from impacts. Non-marking motion due to solid rubber tyres. Available with a smooth or anodised finish, the spring loaded truck comes with two grip options: Quick Grip and Smart Grip. The Quick Grip handle protrudes approx. 250 mm horizontally beyond the edge of the trolley and makes it safe and ergonomic to push, while the Smart Grip is designed to save space and protect the panel inside the edge of the trolley. With a constant loading and unloading height, the base sinks continuously when loaded and rises slowly when unloaded. Eight covered ball bearings are used on the spring loaded truck, which guarantees parallel and non-twisting guidance of the lowering base, even when it is only loaded on one side. Its ability to adapt to changes in weight makes it ideal for picking different goods with different weights. Panels and aluminium profiles are connected by clinching, making them very stable. Smooth side panels reduce the friction of the load, while the solid rubber tyres enable non-marking motion. The all round, hardwearing PVC bumper on the upper edge of the trolley provides additional protection for the load and protects the truck from impacts. Both handles for self-assembly, with pre-drilled holes in the truck, including fastening material. The anodised finish lends the aluminium a higher level of corrosion resistance and makes the truck more resistant to abrasion and wear.

GBP 1699.99
1

KAISER + KRAFT GMBH Spring Loaded Truck D Anodised Finish Capacity 380 L with Smart Grip

KAISER + KRAFT GMBH Spring Loaded Truck D Anodised Finish Capacity 380 L with Smart Grip

Spring loaded truck D, anodised finish, capacity 380 l, with Smart Grip. Supplied = assembled. Max. load = 130 kg. Length = 1115 mm. Width = 690 mm. Height = 1005 mm. Internal length = 1000 mm. Internal width = 650 mm. Internal height = 530 mm. Capacity = 380 l. Side panel material = aluminium. Finish = anodised. Wheel type = solid rubber non-marking. Wheel diameter = 125 mm. Wheel bearing = roller bearing. Product type = container trucks. Anodised finish for better corrosion resistance. Two grip options available: ergonomic Quick Grip or space saving Smart Grip. Adjustment of the loading and unloading height for ergonomic work. Parallel base guidance, even when loaded on one side only. PVC bumpers on the upper edge of the trolley to protect it from impacts. Non-marking motion due to solid rubber tyres. Available with a smooth or anodised finish, the spring loaded truck comes with two grip options: Quick Grip and Smart Grip. The Quick Grip handle protrudes approx. 250 mm horizontally beyond the edge of the trolley and makes it safe and ergonomic to push, while the Smart Grip is designed to save space and protect the panel inside the edge of the trolley. With a constant loading and unloading height, the base sinks continuously when loaded and rises slowly when unloaded. Eight covered ball bearings are used on the spring loaded truck, which guarantees parallel and non-twisting guidance of the lowering base, even when it is only loaded on one side. Its ability to adapt to changes in weight makes it ideal for picking different goods with different weights. Panels and aluminium profiles are connected by clinching, making them very stable. Smooth side panels reduce the friction of the load, while the solid rubber tyres enable non-marking motion. The all round, hardwearing PVC bumper on the upper edge of the trolley provides additional protection for the load and protects the truck from impacts. Both handles for self-assembly, with pre-drilled holes in the truck, including fastening material. The anodised finish lends the aluminium a higher level of corrosion resistance and makes the truck more resistant to abrasion and wear.

GBP 1999.99
1

KAISER + KRAFT GMBH Spring Loaded Truck D Anodised Finish Capacity 380 Litre with Quick Grip

KAISER + KRAFT GMBH Spring Loaded Truck D Anodised Finish Capacity 380 Litre with Quick Grip

