41 results (0,60741 seconds)

Show all filters

Brand

Colour

Gender

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW+GW

3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Cobra's 3DP Tour Irons redefine the boundaries of iron design through advanced 3D printing. Made entirely from 316 stainless steel using precision 3D printed construction, this tour-level set provides a groundbreaking blend of soft feel, blade-style looks, and unmatched forgiveness - all in one compact package. 3D PRINTED PERFORMANCE Unlike traditional forged or cast irons, each head in the 3DP Tour set is built layer-by-layer using 3D printing. This allows Cobra engineers to fine-tune weight placement for ultimate precision and consistency, resulting in a modern blade that delivers reliable performance for confident ball striking. PLAYERS SHAPE WITH GAME IMPROVEMENT BENEFITS While the profile is sleek and compact for the better player, internal innovations give the 3DP Tour irons the stability and launch associated with more forgiving irons. Expect higher MOI, lower CG, and better launch windows - all without compromising the premium feel and control of a blade. INTERNAL LATTICE DESIGN Inside each clubhead is a 3D printed lattice structure developed using Cobra's topology optimisation software. This redistributes up to 33% of the total head mass to boost stability and forgiveness, delivering consistent results even on off-centre strikes. ENHANCED FEEL & SOUND The internal structure not only contributes to forgiveness, but it also fine-tunes sound and feel. With refined acoustics and increased internal support, golfers will experience a soft yet solid impact that resonates with quality feedback on every shot. TUNGSTEN-ENHANCED STABILITY With discretionary weight made available by the lattice design, Cobra positions up to 100g of tungsten in the heel and toe. This strategic weighting further increases MOI and optimises launch - giving you the control of a blade with the confidence of a game-improvement iron. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0 degrees 60.00 degrees 3.4 39.25" S, R D2 RH / LH 4 21.5 degrees 60.50 degrees 3.0 38.75" S, R D2 RH / LH 5 24.0 degrees 61.00 degrees 2.7 38.25" S, R D2 RH / LH 6 27.0 degrees 61.50 degrees 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel The 3DP Tour Irons from COBRA Golf mark a breakthrough in iron technology. Constructed entirely using 3D printing with 316 stainless steel, these irons represent a new era of performance. Internal latticing, only possible through 3D printing, enables optimised weight distribution, delivering unmatched forgiveness in a compact players' blade design. 3D PRINTED STEEL CONSTRUCTION Each iron is crafted using advanced 3D printing techniques with 316 stainless steel. This process provides substantial benefits over traditional casting or forging, offering greater design freedom and unlocking new performance advantages. The result is a unique combination of elite precision and consistency across the set. FORGIVING PLAYERS BLADE SHAPE Through innovative design enabled by 3D printing, COBRA has produced a players' blade that looks compact at address while maintaining the performance traits of a game-improvement iron. The club offers higher MOI for stability and a lower CG for an elevated launch, all without compromising the look and feel better players prefer. INTERNAL LATTICE STRUCTURE Utilising advanced topology optimisation software from nTop, COBRA engineers incorporated an internal lattice structure that redistributes 33% of the total head weight. This innovation achieves the highest possible MOI in a small blade profile, delivering greater forgiveness with precise shot-making control. EXTREME FORGIVENESS MEETS SOFT FEEL The 3D printed lattice structure is not only vital for weight distribution--it also plays a crucial role in enhancing the acoustics and feel of each shot. Its stiffness and internal reinforcement provide soft, solid impact feedback that discerning golfers will appreciate. TUNGSTEN WEIGHTING Thanks to the discretionary weight savings from the internal design, COBRA has integrated up to 100 grams of tungsten strategically into the heel and toe. This positioning promotes a low centre of gravity and high MOI--mirroring the performance of a game-improvement iron in a blade form factor. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0° 60.00° 3.4 39.25" S, R D2 RH / LH 4 21.5° 60.50° 3.0 38.75" S, R D2 RH / LH 5 24.0° 61.00° 2.7 38.25" S, R D2 RH / LH 6 27.0° 61.50° 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Left Regular (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel The 3DP Tour Irons from COBRA Golf mark a breakthrough in iron technology. Constructed entirely using 3D printing with 316 stainless steel, these irons represent a new era of performance. Internal latticing, only possible through 3D printing, enables optimised weight distribution, delivering unmatched forgiveness in a compact players' blade design. 3D PRINTED STEEL CONSTRUCTION Each iron is crafted using advanced 3D printing techniques with 316 stainless steel. This process provides substantial benefits over traditional casting or forging, offering greater design freedom and unlocking new performance advantages. The result is a unique combination of elite precision and consistency across the set. FORGIVING PLAYERS BLADE SHAPE Through innovative design enabled by 3D printing, COBRA has produced a players' blade that looks compact at address while maintaining the performance traits of a game-improvement iron. The club offers higher MOI for stability and a lower CG for an elevated launch, all without compromising the look and feel better players prefer. INTERNAL LATTICE STRUCTURE Utilising advanced topology optimisation software from nTop, COBRA engineers incorporated an internal lattice structure that redistributes 33% of the total head weight. This innovation achieves the highest possible MOI in a small blade profile, delivering greater forgiveness with precise shot-making control. EXTREME FORGIVENESS MEETS SOFT FEEL The 3D printed lattice structure is not only vital for weight distribution--it also plays a crucial role in enhancing the acoustics and feel of each shot. Its stiffness and internal reinforcement provide soft, solid impact feedback that discerning golfers will appreciate. TUNGSTEN WEIGHTING Thanks to the discretionary weight savings from the internal design, COBRA has integrated up to 100 grams of tungsten strategically into the heel and toe. This positioning promotes a low centre of gravity and high MOI--mirroring the performance of a game-improvement iron in a blade form factor. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0° 60.00° 3.4 39.25" S, R D2 RH / LH 4 21.5° 60.50° 3.0 38.75" S, R D2 RH / LH 5 24.0° 61.00° 2.7 38.25" S, R D2 RH / LH 6 27.0° 61.50° 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW

