30 results (0,14508 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Elmdene 24Vdc 5A 0.5A Switch Mode Unboxed PSU Module

Elmdene 24Vdc 5A 0.5A Switch Mode Unboxed PSU Module

Elmdene 24Vdc 5A 0.5A Switch Mode Unboxed PSU ModuleHigh efficiency cost effective power supply ideal for use in Fire Access Control and General Security applications. Featuring a regulated 27.6Vdc output supplying continuous full rated current to load and up to an additional 0.5A for charging 2 x 12V standby batteries.The universal mains input voltage enables the power supply to be used across a wide geographical area. The highly efficient switch mode design ensures low operating costs while generating less heat. The modular construction simplifies maintenance.Key FeaturesUniversal mains input voltage 90-264vacAdditional 0.5A to charge 2 x 12V standby batteriesHigh efficiency electronics for reduced running costs and lower operating temperaturesContinuous full rated current to loadModular construction for ease of maintenance installationInstaller safe design with all high voltage electronics fully shroudedReverse battery connection protectionFull electronic short circuit and overload protection on load outputMains transient protection circuitGreen Mains present LEDYellow Fault LEDPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 103.44
1

Elmdene 24Vdc 5A 0.5A Switch Mode PSU 2 x 38Ah Batteries - G2405N-R

Elmdene 24Vdc 5A 0.5A Switch Mode PSU 2 x 38Ah Batteries - G2405N-R

Elmdene 24Vdc 5A 0.5A Switch Mode PSU 2 x 38Ah BatteriesThe 24V dc G Range N Series power supplies has been designed for access control fire systems where compliance with EN54-4 is not required and general-purpose applications. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. The modular range consists of 1A 2A 3A and 5A power variants with full rated current to load and feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protection3 year warrantyFits batteries up to 2 x 38AhH Box Power Supply - 410h x 390w x 90d mmClam LidMains transient protectionLED indication-Mains status-Output or battery fuse fail-Output short circuit or low voltage-Battery low or missingPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 142.90
1

Elmdene 24Vdc 5A 0.5A Switch Mode PSU 2 x 7Ah Batteries - G2405N-C

Elmdene 24Vdc 5A 0.5A Switch Mode PSU 2 x 7Ah Batteries - G2405N-C

Elmdene 24Vdc 5A 0.5A Switch Mode PSU 2 x 7Ah Batteries -G2405N-CThe 24V dc G Range N Series power supplies have been designed for access control fire systems where compliance with EN54-4 is not required and general-purpose applications. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. The modular range consists of 1A 2A 3A and 5A power variants with full rated current to load and feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protection3 year warrantyFits batteries up to 2 x 7AhC Box Power Supply - 275h x 330w x 80d mmHinged LidMains transient protectionLED indication-Mains status-Output or battery fuse fail-Output short circuit or low voltage-Battery low or missingPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 121.67
1

Elmdene G2405BMU 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery Charging

Elmdene G2405BMU 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery Charging

Elmdene G2405BMU 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features0.5A Battery Charging5Amp To Load24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationUn-Boxed27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 140.21
1

Elmdene G13805NU 12V Switch Mode Power Supply Unit 5A Module Only

Elmdene G13805NU 12V Switch Mode Power Supply Unit 5A Module Only

Elmdene G13805NU 12V Switch Mode Power Supply Unit 5A Module OnlyThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty13.8V dc 5A to load Battery Charging Unboxed Module Only SMPSUDIN rail mountable152L x 106W x 71DPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 93.83
1

Elmdene G13805BMU Switch Mode Power Supply Unit 5A

Elmdene G13805BMU Switch Mode Power Supply Unit 5A

Elmdene G13805BMU Switch Mode Power Supply Unit 5AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty5Amp to load 0.5A battery chargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 119.36
1

