28 results (0,18136 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Evolution Power Tools R255SMS+ 255mm Multi-material Sliding Mitre Saw 230V

Evolution Power Tools R255SMS+ 255mm Multi-material Sliding Mitre Saw 230V

The Evolution R255SMS+ 255mm multi-material sliding mitre saw is ideal for on-site use. The saw can cut a variety of materials such as mild steel, wood even with embedded nails, aluminium, plastic, copper and more thanks to the 28 tooth TCT blade and optimised gearbox and motor speed. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. Features: Multi-Material - Premium Japanese tungsten carbide tipped (TCT) blade included cuts steel, aluminium, wood with embedded nails, plastic and more. Powerful - 2000W optimised gearbox and blade system, increases motor and blade life to cut through a variety of materials with ease. Accurate - Precision cutting with laser guidance, trench cut facility, 300 mm slide, 0 - 45 bevel and 50 - 50 mitre settings, covers all common cutting angles. 300 x 80 mm cross cut capacity. Cutting Steel: Mild Steel Plate - Max Thickness 6mm. Mild Steel Box Section - Max Wall Thickness.

GBP 269.99
1

Evolution Power Tools RAGE5-S 255mm Professional TCT Multi-Purpose Table Saw 110V

Evolution Power Tools RAGE5-S 255mm Professional TCT Multi-Purpose Table Saw 110V

Evolution RAGE5-S 255mm Multipurpose Table Saw cuts Steel, Aluminium & Wood with one saw & one blade. The Evolution Rage5-S is a multipurpose table saw with a blade which cuts a variety of materials including mild steel, non-ferrous metals, wood and even wood with embedded nails. It will cut plastic too and all with a single blade. No blade changes = Faster work! Features and Benefits: When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to the touch, creating an instant workable finish. This RAGE5-S table saw is optimized to cut mild steel, non-ferrous metals, plastic, wood, even wood with embedded nails with a single blade. Faster working through no blade changes. Fully adjustable blade with rise and fall 0-80mm and the tilt capacity 45 to the left hand, allows great cutting versatility. Max 2500rpm no load speed performing 650mm rip capacity to the right, 83mm max cut at 90, 58mm max cut at 45. Sliding carriage system is available to the left-hand side. Other features include an integral 'foldaway' stand with handle & wheels. The mitre gauge with an adjustable face-plate incorporates quick-access positive angle stops from -60 to +60. Multifunction, versatile table-top with integral quick-deploy table extensions to both the right & left-hand sides. INCLUDES: RAGE255 x28 Tooth Multipurpose blade, push stick, folding leg stand & 3 Year Warranty

GBP 399.99
1

Evolution Power Tools RAGE 5-S Multi-Purpose Table Saw 255mm 1800W 240V EVLRAGE5S

Evolution Power Tools RAGE 5-S Multi-Purpose Table Saw 255mm 1800W 240V EVLRAGE5S

The Evolution RAGE 5-S Multi-Purpose Table Saw cuts through a variety of materials including plastic, mild steel, non-ferrous metals, wood and even wood with embedded nails, all with a single blade. Meaning you are never required to change blades, for faster work and less downtime. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish. With a fully adjustable blade, with a rise and fall (0-80mm) and the tilt capacity (45 to the left hand), for great cutting versatility and a sliding carriage system is available to the left-hand side. The mitre gauge with an adjustable face-plate incorporates quick-access positive angle stops from -60 to +60. Multi-Function, versatile table-top with integral quick-deploy table extensions to the right and left-hand sides. Specification: Input Power: 240V 1,800W, 110V 1,600WNo Load Speed: 2,500/min.Blade: 255 x 25.4mm Bore.Capacity: Mild Steel Plate 6mm, Wood@90 83mm, Wood@45 58mm.Rip Capacity: Left/Right 305/650mm.Riving Knife Thickness: 1.8mm.Table Surface Area: Min.: 745 x 640mm, Max.: 1,200 x 640mm.Dimensions with Leg Assembly (HxWxL): 1050 x 750 x 940mm.Dimensions without Leg Assembly (HxWxL): 880 x 730 x 330mm.Sound Pressure Level LPA: 93.2 dB(A).Weight: 28.5kg.