Cobra 3DP Tour Irons - Steel The 3DP Tour Irons from COBRA Golf mark a breakthrough in iron technology. Constructed entirely using 3D printing with 316 stainless steel, these irons represent a new era of performance. Internal latticing, only possible through 3D printing, enables optimised weight distribution, delivering unmatched forgiveness in a compact players' blade design. 3D PRINTED STEEL CONSTRUCTION Each iron is crafted using advanced 3D printing techniques with 316 stainless steel. This process provides substantial benefits over traditional casting or forging, offering greater design freedom and unlocking new performance advantages. The result is a unique combination of elite precision and consistency across the set. FORGIVING PLAYERS BLADE SHAPE Through innovative design enabled by 3D printing, COBRA has produced a players' blade that looks compact at address while maintaining the performance traits of a game-improvement iron. The club offers higher MOI for stability and a lower CG for an elevated launch, all without compromising the look and feel better players prefer. INTERNAL LATTICE STRUCTURE Utilising advanced topology optimisation software from nTop, COBRA engineers incorporated an internal lattice structure that redistributes 33% of the total head weight. This innovation achieves the highest possible MOI in a small blade profile, delivering greater forgiveness with precise shot-making control. EXTREME FORGIVENESS MEETS SOFT FEEL The 3D printed lattice structure is not only vital for weight distribution--it also plays a crucial role in enhancing the acoustics and feel of each shot. Its stiffness and internal reinforcement provide soft, solid impact feedback that discerning golfers will appreciate. TUNGSTEN WEIGHTING Thanks to the discretionary weight savings from the internal design, COBRA has integrated up to 100 grams of tungsten strategically into the heel and toe. This positioning promotes a low centre of gravity and high MOI--mirroring the performance of a game-improvement iron in a blade form factor. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0° 60.00° 3.4 39.25" S, R D2 RH / LH 4 21.5° 60.50° 3.0 38.75" S, R D2 RH / LH 5 24.0° 61.00° 2.7 38.25" S, R D2 RH / LH 6 27.0° 61.50° 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel The 3DP Tour Irons from COBRA Golf mark a breakthrough in iron technology. Constructed entirely using 3D printing with 316 stainless steel, these irons represent a new era of performance. Internal latticing, only possible through 3D printing, enables optimised weight distribution, delivering unmatched forgiveness in a compact players' blade design. 3D PRINTED STEEL CONSTRUCTION Each iron is crafted using advanced 3D printing techniques with 316 stainless steel. This process provides substantial benefits over traditional casting or forging, offering greater design freedom and unlocking new performance advantages. The result is a unique combination of elite precision and consistency across the set. FORGIVING PLAYERS BLADE SHAPE Through innovative design enabled by 3D printing, COBRA has produced a players' blade that looks compact at address while maintaining the performance traits of a game-improvement iron. The club offers higher MOI for stability and a lower CG for an elevated launch, all without compromising the look and feel better players prefer. INTERNAL LATTICE STRUCTURE Utilising advanced topology optimisation software from nTop, COBRA engineers incorporated an internal lattice structure that redistributes 33% of the total head weight. This innovation achieves the highest possible MOI in a small blade profile, delivering greater forgiveness with precise shot-making control. EXTREME FORGIVENESS MEETS SOFT FEEL The 3D printed lattice structure is not only vital for weight distribution--it also plays a crucial role in enhancing the acoustics and feel of each shot. Its stiffness and internal reinforcement provide soft, solid impact feedback that discerning golfers will appreciate. TUNGSTEN WEIGHTING Thanks to the discretionary weight savings from the internal design, COBRA has integrated up to 100 grams of tungsten strategically into the heel and toe. This positioning promotes a low centre of gravity and high MOI--mirroring the performance of a game-improvement iron in a blade form factor. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0° 60.00° 3.4 39.25" S, R D2 RH / LH 4 21.5° 60.50° 3.0 38.75" S, R D2 RH / LH 5 24.0° 61.00° 2.7 38.25" S, R D2 RH / LH 6 27.0° 61.50° 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Right Regular (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel The 3DP Tour Irons from COBRA Golf mark a breakthrough in iron technology. Constructed entirely using 3D printing with 316 stainless steel, these irons represent a new era of performance. Internal latticing, only possible through 3D printing, enables optimised weight distribution, delivering unmatched forgiveness in a compact players' blade design. 