132 results (0,18834 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

HMT VersaDrive ImpactaStep Cutter InsertFoam Set 16, 22, 26, 32mm

HMT VersaDrive ImpactaStep Cutter InsertFoam Set 16, 22, 26, 32mm

The ImpactaStep Cutter offers combined drilling and reaming on materials up to 12mm thick. Featuring 5 individual cutting diameters and a straight flute design for strength and easy resharpening, the ImpactaStep Cutter is optimised for use with Impact Wrenches as well as the latest range of VersaDrive Premium Magnet Drills. VersaDrive ImpactaStep Cutters have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or Pistol Drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.

GBP 499.99
1

HMT Versadrive Stakit Steel Erectors Snagging Kit - Metric Sizes

HMT Versadrive Stakit Steel Erectors Snagging Kit - Metric Sizes

The Steel Erector's Snagging Kit is a heavy duty site kit for hole creation, enlarging and aligning at all the most commonly required sizes. Presented in an interlocking, stackable, and protective STAKIT case, it includes CarbideMax Broach cutters and VersaDrive HoleCutters for hole creation, VersaDrive Reamers and ImpactaStep Cutters for hole enlarging and aligning and heavy duty VersaDrive adapters for 1/2" and 3/4" Impact wrenches. For tight access applications requiring additional reach, a 130mm VersaDrive extension arbor is also included. Comes complete with all pilot pins and hex keys needed for Broach cutters and HoleCutters.

GBP 999.99
1

HMT VersaDrive TurboTip Impact Drill Bit Set - 17/32", 9/16", 5/8", 11/16", 3/4", 13/16"

HMT VersaDrive TurboTip Impact Drill Bit Set - 17/32", 9/16", 5/8", 11/16", 3/4", 13/16"

VersaDrive TurboTip Impact drill bits are stepped tip bits that drill at twice the speed of standard bits without the need for pilot drilling while cutting a perfectly round hole. Turbocharge your drilling performance by using this revolutionary tool with an Impact Wrench or Impact Driver. Double-hardened and titanium coated for faster drilling & reduced wear. VersaDrive TurboTip drill bits have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or Pistol Drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.

GBP 519.99
1

HMT RTQ40 Low Profile Magnetic Drill, 230 Volt UK

HMT RTQ40 Low Profile Magnetic Drill, 230 Volt UK

The new HMT RTQ40 is a low profile Magnet drill for tight access applications, being designed to fit into any space greater than 180mm. Suitable for use with any standard broaching cutters while optimised to work with the high-performance CarbideMax 40 cutters. Ratchet drive can be mounted on either side of the machine. Powerful motor and magnet gives excellent stability. Quick-change 19.05mm 3/4" arbor for all standard broaching cuttersFeatures & Benefits- Each machine comes in a plastic case with hex keys, restraint strap, ratchet, and removable coolant system- Ideal for tight access applications- Gravity oil fed coolant system

GBP 1099.99
1

HMT RTQ40 Low Profile Magnetic Drill, 110 Volt UK

HMT RTQ40 Low Profile Magnetic Drill, 110 Volt UK

The new HMT RTQ40 is a low profile Magnet drill for tight access applications, being designed to fit into any space greater than 180mm. Suitable for use with any standard broaching cutters while optimised to work with the high-performance CarbideMax 40 cutters. Ratchet drive can be mounted on either side of the machine. Powerful motor and magnet gives excellent stability. Quick-change 19.05mm 3/4" arbor for all standard broaching cuttersFeatures & Benefits- Each machine comes in a plastic case with hex keys, restraint strap, ratchet, and removable coolant system- Ideal for tight access applications- Gravity oil fed coolant system

GBP 1099.99
1

HMT VersaDrive Impact Reamer Set - 9/16, 11/16, 13/16, 15/16, 1-1/16

HMT VersaDrive Impact Reamer Set - 9/16, 11/16, 13/16, 15/16, 1-1/16

VersaDrive reamers are the perfect hole alignment and enlarging tool for metalworkers & steel erectors for keeping the job moving when a hole is misaligned or the incorrect size for the fixing. Featuring a specially designed 6 flute cutting geometry and Titanium coating, VersaDrive Reamers are fully Impact rated and perform fastest when used with an Impact Wrench providing ultimate cutting performance with virtually no powertool kickback. VersaDrive Reamers have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for Pistol Drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.