Elmdene G13805N-C 12V Switch Mode Power Supply Unit 5A C-Box

Elmdene G13805N-C 12V Switch Mode Power Supply Unit 5A C-Box

Elmdene G13805N-C 12V Switch Mode Power Supply Unit 5A C-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 5Amp to load 0.5A battery charging.Efficient Switch Mode operation.LED status indication.Fit up to 17Ah battery.C Box 275h x 330w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 108.01
1

Elmdene G13805N-B 12V Switch Mode Power Supply Unit 5A B-Box

Elmdene G13805N-B 12V Switch Mode Power Supply Unit 5A B-Box

Elmdene G13805N-B 12V Switch Mode Power Supply Unit 5A B-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 5Amp to load 0.5A battery charging.Efficient Switch Mode operation.LED status indication.Fit up to 17Ah battery.B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 111.43
1

Elmdene G13804N-B 12V Switch Mode Power Supply Unit 4A B-Box

Elmdene G13804N-B 12V Switch Mode Power Supply Unit 4A B-Box

Elmdene G13804N-B 12V Switch Mode Power Supply Unit 4A B-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 4Amp to load 0.5A battery charging.Efficient Switch Mode operation.LED status indication.Fit up to 17Ah battery.B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 91.22
1

Elmdene G13805BM-B Switch Mode Power Supply Unit 5A

Elmdene G13805BM-B Switch Mode Power Supply Unit 5A

Elmdene G13805BM-B Switch Mode Power Supply Unit 5AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty5Amp to load0.5A battery charging8 Fused OutputsEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationFit up to 17Ah batteryC Box 275h x 330w x 80d with hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 134.52
1

Elmdene G2405BM-C 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery Charging

Elmdene G2405BM-C 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery Charging

Elmdene G2405BM-C 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features0.5A Battery Charging5Amp To Load24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationFit up to 2x7Ah batteryC Box 275h x 330w x 80dHinge lid27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 168.23
1

Elmdene G2402BMU 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery Charging

Elmdene G2402BMU 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery Charging

Elmdene G2402BMU 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features2Amp To Load 0.5A Battery Charging24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationUn-Boxed27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only. TheG2402BMU comes unboxed.

GBP 98.62
1

Elmdene G13804BM-B Switch Mode Power Supply Unit 4A

Elmdene G13804BM-B Switch Mode Power Supply Unit 4A

Elmdene G13804BM-B Switch Mode Power Supply Unit 4AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty4Amp to load 0.5A battery chargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationFit up to 17Ah battery.B Box 330h x 355w x 80d with clam lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 103.99
1

Elmdene G13804BM-C 12V Switch Mode Power Supply Unit 4A

Elmdene G13804BM-C 12V Switch Mode Power Supply Unit 4A

Elmdene G13804BM-C 12V Switch Mode Power Supply Unit 4AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty4Amp to load 0.5A battery chargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationFit up to 17Ah batteryC Box 275h x 330w x 80d with hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 101.52
1

Elmdene G2403BMU 24V Switch Mode PSU 27.6V 3Amp To Load 0.5A Battery Charging

Elmdene G2403BMU 24V Switch Mode PSU 27.6V 3Amp To Load 0.5A Battery Charging

Elmdene G2403BMU 24V Switch Mode PSU 27.6V 3Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features0.5A Battery Charging3Amp To Load24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationUn-Boxed27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only. TheG2403BMU comes un-boxed.

GBP 118.99
1

Elmdene G2402BM-C 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery Charging

Elmdene G2402BM-C 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery Charging

Elmdene G2402BM-C 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features24V Switch Mode PSU 27.6V2Amp To Load 0.5A Battery ChargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationFit up to 2x7Ah batteryC Box 275h x 330w x 80dHinge lid27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 118.36
1

Elmdene G13804BM-4-B Switch Mode PSU 13.8V

Elmdene G13804BM-4-B Switch Mode PSU 13.8V

Elmdene G13804BM-4-B Switch Mode PSU 13.8V12V Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging. Efficient Switch Mode operation. Mains and Battery monitoring with independent volt free fault outputs. Deep discarge protection. Multi LED status indication. Fit up to 17Ah battery. UnboxedThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 130.86
1

