216 results (0,60574 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Gent ALD-302 Anti Ligature Base for the S-Quad Sensor Requires S4-700 Base

Gent ALD-302 Anti Ligature Base for the S-Quad Sensor Requires S4-700 Base

Gent ALD-302 Anti Ligature Base for the S-Quad Sensor Requires S4-700 BaseAnti-ligature base for the S-Quad Sensor Requires S4-700 baseThe S-Quad Anti Ligature Ceiling Mounted Base provides additional safety to occupants within secure facilities.The base has been designed with the entire S-Quad range and provides additional safety within buildings that accommodate people who are at risk.Approved for in-cell detection by the National Offender Management Service NOMS in England it now has an anti-tamper lip to prevent the storage of contraband between base detector.

GBP 216.56
1

Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface

Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface

Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the InterfaceThe 19104-52 is a DIN rail mounting polarised relay designed for use with the S4-34440-02 and S4-34440-12 interface units.Gent provides a range of relays to house applications involving switching and timers.They are manufactured from an all-purpose polycarbonate and are suitable for activating class changes and start work signals.

GBP 59.45
1

Gent VIG-NC-SMF Fibre Optic Network Card for VIG1-24 and VIG1-72 Vigilon Panels

Gent VIG-NC-SMF Fibre Optic Network Card for VIG1-24 and VIG1-72 Vigilon Panels

Gent VIG-NC-SMF Fibre Optic Network Card for VIG1-24 and VIG1-72 Vigilon PanelsThe Single Mode Fibre Network Card VIG-NC-SMF allows a fast and reliable network over distances of up to 20km between Vigilon Plus Panels VIGPLUS-24 VIGPLUS-72 Network Nodes VIGPLUS-NODE.The Single Mode Fibre Network card is designed to plug into the backplane of a panel or node in dedicated slots.Key FeaturesFibre optic connects directly to the sockets on the card.Up to 31 panelsnodes on a single network.Up to 200 panelsnodes on a complex networkEN54 V3 Single-Mode FibreConnection is by means of the ST sockets on the SM Fibre Network card.100g weight approximateOperating Temperature 0C to 45CStorage Temperature -10C to 55C

GBP 843.34
1

Gent VIG-NC-V3 Network Card V3

Gent VIG-NC-V3 Network Card V3

Gent VIG-NC-V3 Network Card V3This network card is used to allow messages of status and control data to pass between control panels and network or terminal nodes in a networked fire system. The card must be plugged into the backplane of each panel and node in a dedicated slot. When it is plugged into the slot P8 on the backplane the external cables must be connected to terminal block P10 which is also located on the backplane. The dual-in-line switches on the card are set to program the address number and baud rate.This network card can be installed inVigilon or 34K Fire PanelsVIG1-V3 or 34K1-V3VIG1-NET-V3VIG2-V3VIG2-NET-V3VIG3-V3VIG3-NET-V3VIG4-V3VIG4-NET -V3Vigilon or 34K Network or Terminal NodeVIG-NODE-V3 or 34K-NODE-V3

GBP 1445.48
1

Gent S3-CONTROL HandiLink IR Remote Control

Gent S3-CONTROL HandiLink IR Remote Control

Gent S3-CONTROL HandiLink IR Remote ControlThe S3-CONTROL is a HandiLink IR Remote Control which has been designed for use with the S-Cube range of sounders.With the remote control individual sounders can be turned on and the sounder volume adjusted remotely from up to 3m away.The HandiLink IR Remote Control allows the user to adjust individual sounder levels and to turn offon individual sounders without the need for physical access to the unit itself. The facility is only available when the sounders are enabled on the panel and additional password protected access is required to use this facility to ensure parameters are not changed accidentally or with the intention of disrupting the environment.

