4.995 results (0,25204 seconds)

Show all filters

Brand

Colour

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Dormer A321 6.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 6.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349665 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 6, 5 mm with an overall length of 93 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072110 Product number (SAP) 86044345 Ordering code ANSI A3216.5 Gross weight - grams 17.407 Cutting diameter - millimeter (DC) 6.5 mm Cutting diameter - inch (DC) 0.256 inch Length chip flute - millimeter (LCF) 55 mm Overall length - millimeter (OAL) 93 mm Connection diameter - millimeter (DCON MS) 6.5 mm Length chip flute - inch (LCF) 2.1654 inch

GBP 2.99
1

Dormer A321 6.8mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 6.8mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349666 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 6, 8 mm with an overall length of 97 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072127 Product number (SAP) 86044156 Ordering code ANSI A3216.8 Gross weight - grams 20.157 Cutting diameter - millimeter (DC) 6.8 mm Cutting diameter - inch (DC) 0.268 inch Length chip flute - millimeter (LCF) 59 mm Overall length - millimeter (OAL) 97 mm Connection diameter - millimeter (DCON MS) 6.8 mm Length chip flute - inch (LCF) 2.3228 inch

GBP 3.49
1

Dormer A321 3.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 3.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349650 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 3, 3 mm with an overall length of 67 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607071960 Product number (SAP) 86044331 Ordering code ANSI A3213.3 Gross weight - grams 3.035 Cutting diameter - millimeter (DC) 3.3 mm Cutting diameter - inch (DC) 0.13 inch Length chip flute - millimeter (LCF) 40 mm Overall length - millimeter (OAL) 67 mm Connection diameter - millimeter (DCON MS) 3.3 mm Length chip flute - inch (LCF) 1.5748 inch

GBP 1.29
1

Dormer A321 3.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 3.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349599 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 3 mm with an overall length of 64 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607071953 Product number (SAP) 86044155 Ordering code ANSI A3213.0 Gross weight - grams 2.7 Cutting diameter - millimeter (DC) 3 mm Cutting diameter - inch (DC) 0.118 inch Length chip flute - millimeter (LCF) 37 mm Overall length - millimeter (OAL) 64 mm Connection diameter - millimeter (DCON MS) 3 mm Length chip flute - inch (LCF) 1.4567 inch

GBP 1.29
1

Dormer A321 12.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 12.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349679 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 12 mm with an overall length of 126 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072257 Product number (SAP) 86044357 Ordering code ANSI A32112.0 Gross weight - grams 79.78 Cutting diameter - millimeter (DC) 12 mm Cutting diameter - inch (DC) 0.472 inch Length chip flute - millimeter (LCF) 85 mm Overall length - millimeter (OAL) 126 mm Connection diameter - millimeter (DCON MS) 12 mm Length chip flute - inch (LCF) 3.3465 inch

GBP 11.99
1

Dormer A321 11.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 11.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349678 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 11, 5 mm with an overall length of 120 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072240 Product number (SAP) 86044356 Ordering code ANSI A32111.5 Gross weight - grams 66.945 Cutting diameter - millimeter (DC) 11.5 mm Cutting diameter - inch (DC) 0.453 inch Length chip flute - millimeter (LCF) 79 mm Overall length - millimeter (OAL) 120 mm Connection diameter - millimeter (DCON MS) 11.5 mm Length chip flute - inch (LCF) 3.1102 inch

GBP 41.99
1

Dormer A321 3.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 3.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349652 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 3, 5 mm with an overall length of 67 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607071984 Product number (SAP) 86044333 Ordering code ANSI A3213.5 Gross weight - grams 4.1 Cutting diameter - millimeter (DC) 3.5 mm Cutting diameter - inch (DC) 0.138 inch Length chip flute - millimeter (LCF) 40 mm Overall length - millimeter (OAL) 67 mm Connection diameter - millimeter (DCON MS) 3.5 mm Length chip flute - inch (LCF) 1.5748 inch

GBP 1.44
1

Dormer A321 8.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 8.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349671 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 8, 5 mm with an overall length of 107 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072172 Product number (SAP) 86044349 Ordering code ANSI A3218.5 Gross weight - grams 31.953 Cutting diameter - millimeter (DC) 8.5 mm Cutting diameter - inch (DC) 0.335 inch Length chip flute - millimeter (LCF) 68 mm Overall length - millimeter (OAL) 107 mm Connection diameter - millimeter (DCON MS) 8.5 mm Length chip flute - inch (LCF) 2.6772 inch