Spring loaded truck D, anodised finish, capacity 380 l, with Quick Grip. Supplied = assembled. Max. load = 130 kg. Length = 1365 mm. Width = 690 mm. Height = 1000 mm. Internal length = 1000 mm. Internal width = 650 mm. Internal height = 530 mm. Capacity = 380 l. Side panel material = aluminium. Finish = anodised. Wheel type = solid rubber non-marking. Wheel diameter = 125 mm. Wheel bearing = roller bearing. Product type = container trucks. Anodised finish for better corrosion resistance. Two grip options available: ergonomic Quick Grip or space saving Smart Grip. Adjustment of the loading and unloading height for ergonomic work. Parallel base guidance, even when loaded on one side only. PVC bumpers on the upper edge of the trolley to protect it from impacts. Non-marking motion due to solid rubber tyres. Available with a smooth or anodised finish, the spring loaded truck comes with two grip options: Quick Grip and Smart Grip. The Quick Grip handle protrudes approx. 250 mm horizontally beyond the edge of the trolley and makes it safe and ergonomic to push, while the Smart Grip is designed to save space and protect the panel inside the edge of the trolley. With a constant loading and unloading height, the base sinks continuously when loaded and rises slowly when unloaded. Eight covered ball bearings are used on the spring loaded truck, which guarantees parallel and non-twisting guidance of the lowering base, even when it is only loaded on one side. Its ability to adapt to changes in weight makes it ideal for picking different goods with different weights. Panels and aluminium profiles are connected by clinching, making them very stable. Smooth side panels reduce the friction of the load, while the solid rubber tyres enable non-marking motion. The all round, hardwearing PVC bumper on the upper edge of the trolley provides additional protection for the load and protects the truck from impacts. Both handles for self-assembly, with pre-drilled holes in the truck, including fastening material. The anodised finish lends the aluminium a higher level of corrosion resistance and makes the truck more resistant to abrasion and wear.

GBP 2099.99
1

KAISER + KRAFT GMBH Spring Loaded Truck D Smooth Finish Capacity 615 L with Smart Grip

KAISER + KRAFT GMBH Spring Loaded Truck D Smooth Finish Capacity 615 L with Smart Grip

Spring loaded truck D, smooth finish, capacity 615 l, with Smart Grip. Supplied = assembled. Max. load = 130 kg. Length = 1515 mm. Width = 740 mm. Height = 1045 mm. Internal length = 1400 mm. Internal width = 700 mm. Internal height = 620 mm. Capacity = 615 l. Side panel material = aluminium. Finish = smooth. Wheel type = solid rubber non-marking. Wheel fittings = 2 swivel castors with wheel stop, 2 fixed castors. Wheel diameter = 125 mm. Wheel bearing = roller bearing. Product type = container trucks. Smooth finish for easy truck cleaning. Two grip options available: ergonomic Quick Grip or space saving Smart Grip. Adjustment of the loading and unloading height for ergonomic work. Parallel base guidance, even when loaded on one side only. PVC bumpers on the upper edge of the trolley to protect it from impacts. Non-marking motion due to solid rubber tyres. Available with a smooth or anodised finish, the spring loaded truck comes with two grip options: Quick Grip and Smart Grip. The Quick Grip handle protrudes approx. 250 mm horizontally beyond the edge of the trolley and makes it safe and ergonomic to push, while the Smart Grip is designed to save space and protect the panel inside the edge of the trolley. With a constant loading and unloading height, the base sinks continuously when loaded and rises slowly when unloaded. Eight covered ball bearings are used on the spring loaded truck, which guarantees parallel and non-twisting guidance of the lowering base, even when it is only loaded on one side. Its ability to adapt to changes in weight makes it ideal for picking different goods with different weights. Panels and aluminium profiles are connected by clinching, making them very stable. Smooth side panels reduce the friction of the load, while the solid rubber tyres enable non-marking motion. The all round, hardwearing PVC bumper on the upper edge of the trolley provides additional protection for the load and protects the truck from impacts. Both handles for self-assembly, with pre-drilled holes in the truck, including fastening material. The smooth finish makes it easier to clean the truck.

GBP 2199.99
1

KAISER + KRAFT GMBH Spring Loaded Truck D Smooth Finish Capacity 615 L with Quick Grip

KAISER + KRAFT GMBH Spring Loaded Truck D Smooth Finish Capacity 615 L with Quick Grip