GBP 359.99
2

Evolution Power Tools F255SMS TCT Multi-Material Sliding Mitre Saw 255mm 1600W 240V EVLF255SMS

Evolution Power Tools F255SMS TCT Multi-Material Sliding Mitre Saw 255mm 1600W 240V EVLF255SMS

The Evolution F255SMS Multi-Material Sliding Mitre Saw utilises patented Evolution multipurpose cutting technology and will cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. Laser guidance provides optimum accuracy and the robust outer casing enhances durability. The F255SMS Mitre Saw is safer, faster and more economical than abrasive metal cutting saws. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish. Supplied with: 1 x FURY Multipurpose TCT Circular Saw Blade 255 x 25.4mm x 24T, 1 x F255SMS Work Piece Top Clamp, 1 x Dual Ended (Blade Change) Allen Key 4 & 6mm & 1 x Dust Bag. Specification: Input Power: 1,600W.No Load Speed: 3,750/min.Cutting Capacity (W x D): Cross Cut (0 x 0): 300 x 80mm, Bevel Cut (0 x 45): 300 x 45mm, Mitre Cut (45 x 0): 210 x 80mm, Compound Cut (45 x 45): 210 x 45mm.Blade Size: 255 x 25.4mm Bore.Max. Mitre Left/Right: 50/50.Max. Bevel Left: 45.Dust Port : 35mm.Sound Pressure Level LPA: 95.8 dB(A).Cable Length: 2m.Weight: 15.4kg.

GBP 219.99
1

Evolution Power Tools R255SMS+ Pro Multi-material Sliding Mitre Saw 255mm 2000W 240V

Evolution Power Tools R255SMS+ Pro Multi-material Sliding Mitre Saw 255mm 2000W 240V

The Evolution R255SMS+ Pro Multi-Material Sliding Mitre Saw utilises patented Evolution RAGE multi-material cutting technology. It is optimised to cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. Laser guidance provides optimum accuracy and dual quick release clamps for additional safety and faster adjustments. The R255SMS+ Sliding Mitre Saw is safer, faster and more economical than abrasive metal cutting saws. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The sliding rail protector protects against damage and prevents dust ingress for increased work life and durability. It is lightweight and portable, integrated handles make it easy to carry and transport around the workplace. This is the Pro Version and is supplied with 1 x RAGE Multipurpose Circular Saw Blade 255 x 25.4mm x 28T, 1 x 3 Piece Toe Clamp, 1 x Work Piece Front Clamp, 1 x Dust Bag & 1 x Dual Ended Allen Key 4 & 6mm. Specification Input Power 240V 2,000W, 110V 1,600W No Load Speed 2,500/min. Cutting Capacity (W x D) Cross Cut (0 x 0) 300 x 80mm Bevel Cut (0 x 45) 300 x 45mm Mitre Cut (45 x 0) 210 x 80mm Compound Cut (45 x 45) 210 x 45mm Max. Mitre (Left/Right) 50/50 Max. Bevel (Left) 45 Blade 255 x 25.4mm Bore Dust Port & Oslash 35mm Cable Length 3m Weight 16.3kg

GBP 239.99
1

Evolution Power Tools R210SMS-300+ Pro Multi-Material Sliding Mitre Saw 210mm 1500W 110V EVLR210S300L

Evolution Power Tools R210SMS-300+ Pro Multi-Material Sliding Mitre Saw 210mm 1500W 110V EVLR210S300L

The Evolution R210SMS-300+ Pro Multi-Material Sliding Mitre Saw utilises patented Evolution RAGE multi-material cutting technology. It is optimised to cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. Fitted with top and bottom dual quick release clamps for additional accuracy and faster adjustments. The R210SMS-300+ Sliding Mitre Saw is safer, faster and more economical than abrasive metal cutting saws. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. It is lightweight and portable, integrated handles make it easy to carry and transport around the workplace. Supplied with: 1 x RAGE Multipurpose Circular Saw Blade 210 x 25.4mm x 24T, 1 x Top Clamp, 1 x Front Clamp, 1 x Dust Bag, 1 x Dust Port Adaptor, 1 x Dual End Hex Key (M5/M6) & 1 x Instruction Manual. Specification: Input Power: 1,500W.No Load Speed: 3,750/min.Cutting Capacity (W x D): Cross Cut (0 x 0): 300 x 65mm, Bevel Cut (0 x 45): 210 x 65mm, Mitre Cut (45 x 0): 300 x 38mm, Compound Cut (45 x 45): 210 x 38mm.Max. Mitre (Left/Right): 50/50.Max. Bevel (Left): 45.Blade: 210 x 25.4mm Bore.Cable Length: 3m.Sound Pressure Level LPA: 96.5 dB(A).Weight: 13.2kg.

