290 results (0,24069 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Indexa P1136-45 Base Mounted Push Pull Clamp

Indexa P1136-45 Base Mounted Push Pull Clamp

Base Mounted Type (Flanged) Push-Pull toggle clamps use a plunger mechanism to produce a positive straight-line action. They have the advantage of having a low profile, using side or end clamping and so are most suitable for application having a height restriction. Features include: Body and linkage components on the light duty range are zinc plated to resist corrosion. Pivot points are fitted with hardened steel or stainless steel rivets to maintain accuracy and provide a long life. Red vinyl hand grip with cushion rib profile for improved user comfort. The heavy-duty range has ductile cast iron bases for strength and rigidity.

GBP 0.00
1

Indexa 3/4"x1/8"x24" Aluminium Flat Bar 6082 (1 Pce)

Indexa 3/4"x1/8"x24" Aluminium Flat Bar 6082 (1 Pce)

Grade 6082 Medium strength alloy with very good corrosion resistance. Additions of magnesium, manganese and silicon enhance the mechanical and corrosion resistance properties. Good cold forming properties, ease of joining, good machinability and high mechanical strengths. Used for packaging containers, foils, tubes, printing plates, strip for heat exchangers, boiler making, insulation foils, kitchenware, chemical and food industry equipment containers, ore skips, automotive trim and light reflectors.

GBP 1.12
1

1in x 1/4in x 24in Aluminium Flat Bar Grade 6082 - 4 Pieces

1in x 1/4in x 24in Aluminium Flat Bar Grade 6082 - 4 Pieces

Grade 6082 Medium strength alloy with very good corrosion resistance. Additions of magnesium, manganese and silicon enhance the mechanical and corrosion resistance properties. Good cold forming properties, ease of joining, good machinability and high mechanical strengths. Used for packaging containers, foils, tubes, printing plates, strip for heat exchangers, boiler making, insulation foils, kitchenware, chemical and food industry equipment containers, ore skips, automotive trim and light reflectors.

GBP 0.00
1

1/2in x 1/2in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 5 Pieces

1/2in x 1/2in x 1/8in x 24in Brass Bar Equal Angle CW614N/CZ121 - 5 Pieces

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts. The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance. Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

GBP 0.00
1

Indexa Junction "T" Piece 1/4" Bore

Indexa Junction "T" Piece 1/4" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 3.99
1

Indexa 1/2"-1/4" Reducer 1/2" Bore

Indexa 1/2"-1/4" Reducer 1/2" Bore

Junction Reducers Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 3.29
1

Indexa 3/4"-1/2" Reducer 3/4" Bore

Indexa 3/4"-1/2" Reducer 3/4" Bore

Junction Reducers Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 3.99
1

Indexa 1" Nozzle Flared 1/4" Bore

Indexa 1" Nozzle Flared 1/4" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 3.49
1

Indexa Junction "T" Piece 1/2" Bore

Indexa Junction "T" Piece 1/2" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 4.09
1

Indexa 1.3/4" Nozzle Flared 1/2" Bore

Indexa 1.3/4" Nozzle Flared 1/2" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 4.19
1

Indexa Junction "L" Piece 1/4" Bore

Indexa Junction "L" Piece 1/4" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 3.09
1

Indexa 3/16" Nozzle Pointed Straight 1/4" Bore

Indexa 3/16" Nozzle Pointed Straight 1/4" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 1.23
1

Indexa 1/2" Nozzle Pointed Straight 1/2" Bore

Indexa 1/2" Nozzle Pointed Straight 1/2" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 1.42
1

Indexa 5/8" Nozzle Pointed Straight 3/4" Bore

Indexa 5/8" Nozzle Pointed Straight 3/4" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 1.69
1

Indexa 1/4" Nozzle Pointed Straight 1/2" Bore

Indexa 1/4" Nozzle Pointed Straight 1/2" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 1.42
1

Indexa 1/4" Nozzle Pointed Straight 1/4" Bore

Indexa 1/4" Nozzle Pointed Straight 1/4" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 1.23
1

Indexa 1/16" Nozzle Pointed Straight 1/4" Bore

Indexa 1/16" Nozzle Pointed Straight 1/4" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 1.23
1

Indexa 3/8" Nozzle Pointed Straight 1/2" Bore

Indexa 3/8" Nozzle Pointed Straight 1/2" Bore

Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal - non-conductive and chemical resistant. Available with 1/4", 1/2" and 3/4" bore. Hose is green, all other fittings are orange.

GBP 1.42
1