Spring loaded truck D, smooth finish, capacity 615 l, with Quick Grip. Supplied = assembled. Max. load = 130 kg. Length = 1765 mm. Width = 740 mm. Height = 1040 mm. Internal length = 1400 mm. Internal width = 700 mm. Internal height = 620 mm. Capacity = 615 l. Side panel material = aluminium. Finish = smooth. Wheel type = solid rubber non-marking. Wheel fittings = 2 swivel castors with wheel stop, 2 fixed castors. Wheel diameter = 125 mm. Wheel bearing = roller bearing. Product type = container trucks. Smooth finish for easy truck cleaning. Two grip options available: ergonomic Quick Grip or space saving Smart Grip. Adjustment of the loading and unloading height for ergonomic work. Parallel base guidance, even when loaded on one side only. PVC bumpers on the upper edge of the trolley to protect it from impacts. Non-marking motion due to solid rubber tyres. Available with a smooth or anodised finish, the spring loaded truck comes with two grip options: Quick Grip and Smart Grip. The Quick Grip handle protrudes approx. 250 mm horizontally beyond the edge of the trolley and makes it safe and ergonomic to push, while the Smart Grip is designed to save space and protect the panel inside the edge of the trolley. With a constant loading and unloading height, the base sinks continuously when loaded and rises slowly when unloaded. Eight covered ball bearings are used on the spring loaded truck, which guarantees parallel and non-twisting guidance of the lowering base, even when it is only loaded on one side. Its ability to adapt to changes in weight makes it ideal for picking different goods with different weights. Panels and aluminium profiles are connected by clinching, making them very stable. Smooth side panels reduce the friction of the load, while the solid rubber tyres enable non-marking motion. The all round, hardwearing PVC bumper on the upper edge of the trolley provides additional protection for the load and protects the truck from impacts. Both handles for self-assembly, with pre-drilled holes in the truck, including fastening material. The smooth finish makes it easier to clean the truck.

GBP 2219.99
1

KAISER + KRAFT GMBH Sneesl-grip Winter Gloves Blue Pack of 12 Pairs Size 10 (xl)

KAISER + KRAFT GMBH Sneesl-grip Winter Gloves Blue Pack of 12 Pairs Size 10 (xl)

SNEESL-GRIP winter gloves, blue, pack of 12 pairs, size 10 (XL) Supplied = assembled. Surface material = polyester, latex. Size = 10. Colour = blue. Conforms to = EN 388 CAT II + EN 511. Area of application = working in winter, building construction, assembly, allrounder. Product type = cold protection gloves. Suitable for cold days due to soft, warm inner lining. Very good grip and anti-slip qualities. Comfortable to wear due to optimum fit. Double latex coating. Glove made of 100% blue polyester with double latex coating, first layer waterproof, completely dipped in blue, second layer palm and fingertips with foamed latex coating in dark blue. Grey terry lining, pleasantly soft and warm, particularly suitable for cold days. Comfortable to wear due to excellent grip and anti-slip qualities. Optimum fit.

GBP 249.99
1

KAISER + KRAFT GMBH Sneesl-grip Winter Gloves Blue Pack of 12 Pairs Size 8 (m)

KAISER + KRAFT GMBH Sneesl-grip Winter Gloves Blue Pack of 12 Pairs Size 8 (m)

SNEESL-GRIP winter gloves, blue, pack of 12 pairs, size 8 (M) Supplied = assembled. Surface material = polyester, latex. Size = 8. Colour = blue. Conforms to = EN 388 CAT II + EN 511. Area of application = working in winter, building construction, assembly, allrounder. Product type = cold protection gloves. Suitable for cold days due to soft, warm inner lining. Very good grip and anti-slip qualities. Comfortable to wear due to optimum fit. Double latex coating. Glove made of 100% blue polyester with double latex coating, first layer waterproof, completely dipped in blue, second layer palm and fingertips with foamed latex coating in dark blue. Grey terry lining, pleasantly soft and warm, particularly suitable for cold days. Comfortable to wear due to excellent grip and anti-slip qualities. Optimum fit.

GBP 249.99
1

KAISER + KRAFT GMBH Sneesl-grip Winter Gloves Blue Pack of 12 Pairs Size 9 (l)

KAISER + KRAFT GMBH Sneesl-grip Winter Gloves Blue Pack of 12 Pairs Size 9 (l)

SNEESL-GRIP winter gloves, blue, pack of 12 pairs, size 9 (L) Surface material = polyester, latex. Size = 9. Colour = blue. Conforms to = EN 388 CAT II + EN 511. Area of application = working in winter, building construction, assembly, allrounder. Product type = cold protection gloves. Suitable for cold days due to soft, warm inner lining. Very good grip and anti-slip qualities. Comfortable to wear due to optimum fit. Double latex coating. Glove made of 100% blue polyester with double latex coating, first layer waterproof, completely dipped in blue, second layer palm and fingertips with foamed latex coating in dark blue. Grey terry lining, pleasantly soft and warm, particularly suitable for cold days. Comfortable to wear due to excellent grip and anti-slip qualities. Optimum fit.