GBP 199.99
2

Evolution Power Tools R210SMS-300+ Pro Multi-Material Sliding Mitre Saw 210mm 1500W 240V EVLR210S300

Evolution Power Tools R210SMS-300+ Pro Multi-Material Sliding Mitre Saw 210mm 1500W 240V EVLR210S300

The Evolution R210SMS-300+ Pro Multi-Material Sliding Mitre Saw utilises patented Evolution RAGE multi-material cutting technology. It is optimised to cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. Fitted with top and bottom dual quick release clamps for additional accuracy and faster adjustments. The R210SMS-300+ Sliding Mitre Saw is safer, faster and more economical than abrasive metal cutting saws. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. It is lightweight and portable, integrated handles make it easy to carry and transport around the workplace. Supplied with: 1 x RAGE Multipurpose Circular Saw Blade 210 x 25.4mm x 24T, 1 x Top Clamp, 1 x Front Clamp, 1 x Dust Bag, 1 x Dust Port Adaptor, 1 x Dual End Hex Key (M5/M6) & 1 x Instruction Manual. Specification: Input Power: 1,500W.No Load Speed: 3,750/min.Cutting Capacity (W x D): Cross Cut (0 x 0): 300 x 65mm, Bevel Cut (0 x 45): 210 x 65mm, Mitre Cut (45 x 0): 300 x 38mm, Compound Cut (45 x 45): 210 x 38mm.Max. Mitre (Left/Right): 50/50.Max. Bevel (Left): 45.Blade: 210 x 25.4mm Bore.Cable Length: 3m.Sound Pressure Level LPA: 96.5 dB(A).Weight: 13.2kg.

GBP 199.99
1

Evolution Power Tools R255SMS-DB+ Multi-material Sliding Mitre Saw 255mm 1600W 110V

Evolution Power Tools R255SMS-DB+ Multi-material Sliding Mitre Saw 255mm 1600W 110V

The Evolution R255SMS-DB+ Multi-Material Sliding Mitre Saw is ideal for on-site use and can cut a variety of materials such as wood, mild steel, wood even with embedded nails, aluminium, plastic, copper and more, thanks to the 28 tooth TCT blade and optimised gearbox and motor speed. When cutting mild steel, the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods.The double bevel facility reduces the need to re-adjust workpiece making it the ultimate saw for the workshop or on the job site, with a huge 300 x 80mm cutting capacity ideal for cutting copper pipe, plastic pipe, aluminium channel, cable tray, armoured cable, scaffold boards, skirting board, architraves, MDF, hardwood such as oak and ash, plus much more. When working with reclaimed timber the saw has no problem cutting through embedded nails, screws or staples. The optional diamond blade (sold separately) completes the package, enabling you to cut brick, stone, concrete and unglazed tiles.Supplied with: 1 x R255-TCT Multi-Material Cutting Blade (28T), 1 x WD255 Wood Blade (40T), 1 x Top Clamp, 1 x Front Clamp, 1 x Dust Bag, 1 x Dust Port Adaptor, 1 x Dual End Hex Key (M5 & M6) and 1 x Instruction Manual.Specification:Input Power: 240V: 2,000W, 110V: 1,600WNo Load Speed: 2,600/min.Sound Pressure Level LPA: 96.9 dB(A).Laser Class: 2.Laser Source: Laser Diode.Cutting Capacity (Mitre x Bevel: Width x Depth):0 x 0: 300 x 90mm0 x 45 Left: 300 x 52mm, 0 x 45 Right: 300 x 34mm45 x 0: 212 x 90mm45 x 45 Left: 212 x 52mm, 45 x 45 Right: 212 x 34mmCutting Capacity:Mild Steel Plate: Max. Thickness 6mmMild Steel Box Section: Max. Wall Thickness 3mmWood: Max Section 300 x 80mmMax. Mitre (Left/Right): 50/50Max. Bevel (Left/Right): 45/45Blade: 255 x 25.4mm BoreDust Port : 35mmWeight: 18.3kg

GBP 349.99
1

Evolution Power Tools FURY5-S Multi-Purpose Table Saw 255mm 1500W 240V EVLFURY5TSAW

