13 results (0,19182 seconds)

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Train Simulator: DB BR 648 Loco Add-On Steam CD Key

Train Simulator - Miami - West Palm Beach Route Add-On Europe Steam CD Key

Train Simulator - Miami - West Palm Beach Route Add-On Europe Steam CD Key

Soak up the sun in the new Miami - West Palm Beach route for Train Simulator and drive the commuter rail line under cloudless blue skies from Mangonia Park to Miami Airport.The 70 mile (114 km) long route runs parallel to the Southeast Florida coast and has 18 stations along its length. A typical station on the route is composed of two side platforms connected by an overpass and two tracks, one for southbound trains and the other for northbound trainsThe most notable station along the stretch of line is West Palm Beach, which opened to passengers in 1925. This station was fully restored in 1991 and is on the National Register of Historic Places, its pastel walls and iconic architecture contrast the heady diesels that roll through.The new Miami Airport Station features prominently alongside Miami Central Station, although it is still to be officially opened. The two stations are a key point on the route, joining rail, metro, bus and airport shuttle services in one huge transport hubUnder an agreement with the Florida Department of Transportation, CSX provides dispatch services, plant maintenance and freight traffic on the route, alongside passenger services operated by Amtrak. The route is relatively high speed too, with a maximum permissible speed of 79mph (127 km/h) for passenger traffic and 60mph (96 km/h) for freight traffic.Also included with the route are the P42DC and the Dash 8-40CW locomotives. The Silver Star passenger service is replicated on the route, which originates in Miami and runs all the way to New York along the Atlantic Coast. Between New York and Washington the train is hauled by either ACS-64, HHP-8 or AEM-7 locomotives; between Washington and Miami, P42s are used. The Silver Star has a distinctive set of coaches so travellers can travel the long distance in comfort.

GBP 0.85
1

Train Simulator: Amtrak Acela Express EMU Add-On Steam CD Key

Train Simulator: Amtrak Acela Express EMU Add-On Steam CD Key

Acela! It is America’s fastest train, and one of its most successful. Operating over Amtrak’s electrified Northeast Corridor between Boston, New York City, Philadelphia, and Washington, D. C., at speeds up to 150 mph, the Acela carries more than 3 million passengers a year.Amtrak’s Acela high-speed trains, built by Bombardier and introduced to service in 2000, are powered by two stylish but burly (to meet U. S. crash standards) electric power cars, each weighing 200,000 pounds, delivering 6,169 horsepower, and equipped with advanced A. C. traction. Between the two power cars, the standard Acela consist is six cars, five coaches (one configured for first class and four as business class) and a mid-train café car. The coaches of the Acela, but not its power cars, are equipped for tilt operations.Now a decade-and-a-half into their service careers, Amtrak’s 20 stylish Acela train sets continue to set the standard for both speed and comfort on the busy Northeast Corridor and typically carry upwards of 15,000 travelers each weekday.Returning to Train Simulator in an enhanced edition including improved operating characteristics and a passenger view, the Acela delivers exciting opportunities for high-speed railroading on two popular Train Simulator routes, the NEC: New York – New Haven route and the recently remastered and re-released Northeast Corridor route between New York City’s Penn Station and Philadelphia’s 30th Street Station.Equipped with authentic cab signaling capabilities and the passenger-car tilt-feature which allows the train to fluently navigate curves along its route, the Acela brings the best of American high-speed railroading to Train Simulator!ScenariosThe Acela includes three career scenarios for the NEC: New York – New Haven route and five career scenarios for the Northeast Corridor: New York – Philadelphia route (available separately):Scenarios for Northeast Corridor: New York – Philadelphia:Business BulletAcela from PhiliAcela ExpressSilver StarAcela from the AppleScenarios for NEC: New York – New Haven:Acela Express to WashingtonExpress to StamfordFirst train to StamfordMore scenarios are available on Steam Workshop online and in-game. Train Simulator’s Steam Workshop scenarios are free and easy to download, adding many more hours of gameplay. With scenarios being added daily, why don’t you check it out now!Key FeaturesComplete Acela consist, including Bombardier 6,169 horsepower power car, first-class and business-class coaches, and café car.Authentic tilt featuresPassenger viewChallenging career scenarios for the NEC: New York-New Haven and Northeast Corridor: New York – Philadelphia routesQuick Drive compatible

