261 results (0,13602 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

MINI R56 UNSTRIPPED FITMENT - CLEARANCE - RED

MINI R56 UNSTRIPPED FITMENT - CLEARANCE - RED

WE HAVE 3 R56 UNSTRIPPED FITMENT CAGES IN STOCK!   THESE WERE ORDERED BY ONE CLIENT WHO DIDNT REALISE SOME TRIMMING WOULD BE REQUIRED TO FIT THE CAGE. THE REAR OF THE CAGE PASSES THROUGH THE REAR PANELS AND REQUIRES THE ARM REST TO BE CUT OUT AS WELL AS SOME OFF THE INNER SILL TRIM TO CLEAR THE MOUNT.   THESE 3 CAGES ARE COATED RED AND APPEAR UNDAMAGED HOWEVER WE HAVE NOT UNPACKED THEM YET WILL FIT MINI R50/R53 WITH TALLER CENTRE MOUNTS RETAIL AT £639 EACH DELIVERED INCLUDING VAT £553 DELIVERED TO CLEAR!

GBP 418.00
1

Mini R56 PAN ROOF UNSTRIPPED FITMENT IN RED - CLEARANCE

Mini R56 PAN ROOF UNSTRIPPED FITMENT IN RED - CLEARANCE

WE HAVE 1 R56 UNSTRIPPED PAN ROOF FITMENT CAGE IN STOCK!   ORDERED BY ONE CLIENT WHO DIDNT REALISE SOME TRIMMING WOULD BE REQUIRED TO FIT THE CAGE. THE REAR OF THE CAGE PASSES THROUGH THE REAR PANELS AND REQUIRES THE ARM REST TO BE CUT OUT AS WELL AS SOME OFF THE INNER SILL TRIM TO CLEAR THE MOUNT.   THIS HAS HAD 1 FOOT BEND IN TRANSIT AND THE PAINT HAS SLIGHTLY CRACKED, EASY JOB TO STRAIGHTEN BEFORE FITTING AND WONT BE SEEN WHEN CARPET IS TRIMMED TO SUIT.   WILL FIT MINI R55/50 WITH TALLER MOUNTS   RETAIL AT £639 EACH DELIVERED INCLUDING VAT £553.95 DELIVERED TO CLEAR!

GBP 405.00
1

Mini R50 / R53 Half Roll Cage (Material: Standard CDS)

Mini R50 / R53 Half Roll Cage (Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. Unstripped and stripped fitment require mounts to be welded in place, and do require some trimming to the plastics.   Available powder coated and in a wide range of colours, your R50/R53 roll cage is customisable to your Mini.

GBP 567.00
1

Mini R50 / R53 Half Roll Cage (Colour: Unpainted, Material: Standard CDS)

Mini R50 / R53 Half Roll Cage (Colour: Unpainted, Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. Unstripped and stripped fitment require mounts to be welded in place, and do require some trimming to the plastics.   Available powder coated and in a wide range of colours, your R50/R53 roll cage is customisable to your Mini.

GBP 504.00
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC2 - Single Doorbars, X Rear)

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC2 - Single Doorbars, X Rear)

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 756.00
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC1.5 (sing

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC1.5 (sing

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1002.00
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC2 - Singl

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC2 - Singl

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1134.00
1

Mini R50 / R53 Half Roll Cage (Colour: Specific RAL, Material: Standard CDS)

Mini R50 / R53 Half Roll Cage (Colour: Specific RAL, Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. Unstripped and stripped fitment require mounts to be welded in place, and do require some trimming to the plastics.   Available powder coated and in a wide range of colours, your R50/R53 roll cage is customisable to your Mini.

GBP 667.80
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC1.5 (single diagonal, harness bar and single

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC1.5 (single diagonal, harness bar and single

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 667.80
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC4 - X REA

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC4 - X REA

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1418.40
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC3 - X rea

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC3 - X rea

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1323.60
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC3 - X rear, Double doorbars and centre brace)

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC3 - X rear, Double doorbars and centre brace)

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 882.00
1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC4 - X REAR, DOUBLE DOORBARS, A PILLAR SUPPORT

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC4 - X REAR, DOUBLE DOORBARS, A PILLAR SUPPORT

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 945.00
1

Mini R50 / R53 Half Roll Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Mini R50 / R53 Half Roll Cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. Unstripped and stripped fitment require mounts to be welded in place, and do require some trimming to the plastics.   Available powder coated and in a wide range of colours, your R50/R53 roll cage is customisable to your Mini.

GBP 819.00
1

Mini R50 / R53 Half Roll Cage (Colour: Specific Metallic RAL, Material: Standard CDS)

Mini R50 / R53 Half Roll Cage (Colour: Specific Metallic RAL, Material: Standard CDS)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. Unstripped and stripped fitment require mounts to be welded in place, and do require some trimming to the plastics.   Available powder coated and in a wide range of colours, your R50/R53 roll cage is customisable to your Mini.

GBP 718.20
1

Mini R50 / R53 Half Roll Cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

Mini R50 / R53 Half Roll Cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This is a track day spec cage perfect for track day use on a budget , Perfect for casual track days at low cost. This Design utilizes ‘X’ Bracing with harness bars and gusseting. This cage follows The Motorsport UK Blue Book Specifications, although you cannot compete with a half cage this cage follows all the rules to ensure it is fit for purpose, and can offer you significantly more protection in the event of a roll than without one. Unstripped and stripped fitment require mounts to be welded in place, and do require some trimming to the plastics.   Available powder coated and in a wide range of colours, your R50/R53 roll cage is customisable to your Mini.

GBP 756.00
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1121.40
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1486.80
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1008.00
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4 - With A Pillar Supports)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4 - With A Pillar Supports)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1499.40
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1600.20
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC5 - JPC4 with X roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC5 - JPC4 with X roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1512.00
1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC5 - JPC4 with X roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC5 - JPC4 with X roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1663.20
1