GBP 249.99
1

KAISER + KRAFT GMBH Sneesl-grip Winter Gloves Blue Pack of 12 Pairs Size 11 (xxl)

KAISER + KRAFT GMBH Sneesl-grip Winter Gloves Blue Pack of 12 Pairs Size 11 (xxl)

SNEESL-GRIP winter gloves, blue, pack of 12 pairs, size 11 (XXL) Surface material = polyester, latex. Size = 11. Colour = blue. Conforms to = EN 388 CAT II + EN 511. Area of application = working in winter, building construction, assembly, allrounder. Product type = cold protection gloves. Suitable for cold days due to soft, warm inner lining. Very good grip and anti-slip qualities. Comfortable to wear due to optimum fit. Double latex coating. Glove made of 100% blue polyester with double latex coating, first layer waterproof, completely dipped in blue, second layer palm and fingertips with foamed latex coating in dark blue. Grey terry lining, pleasantly soft and warm, particularly suitable for cold days. Comfortable to wear due to excellent grip and anti-slip qualities. Optimum fit.

GBP 249.99
1

KAISER + KRAFT GMBH Soft Folded Hand Towels with ZigZag Fold Pack of 3750 White LxW 230 x 226mm

KAISER + KRAFT GMBH Soft Folded Hand Towels with ZigZag Fold Pack of 3750 White LxW 230 x 226mm

Soft folded hand towels with zigzag fold, pack of 3750, white, LxW 230 x 226 mm. Paper grade = advanced. Colour = white. Length = 230 mm. Width = 226 mm. Model = zigzag folded. Product type = folded paper towels. Advanced quality for efficient hand drying. Cost efficient. FSC seal and EU Ecolabel. The zigzag hand towels in an attractive laurel design make a good impression and exhibit a very good price performance ratio. In combination with the Tork dispenser for zigzag hand towels (system H3) , the hand towels are perfect for environments subject to heavy use. The single sheet dispenser ensures excellent hygiene, reducing consumption and therefore waste.

GBP 119.99
1

KAISER + KRAFT GMBH Additive Grip Adhesive and Separating Agent Cleaner Box 15 x 240 ml Bottles Ready to Use and Non-hazardous

KAISER + KRAFT GMBH Additive Grip Adhesive and Separating Agent Cleaner Box 15 x 240 ml Bottles Ready to Use and Non-hazardous

Additive Grip adhesive and separating agent cleaner, box, 15 x 240 ml bottles, ready to use and non-hazardous. Area of application = surface cleaning. Model = solution. Contents = 3.6 l. Weight = 3.66 kg. pH value = 5. Weight per item = 0.24 kg. Product type = surface cleaning agents. No VOCs: free of volatile organic compounds. Ready to use: ready for use and for immediate application. Non-hazardous in accordance with CLP regulation. Put an end to adhesion problems in FFF 3D printing! This adhesive and separating agent improves the adhesive properties, prevents warping effects and facilitates component removal. Additive Grip is non-hazardous and contains no VOCs, safe for users and the environment, and suitable for glass plates, metal plates and PEI spring steel plates. It extends the service life of the printing plate and minimises disposal due to better printing outcomes. The high quality foam layer enables precise distribution of the adhesive and separating agent on the printed surfaces. Heat resistance and improved wear reduction contribute to the longevity of the printing plates. All the advantages of Additive Grip: - Optimised adhesion: prevents warping effects for perfect printing outcomes. - Easy removal: effortless and residue free component removal after printing. - Does not damage printing plates: reduces wear and extends the service life of the printing plate. - Environmentally friendly: non-hazardous and contains no VOCs in accordance with the CLP regulation. - Efficient printing processes: minimises disposal costs due to better printing outcomes. Usage: The manual adhesion and separating agent is used in FFF 3D printing for the components on printing plates. Additive Grip is suitable for all standard printing plate types made of glass and metal, as well as PEI coated plates.