GBP 4.49
1

Dormer A321 9.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 9.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349672 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 9 mm with an overall length of 108 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072189 Product number (SAP) 86044350 Ordering code ANSI A3219.0 Gross weight - grams 35.768 Cutting diameter - millimeter (DC) 9 mm Cutting diameter - inch (DC) 0.354 inch Length chip flute - millimeter (LCF) 70 mm Overall length - millimeter (OAL) 108 mm Connection diameter - millimeter (DCON MS) 9 mm Length chip flute - inch (LCF) 2.7559 inch

GBP 4.99
1

Dormer A321 11.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 11.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349677 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 11 mm with an overall length of 117 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072233 Product number (SAP) 86044355 Ordering code ANSI A32111.0 Gross weight - grams 64.08 Cutting diameter - millimeter (DC) 11 mm Cutting diameter - inch (DC) 0.433 inch Length chip flute - millimeter (LCF) 77 mm Overall length - millimeter (OAL) 117 mm Connection diameter - millimeter (DCON MS) 11 mm Length chip flute - inch (LCF) 3.0315 inch

GBP 8.99
1

Dormer A321 8.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 8.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349670 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 8 mm with an overall length of 105 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072165 Product number (SAP) 86044175 Ordering code ANSI A3218.0 Gross weight - grams 29.228 Cutting diameter - millimeter (DC) 8 mm Cutting diameter - inch (DC) 0.315 inch Length chip flute - millimeter (LCF) 67 mm Overall length - millimeter (OAL) 105 mm Connection diameter - millimeter (DCON MS) 8 mm Length chip flute - inch (LCF) 2.6378 inch

GBP 3.59
1

Dormer A321 5.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 5.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349661 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 5, 3 mm with an overall length of 84 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072073 Product number (SAP) 86044341 Ordering code ANSI A3215.3 Gross weight - grams 10.443 Cutting diameter - millimeter (DC) 5.3 mm Cutting diameter - inch (DC) 0.209 inch Length chip flute - millimeter (LCF) 52 mm Overall length - millimeter (OAL) 84 mm Connection diameter - millimeter (DCON MS) 5.3 mm Length chip flute - inch (LCF) 2.0472 inch

GBP 2.09
1

Dormer A321 5.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 5.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349659 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 5 mm with an overall length of 80 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072059 Product number (SAP) 86044174 Ordering code ANSI A3215.0 Gross weight - grams 8.399 Cutting diameter - millimeter (DC) 5 mm Cutting diameter - inch (DC) 0.197 inch Length chip flute - millimeter (LCF) 50 mm Overall length - millimeter (OAL) 80 mm Connection diameter - millimeter (DCON MS) 5 mm Length chip flute - inch (LCF) 1.9685 inch

GBP 1.79
1

Dormer A321 4.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 4.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349656 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 4, 3 mm with an overall length of 74 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072028 Product number (SAP) 86044337 Ordering code ANSI A3214.3 Gross weight - grams 6 Cutting diameter - millimeter (DC) 4.3 mm Cutting diameter - inch (DC) 0.169 inch Length chip flute - millimeter (LCF) 47 mm Overall length - millimeter (OAL) 74 mm Connection diameter - millimeter (DCON MS) 4.3 mm Length chip flute - inch (LCF) 1.8504 inch

GBP 1.79
1

Dormer A321 4.9mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 4.9mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349658 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 4, 9 mm with an overall length of 80 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072042 Product number (SAP) 86044339 Ordering code ANSI A3214.9 Gross weight - grams 8.231 Cutting diameter - millimeter (DC) 4.9 mm Cutting diameter - inch (DC) 0.193 inch Length chip flute - millimeter (LCF) 50 mm Overall length - millimeter (OAL) 80 mm Connection diameter - millimeter (DCON MS) 4.9 mm Length chip flute - inch (LCF) 1.9685 inch

GBP 2.09
1

Dormer A321 9.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 9.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349673 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 9, 5 mm with an overall length of 110 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072196 Product number (SAP) 86044351 Ordering code ANSI A3219.5 Gross weight - grams 43.885 Cutting diameter - millimeter (DC) 9.5 mm Cutting diameter - inch (DC) 0.374 inch Length chip flute - millimeter (LCF) 70 mm Overall length - millimeter (OAL) 110 mm Connection diameter - millimeter (DCON MS) 9.5 mm Length chip flute - inch (LCF) 2.7559 inch

GBP 5.29
1

Dormer A321 10.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 10.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349674 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 10 mm with an overall length of 113 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072202 Product number (SAP) 86044352 Ordering code ANSI A32110.0 Gross weight - grams 47.3 Cutting diameter - millimeter (DC) 10 mm Cutting diameter - inch (DC) 0.394 inch Length chip flute - millimeter (LCF) 74 mm Overall length - millimeter (OAL) 113 mm Connection diameter - millimeter (DCON MS) 10 mm Length chip flute - inch (LCF) 2.9134 inch