GBP 140.98
1

Gent 805593.1 Wireless Detector Base

Gent 805593.1 Wireless Detector Base

Gent 805593.1 Wireless Detector BaseWith the IQ8Wireless base the wireless component is located in the base onto which the respective fire detector is placed.The wireless base facilitates the connection of the IQ8Quad TM ROR O OT and OTG detectors via a wireless transmission line to the esser busesser bus-PLus and integrates them via wireless transponder or wireless gateway into the fire alarm system. A maximum of 32 radio bases per wireless transponder andor 10 per radio gateway can be allocated.Key FeaturesIndividual detector identification on the control panelRegular functionality check for each detectorAlarm and operation display on the detectorAlarm and fault transmission in accordance with EN 54-2Easy detector or battery replacement with detector removal toolFault signal when the mounted wireless base and the inserted detector are removedPermanent monitoring of battery voltage

GBP 823.81
1

Gent S4-34492 Small Metal Interface Enclosure

Gent S4-34492 Small Metal Interface Enclosure

Gent S4-34492 Small Metal Interface EnclosureThe S4-34492 is a metal mounting box able to mount S4 interfaces within and features termination points on the enclosure for incoming cables.The Vigilon interfaces are generally supplied without enclosures. A range of enclosures are available if required to house them.Key FeaturesMetal mounting boxAble to mount S4 interfaces withinFeatures termination points on the enclosure for incoming cables

GBP 32.27
1

Gent 805595.10 Wireless Transceiver Interface

Gent 805595.10 Wireless Transceiver Interface

Gent 805595.10 Wireless Transceiver InterfaceThis wireless transponder is designed for wall mounting. The wireless transponder communicates with up to 32 other wireless devices. These can be wireless of various types from intelligent automatic fire detectors or wireless interfaces with manual call points andor alarm signalling devices of the IQ8-family. Using the System IQ8ControlFlexES Control the wireless transponder integrates the intelligent automatic detectors with and without alarm signalling devices manual call point and IQ8Alarm Plus signalling devices in the esserbus esserbus-PLus via the wireless base andor wireless interface.The detector base allows esserbus integration of intelligent automatic detectors as bus devices with individual addressing via the transponder. Up to 10 transponders can be operated on one loop. The transponder can be linked with the loop as well as with a conventional detector zone or it can be operated as a stand-alone unit. Potential-free outputs for common fault and common fire are available. For system 8000 the transponder for RF devices can only be connected by using a potential-free relay to 4 IN2 OUT or 1 IN transponder because it is not compatible with panel 8000 and it cannot be used as a bus device.Key FeaturesRF communication with up to 32 usersmaximum 32 wireless basesmaximum 10 wireless interfaces with IQ8MCP manual call pointsmaximum 10 control groups for wireless interface with IQ8QuadIQ8Alarm Plus alarm signalling devicesesserbus integration of all RF. Devices as individually addressable usersThe RF devices can be assigned in up to 32 detector zonesAlarm and fault transmission in accordance with EN 54-2Connection to esserbus of IQ8Control FlexES Control panels as bus device as well as to a conventional detector zonesStand-alone operationPotential-free outputs for common fault and common fire

GBP 1502.39
1

Gent VIG-BNG-DINKIT Bacnet Gateway Din Rail Mounting Kit for Mains Powered Interfaces S4-34440212

Gent VIG-BNG-DINKIT Bacnet Gateway Din Rail Mounting Kit for Mains Powered Interfaces S4-34440212

Gent VIG-BNG-DINKIT Bacnet Gateway Din Rail Mounting Kit for Mains Powered Interfaces S4-34440212The BACNET-GW-3 provides an interface between NOTIFIERs fire panel network either the standard or the high-speed version and a network using the BACnetIP communication protocol.BACnet protocol is an American National Standard ANSIASHRAE 135-1995. With the Gateway inter- face devices on NFN fire alarm control panels are represented as BACnet objects to the BACnet client.The user subscribes to Event Notification objects per FACP and the BACnet device receives events from objects on the FACP as a result of this subscription.The BACNET-GW-3 can be connected to a stand-alone ONYX panel 9th edition with an available network port or it can be connected to via the network port on any net- work control module.Connected to each BAC- NET-GW-3 can support a maximum of 14 other nodes or 15000 objects. Multiple BACNET-GW-3s can be used to interface with larger networksThe Vigilon BACnet Gateway VIG-BNG provides an interface between a computer network and GENT EN54 Vigilon fire detection and alarm system using BACnet communication protocol.