GBP 0.32
1

Train Simulator - Munich - Rosenheim Route Add-On Steam CD Key

Train Simulator - Munich - Rosenheim Route Add-On Steam CD Key

The Munich to Rosenheim route through Germany serves as one of the most important cross-border lines to Austria, and this lovelily scenic route is now available for Train Simulator.Built between 1860 and 1871, initially as a single-track route into Austria from Germany, the line was increased to two tracks and formed the main line trunk between Austria and Germany, connecting the German city of Munich to the Austrian cities of Vienna and Salzburg. The line became an important connection between the two countries, which increased its popularity as a key corridor of the Trans-Europ Express and Orient Express.By 1914, there were as many as 50 trains a day traversing the route, although wartime restrictions saw traffic severely limited due to coal shortages and slower military trains. The line soon returned to full traffic capacity, and today is served by many trains to all parts of Germany and Austria.The scenic route sees a mixture of urban landscapes and rural countryside served by Taurus-hauled express trains and regional Taurus 2 and BR 423 multiple units, with Munich serving as the hub for S-Bahn S4 trains to Grafing Bahnhof and main line services to Rosenheim.The 64km (40 mile) section of the Munich to Rosenheim railway for Train Simulator includes a DB BR 423 numerous unit for S-Bahn services and a DB BR 101 with RE passenger stock for main line express services.The route is also completely fitted with German signalling and safety systems, including SIFA, PZB and LZB signalling, and AFB train power control.

GBP 28.76
1

Train Simulator - Pacific Surfliner LA - San Diego Route Steam CD Key

Train Simulator - BR Regional Railways Class 101 DMU Add-On Europe Steam CD Key

Train Simulator - The Riviera Line: Exeter-Paignton Route Add-On Steam CD Key

Train Simulator - The Riviera Line: Exeter-Paignton Route Add-On Steam CD Key

The English Riviera comes to Train Simulator in the beautifully picturesque ‘The Riviera Line: Exeter-Paignton’ route, which runs through some of the most scenic landscape in England.Set in the area of the south west coast of England known as the English Riviera, due to its mild climate and sandy beaches, this picturesque line opened in May 1846, with a single track broad gauge line transporting holidaymakers from the city of Exeter to the Torbay resorts of Devon. By the end of the same year, the line had been extended to Newton Abbot, and two years later to Torquay – the current Torre station. It was not until 1859 that the Dartmouth and Torbay Railway linked the line from Torre to Paignton.The 28 mile (45km) line was originally built to Isambard Kingdom Brunel’s broad gauge structure (2,140mm / 7ft 1/4in), a familiar sight on the Great Western Railway network at the time, and was designed for atmospheric power, although this lasted for less than a year from September 1847 - several pump houses can still be seen along the line, acting as reminders of this ill-fated system. The line was eventually converted to standard gauge in May 1892 and later widened to double tracks over the subsequent years.The non-electrified line is probably best known for its seaside running, rocky coastal scenery and winding tracks, with several miles running along the South Devon sea wall, a picturesque scene during summer months but battered by strong northerly winds and high waves during winter months. Unusually for a UK route, palm trees can also be seen at several stations along the route.On leaving Exeter St Davids Station, built by Brunel and opened on 1 May 1844, the line crosses the River Exe and passes through the suburbs of the City before heading into the Devon countryside. From Powderham Castle, the railway runs alongside the river and heads into Starcross, where the line first runs along the English Channel. Shortly after, Dawlish Warren comes into sight and for the next 1.5 miles (2.4km), the line runs along the famous South Devon Railway sea wall.After Dawlish, the line ducks and dives through a series of tunnels cut into the rocky coves, making for a favourite spot of photographers. From Teignmouth to Hackney, the line runs along the River Teign, before heading inland once again to Newton Abbot. Leaving Newton Abbot, the railway widens out to four tracks; the two for Penzance diverge to the right at Aller Junction while the Riviera Line trains climb and then slowly descend towards the sea at Torquay.Fast passenger services along the line are handled by modern high speed DMUs, including Voyagers and HSTs; stopping services are served by Class 142s, 143s, 150s and 159s. Freight operations are not a major feature of the line but can be seen occasionally.Included with the route is a First Great Western Class 143, recreating the ‘Pacer’ two-car DMU that is a stalwart of the line. Based on a Walter Alexander bus body, the ‘Nodding Donkey’ was introduced to the rail network in the mid-1980s and is well known for its unsophisticated bouncy ride and meagre seating, faithfully recreated in this model. Also included is a Quick Drive compatible High Speed Train (HST) in First Great Western livery.

