158 results (0,15213 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Elmdene ACCESS-EXP-PLATE Expander Plate for MULTI-ACCESS-PSU2

Elmdene ACCESS-EXP-PLATE Expander Plate for MULTI-ACCESS-PSU2

Elmdene ACCESS-EXP-PLATE Expander Plate for MULTI-ACCESS-PSU2This range has been specifically designed to house most common access control door controllers. With different power options and enclosure sizes the range offers the installer a PSU for a variety of applications.All models off er fault signalling and can charge a 12V standby battery to provide backup power on a mains failure.Multi-fused outputs are provided to allow the installer to protect individual circuits as required.All models possess a mains fail relay output while the ACCESS-PSUx models also off er additional Battery Monitoring and Deep Discharge Protection.The MULTI-ACCESS models are provided with a unique hinged cabling system and can provide either 12V or 24V whilst also offering an independent ancillary relay that can be used for applications such as a Fire door release relay.Key FeaturesPCB standoff s supplied for common AC boardsUnique enclosure design MULTI-ACCESS-xCost eff ective switch mode technologyFront rear enclosure tampersMains Fail relay outputBattery Monitoring 2A 4A versionsVolt-free fault outputs 2A 4A versionsIndependent ancillary relay 8A versionsSwitchable 13.8V 27.6V dc output 8A versionFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED Fault indicationScreen printing and bespoke models available on request3 year warranty

GBP 45.48
1

Elmdene LPS-ENC-T Li-Power Enclosure with Tamper

Elmdene LPS-ENC-T Li-Power Enclosure with Tamper

Elmdene LPS-ENC-T Li-Power Enclosure with TamperLi-Power power supplies have been designed to house andpower common alarm signalling communicators whilst accommodating and chargingin-built Lithium battery packs. Offered in a low-profile sleek enclosure itprovides a compact and flexible solution for intruder installations at bothGrade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesExtended life span up to 3 times more than a standard lead acidbattery50 reduction in wall footprint requiredUp to 5 times greater power cycling performanceIncorporates additional battery safety features

GBP 41.66
1

Elmdene LPS-12-G3 Li-Power PSU with 18Ah Battery

Elmdene LPS-12-G3 Li-Power PSU with 18Ah Battery

Elmdene LPS-12-G3 Li-Power PSU with 18Ah BatteryLi-Power power supplies have been designed to house and power common alarm signalling communicators whilst accommodating and charging in-built Lithium battery packs. Offered in a low-profile sleek enclosure it provides a compact and flexible solution for intruder installations at both Grade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesIdeal for housing common communication alarm signalling devicesProvides 150mA to loadMains fail signalling EPSGeneral PSU fault signalling GENFront and rear tamper protectionSleek compact plastic enclosure12Vdc outputCompliant with EN50131-6 Grade 330 hour battery backupL266 x W195 x D60 mm 1.0kg

GBP 144.42
1

Elmdene LPS-12-G2 Li-Power PSU with 9Ah Battery

Elmdene LPS-12-G2 Li-Power PSU with 9Ah Battery

Elmdene LPS-12-G2 Li-Power PSU with 9Ah BatteryLi-Power power supplies have been designed to house and power common alarm signalling communicators whilst accommodating and charging in-built Lithium battery packs. Offered in a low-profile sleek enclosure it provides a compact and flexible solution for intruder installations at both Grade 2 and Grade 3 requirements EN50131-62017 and PD6662.Key FeaturesIdeal for housing common communication alarm signalling devicesProvides 150mA to loadMains fail signalling EPSGeneral PSU fault signalling GENFront and rear tamper protectionSleek compact plastic enclosure12Vdc outputCompliant with EN50131-6 Grade 212 hour battery backupL266 x W195 x D60 mm1.0kg

GBP 111.10
1

Elmdene TR2 24Vdc 2A Door Retainer Power Supply Unit

Elmdene TR2 24Vdc 2A Door Retainer Power Supply Unit

Elmdene TR2 24Vdc 2A Door Retainer Power Supply UnitThe enhanced Elmdene TR range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TR power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The units now have an expanded range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail-safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as followsRemoval of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure.Key FeaturesRemote control of outputChoice of control optionsLED indicationMains transient protectionFail safe operation3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 72.35
1

Elmdene TR4 24Vdc 4A Door Retainer Power Supply Unit

Elmdene TR4 24Vdc 4A Door Retainer Power Supply Unit

Elmdene TR4 24Vdc 4A Door Retainer Power Supply UnitThe enhanced Elmdene TR range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TR power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The units now have an expanded range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as followsRemoval of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure.Key FeaturesRemote control of outputChoice of control optionsLED indicationMains transient protectionFail safe operation3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 85.75
1

Elmdene G13805BMU Switch Mode Power Supply Unit 5A

Elmdene G13805BMU Switch Mode Power Supply Unit 5A

Elmdene G13805BMU Switch Mode Power Supply Unit 5AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty5Amp to load 0.5A battery chargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 119.36
1

