89 results (0,14871 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Dunlop 51-114 (2517) C 5/8" Simplex Sprocket Cast Taper

Dunlop 51-114 (2517) C 5/8" Simplex Sprocket Cast Taper

5/8" Simplex - Taper Bore A full range of sprockets in both Taper Bore and Pilot Bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification. Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket. Boring and keyway service for pilot bore sprockets is available on request. Cast iron sprockets are also available on request.

GBP 249.99
1

Dunlop 81-76 (3020) C 1" Simplex Sprocket Cast Taper Bore

Dunlop 81-76 (3020) C 1" Simplex Sprocket Cast Taper Bore

1" Simplex - Taper Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 339.99
1

Dunlop 61-114 (2525) C 3/4" Simplex Sprocket Cast Taper

Dunlop 61-114 (2525) C 3/4" Simplex Sprocket Cast Taper

3/4" Simplex - Taper Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 339.99
1

Dunlop 83-38 (3535) C 1" Triplex Sprocket Cast Taper Bore

Dunlop 83-38 (3535) C 1" Triplex Sprocket Cast Taper Bore

1" Triplex - Pilot BoreA full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 359.99
1

Dunlop 81-95 (3020) C 1" Simplex Sprocket Cast Taper Bore

Dunlop 81-95 (3020) C 1" Simplex Sprocket Cast Taper Bore

1" Simplex - Taper Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 429.99
1

Dunlop 81-57 (3020) C 1" Simplex Sprocket Cast Taper Bore

Dunlop 81-57 (3020) C 1" Simplex Sprocket Cast Taper Bore

1" Simplex - Taper Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 219.99
1

Dunlop 63-45 (3020) C 3/4" Triplex Sprocket Cast Taper Bore

Dunlop 63-45 (3020) C 3/4" Triplex Sprocket Cast Taper Bore

3/4" Simplex - Taper Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 219.99
1

Dunlop 61-95 (2517) C 3/4" Simplex Sprocket Cast Taper Bore

Dunlop 61-95 (2517) C 3/4" Simplex Sprocket Cast Taper Bore

3/4" Simplex - Taper Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 239.99
1

Dunlop 63-76 (3020) C 3/4" Triplex Sprocket Cast Taper Bore

Dunlop 63-76 (3020) C 3/4" Triplex Sprocket Cast Taper Bore

3/4" Simplex - Taper Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 399.99
1

Dunlop 51-95 (2517) C 5/8" Simplex Sprocket Cast Taper Bore

Dunlop 51-95 (2517) C 5/8" Simplex Sprocket Cast Taper Bore

5/8" Simplex - Taper Bore A full range of sprockets in both Taper Bore and Pilot Bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification. Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket. Boring and keyway service for pilot bore sprockets is available on request. Cast iron sprockets are also available on request.

GBP 199.99
1

Dunlop 63-57 (3020) C 3/4" Triplex Sprocket Cast Taper Bore

Dunlop 63-57 (3020) C 3/4" Triplex Sprocket Cast Taper Bore

3/4" Simplex - Taper Bore A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles. We also carry a complete range of taper bore bushes and keyway steels to suit. All sprockets are manufactured to exacting standards and specification Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket Boring and keyway service for pilot bore sprockets is available on request Cast iron and stainless steel sprockets are also available Double pilot type also available

GBP 299.99
1

Dunlop SPB250/6 Pilot Bore 6-Groove Pulley

Dunlop SPB250/6 Pilot Bore 6-Groove Pulley

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Pilot Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3 mm). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 179.99
1

Dunlop SPA315/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPA315/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 179.99
1

Dunlop SPB315/10 Taper Bore 10- Groove Pulley 3535

Dunlop SPB315/10 Taper Bore 10- Groove Pulley 3535

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 319.99
1

Dunlop SPC375/4 Taper Bore 4-Groove Pulley 3535

Dunlop SPC375/4 Taper Bore 4-Groove Pulley 3535

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 299.99
1

Dunlop SPA630/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPA630/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 349.99
1

Dunlop SPC400/6 Taper Bore 6-Groove Pulley 3525

Dunlop SPC400/6 Taper Bore 6-Groove Pulley 3525

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 399.99
1

Dunlop SPC280/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPC280/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 279.99
1

Dunlop SPB450/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPB450/5 Taper Bore 5-Groove Pulley 3535

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 299.99
1

Dunlop SPB355/4 Taper Bore 4-Groove Pulley 3525

Dunlop SPB355/4 Taper Bore 4-Groove Pulley 3525

Dunlop SPB V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPB (16.3mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPB) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPB250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 179.99
1

Dunlop SPA400/6 Taper Bore 6-Groove Pulley 3535

Dunlop SPA400/6 Taper Bore 6-Groove Pulley 3535

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 239.99
1

Dunlop SPA450/6 Taper Bore 6-Groove Pulley 3535

Dunlop SPA450/6 Taper Bore 6-Groove Pulley 3535

Dunlop SPA V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPA (12.7mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPA) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPA250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 259.99
1

Dunlop SPC280/8 Taper Bore 8-Groove Pulley 3525

Dunlop SPC280/8 Taper Bore 8-Groove Pulley 3525

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 359.99
1

Dunlop SPC335/4 Taper Bore 4-Groove Pulley 3525

Dunlop SPC335/4 Taper Bore 4-Groove Pulley 3525

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 269.99
1

Dunlop SPC400/4 Taper Bore 4-Groove Pulley 3535

Dunlop SPC400/4 Taper Bore 4-Groove Pulley 3535

Dunlop SPC V-pulleys are manufactured from cast iron EN-GJL-200 UNI EN1561 and are black phosphate according to ISO 4183 and DIN 2211-3 norms. All pulleys are statically balanced for peripheral speeds up to 35 m/sec. Taper Bore V-Pulleys to suit all Wedge belts with cross section SPC (22mm). All Taper Bore V- Pulleys require the corresponding Taper lock bush (Sold Separately). Part numbers are identified by 3 letters (e.g. SPC) which represents the belt cross section, a 3 or 4 digit number (e.g. 250) the pulleys pitch diameter and a 1 or 2 digit number (e.g. 3) the number of grooves/belts to be run in the drive, for example SPC250/3. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 319.99
1