GBP 37.37
1

Gent VIG-BNG-RW Bacnet Gateway Assembly for Vigilon amp Compact with Controls amp Command Builds

Gent VIG-BNG-RW Bacnet Gateway Assembly for Vigilon amp Compact with Controls amp Command Builds

Gent VIG-BNG-RW Bacnet Gateway Assembly for Vigilon Compact with Controls Command BuildsThe BACNET-GW-3 provides an interface between NOTIFIERs fire panel network either the standard or the high-speed version and a network using the BACnetIP communication protocol.BACnet protocol is an American National Standard ANSIASHRAE 135-1995. With the Gateway inter- face devices on NFN fire alarm control panels are represented as BACnet objects to the BACnet client.The user subscribes to Event Notification objects per FACP and the BACnet device receives events from objects on the FACP as a result of this subscription.The BACNET-GW-3 can be connected to a stand-alone ONYX panel 9th edition with an available network port or it can be connected to via the network port on any net- work control module.Connected to each BAC- NET-GW-3 can support a maximum of 14 other nodes or 15000 objects. Multiple BACNET-GW-3s can be used to interface with larger networksThe Vigilon BACnet Gateway VIG-BNG provides an interface between a computer network and GENT EN54 Vigilon fire detection and alarm system using BACnet communication protocol.

GBP 7753.97
1

Gent S4-34845 Manual Call Point with Protective Cover amp Resettable Element

Gent S4-34845 Manual Call Point with Protective Cover amp Resettable Element

Gent S4-34845 Manual Call Point with Protective Cover Resettable Element The S4-34845 is a Addressable Manual Call Point MCP from the Gent range. The S4-34845 has an response time of less than 1 second. The S4-34845 Manual Call Point comes with a protective cover and also comes with the resettable element which can be done at any given time using a Call Point Test Key seen in the related products.The Addressable Range of Gent Manual Call Points MCP are for the Vigilon and Nano System which are easy to install and have the ability to be mounted on standard installation back boxes or they can be mounted on bespoke red back boxes for surface mounting.Other Manual Call Points from the Gent Addressable range include S4-34800 which is the standard Glass Manual Call Point The S4-34805 which is a Manual Call Point with the Resettable Element and the S4-34842 which is a Manual Call Point with the Protective Cover.Key FeaturesTo be used with Gent Vigilon and Gent Compact fire alarmsProtective coverPrevents unauthorised alarms being raised

GBP 73.88
1

Gent VIG-LPC-EN Vigilon Loop Card EN54

Gent VIG-LPC-EN Vigilon Loop Card EN54

Gent VIG-LPC-EN Vigilon Loop Card EN54The VIG-LPC-EN is an additional Loop Card for Gent Vigilon Panels.The new Loop Card is designed to fully comply with EN54-23 and is available on EN54 versions of the Vigilon range of panels. The increased power allows for up to 100 EN54-23 sensor-sounder-strobes on a 2km loop managing up to 200 devices in total.Key FeaturesCompatible with VIGPLUS-24 VIGPLUS-72 Vigilon Fire Alarm Control PanelsIncreased capacity for loop powered devices including the new EN54-23 visual alarm devicesSupports longer loop lengths up to 2km Use of the loop load design tool may result in longer loops being allowedLoop current increased to 800mA when used with the latest S-Quad and S-Cubed devices