Evolution Power Tools FURY5-S Multi-Purpose Table Saw 255mm 1500W 240V EVLFURY5TSAW

The Evolution FURY 5-S Multi-Purpose Table Saw utilises patented Evolution multipurpose cutting technology, meaning it can cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. Featuring a quick clamp, parallel rip fence with measuring rail guide for accurate and assisted rip cutting. A push stick is also provided for safer operation when cutting smaller off cuts. The FURY 5-S is safer, faster and more economical than abrasive metal cutting saws. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish. Supplied with 1 x F255TCT-24T Multi-Purpose Blade 255 x 25.4mm x 24T 2 x Table Extensions 4 x Extension Table Support Struts 2 x Blade Changing Tools 1 x Mitre Gauge 1 x Anti-bounce Device 1 x Adjustable Rip Fence 2 x Rear Cantilever Braces 1 x Push Stick 2 x Fence Rails 1 x Table Saw Stand (when assembled) 1 x Allen Key 1 x Spanner 1 x Fence Locating Bar 1 x Instruction Manual Specification Input Power 1,500W No Load Speed 3,250/min. Blade 255 x 25.4mm Capacity Wood Rip/Cross Cut (0) Wood 85mm, Bevel Cut (45) Wood 65mm Rip Capacity (Right) 410mm Cutting Capacity Steel 3mm Riving Knife Thickness 1.8mm Overall Table Size 938 x 642mm Weight 23kg

GBP 209.99
1

Evolution Power Tools R255SMS-DB+ Multi-Material Sliding Mitre Saw 255mm 2000W 240V EVLR255SMSDB

Evolution Power Tools R255SMS-DB+ Multi-Material Sliding Mitre Saw 255mm 2000W 240V EVLR255SMSDB

The Evolution R255SMS-DB+ Multi-Material Sliding Mitre Saw is ideal for on-site use and can cut a variety of materials such as wood, mild steel, wood even with embedded nails, aluminium, plastic, copper and more, thanks to the 28 tooth TCT blade and optimised gearbox and motor speed. When cutting mild steel, the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods.The double bevel facility reduces the need to re-adjust workpiece making it the ultimate saw for the workshop or on the job site, with a huge 300 x 80mm cutting capacity ideal for cutting copper pipe, plastic pipe, aluminium channel, cable tray, armoured cable, scaffold boards, skirting board, architraves, MDF, hardwood such as oak and ash, plus much more. When working with reclaimed timber the saw has no problem cutting through embedded nails, screws or staples. The optional diamond blade (sold separately) completes the package, enabling you to cut brick, stone, concrete and unglazed tiles.Supplied with: 1 x R255-TCT Multi-Material Cutting Blade (28T), 1 x WD255 Wood Blade (40T), 1 x Top Clamp, 1 x Front Clamp, 1 x Dust Bag, 1 x Dust Port Adaptor, 1 x Dual End Hex Key (M5 & M6) and 1 x Instruction Manual.Specification:Input Power: 240V: 2,000W, 110V: 1,600WNo Load Speed: 2,600/min.Sound Pressure Level LPA: 96.9 dB(A).Laser Class: 2.Laser Source: Laser Diode.Cutting Capacity (Mitre x Bevel: Width x Depth):0 x 0: 300 x 90mm0 x 45 Left: 300 x 52mm, 0 x 45 Right: 300 x 34mm45 x 0: 212 x 90mm45 x 45 Left: 212 x 52mm, 45 x 45 Right: 212 x 34mmCutting Capacity:Mild Steel Plate: Max. Thickness 6mmMild Steel Box Section: Max. Wall Thickness 3mmWood: Max Section 300 x 80mmMax. Mitre (Left/Right): 50/50Max. Bevel (Left/Right): 45/45Blade: 255 x 25.4mm BoreDust Port : 35mmWeight: 18.3kg