GBP 539.99
1

HMT VersaDrive Impact Reamer InsertFoam Set - 18, 20, 21, 22, 24, 26mm

HMT VersaDrive Impact Reamer InsertFoam Set - 18, 20, 21, 22, 24, 26mm

VersaDrive reamers are the perfect hole alignment and enlarging tool for metalworkers & steel erectors for keeping the job moving when a hole is misaligned or the incorrect size for the fixing.Featuring a specially designed 6 flute cutting geometry and Titanium coating, VersaDrive Reamers are fully Impact rated and perform fastest when used with an Impact Wrench providing ultimate cutting performance with virtually no powertool kickback.VersaDrive Reamers have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for Pistol Drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.

GBP 629.99
1

HMT VersaDrive ImpactaTap InsertFoam Set M6, M8, M10, M12, M16, M20, M24 - 7 Piece

HMT VersaDrive ImpactaTap InsertFoam Set M6, M8, M10, M12, M16, M20, M24 - 7 Piece

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by Impact Wrenches and Impact Drivers, providing at least 15x faster performance than tapping by hand. With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or Pistol Drills (up to 3/8") or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.

GBP 439.99
1

HMT VersaDrive Oversized Galv ImpactaTap M16.4 x 2.0mm 10 Pack

HMT VersaDrive Oversized Galv ImpactaTap M16.4 x 2.0mm 10 Pack

VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings. VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits

GBP 859.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap M12 x 1.75mm 10 Pack

HMT VersaDrive Spiral Flute Combi Drill-Tap M12 x 1.75mm 10 Pack

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 499.99
1

HMT VersaDrive Oversized Galv ImpactaTap M30.4 x 3.5mm 10 Pack

HMT VersaDrive Oversized Galv ImpactaTap M30.4 x 3.5mm 10 Pack

VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings. VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits

GBP 1599.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap M10 x 1.5mm 10 Pack

HMT VersaDrive Spiral Flute Combi Drill-Tap M10 x 1.5mm 10 Pack

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 499.99
1

HMT VersaDrive Oversized Galv ImpactaTap M8.4 x 1.25mm 10 Pack

HMT VersaDrive Oversized Galv ImpactaTap M8.4 x 1.25mm 10 Pack

VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings. VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits

GBP 439.99
1

HMT VersaDrive Step Drill 3/16-7/8" (1/16" Increments) 10 Pack

HMT VersaDrive Step Drill 3/16-7/8" (1/16" Increments) 10 Pack

The first step drill optimised for use with impact wrenches & impact drivers allowing the user to create holes in seconds. Featuring a spiral flute design with self-starting drill tip, for fast, smooth drilling with a rotary drill or impact wrench and market leading 5mm thick drilling capacity. VersaDrive Step Drills have a patented non-slip, Hex shank suitable for use in any standard 1/2" drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Features & Benefits- Fast, smooth drilling with minimal kickback- Specially hardened for impact wrench use- Precision ground flutes with easy chip clearance -135 split point angle for easy starting & accuracy- GoldMax low-friction titanium coating to stop burn out- High strength, non-slip shank design

GBP 759.99
1

HMT VersaDrive Oversized Galv ImpactaTap M12.4 x 1.75mm 10 Pack

HMT VersaDrive Oversized Galv ImpactaTap M12.4 x 1.75mm 10 Pack

VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings. VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits

GBP 699.99
1

HMT VersaDrive Spiral Flute Combi Drill-Tap 3/8-16 UNC 10 Pack

HMT VersaDrive Spiral Flute Combi Drill-Tap 3/8-16 UNC 10 Pack

VersaDrive Combi Drill Taps are a time saving solution for pilot drilling & tapping in one easy operation. The Titanium coating provides wear resistance and faster cutting performance.VersaDrive Sheet Metal Impacta-DrillTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.Recommended for use with Impact Drivers for high drilling and tapping productivity.Features & Benefits- Ground flute twist drill creates the perfect tapping hole- Safer tapping with minimal kickback- Specially hardened for impact wrench use- High grade tool steel for high accuracy & long life- Goldmax low friction titanium coating to stop burn out- High strength, non slip shank design- Drill & Tap in one easy operation

GBP 519.99
1

HMT VersaDrive Oversized Galv ImpactaTap M20.4 x 2.5mm 10 Pack

HMT VersaDrive Oversized Galv ImpactaTap M20.4 x 2.5mm 10 Pack

VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings. VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits

GBP 949.99
1

HMT VersaDrive Oversized Galv ImpactaTap M10.4 x 1.5mm 10 Pack

HMT VersaDrive Oversized Galv ImpactaTap M10.4 x 1.5mm 10 Pack

VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings. VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.Features & Benefits

GBP 619.99
1