GBP 10.77
1

Train Simulator: Isle of Wight Route Add-On Steam CD Key

Train Simulator - North Jersey Coast Line Route Add-On Steam CD Key

Train Simulator - North Jersey Coast Line Route Add-On Steam CD Key

The bustling and historic North Jersey Coast Line of NJ TRANSIT® links the New York City metropolitan area with the northern portion of America’s famed “Jersey Shore,” and does so in captivating fashion.Serving two great rail terminals – New York City’s Penn Station in Manhattan and the classic Hoboken Terminal across the Hudson River, the North Jersey Coast Line stretches more than 70 route miles to Bay Head, New Jersey. Trains on the NJTRANSIT North Jersey Coast Line operate over Amtrak’s electrified Northeast Corridor to Rahway, then travel to what was once the famous “New York & Long Branch” along the Atlantic seashore to the iconic New Jersey railroad towns named South Amboy, Long Branch, and Bay Head. NJ Transit is one of North America’s largest and busiest commuter railroads, serving about 300,000 rail commuters and passengers each weekday. ScenariosThe North Jersey Coast Line route add-on includes seven Career Scenarios and four Railfan Mode scenarios:Career ScenariosHobokenNortheast CorridorTo Long Branch: Part 1To Long Branch: Part 2Ocean SprayFrozen to the CoreNew York Night ShiftRailfan Mode ScenariosBelmarHobokenLong BranchNewark International AirportFeatures:Approximately 73 route miles of electrified and non-electrified main lineNew York Penn Station and Hoboken TerminalNJ TRANSIT Meadows Maintenance CenterNJ TRANSIT Bombardier ALP-45DP with power change-over and in-cab signalling featuresNJ TRANSIT Comet IV Coaches and drivable Comet V Cab CarNJ TRANSIT Bombardier MultiLevel Coaches and driveable Cab CarCareer and Railfan Mode scenarios for the routeFast Drive Compatible