Elmdene GEN3-18-C 12Vdc Switch Mode Power Supply 1.5A

Elmdene GEN3-18-C 12Vdc Switch Mode Power Supply 1.5A

Elmdene GEN3-18-C 12Vdc Switch Mode Power Supply 1.5AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.Key Features13.8V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protectionElectronic overload protectionHigh security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warranty additional current for battery charging.Grade 3 Intruder systems.Mains Battery and PSU volt free fault outputs.Diagnostic LEDs.Lid rear tamper.Low quiescent battery standby current.Fit up to 17Ah battery. C Box 275h x 330w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 82.01
1

Elmdene GEN3-08-B Switch Mode Power Supply Unit 1A

Elmdene GEN3-08-B Switch Mode Power Supply Unit 1A

Elmdene GEN3-08-B Switch Mode Power Supply Unit 1AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.Key Features13.8V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protectionElectronic overload protectionHigh security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warranty additional current for battery charging.Grade 3 Intruder systems will accommodate Communication Devices.Mains Battery and PSU volt free fault outputs.Diagnostic LEDs. Lid rear tamper.Low quiescent battery standby current.Fit up to 7Ah battery. B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 76.60
1

Elmdene GEN2-18-C Switch Mode Power Supply Unit 1.5A

Elmdene GEN2-18-C Switch Mode Power Supply Unit 1.5A

Elmdene GEN2-18-C Switch Mode Power Supply Unit 1.5AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.Key Features13.8V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protection Electronic overload protection High security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warranty additional current for battery charging.Grade 2 Intruder systems.Mains Battery and PSU volt free fault outputs.Diagnostic LEDs.Lid tamper.Low quiescent battery standby current.Fit up to 17Ah battery. C Box 275h x 330w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 69.14
1

Elmdene GEN3-08-A Switch Mode Power Supply Unit 1A

Elmdene GEN3-08-A Switch Mode Power Supply Unit 1A

Elmdene GEN3-08-A Switch Mode Power Supply Unit 1AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.Key Features13.8V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protection Electronic overload protection High security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warranty additional current for battery charging.Grade 3 Intruder systems.Mains Battery and PSU volt free fault outputs.Diagnostic LEDs.Lid rear tamper.Low quiescent battery standby current.Fit up to 7Ah battery. A Box 200h x 230w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 73.75
1

Elmdene G13805BM-B Switch Mode Power Supply Unit 5A

Elmdene G13805BM-B Switch Mode Power Supply Unit 5A

Elmdene G13805BM-B Switch Mode Power Supply Unit 5AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty5Amp to load0.5A battery charging8 Fused OutputsEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationFit up to 17Ah batteryC Box 275h x 330w x 80d with hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 134.52
1

Elmdene G13804BM-B Switch Mode Power Supply Unit 4A

Elmdene G13804BM-B Switch Mode Power Supply Unit 4A

Elmdene G13804BM-B Switch Mode Power Supply Unit 4AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty4Amp to load 0.5A battery chargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationFit up to 17Ah battery.B Box 330h x 355w x 80d with clam lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 103.99
1

Elmdene G13805BM-C Switch Mode Power Supply Unit 5A

Elmdene G13805BM-C Switch Mode Power Supply Unit 5A

Elmdene G13805BM-C Switch Mode Power Supply Unit 5AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty5Amp to load 0.5A battery chargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationFit up to 17Ah batteryC Box 275h x 330w x 80d with hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 132.53
1

Elmdene G13803BMU 12V Switch Mode Power Supply Unit 4A

Elmdene G13803BMU 12V Switch Mode Power Supply Unit 4A

Elmdene G13803BMU 12V Switch Mode Power Supply Unit 4AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty12V Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Mains and Battery monitoring with independent volt free fault outputs.Deep discarge protection.Multi LED status indication. Fit up to 17Ah battery. UnboxedPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 80.29
1

Elmdene G13802BM-A 12V Switch Mode Power Supply Unit 2A

Elmdene G13802BM-A 12V Switch Mode Power Supply Unit 2A

Elmdene G13802BM-A 12V Switch Mode Power Supply Unit 2AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features 13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty12V 13.8V dc 2A SMPSU with battery MonitoringMetal Box 230Wx200Hx80D mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 73.57
1

Elmdene G13802BMU 12V Switch Mode Power Supply Unit 2A

Elmdene G13802BMU 12V Switch Mode Power Supply Unit 2A

Elmdene G13802BMU 12V Switch Mode Power Supply Unit 2AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features 13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty12V Switch Mode PSU 13.8V 2Amp to load 0.5A battery charging.Efficient Switch Mode operation.Mains and Battery monitoring with independent volt free fault outputs.Deep discarge protection. Multi LED status indication.Fit up to 17Ah battery. C Box 275h x 330w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 56.90
1

