54 results (0,13704 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Gordon Measurement M11 Tungsten Carbide Micrometer Check Set - Grade 1

Gordon Measurement M11 Tungsten Carbide Micrometer Check Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in Grade 0 for Calibration, and Grade 1 for Inspection - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Micrometer Check Set -M11, Grade 1 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 11 Pieces of Small Blocks -Composition (mm) : -3.10, 6.5, 9.70, 12.50, 15.80, 19.00, 21.90, 25.00, 50.00, 75.00, 100.00

GBP 649.99
1

Gordon Measurement E11 Tungsten Carbide Micrometer Check Set - Grade 1

Gordon Measurement E11 Tungsten Carbide Micrometer Check Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in Grade 0 for Calibration, and Grade 1 for Inspection - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Micrometer Check Set -E11, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 11 Pieces of Small Blocks -Composition (inch) : -0.130, 0.250, 0.385, 0.500, 0.615, 0.750, 0.870, 1.000, 2.000, 3.000, 4.000

GBP 729.99
1

Gordon Measurement M11 Tungsten Carbide Micrometer Check Set - Grade 0

Gordon Measurement M11 Tungsten Carbide Micrometer Check Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in Grade 0 for Calibration, and Grade 1 for Inspection - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Micrometer Check Set -M11, Grade 0 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 11 Pieces of Small Blocks -Composition (mm) : -3.10, 6.5, 9.70, 12.50, 15.80, 19.00, 21.90, 25.00, 50.00, 75.00, 100.00

GBP 699.99
1

Gordon Measurement E11 Tungsten Carbide Micrometer Check Set - Grade 0

Gordon Measurement E11 Tungsten Carbide Micrometer Check Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in Grade 0 for Calibration, and Grade 1 for Inspection - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Micrometer Check Set -E11, Grade 0 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 11 Pieces of Small Blocks -Composition (inch) : -0.130, 0.250, 0.385, 0.500, 0.615, 0.750, 0.870, 1.000, 2.000, 3.000, 4.000

GBP 819.99
1

Gordon Measurement M103 Tungsten Carbide Gauge Block Set - Grade 2

Gordon Measurement M103 Tungsten Carbide Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M103, Grade 2 (Workshop Grade) , Comply with Standard: DIN 861 -Contains 103 Pieces of Small Blocks -Composition (mm) : -1.0005 (1 pc) -1.01 - 1.49 (0.01 increments, 49 pcs) -0.5 - 24.5 (0.5 increments, 49 pcs) -25 - 100 (25.0 increments, 4 pcs)

GBP 1799.99
1

Gordon Measurement 50-100mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 50-100mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 50-100mm; Heads count: 4 (50-63, 62-75, 75-88, 87-100mm) -Setting Rings: 62, 87

GBP 999.99
1

Gordon Measurement M103 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement M103 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M103, Grade 1 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 103 Pieces of Small Blocks -Composition (mm) : -1.0005 (1 pc) -1.01 - 1.49 (0.01 increments, 49 pcs) -0.5 - 24.5 (0.5 increments, 49 pcs) -25 - 100 (25.0 increments, 4 pcs)

GBP 1999.99
1

Gordon Measurement M103 Tungsten Carbide Gauge Block Set - Grade 0

Gordon Measurement M103 Tungsten Carbide Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M103, Grade 0 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 103 Pieces of Small Blocks -Composition (mm) : -1.0005 (1 pc) -1.01 - 1.49 (0.01 increments, 49 pcs) -0.5 - 24.5 (0.5 increments, 49 pcs) -25 - 100 (25.0 increments, 4 pcs)

GBP 2799.99
1

Gordon Measurement 6-12mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 6-12mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 6-12mm; Heads count: 3 (6-8, 8-10, 10-12mm) -Setting Rings: 6, 8, 10

GBP 499.99
1

Gordon Measurement 20-50mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 20-50mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 20-50mm; Heads count: 4 (20-25, 25-30, 30-40, 40-50mm) -Setting Rings: 25, 40

GBP 729.99
1

Gordon Measurement 3-6mm Mechanical Three Point Internal Micrometer Set

Gordon Measurement 3-6mm Mechanical Three Point Internal Micrometer Set

Product Description The set of internal micrometers that are highly accurate to a strictly minimal variance. For your confidence, they have undergone rigorous testing to guarantee consistent precision and quality. With anvils made of tungsten carbide, the micrometer is resistant to corrosion. These Three Point Bore Micrometers are used for accurately measuring bores. The self-centring measuring head consists of laterally positioned carbide anvils offset at 120 degree intervals. Their design allows these micrometers to measure close to the bottom of a blind bore. Key Features - Accuracy conforms to DIN 863/BS 870 - Corrosion-resistant Tungsten Carbide measuring face/anvils for exceptional durability - Satin-chromed body - Supplied with Setting Rings and Extension Rods - Constant force ratchet stop to ensure consistent measurement - House in a fitted case with adjustment spanner - No batteries required Specification -Mechanical Three Point Internal Micrometer Set -Range: 3-6mm; Heads count: 3 (3-4, 4-5, 5-6mm) -Setting Rings: 4, 5, 6

GBP 699.99
1

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 2

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M112, Grade 2 (Workshop Grade) , Comply with Standard: DIN 861 -Contains 112 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005 (3 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 25 (0.5 increments, 48 pcs) -50 - 100 (25.0 increments, 3 pcs)