GBP 349.99
1

Evolution Power Tools FURY5-S Plus Multi-Purpose Table Saw 1500W 240V

Evolution Power Tools FURY5-S Plus Multi-Purpose Table Saw 1500W 240V

The Evolution FURY 5-S Plus Multi-Purpose Table Saw is ideal for any home workshop. The FURY 5-S provides tremendous cutting versatility including, cross cut, mitre cut, bevel cut, straight cut for large or small applications. It will easily cut steel, aluminium, wood (even wood with nails) and plastic, using just one blade. Features a rip fence that is solid and sturdy in every position for essential cutting security, furthermore, the included anti-bounce device minimises material movement. Supplied with: 1 x Multipurpose Blade 255 x 25.4mm Bore x 24T1 x Fine Wood Blade 255 x 25.4mm Bore x 60T2 x Table Extensions4 x Extension Table Support Struts2 x Blade Changing Tools1 x Mitre Gauge1 x Anti-Bounce Device1 x Adjustable Rip Fence2 x Rear Cantilever Braces1 x Push Stick2 x Fence Rails1 x Table Saw Stand (requires assembly)1 x Hex Key1 x Spanner1 x Fence Locating Bar1 x Instruction Manual Specification: Input Power: 1,500WNo Load Speed; 3,250/min.Capacity: Wood 32mm, Mild Steel Plate/Box Section 3mmMax. Cutting Depth: 90 85mm, 45 65mmTable Dimensions: 583 x 901mmRiving Knife Thickness: 1.8mmBlade: 255 x 25.4mm Bore x 24TWeight: 20.14kg

GBP 219.99
1

Evolution Power Tools R355CPS Multi-Material Chop Saw 1800W 110V EVLR355CPSL

Evolution Power Tools R355CPS Multi-Material Chop Saw 1800W 110V EVLR355CPSL

The Evolution R355CPS Multi-Material Chop Saw uses patented Evolution multi-material cutting technology, optimised to cut wood, mild steel, non-ferrous metals, wood with embedded nails and plastic with a single blade. The superiority over abrasive methods are indisputable, leaves a ready-to-weld, accurate, clean and square cold cut with no harmful smoke, no hot sparks or burrs, leaving an instantly workable finish. The hi-torque gearbox reduces motor stresses, improving performance and durability, whilst the adjustable feet and v-clamp make for stress-free working. The ambidextrous and ergonomic trigger allows comfortable repeated cutting, while the ergonomic integrated carry handle allows the R355CPS chop saw to be easily transported from van to the site. Other features include a pressed steel base, head lock down pin, adjustable depth stop, on-board tool storage, 2m cable and a 3-year warranty included, giving you peace of mind. Specification: Input Power: 240V 2,200W, 110V 1,600WNo Load Speed: 1,550/min.Max Mitre:  45Cable Length: 2MSound Pressure Level LPA: 100.5 dB(A). Cutting Capacities (Width x Depth in mm):Mild Steel Square Tube: @90 120 x 120, @45 89 x 89Mild Steel Rectangle Tube: @90 95 x 180, @45 78 x 110Mild Steel Round Tube: @90 130 x 130, @45 105 x 105 Max. Thickness Mild Steel Plate: 6mmMax. Wall Thickness Mild Steel Box Section: 3mm Dimensions (HxWxL) 410 x 530 x 310mmWeight: 23kg

GBP 239.99
2

Evolution Power Tools R355CPS Multi-Material Chop Saw 2200W 240V EVLR355CPS

Evolution Power Tools R355CPS Multi-Material Chop Saw 2200W 240V EVLR355CPS

The Evolution R355CPS Multi-Material Chop Saw uses patented Evolution multi-material cutting technology, optimised to cut wood, mild steel, non-ferrous metals, wood with embedded nails and plastic with a single blade. The superiority over abrasive methods are indisputable, leaves a ready-to-weld, accurate, clean and square cold cut with no harmful smoke, no hot sparks or burrs, leaving an instantly workable finish. The hi-torque gearbox reduces motor stresses, improving performance and durability, whilst the adjustable feet and v-clamp make for stress-free working. The ambidextrous and ergonomic trigger allows comfortable repeated cutting, while the ergonomic integrated carry handle allows the R355CPS chop saw to be easily transported from van to the site. Other features include a pressed steel base, head lock down pin, adjustable depth stop, on-board tool storage, 2m cable and a 3-year warranty included, giving you peace of mind. Specification: Input Power: 240V 2,200W, 110V 1,600WNo Load Speed: 1,550/min.Max Mitre:  45Cable Length: 2MSound Pressure Level LPA: 100.5 dB(A). Cutting Capacities (Width x Depth in mm):Mild Steel Square Tube: @90 120 x 120, @45 89 x 89Mild Steel Rectangle Tube: @90 95 x 180, @45 78 x 110Mild Steel Round Tube: @90 130 x 130, @45 105 x 105 Max. Thickness Mild Steel Plate: 6mmMax. Wall Thickness Mild Steel Box Section: 3mm Dimensions (HxWxL) 410 x 530 x 310mmWeight: 23kg