Elmdene GEN3-18-B 12Vdc Switch Mode Power Supply Unit 1.5A

Elmdene GEN3-18-B 12Vdc Switch Mode Power Supply Unit 1.5A

Elmdene GEN3-18-B 12Vdc Switch Mode Power Supply Unit 1.5AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.Key Features13.8V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protectionElectronic overload protectionHigh security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warranty additional current for battery charging.Grade 3 Intruder systems.Mains Battery and PSU volt free fault outputs.Diagnostic LEDs.Lid rear tamper.Low quiescent battery standby current.Fit up to 17Ah battery. B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 86.89
1

Elmdene GEN2-08-A 12VDC Switch Mode Power Supply Unit 1A

Elmdene GEN2-08-A 12VDC Switch Mode Power Supply Unit 1A

Elmdene GEN2-08-A 12VDC Switch Mode Power Supply Unit 1AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.Key Features 13.8V dc output1.0A to loadCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protection Electronic overload protection High security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warrantyAdditional current for battery charging.Grade 2 Intruder systemsMains Battery and PSU volt free fault outputs.Diagnostic LEDsLid tamper.Low quiescent battery standby current.A Box 200h x 230w x 80d - Hinge lidFit up to 7Ah battery.Please note The image is for illustrative purposes only. Please contact us for further information.

GBP 59.32
1

Elmdene 24Vdc 1A Low Profile Door Retainer Power Supply Unit - TRS1

Elmdene 24Vdc 1A Low Profile Door Retainer Power Supply Unit - TRS1

Elmdene 24Vdc 1A Low Profile Door Retainer Power Supply Unit -TRS1The new Elmdene TRS range of power supplies has been specifically designed for access control applications that require remote control of the power supply output. A typical example being where a TRS power supply unit is used to power magnetic door retainers utilising a signal from the fire panel in order to switch off the output to the doors in the event of a fire alarm activation.The TRS PSU has a range of input options which includes the detection of a normally closed contact going open and also removal of a 24V dc signal to provide a fully fail safe operation mode BS 7273 Compliant.The three control input options for remote control of the output are as follows Removal of an external 24V dc supply BS 7273 CompliantOpening of a normally closed volt-free contactClosing of a normally open volt-free contactLED status indicators provide quick diagnostics showing the presence of a mains input and output fuse failure. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Key Features Efficient switch mode operationWide input voltage rangeRemote control of outputChoice of control optionsLED indication within enclosureMains transient protectionFail safe operationScreen printing available3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 54.24
1

Elmdene G13804BM-C 12V Switch Mode Power Supply Unit 4A

Elmdene G13804BM-C 12V Switch Mode Power Supply Unit 4A

Elmdene G13804BM-C 12V Switch Mode Power Supply Unit 4AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty4Amp to load 0.5A battery chargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationFit up to 17Ah batteryC Box 275h x 330w x 80d with hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 101.52
1

Elmdene GEN2-18-B 12VDC Switch Mode Power Supply Unit 1.5A

Elmdene GEN2-18-B 12VDC Switch Mode Power Supply Unit 1.5A

Elmdene GEN2-18-B 12VDC Switch Mode Power Supply Unit 1.5AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.The new switch mode GEN range of power supplies has been specifically designed to provide a comprehensive range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under PD66622010 EN50131-62008.Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery.Two LEDs assist with quick and easy installation by showing presence of mains correct battery charging or a fault condition whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing low battery voltage detection and deep discharge protection.PSU protection is built-in as standard including mains transient filtering electronic output overload protection and fuses on the load and battery outputs.Key Features 13.8V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protection Electronic overload protection High security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warranty additional current for battery charging.Grade 2 Intruder systems.Mains Battery and PSU volt free fault outputs.Diagnostic LEDs.Lid tamper.Low quiescent battery standby current.Fit up to 17Ah battery. B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 71.86
1

Elmdene G13802BM-C 12V Switch Mode Power Supply Unit 2A

Elmdene G13802BM-C 12V Switch Mode Power Supply Unit 2A

Elmdene G13802BM-C 12V Switch Mode Power Supply Unit 2AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features 13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty12V Switch Mode PSU 13.8V 2Amp to load 0.5A battery charging.Efficient Switch Mode operation.Mains and Battery monitoring with independent volt free fault outputs.Multi LED status indication.Fit up to 17Ah battery. C Box 275h x 330w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 79.31
1

Elmdene G13810BM-8-C Switch Mode Power Supply Unit 10A

Elmdene G13810BM-8-C Switch Mode Power Supply Unit 10A

Elmdene G13810BM-8-C Switch Mode Power Supply Unit 10AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty10Amp to load0.5A battery charging8 Fused OutputsEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discarge protectionMulti LED status indicationFit up to 2 x 7Ah batteryC Box 275h x 330w x 80d with Hinge lidPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 195.02
1

Elmdene G13803BM-B 12V Switch Mode Power Supply Unit 3A

Elmdene G13803BM-B 12V Switch Mode Power Supply Unit 3A

Elmdene G13803BM-B 12V Switch Mode Power Supply Unit 3AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features 13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Mains and Battery monitoring with independent volt free fault outputs.Multi LED status indication.Fit up to 17Ah battery. B Box 330h x 355w x 80d - Clam lid.Please note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 97.70
1