GBP 1999.99
1

Gordon Measurement M88 Tungsten Carbide Gauge Block Set - Grade 2

Gordon Measurement M88 Tungsten Carbide Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M88, Grade 2 (Workshop Grade) , Comply with Standard: DIN 861 -Contains 88 Pieces of Small Blocks -Composition (mm) : -1.0005 (1 pc) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -0.5 - 9.5 (0.5 increments, 19 pcs) -10 - 100 (10.0 increments, 10 pcs)

GBP 1699.99
1

Gordon Measurement M32 Tungsten Carbide Gauge Block Set - Grade 0

Gordon Measurement M32 Tungsten Carbide Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M32, Grade 0 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 32 Pieces of Small Blocks -Composition (mm) : -1.005 (1 pc) -1.01 - 1.09 (0.01 increments, 9 pcs) -1.1 - 1.9 (0.1 increments, 9 pcs) -1 - 9 (1.0 increments, 9 pcs) -10 - 50 (10 increments, 4 pcs)

GBP 1099.99
1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E81, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 1899.99
1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 2

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E81, Grade 2 (Workshop Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 1699.99
1

Gordon Measurement M47 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement M47 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M47, Grade 1 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 47 Pieces of Small Blocks -Composition (mm) : -1.005 (1 pc) -1.01 - 1.2 (0.01 increments, 20 pcs) -1.3 - 1.9 (0.1 increments, 7 pcs) -1 - 9 (1.0 increments, 9 pcs) -10 - 100 (10 increments, 10 pcs)

GBP 1629.99
1

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M112, Grade 1 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 112 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005 (3 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 25 (0.5 increments, 48 pcs) -50 - 100 (25.0 increments, 3 pcs)

GBP 2199.99
1

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 0

Gordon Measurement M112 Tungsten Carbide Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M112, Grade 0 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 112 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005 (3 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 25 (0.5 increments, 48 pcs) -50 - 100 (25.0 increments, 3 pcs)

GBP 2999.99
1

Gordon Measurement M88 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement M88 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M88, Grade 1 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 88 Pieces of Small Blocks -Composition (mm) : -1.0005 (1 pc) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -0.5 - 9.5 (0.5 increments, 19 pcs) -10 - 100 (10.0 increments, 10 pcs)

GBP 1899.99
1

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 0

Gordon Measurement E81 Tungsten Carbide Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E81, Grade 0 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 81 Pieces of Small Blocks -Composition (inch) : -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.149 (0.001 increments, 49 pcs) -0.05 - 0.95 (0.05 increments, 19 pcs) -1 - 4 (1.0 increments, 4 pcs)

GBP 2599.99
1

Gordon Measurement M88 Tungsten Carbide Gauge Block Set - Grade 0

Gordon Measurement M88 Tungsten Carbide Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M88, Grade 0 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 88 Pieces of Small Blocks -Composition (mm) : -1.0005 (1 pc) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -0.5 - 9.5 (0.5 increments, 19 pcs) -10 - 100 (10.0 increments, 10 pcs)

GBP 2599.99
1

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 1

Gordon Measurement E36 Tungsten Carbide Gauge Block Set - Grade 1

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Imperial Tungsten Carbide Gauge Block Set -E36, Grade 1 (Inspection Grade) , Comply with Standard: BS EN ISO 3650 -Contains 36 Pieces of Small Blocks -Composition (inch) : -0.05, 1, 2, 4 (4 pcs) -0.1001 - 0.1009 (0.0001 increments, 9 pcs) -0.101 - 0.109 (0.001 increments, 9 pcs) -0.11 - 0.19 (0.01 increments, 9 pcs) -0.1 - 0.5 (0.1 increments, 5 pcs)

GBP 1139.99
1

Gordon Measurement M47 Tungsten Carbide Gauge Block Set - Grade 2

Gordon Measurement M47 Tungsten Carbide Gauge Block Set - Grade 2

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M47, Grade 2 (Workshop Grade) , Comply with Standard: DIN 861 -Contains 47 Pieces of Small Blocks -Composition (mm) : -1.005 (1 pc) -1.01 - 1.2 (0.01 increments, 20 pcs) -1.3 - 1.9 (0.1 increments, 7 pcs) -1 - 9 (1.0 increments, 9 pcs) -10 - 100 (10 increments, 10 pcs)

GBP 1429.99
1

Gordon Measurement M122 Tungsten Carbide Gauge Block Set - Grade 0

Gordon Measurement M122 Tungsten Carbide Gauge Block Set - Grade 0

Product Description A set of gauge blocks, also known as gauge slips, made from high quality Tungsten Carbide. Each gauge block is marked with a traceable serial number. The gauge blocks are housed in a tailor made fitted protective case with sizes clearly labelled. Key Features - Tungsten Carbide material for highly increased durability and protection against machining workshop wear - Available in 4 grades: Grade K for Calibration, Grade 0 for Calibration, Grade 1 for Inspection, Grade 2 for workshop - High quality surface finish and high dimensional stability - Working surface hardness greater than 63HRC - Heat treated for high resistance to wear - Conforms to ISO standards for guaranteed accuracy and reliability - Supplied in a tailor made fitted wooden box/case Specification -Metric Tungsten Carbide Gauge Block Set -M122, Grade 0 (Inspection Grade) , Comply with Standard: DIN 861 -Contains 122 Pieces of Small Blocks -Composition (mm) : -0.5, 1.0, 1.0005, 75.0 (4 pcs) -1.001 - 1.009 (0.001 increments, 9 pcs) -1.01 - 1.49 (0.01 increments, 49 pcs) -1.5 - 1.9 (0.1 increments, 5 pcs) -2.0 - 25 (0.5 increments, 47 pcs) -30 - 100 (10.0 increments, 8 pcs)

GBP 3199.99
1