GBP 429.99
1

KAISER + KRAFT GMBH DuraLine Grip+ Non-slip Tape Width 25mm Black

KAISER + KRAFT GMBH DuraLine Grip+ Non-slip Tape Width 25mm Black

DURALINE GRIP+ non-slip tape, width 25 mm, black. Width = 25 mm. Length = 15 m. Material = plastic, aluminium. Temperature resistance = -40 C to +70 C. Type of mounting = self-adhesive. Thickness = 0.7 mm. Product type = floor marking tapes. For improved safety of paths and walking surfaces in industrial areas. Long term anti-slip properties even in the event of heavy soiling and frequent use. Suitable for use on indoor and protected outdoor surfaces. Extra coarse, self-adhesive non-slip tape for increasing safety on frequently used paths, steps or ramps. This non-slip tape is suitable for protecting paths and walking surfaces in industrial areas. - Suitable for use on exposed surfaces in indoor and protected outdoor areas - The anti-slip coating helps to make paths and steps safer - The extra coarse granulate provides long term anti-slip properties even in the event of heavy soiling and frequent use - Areas of application include steps, ramps, industrial floors and treads on machines and vehicles - In accordance with ASR A1.5/1, 2 ''Floors'' as per DIN 51130 Anti-slip properties (R group) R13 - Length 15 m, width 25 mm

GBP 63.99
1

KAISER + KRAFT GMBH DuraLine Grip+ Formfit Non-slip Tape Width 50mm Black

KAISER + KRAFT GMBH DuraLine Grip+ Formfit Non-slip Tape Width 50mm Black

DURALINE GRIP+ FORMFIT non-slip tape, width 50 mm, black. Width = 50 mm. Length = 15 m. Material = plastic, aluminium. Temperature resistance = -40 C to +70 C. Type of mounting = self-adhesive. Thickness = 1.12 mm. Product type = floor marking tapes. Adapts to uneven surfaces and is particularly suitable for surfaces made of checker plate or diamond plate. In accordance with ASR A1.5/1.2 ''Floors'' as per DIN 51130 Anti-slip properties (R group) R13. Self-adhesive, ductile non-slip tape to make paths and walking surfaces safer. Self-adhesive, ductile non-slip tape with extra coarse granulate for making uneven walking surfaces safer, e.g. made of checker plate or diamond plate. This non-slip tape is suitable for protecting uneven paths and walking surfaces in industrial areas. - Suitable for use indoors and protected outdoor areas - The ductile aluminium tape adapts to uneven surfaces and is particularly suitable for surfaces made of checker plate or diamond plate - Areas of application include steps, ramps, industrial floors and treads on machines and vehicles - In accordance with ASR A1.5/1, 2 ''Floors'' as per DIN 51130 Anti-slip properties (R group) R13 - Length: 15 m, width 50 mm

GBP 159.99
1

KAISER + KRAFT GMBH DuraLine Grip+ Non-slip Tape Width 25mm Yellow/black

KAISER + KRAFT GMBH DuraLine Grip+ Non-slip Tape Width 25mm Yellow/black

DURALINE GRIP+ non-slip tape, width 25 mm, yellow/black. Width = 25 mm. Length = 15 m. Material = plastic, aluminium. Temperature resistance = -40 C to +70 C. Type of mounting = self-adhesive. Thickness = 0.7 mm. Product type = floor marking tapes. For improved safety of paths and walking surfaces in industrial areas. Long term anti-slip properties even in the event of heavy soiling and frequent use. Suitable for use on indoor and protected outdoor surfaces. Extra coarse, self-adhesive non-slip tape for increasing safety on frequently used paths, steps or ramps. This non-slip tape is suitable for protecting paths and walking surfaces in industrial areas. - Suitable for use on exposed surfaces in indoor and protected outdoor areas - The anti-slip coating helps to make paths and steps safer - The extra coarse granulate provides long term anti-slip properties even in the event of heavy soiling and frequent use - Areas of application include steps, ramps, industrial floors and treads on machines and vehicles - In accordance with ASR A1.5/1, 2 ''Floors'' as per DIN 51130 Anti-slip properties (R group) R13 - Length 15 m, width 25 mm