GBP 629.32
1

Gent 585002 Mains Switching Unit

Gent 585002 Mains Switching Unit

Gent 585002 Mains Switching UnitThe MSU Main Switching Unit is used to secure the power supply of all VARIODYN ONE components that are installed in a rack. In addition it offers a connector for connecting a service PC for localnetwork-wide maintenance purposes.All connected PAVA system components can be switched ON or OFF by using the switches. On detecting a short circuit or an overload protective function is automatically triggered and the connected PAVA system components are disconnected from the power supply.Key Features3 over current switches with lamp one per phaseGreen indicator lights to display switching status3 connections for auxiliary changeover contacts for each overcurrent switch230 V IEC power socketRJ45 socket enables ease of maintenance through a PC laptop

GBP 935.92
1

Gent 17860-01 Rate Of Rise Heat Detector

Gent 17860-01 Rate Of Rise Heat Detector

Gent 17860-01 Rate Of Rise Heat DetectorThe Gent 17860-01 Heat Detector is a rate of rise type sensor ideal for use on modern conventional fire alarm systems.Heat detectors may be used in areas where smoke detectors will suffer from false triggers due to dust or fumes arising from the use of the area The 7800 heat detectors use the same standard base as the smoke detectors and allow all areas of a building to be protected.Key FeaturesConventionalLegacy product

GBP 12.32
1

Gent 2.8M Venturi Tube for Duct Housing S4-34760-28

Gent 2.8M Venturi Tube for Duct Housing S4-34760-28

Gent 2.8M Venturi Tube for Duct Housing S4-34760-28The S4-34760-28 from Gent is a 2.8 Venturi Tube for use with Duct Smoke Sensors.This product is designed for installation on a loop circuit of a Vigilon system. An optical smoke sensor specifically designed for use in ventilation ducting. A venturi probe samples the air in the duct for smoke. Detector housing is mounted externally to the duct. This device can trigger the shut-down of an air-conditioning or ventilation plant to prevent the spread of smoke.

GBP 203.83
1

Gent COMPACT-NC Compact Network Card

Gent COMPACT-NC Compact Network Card

Gent COMPACT-NC Compact Network CardThe COMPACT-NC is a Compact Network Card for Vigilon Compact Control Panels.This copper network card is used to allow data to pass between control panels in a Vigilon Compact networked fire system. The card must be plugged into the Master Control board MCB of the panel in a dedicated slot CARD 2. The card has terminals to accept external network wiring. A bank of dual-in-line switches on the card allow setting of address number and baud rate.Key FeaturesLinks together 2 or more Vigilon Compact or Vigilon Compact Plus fire alarm panels.Expands the Vigilon compact panel

GBP 1013.20
1

Gent VSINTM-PCB02 Spare PCB for S4 Mains Powered Interface - 1.5A S4-34440-02

Gent VSINTM-PCB02 Spare PCB for S4 Mains Powered Interface - 1.5A S4-34440-02

Gent VSINTM-PCB02 Spare PCB for S4 Mains Powered Interface - 1.5A S4-34440-02VSINTM-PCB02 is a spare PCB for the S4 Mains Powered Interface - 1.5A - Product codeS4-34440-02The Gent Interface range features several different types of interfaces which can be used depending on the requirements of the individual site.Gent Low Voltage InterfacesThe standard Gent Interfaces are low voltage versions which are ideal for connecting the fire alarm system to standard services around a building. There are both input and output versions available with a variety of numbers of channels. To compliment the interface range there is also various mounting options to pick from.Gent Mains Rated Interfaces for Vigilon SystemsFor applications where the interface is required to be mains rated there are options available. These units are capable of switching a 240v supply on activation of a fire alarm system. They are ideal for connecting the fire system to services such as roller shutter doors or door systems using a mains voltage.Gent Vigilon Interfaces with Metal EnclosuresThere are new Gent interfaces available which use a plastic type enclosure. However traditionally the Gent Interface range used a metal housing.

GBP 580.91
1