Elmdene G2403BM-C 24V Switch Mode PSU 27.6V 3Amp To Load 0.5A Battery Charging

Elmdene G2403BM-C 24V Switch Mode PSU 27.6V 3Amp To Load 0.5A Battery Charging

Elmdene G2403BM-C 24V Switch Mode PSU 27.6V 3Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features0.5A Battery Charging3Amp To Load24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationFit up to 2x7Ah batteryC Box 275h x 330w x 80dHinge lid27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 142.81
1

Elmdene G2401BM-C 24V Switch Mode PSU 27.6V 1Amp To Load 0.5A Battery Charging

Elmdene G2401BM-C 24V Switch Mode PSU 27.6V 1Amp To Load 0.5A Battery Charging

Elmdene G2401BM-C 24V Switch Mode PSU 27.6V 1Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features1Amp To Load 0.5A Battery Charging24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationFit up to 2x7Ah batteryC Box 275h x 330w x 80dHinge lid27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 89.21
1

Elmdene G13805BM-C Switch Mode Power Supply Unit 5A

Elmdene G13805BM-C Switch Mode Power Supply Unit 5A

Elmdene G13805BM-C Switch Mode Power Supply Unit 5AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty5Amp to load 0.5A battery chargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationFit up to 17Ah batteryC Box 275h x 330w x 80d with hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 132.53
1

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU

Elmdene G1224-42N-C 12V Switchable 4Amp 24V dc 2Amp 27.6V SMPSU The new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 4Amp 24V dc 2Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 92.04
1

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module Only

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module Only

Elmdene G1224-63NU 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU Module OnlyThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUUnboxed Module Only157Lx143Wx55H mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 97.57
1

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-Enclosure

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-Enclosure

Elmdene G1224-63N-C 12V Switchable 6Amp 24V dc 3Amp 27.6V SMPSU C-EnclosureThe new switchable 12V dc 24V dc switch mode range of power supplies has been designed for access control CCTV and general purpose applications that require the use of a standby battery. All models possess a mains fail relay output and an independent ancillary relay that can be used for applications such as a Fire door release relay. There are two enclosures available to house either 12V 7Ah or 17Ah batteries. The products use energy efficient switch mode technology and therefore have a universal mains supply input 90264V ac. On installation the units can be setup to provide either 13.8V or 27.6V dc by a simple PCB selection switch. They are available in three power variants with multi-fused output models if required.Three power variants available are13.8V dc 8A 27.6V dc 4A13.8V dc 6A 27.6V dc 3A13.8V dc 4A 27.6V dc 2AAll with full rated current to load and featuring a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Key FeaturesSwitchable 13.8V 27.6V dc outputCost effective switch mode technologyHigh energy efficiency - reducing energy billsMains Fail relay outputIndependent ancillary relayModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusLoad output or PSU fuse failOutput short circuit or low voltageBattery low or missingScreen printing availableBespoke models available on request3 year warrantySwitchable 12V dc 13.8V 6Amp 24V dc 3Amp 27.6V SMPSUC-Enclosure 275Hx330Wx80DFits upto 2 x 12V 7Ah batteryPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 126.43
1

Elmdene G13803BM-B 12V Switch Mode Power Supply Unit 3A

Elmdene G13803BM-B 12V Switch Mode Power Supply Unit 3A

Elmdene G13803BM-B 12V Switch Mode Power Supply Unit 3AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features 13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Mains and Battery monitoring with independent volt free fault outputs.Multi LED status indication.Fit up to 17Ah battery. B Box 330h x 355w x 80d - Clam lid.Please note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 97.70
1

Elmdene G13805BM-8-C Switch Mode Power Supply Unit 5A

Elmdene G13805BM-8-C Switch Mode Power Supply Unit 5A

Elmdene G13805BM-8-C Switch Mode Power Supply Unit 5AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty5Amp to load 0.5A battery charging8 Fused OutputsEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationFit up to 17Ah batteryC Box 275h x 330w x 80d with hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 156.08
1