GBP 63.99
1

KAISER + KRAFT GMBH Spring Loaded Truck Adjustable Spring Force Anodised Surface Capacity 480 L with Quick Grip

KAISER + KRAFT GMBH Spring Loaded Truck Adjustable Spring Force Anodised Surface Capacity 480 L with Quick Grip

Spring loaded truck, adjustable spring force, anodised surface, capacity 480 l, with Quick Grip. Supplied = assembled. Max. load = 130 kg. Length = 1435 mm. Width = 740 mm. Height = 1040 mm. Internal length = 1070 mm. Internal width = 740 mm. Internal height = 610 mm. Capacity = 480 l. Side panel material = anodised aluminium. Finish = anodised. Wheel type = nylon/polyurethane. Wheel fittings = 4 swivel castors, 2 with stop, 1 fixed castor, spring loaded. Wheel diameter = 125 mm. Wheel bearing = precision ball bearing. Product type = container trucks. Infinitely adjustable spring force for an ergonomic working height. Spring force from approx. 25 - 70 kg, infinitely variable adjustment range from approx. 45 kg. Individually adjustable spring force for constantly changes of goods. Flexible to adapt at any time - without conversion or interrupting the work process. Closed base for access by a pallet truck or forklift truck. PVC bumpers on the upper edge of the trolley to protect it from impacts. Non-marking motion due to solid rubber tyres. Suitable for versatile use in e-commerce, industry and retail. The order picking trolley with infinitely adjustable spring force is a reliable partner for ergonomic and efficient order picking. Made of anodised aluminium, the trolley with a spring base offers maximum stability and durability. Depending on the weight and volume of the goods, the spring force can be adjusted with a single movement during the order picking tour. Choose between the model with the practical Quick Grip handle or the model without a handle for maximum flexibility. The spring force makes a constant loading and unloading height possible, ensuring you can always rely on an ergonomic working height. The weight of the load continuously lowers the floor, and the floor rises again when the load is removed from the trolley. The spring force can be adjusted effortlessly and without interrupting the work process - simply lift and move the handle. With its adjustment range of approx. 25 - 70 kg, this order picking trolley offers users the flexibility to customise the loading height to different loads and products. Its versatility makes it ideal for use in a range of sectors, whether in e-commerce, industry, retail or service companies. The closed base also makes it perfect for use with pallet trucks or forklift trucks, with the casing firmly riveted to ensure maximum safety. The walls and aluminium profiles are form fitting, as they are connected by clinching, making them very stable. Smooth side panels reduce the friction of the load, while the solid rubber tyres enable non-marking motion. The all round, hardwearing PVC bumper on the upper edge of the trolley provides additional protection for your load and protects the trolley from impacts. Model with Smart Grip: handle for self-assembly, including fastening material.

GBP 3299.99
1

KAISER + KRAFT GMBH Uniform forLIFE LED Hand Lamp with Charging Station 500 Lumens Protection Type IP65

KAISER + KRAFT GMBH Uniform forLIFE LED Hand Lamp with Charging Station 500 Lumens Protection Type IP65

UNIFORM forLIFE LED hand lamp, with charging station, 500 lumens, protection type IP65. Product type = workplace lamps. Bulb = LED. Luminous flux = 500 lumen. Luminous colour = daylight white. Colour temperature = 6000 K. Mains voltage = 100 - 240 V/50 - 60 Hz. Protection type = IP65. Operating life = 4.5 hrs. Max. brightness = 950 lux. Power supply = operated by rechargeable battery. Battery version = lithium-ion battery (Li-ion) Rechargeable battery voltage = 3.7 V. Battery capacity = 3 Ah. Charging time = 5 hrs. Weight = 0.26 kg. Rechargeable LED work light with practical charging station. Adjustable light output up to 500 lumens. Dust and waterproof, certified for use on construction sites. UNIFORM was designed for a consistent output in harsh working environments, and is hardwearing and resistant to water and dust (IP65) It is a versatile work light equipped with a rotating hook and a powerful integrated magnet that makes it flexible to place in any position required during inspection work. The hand lamp is also equipped with a clip for a work belt. The flexible lamp head can be rotated by up to 180, making it flexible to adjust the direction of the light as required. In addition, the hand lamp has an ergonomic handle and a compact design, making it easy to carry. Powered by a high efficiency, multi-LED design with 32 LEDs, UNIFORM provides a powerful and adjustable light output of up to 500 lumens. The spotlight at the top provides a focussed light beam of 175 lumens - ideal for a range of inspection tasks that require a concentrated light source. In addition, the user friendly battery indicator shows how much power is left. The OPTILight setting provides the required light intensity (Lux) for typical work situations and ensures optimum illumination and runtime by simply pushing a button. This work light provides a constant lumen output, measured in accordance with European standard EN 13032-1.