GBP 12.77
1

Train Simulator: Thompson Class B1 Loco Add-On Steam CD Key

Train Simulator: Thompson Class B1 Loco Add-On Steam CD Key

The London and North Eastern Railway’s mixed traffic Thompson B1 Class locomotive is now available for Train Simulator, and includes scenarios specially created for the popular Woodhead Line.Designed by Edward Thompson, chief mechanical engineer for the LNER, the prototype for the new 4-6-0 ‘B Class’ (later classified as ‘B1 Class’) was the first two-cylinder main line locomotive built by the LNER. The B1 was designed for medium mixed traffic use but also had the requirement of being cheap to produce due to wartime and post-war economies. The B1s operated across the LNER network and more than 400 were built between 1942 and 1952. However, with the change in British Railways policies the Class was withdrawn in the 1960s, long before the end of its expected economic working life.The Thompson B1 for Train Simulator is available in British Railway black livery with lion-and-wheel emblem. In game features include completely detailed and operational locomotive cab interior, spectacular Pennines scenery and the famous Woodhead Tunnel system.The Woodhead Line Expansion Pack (available separately) is required to play the scenarios included with this add-on.ScenariosFive scenarios for the Woodhead Line (also available on Steam).An Introduction to the Thompson B1Christmas Relief SpecialHello CampersMarylebone ExpressSteam Freight RevivalKey FeaturesThompson B1 steam locomotive in British Railways black livery with lion-and-wheel emblemRealistic cab interior with working gauges and firebox doorsBR (Crimson) Mk1 coachesQuick Drive compatible

GBP 0.33
1

Train Sim World: LIRR M3 EMU Add-On Steam CD Key

Train Sim World: LIRR M3 EMU Add-On Steam CD Key

Take the controls of a “Big Apple” railroading classic with the Long Island Rail Road M3 electric-multiple-unit (EMU) for Train Sim World!During the late 1960s and early 1970s in a major fleet renewal program, New York’s Long Island Rail Road, with funding from the Metropolitan Transportation Authority, purchased 770 M1 EMUs constructed by Budd and General Electric. Christened Metropolitans, the M1s immediately became the workhorses of LIRR electric operations. With its business expanding and its electrified trackage being extended, in 1984-1986, LIRR and MTA returned to Budd to acquire 174 similar M3 EMUs.LIRR’s M3 cars stretch 85-feet in length and are constructed of stainless steel. The cars operate on D. C. current from LIRR’s third-rail system and are powered by four 160-horsepower traction motors riding in General Steel GSI trucks. The versatile EMUs, built in two-car “married pairs,” operate at speeds up to 80 mph (129 km/h) on the LIRR.Dressed in yellow, gray, and silver, the LIRR M3 and M1 EMUs have become railroading classics and while the M1s were retired in 2007, the LIRR M3s soldier on and are expected to remain in serve for a number of years to come.And now you can experience the challenges of operating the memorable LIRR M3 EMUs on Train Sim World’s Long Island Rail Road route!FeaturesLong Island Rail Road M3 2-car EMUAccurate, true-to-life performance and handlingHighly detailed, feature-rich, driving cab with accurate true-to-life performance and handlingAuthentic and detailed sound recordings, recorded from the real locomotivesIncludes three engaging scenarios and an interactive training module for Long Island Rail RoadOperable in Timetable Mode on Long Island Rail RoadPowered by Dovetail Games’ proprietary SimuGraph® vehicle dynamics engine and Unreal Engine 4® technologyDownload size: 96.6mb

GBP 5.99
1

Train Simulator: Liverpool-Manchester Route Add-On Steam CD Key

Train Simulator: Liverpool-Manchester Route Add-On Steam CD Key

Joining two of the north of England’s major cities, the Liverpool to Manchester route for Train Simulator features stunning stations and well known landmarks throughout.The original route between the cities ran between Liverpool Central (High Level) Station and Manchester Central, and was opened in 1873 by the Cheshire Lines Committee. Although both stations have since been demolished and replaced by Liverpool Lime Street and Manchester Piccadilly, it still remains an important route for passenger and freight traffic.The 40 mile route sees up to four passenger trains per hour in each direction with freight still operating on the route. Various light industrial sidings are also a feature, including well known landmarks such as Manchester International Freight Terminal, the River Mersey, Manchester Ship Canal and Liverpool Edge Hill. A total of 24 stations can also be found on the route, including Manchester Oxford Road, Warrington Central, Liverpool South Parkway and Widnes.Included with the route is a Regional Railways Class 158 diesel multiple unit (DMU), built for British Rail between 1989 and 1992. The DMU was built to replace many locomotive-hauled passenger trains and had a top speed of 90mph (145 km/h).ScenariosEight scenarios for the route:Training: Class 158 Expert ControlsTraining: Class 158 Simple ControlsExpress Service to ManchesterExpress to ManchesterMatch Day MadnessOff to WarringtonStorms Gather in MerseysideWaiting for FreightMore scenarios are available on Steam Workshop online and in-game. Train Simulator’s Steam Workshop scenarios are free and easy to download, adding many more hours of exciting gameplay. With scenarios being added daily, why don’t you check it out now!Key Features40 mile route between Liverpool Lime Street and Manchester PiccadillyWell known landmarks such as Manchester International Freight Terminal, the River Mersey, Manchester Ship Canal and Liverpool Edge HillStations including Manchester Oxford Road, Warrington Central, Liverpool South Parkway and WidnesRegional Railways Class 158 DMUBR Railfreight Grey Class 47 diesel locomotive (Quick Drive only)Scenarios for the routeQuick Drive compatibleDownload size: 196mb