GBP 5.59
1

Dormer A321 4.1mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 4.1mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349654 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 4, 1 mm with an overall length of 74 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072004 Product number (SAP) 86044335 Ordering code ANSI A3214.1 Gross weight - grams 5.041 Cutting diameter - millimeter (DC) 4.1 mm Cutting diameter - inch (DC) 0.161 inch Length chip flute - millimeter (LCF) 47 mm Overall length - millimeter (OAL) 74 mm Connection diameter - millimeter (DCON MS) 4.1 mm Length chip flute - inch (LCF) 1.8504 inch

GBP 1.99
1

Dormer A321 7.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 7.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349667 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 7 mm with an overall length of 97 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072134 Product number (SAP) 86044346 Ordering code ANSI A3217.0 Gross weight - grams 22.373 Cutting diameter - millimeter (DC) 7 mm Cutting diameter - inch (DC) 0.276 inch Length chip flute - millimeter (LCF) 59 mm Overall length - millimeter (OAL) 97 mm Connection diameter - millimeter (DCON MS) 7 mm Length chip flute - inch (LCF) 2.3228 inch

GBP 3.59
1

Dormer A321 5.1mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 5.1mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349660 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 5, 1 mm with an overall length of 80 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072066 Product number (SAP) 86044340 Ordering code ANSI A3215.1 Gross weight - grams 10 Cutting diameter - millimeter (DC) 5.1 mm Cutting diameter - inch (DC) 0.201 inch Length chip flute - millimeter (LCF) 50 mm Overall length - millimeter (OAL) 80 mm Connection diameter - millimeter (DCON MS) 5.1 mm Length chip flute - inch (LCF) 1.9685 inch

GBP 2.09
1

Dormer A321 13.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 13.0mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349681 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 13 mm with an overall length of 130 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072271 Product number (SAP) 86044359 Ordering code ANSI A32113.0 Gross weight - grams 92.13 Cutting diameter - millimeter (DC) 13 mm Cutting diameter - inch (DC) 0.512 inch Length chip flute - millimeter (LCF) 88 mm Overall length - millimeter (OAL) 130 mm Connection diameter - millimeter (DCON MS) 13 mm Length chip flute - inch (LCF) 3.4646 inch

GBP 11.49
1

Dormer A321 3.4mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 3.4mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349651 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 3, 4 mm with an overall length of 67 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607071977 Product number (SAP) 86044332 Ordering code ANSI A3213.4 Gross weight - grams 3.127 Cutting diameter - millimeter (DC) 3.4 mm Cutting diameter - inch (DC) 0.134 inch Length chip flute - millimeter (LCF) 40 mm Overall length - millimeter (OAL) 67 mm Connection diameter - millimeter (DCON MS) 3.4 mm Length chip flute - inch (LCF) 1.5748 inch

GBP 1.43
1

Dormer A321 10.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 10.3mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349675 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 10, 3 mm with an overall length of 113 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072219 Product number (SAP) 86044353 Ordering code ANSI A32110.3 Gross weight - grams 51.906 Cutting diameter - millimeter (DC) 10.3 mm Cutting diameter - inch (DC) 0.406 inch Length chip flute - millimeter (LCF) 74 mm Overall length - millimeter (OAL) 113 mm Connection diameter - millimeter (DCON MS) 10.3 mm Length chip flute - inch (LCF) 2.9134 inch

GBP 7.59
1

Dormer A321 12.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

Dormer A321 12.5mm HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish

HSS Intermediate Length Drill, Steam and Bronze Tempered Surface Finish Material ID: 8349680 Heavy duty design drill with three-flat shanks for medium depth holes. Diameter 12, 5 mm with an overall length of 130 mm. Primarily suited for hand-held operations and pillar drill machines. Three flats on the shank allow for non-slip chucking. The self centering 135 split point reduces thrust force and the steam and bronze tempered surface finish improves lubricity. Suitable for drilling primarily in wide range of thin walled materials. Three-Flats design on shank prevents slipping in power tools keyless chuck Reliable and safe solution for any hand held operation Precisely ground with 135 point and a sharp split point geometry Easy drilling, self-centering capability and reduced thrust force Steam and Bronze temepered surface finish for better lubrication Improved durability throughout the whole life span Shorter intermediate length with strong web design Superior rigidity even in unfavourable conditions Description EAN number 3603607072264 Product number (SAP) 86044358 Ordering code ANSI A32112.5 Gross weight - grams 81.097 Cutting diameter - millimeter (DC) 12.5 mm Cutting diameter - inch (DC) 0.492 inch Length chip flute - millimeter (LCF) 88 mm Overall length - millimeter (OAL) 130 mm Connection diameter - millimeter (DCON MS) 12.5 mm Length chip flute - inch (LCF) 3.4646 inch

GBP 12.99
1