GBP 214.99
1

KAISER + KRAFT GMBH Uniform forLIFE LED Hand Lamp Ultra Thin with Spot Light At The Top 150 Lumens

KAISER + KRAFT GMBH Uniform forLIFE LED Hand Lamp Ultra Thin with Spot Light At The Top 150 Lumens

UNIFORM forLIFE LED hand lamp, ultra thin, with spotlight at the top, 150 lumens. Product type = workplace lamps. Bulb = LED. Luminous flux = 150 lumen. Luminous colour = daylight white. Colour temperature = 6000 K. Mains voltage = 100 - 240 V/50 - 60 Hz. Protection type = IP65. Operating life = 4 hrs. Max. brightness = 200 lux. Power supply = operated by rechargeable battery. Battery version = lithium-ion battery (Li-ion) Rechargeable battery voltage = 3.7 V. Battery capacity = 1.6 Ah. Charging time = 3 hrs. Height = 13 mm. Weight = 0.08 kg. Handy 2 in 1 COB LED pencil light. Powerful integrated magnet for easy positioning at the workstation. Additional light with concentrated light for a range of inspection tasks. UNIFORM was designed for a consistent output in harsh working environments, and is hardwearing and resistant to water and dust (IP65) UNIFORM comes with an integrated magnet for easy positioning and a pocket clip that makes it convenient to carry. In addition, the light head can be rotated by up to 180 degrees due to the small, flexible clips, making it flexible to place in any position. Powered by a high efficiency multi-LED design with 20 LEDs, UNIFORM provides an adjustable light output of up to 150 lumens. The spotlight provides a focussed light beam of 75 lumens - ideal when you need a concentrated light source for a range of inspection tasks. In addition, the user friendly battery indicator shows how much power is left. The OPTILight setting provides the required light intensity (Lux) for typical work situations and ensures optimum illumination and runtime by simply pushing a button. This work light provides a constant lumen output, measured in accordance with European standard EN 13032-1.

GBP 153.99
1

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 11

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 11

NITRIL DOT fine knit gloves, pack of 12 pairs, grey/black, size 11. Surface material = 90% nylon/10% elastane. Size = 11. Colour = grey, black. Conforms to = OEKO-TEX Standard 100, E 388:2016, EN 407:2020, EN ISO 21420:2020. Area of application = automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Length = 250 mm. Product type = mechanical/assembly gloves. Very good grip for oily and wet work, even on smooth objects. Water repellent effect. Actively breathing. For oily and wet work requiring a very good grip even on smooth objects, e.g. automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Mae of 90% nylon and 10% elastane, no seams. Black, foamed nitrile coating with additional nitrile nubs, water repellent, does not look dirty due to dark colours. The back of the glove, which is actively breathing, keeps hands cool and dry, resulting in excellent grip when wet and dry. Particularly comfortable to wear due to perfect fit, very little linting, excellent grip due to integrated latticed coating, especially for oily and wet work.

GBP 133.99
1

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 7

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 7

NITRIL DOT fine knit gloves, pack of 12 pairs, grey/black, size 7. Surface material = 90% nylon/10% elastane. Size = 7. Colour = grey, black. Conforms to = OEKO-TEX Standard 100, E 388:2016, EN 407:2020, EN ISO 21420:2020. Area of application = automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Length = 250 mm. Product type = mechanical/assembly gloves. Very good grip for oily and wet work, even on smooth objects. Water repellent effect. Actively breathing. For oily and wet work requiring a very good grip even on smooth objects, e.g. automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Mae of 90% nylon and 10% elastane, no seams. Black, foamed nitrile coating with additional nitrile nubs, water repellent, does not look dirty due to dark colours. The back of the glove, which is actively breathing, keeps hands cool and dry, resulting in excellent grip when wet and dry. Particularly comfortable to wear due to perfect fit, very little linting, excellent grip due to integrated latticed coating, especially for oily and wet work.