GBP 239.99
1

Evolution Power Tools RAGE 5-S Multi-Purpose Table Saw 255mm 1600W 110V EVLRAGE5SL

Evolution Power Tools RAGE 5-S Multi-Purpose Table Saw 255mm 1600W 110V EVLRAGE5SL

The Evolution RAGE 5-S Multi-Purpose Table Saw cuts through a variety of materials including plastic, mild steel, non-ferrous metals, wood and even wood with embedded nails, all with a single blade. Meaning you are never required to change blades, for faster work and less downtime. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish. With a fully adjustable blade, with a rise and fall (0-80mm) and the tilt capacity (45 to the left hand), for great cutting versatility and a sliding carriage system is available to the left-hand side. The mitre gauge with an adjustable face-plate incorporates quick-access positive angle stops from -60 to +60. Multi-Function, versatile table-top with integral quick-deploy table extensions to the right and left-hand sides. Specification: Input Power: 240V 1,800W, 110V 1,600WNo Load Speed: 2,500/min.Blade: 255 x 25.4mm Bore.Capacity: Mild Steel Plate 6mm, Wood@90 83mm, Wood@45 58mm.Rip Capacity: Left/Right 305/650mm.Riving Knife Thickness: 1.8mm.Table Surface Area: Min.: 745 x 640mm, Max.: 1,200 x 640mm.Dimensions with Leg Assembly (HxWxL): 1050 x 750 x 940mm.Dimensions without Leg Assembly (HxWxL): 880 x 730 x 330mm.Sound Pressure Level LPA: 93.2 dB(A).Weight: 28.5kg.

GBP 359.99
1

Evolution Power Tools S355CPS Industrial Chop Saw 2200W 240V EVLS355CPS

Evolution Power Tools S355CPS Industrial Chop Saw 2200W 240V EVLS355CPS

The Evolution S355CPS Industrial Chop Saw is ideal for cutting steel plate, square tube, angle iron, pipe and metal roofing. When cutting steel, it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks unlike alternative methods. The high-speed carbide-tipped blade gives you a finished product with a straight, clean edge. Fast action swivel vice enables cuts to be made from 0-45. A hi-torque gearbox reduces motor load and improves performance, and a pull-out collection tray makes it easy to dispose of metal chips. Supplied with: 1 x M355TCT-66 355mm Mild Steel Blade, 1 x Hex Key 8mm, 1 x V-Block and 1 x Instruction Manual. Specification: Input Power: 2,200W.No Load Speed: 1,550/min.Mild Steel Plate (Max Thickness): 6mm.Stainless Steel Plate (Max Thickness): 5mm.Square Tube: @90 120mm, @45 89mm.Rectangle Tube: @90 95 x 180mm, @45 78 x 110mm.Round Tube: @90 130mm, @45 105mm.Sound Pressure Level LPA: 94.9 dB(A).Cable Length: 3M.Weight: 23kg.

GBP 319.99
2

Evolution Power Tools S355CPS Industrial Chop Saw 2200W 110V EVLS355CPSL

Evolution Power Tools S355CPS Industrial Chop Saw 2200W 110V EVLS355CPSL

The Evolution S355CPS Industrial Chop Saw is ideal for cutting steel plate, square tube, angle iron, pipe and metal roofing. When cutting steel, it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks unlike alternative methods. The high-speed carbide-tipped blade gives you a finished product with a straight, clean edge. Fast action swivel vice enables cuts to be made from 0-45. A hi-torque gearbox reduces motor load and improves performance, and a pull-out collection tray makes it easy to dispose of metal chips. Supplied with: 1 x M355TCT-66 355mm Mild Steel Blade, 1 x Hex Key 8mm, 1 x V-Block and 1 x Instruction Manual. Specification: Input Power: 2,200W.No Load Speed: 1,550/min.Mild Steel Plate (Max Thickness): 6mm.Stainless Steel Plate (Max Thickness): 5mm.Square Tube: @90 120mm, @45 89mm.Rectangle Tube: @90 95 x 180mm, @45 78 x 110mm.Round Tube: @90 130mm, @45 105mm.Sound Pressure Level LPA: 94.9 dB(A).Cable Length: 3M.Weight: 23kg.

