12 results (0,14820 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable Unboxed

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable Unboxed

Elmdene POE-ULTRAPOD-MOD PoE Ultra-Pod Module DIN Rail Mountable UnboxedThe Elmdene PoE UltraPod is a unique PoE powered device that can charge up to a 12V 17Ah battery whilst continuing to provide a 13.8V dc output of up to 3A.If the PoE power being provided to the input fails the battery seamlessly takes over continuing to provide the 13.8V dc voltage to the device allowing data to continue to flow.Available as a DIN rail mountable module or a boxed unit. It can be used in a variety of PoE applications such as CCTV or Access control.Installer friendly RJ45 connections are provided to off er a simple plug and play solution without the requirement of terminating Cat5 connections.Key FeaturesProvides up to 3A to the device with an additional 0.5A available for battery charging PoE requiredOffers battery back-up on loss of input PoE powerDIN rail or screw mountable moduleBoxed unit has space for 17Ah batteryBoxed unit has fixing points for commonly used access control boardsProvides remote fault monitoring outputsData pass through for IP connections 10100Mbps

GBP 113.45
1

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT400 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT400 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT400 will emit a high intensity sound.The sounder will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 110db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 18.60
1

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT600 sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate 160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 21.85
1

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with Strobe

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with Strobe

Elmdene INT500 EN50131-4 Security Grade 3 Dual Internal Live Sounder with StrobeThe INT500 sounder is used for notification of an alarm condition as generated within an intruder hold-up or other alarm system. In response to commands from the alarm system control panel the INT500 will emit a high intensity sound andor operate a visual flash.It will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT500 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 23.58
1

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT500S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT500S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT500S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 30.64
1

Elmdene GEN2-18-B 12VDC Switch Mode Power Supply Unit 1.5A

Elmdene GEN2-18-B 12VDC Switch Mode Power Supply Unit 1.5A

Elmdene GEN2-18-B 12VDC Switch Mode Power Supply Unit 1.5AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.The new switch mode GEN range of power supplies has been specifically designed to provide a comprehensive range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under PD66622010 EN50131-62008.Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery.Two LEDs assist with quick and easy installation by showing presence of mains correct battery charging or a fault condition whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing low battery voltage detection and deep discharge protection.PSU protection is built-in as standard including mains transient filtering electronic output overload protection and fuses on the load and battery outputs.Key Features 13.8V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protection Electronic overload protection High security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warranty additional current for battery charging.Grade 2 Intruder systems.Mains Battery and PSU volt free fault outputs.Diagnostic LEDs.Lid tamper.Low quiescent battery standby current.Fit up to 17Ah battery. B Box 330h x 355w x 80d - Clam lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 71.86
1

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live Sounder

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live Sounder

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live SounderThe INT400S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT400S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesInternal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 22.49
1

Elmdene GEN2-08-B 12VDC Switch Mode Power Supply Unit 1A

Elmdene GEN2-08-B 12VDC Switch Mode Power Supply Unit 1A

Elmdene GEN2-08-B 12VDC Switch Mode Power Supply Unit 1AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.The new switch mode GEN range of power supplies has been specifically designed to provide a comprehensive range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under PD66622010 EN50131-62008.Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery.Two LEDs assist with quick and easy installation by showing presence of mains correct battery charging or a fault condition whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing low battery voltage detection and deep discharge protection.PSU protection is built-in as standard including mains transient filtering electronic output overload protection and fuses on the load and battery outputs.Key Features 13.8V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protection Electronic overload protection High security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warranty additional current for battery charging.Grade 2 Intruder systems will accommodate Communication Devices.Mains Battery and PSU volt free fault outputs.Diagnostic LEDs.Lid tamper.Low quiescent battery standby current.Fit up to 7Ah battery. B Box 330h x 355w x 80d - Clam lid.Please note The image is for illustrative purposes only. Please contact us for further information.

GBP 62.08
1

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT600S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600S is classified as an internal remote powered sounder and is powered via an external power source.The INT600S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 25.43
1