63 results (0,19068 seconds)

Show all filters

Brand

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Dunlop BTL B51 Dunlop Standard V-Belt 17X1295

Dunlop BTL B51 Dunlop Standard V-Belt 17X1295

The classical wrapped Dunlop V-belt is a temperature and oil resistant universal drive belt that has anti-static properties with good power transmission capabilities. It is suitable for both industrial machinery and agricultural equipment. Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. Features and Benefits Smooth starting and running Wide range of drive speeds, using standard electric motors Low maintenance Highly efficient No need for lubrication Extremely wide horsepower ranges Dampen vibration between driver and driven pulleys Silent operation Long Service Life Easy Installation Reduction in drive dimension Standards Anti-static properties to ISO 1813 Notes Working temperature range -30 C to +80 C Resistance to oil and heat Images for illustrative purposes only Please contact us directly for delivery information

GBP 10.39
1

Dunlop BTL SPA063/3 PILOT BORE 3-GROOVE PULLEY

Dunlop BTL SPA063/3 PILOT BORE 3-GROOVE PULLEY

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7 mm). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 15.99
1

Dunlop BTL SPB1000/8 TAPER BORE 8-GROOVE PULLEY 5050

Dunlop BTL SPB1000/8 TAPER BORE 8-GROOVE PULLEY 5050

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 0.00
1

SPZ2410 Dunlop Standard Wedge Belt

SPZ2410 Dunlop Standard Wedge Belt

WEDGE BELTS are developed for high performance, length stability, antistatic properties and resistance to oil and heat. Particularly suitable for centrifugal pumps, compressors, motor generators, Fan Motors etc. They offer a good balance between price, performance and quality. They represent an affordable solution for transmission systems in all industrial sectors. Features: Antistatic properties to ISO 1813. Easy Installation. Highly Efficient. Low Maintenance. Resistant to Oil and Heat. Silent Operation. Smooth Starting and Running. Working Temperature Range -30C to + 80C. Wedge belts are produced to BS3790, DIN 7753, ISO 1813 standards. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION

GBP 0.00
1

SPA2432 Dunlop Standard Wedge Belt

SPA2432 Dunlop Standard Wedge Belt

WEDGE BELTS are developed for high performance, length stability, antistatic properties and resistance to oil and heat. Particularly suitable for centrifugal pumps, compressors, motor generators, Fan Motors etc. They offer a good balance between price, performance and quality. They represent an affordable solution for transmission systems in all industrial sectors. Features: Antistatic properties to ISO 1813. Easy Installation. Highly Efficient. Low Maintenance. Resistant to Oil and Heat. Silent Operation. Smooth Starting and Running. Working Temperature Range -30C to + 80C. Wedge belts are produced to BS3790, DIN 7753, ISO 1813 standards. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 0.00
1

XPZ730 Dunlop Standard Raw Edge Belt

XPZ730 Dunlop Standard Raw Edge Belt

Moulded Cog or Raw-edge V-belts have higher capacity and efficiency and they use smaller pulleys than traditional envelope (wrapped) belts. These belts have a higher coefficient of friction and are more aggressive, which makes them a very efficient belt for power transmission Unlike conventional fabric-covered V-belts, raw-edge belts have no cover. Thus, the cross-sectional area normally occupied by the cover is used for more load-carrying cord. Cogs on the inner surface of the belt increase air flow to enhance cooler running. They also increase flexibility, allowing the belt to operate with smaller pulleys.

GBP 0.00
1

XPA1900 Dunlop Standard Raw Edge Belt

XPA1900 Dunlop Standard Raw Edge Belt

Raw edge cogged wedge belts are high performance and are designated by letters standing for their cross-section, e.g. SPAX followed by a number e.g. 1600 which specifies the belts pitch length Lp in mm. They enable resistance to repeated flexing, compact drives, reduced weight, cost savings, small pulley diameters and high drive ratios. They are manufactured in the cross-sections SPZX, SPAX, SPBX and SPCX in a range of over 300 lengths and are static conductive to ISO1813. Belt Section XPA (SPAX)

GBP 7.19
1

XPZ1400 Dunlop Standard Raw Edge Belt

XPZ1400 Dunlop Standard Raw Edge Belt

Moulded Cog or Raw-edge V-belts have higher capacity and efficiency and they use smaller pulleys than traditional envelope (wrapped) belts. These belts have a higher coefficient of friction and are more aggressive, which makes them a very efficient belt for power transmission Unlike conventional fabric-covered V-belts, raw-edge belts have no cover. Thus, the cross-sectional area normally occupied by the cover is used for more load-carrying cord. Cogs on the inner surface of the belt increase air flow to enhance cooler running. They also increase flexibility, allowing the belt to operate with smaller pulleys.

GBP 4.99
1