GBP 133.99
1

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 8

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 8

NITRIL DOT fine knit gloves, pack of 12 pairs, grey/black, size 8. Surface material = 90% nylon/10% elastane. Size = 8. Colour = grey, black. Conforms to = OEKO-TEX Standard 100, E 388:2016, EN 407:2020, EN ISO 21420:2020. Area of application = automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Length = 250 mm. Product type = mechanical/assembly gloves. Very good grip for oily and wet work, even on smooth objects. Water repellent effect. Actively breathing. For oily and wet work requiring a very good grip even on smooth objects, e.g. automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Mae of 90% nylon and 10% elastane, no seams. Black, foamed nitrile coating with additional nitrile nubs, water repellent, does not look dirty due to dark colours. The back of the glove, which is actively breathing, keeps hands cool and dry, resulting in excellent grip when wet and dry. Particularly comfortable to wear due to perfect fit, very little linting, excellent grip due to integrated latticed coating, especially for oily and wet work.

GBP 133.99
1

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 10

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 10

NITRIL DOT fine knit gloves, pack of 12 pairs, grey/black, size 10. Surface material = 90% nylon/10% elastane. Size = 10. Colour = grey, black. Conforms to = OEKO-TEX Standard 100, E 388:2016, EN 407:2020, EN ISO 21420:2020. Area of application = automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Length = 250 mm. Product type = mechanical/assembly gloves. Very good grip for oily and wet work, even on smooth objects. Water repellent effect. Actively breathing. For oily and wet work requiring a very good grip even on smooth objects, e.g. automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Mae of 90% nylon and 10% elastane, no seams. Black, foamed nitrile coating with additional nitrile nubs, water repellent, does not look dirty due to dark colours. The back of the glove, which is actively breathing, keeps hands cool and dry, resulting in excellent grip when wet and dry. Particularly comfortable to wear due to perfect fit, very little linting, excellent grip due to integrated latticed coating, especially for oily and wet work.

GBP 133.99
1

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 9

KAISER + KRAFT GMBH Nitril Dot Fine Knit Gloves Pack of 12 Pairs Grey/black Size 9

NITRIL DOT fine knit gloves, pack of 12 pairs, grey/black, size 9. Surface material = 90% nylon/10% elastane. Size = 9. Colour = grey, black. Conforms to = OEKO-TEX Standard 100, E 388:2016, EN 407:2020, EN ISO 21420:2020. Area of application = automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Length = 250 mm. Product type = mechanical/assembly gloves. Very good grip for oily and wet work, even on smooth objects. Water repellent effect. Actively breathing. For oily and wet work requiring a very good grip even on smooth objects, e.g. automotive industry, built-in machinery components, small metal and plastic parts handling, warehousing and logistics, skilled trades, horticulture. Mae of 90% nylon and 10% elastane, no seams. Black, foamed nitrile coating with additional nitrile nubs, water repellent, does not look dirty due to dark colours. The back of the glove, which is actively breathing, keeps hands cool and dry, resulting in excellent grip when wet and dry. Particularly comfortable to wear due to perfect fit, very little linting, excellent grip due to integrated latticed coating, especially for oily and wet work.

GBP 133.99
1

KAISER + KRAFT GMBH Heavy Duty Trolley with Pneumatic Rubber Wheels Platform 1000 x 3000mm

KAISER + KRAFT GMBH Heavy Duty Trolley with Pneumatic Rubber Wheels Platform 1000 x 3000mm

Heavy duty trolley, with pneumatic rubber wheels, platform 1000 x 3000 mm. Supplied = assembled. Colour = blue. Loading height = 490 mm. Platform length = 1000 mm. Platform width = 3000 mm. Platform material = steel. Max. load = 800 kg. Wheel type = pneumatic tyres. Wheel diameter = 400 mm. Product type = hand trucks. Pneumatic rubber wheels, 400 mm. Parking brake and pull handle. Pulled by hand or by tow truck. Sturdy, heavy duty trolley. The trolley is braked by means of the drawbar. A range of accessories are available for this trolley. 4 fixed castors.

GBP 1799.99
1