GBP 11.12
1

Train Simulator: Salt Lake City Route Extension Add-On Steam CD Key

Train Simulator: Salt Lake City Route Extension Add-On Steam CD Key

Train Simulator’s Soldier Summit route, delivering dramatic and challenging Denver & Rio Grande Western and Amtrak action across the rugged Wasatch Range of the Rocky Mountains, has been a favorite since its release in 2015 – and now a captivating extension to the route, continuing west to Salt Lake City, is available for Train Simulator!The Train Simulator Salt Lake City Extension brings 44 additional mainline miles to the renowned Soldier Summit route, with the new segment extending west from Provo, Utah to Salt Lake City. The expanded route, set in the 1980s, delivers the full experience of Rio Grande’s rugged Sixth Subdivision of the railroad’s Utah Division and, from Helper on the east to Salt Lake City on the west, represents 118 miles of big-time, rugged Western mountain railroading!Along with extended main line operations, the extension to Salt Lake City includes a variety of captivating features and notable locations adding depth and challenges to the D&RGW route. Highlights of the Salt Lake City Extension include: The expansive Geneva Steel Works located adjacent to the D&RGW main line north of Provo at Vineyard, Utah; D&RGW’s sprawling and busy Roper Yard in Salt Lake City; and two large and classic rail passenger stations in Salt Lake City as built by the Union Pacific and Rio Grande.The Salt Lake City Extension features D&RGW’s EMD SD40T-2 and GP9 locomotives and a variety of freight equipment as included with Soldier Summit. And the route also features Amtrak’s EMD F40PH diesel and complete Superliner set perfect to re-create the famed Amtrak California Zephyr!The Salt Lake City Extension is available as a stand-alone purchase for existing owners of the Soldier Summit route, and in an attractive bundled offer to new buyers.As a vital route for D&RGW manifest and coal tonnage, steel-related traffic to and from the great Geneva Works, and the route of the Amtrak California Zephyr, the Salt Lake City Extension, together with the Soldier Summit route, brings you an extraordinary and memorable Train Simulator experience!ScenariosThe Salt Lake City Extension includes seven career scenarios featuring D&RGW freight and Amtrak passenger activities as well as a selection of railfan scenarios.01. Empties to Helper: Part 102. Empties to Helper: Part 203. Provo Empties04. Winter Deliveries05. Roper Yard Switcher06. Westbound Zephyr: Part 107. Westbound Zephyr: Part 2Key FeaturesThe 44-mile D&RGW main line from Provo to Salt Lake City, which together with the Soldier Summit route, provides 118 miles of big-time Western mountain railroading!Route features include the massive Geneva Steel Works and D&RGW’s Roper Yard in Salt Lake CityTwo classic Salt Lake City rail stations built by D&RGW and Union PacificSeven career scenarios featuring freight and passenger operations on the routeQuick Drive compatibleDownload size: 154.2mb

GBP 1.63
1