GBP 319.99
2

Evolution Power Tools R185SMS-Li Bare Including MP Blade

Evolution Power Tools R185SMS-Li Bare Including MP Blade

The Evolution R185SMS-Li EXT Sliding Mitre Saw with multi-material cutting technology is capable of cutting wood (even with embedded nails), mild steel, aluminium, composites, plastics and more. When cutting mild steel with the supplied blade, the saw produces cool-to-the-touch, burr-free cuts. The LED Shadow Line casts a perfect shadow of the blade kerf onto the workpiece to clearly show its cutting path for true accuracy. Supplied with 1 x Multi-Material Blade 185 x 20mm Bore x 20T, 1 x Dust Bag, 1 x Dust Port Adaptor, 1 x Top Clamp, 1 x Hex Key and 1 x Instruction Manual. Powered by Evolution EXT 18v battery system featuring keep cool technology which keeps the cells cool to maximise run time. Specification No Load Speed 4,200/min. Blade 185 x 20mm Bore x 20T Max. Mitre 50 left & right Max. Bevel 45 left Capacity (Mitre x Bevel) 0 x 0 210 x 58mm, 45 x 0 145 x 58mm, 0 x 45 210 x 40mm, 45 x 45 145 x 40mm Mild Steel Plate Thickness 6mm Max. Weight 8.6kg

GBP 189.99
1

Evolution Power Tools R185CMS-Li Loaded Including 4Ah Battery/Single Charger/MP Blade

Evolution Power Tools R185CMS-Li Loaded Including 4Ah Battery/Single Charger/MP Blade

Evolution R185CMS-Li EXT Compound Mitre Saw with multi-material cutting technology is capable of cutting wood, even with embedded nails, mild steel, aluminium, composites, plastics and more. When cutting mild steel with the supplied blade, the saw produces cool-to-the-touch, burr-free cuts. Its lightweight and compact design is easy to transport and use in confined spaces. The push turntable features a locking screw for easy mitre setting, and locking lever for easy bevel angles. Powered by Evolution EXT 18v battery system featuring keep cool technology, keeps the cells cool to maximise run time. Supplied with 1 x Multi-Material Blade 185 x 20mm x 20T, 1 x Dust Bag, 1 x Dust Port Adaptor, 1 x Top Clamp, 1 x Hex Key and 1 x Instruction Manual. Specification No Load Speed 4,200/min. Blade 185 x 20mm Bore x 20T Max. Mitre 45 left & right Max. Bevel 45 left Capacity (Mitre x Bevel) 0 x 0 105 x 45mm, 45 x 0 75 x 45mm, 0 x 45 105 x 38mm, 45 x 45 75 x 38mm Mild Steel Plate Thickness 6mm Max. Weight 5.9kg

GBP 219.99
1

Evolution Power Tools R185SMS-Li Loaded Including 4Ah Battery/Single Charger/MP Blade

Evolution Power Tools R185SMS-Li Loaded Including 4Ah Battery/Single Charger/MP Blade

The Evolution R185SMS-Li EXT Sliding Mitre Saw with multi-material cutting technology is capable of cutting wood (even with embedded nails), mild steel, aluminium, composites, plastics and more. When cutting mild steel with the supplied blade, the saw produces cool-to-the-touch, burr-free cuts. The LED Shadow Line casts a perfect shadow of the blade kerf onto the workpiece to clearly show its cutting path for true accuracy. Supplied with 1 x Multi-Material Blade 185 x 20mm Bore x 20T, 1 x Dust Bag, 1 x Dust Port Adaptor, 1 x Top Clamp, 1 x Hex Key and 1 x Instruction Manual. Powered by Evolution EXT 18v battery system featuring keep cool technology which keeps the cells cool to maximise run time. Specification No Load Speed 4,200/min. Blade 185 x 20mm Bore x 20T Max. Mitre 50 left & right Max. Bevel 45 left Capacity (Mitre x Bevel) 0 x 0 210 x 58mm, 45 x 0 145 x 58mm, 0 x 45 210 x 40mm, 45 x 45 145 x 40mm Mild Steel Plate Thickness 6mm Max. Weight 8.6kg

GBP 259.99
1