3D PRINTED STEEL CONSTRUCTION Each iron is crafted using advanced 3D printing techniques with 316 stainless steel. This process provides substantial benefits over traditional casting or forging, offering greater design freedom and unlocking new performance advantages. The result is a unique combination of elite precision and consistency across the set. FORGIVING PLAYERS BLADE SHAPE Through innovative design enabled by 3D printing, COBRA has produced a players' blade that looks compact at address while maintaining the performance traits of a game-improvement iron. The club offers higher MOI for stability and a lower CG for an elevated launch, all without compromising the look and feel better players prefer. INTERNAL LATTICE STRUCTURE Utilising advanced topology optimisation software from nTop, COBRA engineers incorporated an internal lattice structure that redistributes 33% of the total head weight. This innovation achieves the highest possible MOI in a small blade profile, delivering greater forgiveness with precise shot-making control. EXTREME FORGIVENESS MEETS SOFT FEEL The 3D printed lattice structure is not only vital for weight distribution--it also plays a crucial role in enhancing the acoustics and feel of each shot. Its stiffness and internal reinforcement provide soft, solid impact feedback that discerning golfers will appreciate. TUNGSTEN WEIGHTING Thanks to the discretionary weight savings from the internal design, COBRA has integrated up to 100 grams of tungsten strategically into the heel and toe. This positioning promotes a low centre of gravity and high MOI--mirroring the performance of a game-improvement iron in a blade form factor. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0° 60.00° 3.4 39.25" S, R D2 RH / LH 4 21.5° 60.50° 3.0 38.75" S, R D2 RH / LH 5 24.0° 61.00° 2.7 38.25" S, R D2 RH / LH 6 27.0° 61.50° 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Right Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel The 3DP Tour Irons from COBRA Golf mark a breakthrough in iron technology. Constructed entirely using 3D printing with 316 stainless steel, these irons represent a new era of performance. Internal latticing, only possible through 3D printing, enables optimised weight distribution, delivering unmatched forgiveness in a compact players' blade design. 3D PRINTED STEEL CONSTRUCTION Each iron is crafted using advanced 3D printing techniques with 316 stainless steel. This process provides substantial benefits over traditional casting or forging, offering greater design freedom and unlocking new performance advantages. The result is a unique combination of elite precision and consistency across the set. FORGIVING PLAYERS BLADE SHAPE Through innovative design enabled by 3D printing, COBRA has produced a players' blade that looks compact at address while maintaining the performance traits of a game-improvement iron. The club offers higher MOI for stability and a lower CG for an elevated launch, all without compromising the look and feel better players prefer. INTERNAL LATTICE STRUCTURE Utilising advanced topology optimisation software from nTop, COBRA engineers incorporated an internal lattice structure that redistributes 33% of the total head weight. This innovation achieves the highest possible MOI in a small blade profile, delivering greater forgiveness with precise shot-making control. EXTREME FORGIVENESS MEETS SOFT FEEL The 3D printed lattice structure is not only vital for weight distribution--it also plays a crucial role in enhancing the acoustics and feel of each shot. Its stiffness and internal reinforcement provide soft, solid impact feedback that discerning golfers will appreciate. TUNGSTEN WEIGHTING Thanks to the discretionary weight savings from the internal design, COBRA has integrated up to 100 grams of tungsten strategically into the heel and toe. This positioning promotes a low centre of gravity and high MOI--mirroring the performance of a game-improvement iron in a blade form factor. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0° 60.00° 3.4 39.25" S, R D2 RH / LH 4 21.5° 60.50° 3.0 38.75" S, R D2 RH / LH 5 24.0° 61.00° 2.7 38.25" S, R D2 RH / LH 6 27.0° 61.50° 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW

Cobra 3DP Tour Irons - Steel The 3DP Tour Irons from COBRA Golf mark a breakthrough in iron technology. Constructed entirely using 3D printing with 316 stainless steel, these irons represent a new era of performance. Internal latticing, only possible through 3D printing, enables optimised weight distribution, delivering unmatched forgiveness in a compact players' blade design. 3D PRINTED STEEL CONSTRUCTION Each iron is crafted using advanced 3D printing techniques with 316 stainless steel. This process provides substantial benefits over traditional casting or forging, offering greater design freedom and unlocking new performance advantages. The result is a unique combination of elite precision and consistency across the set. FORGIVING PLAYERS BLADE SHAPE Through innovative design enabled by 3D printing, COBRA has produced a players' blade that looks compact at address while maintaining the performance traits of a game-improvement iron. The club offers higher MOI for stability and a lower CG for an elevated launch, all without compromising the look and feel better players prefer. INTERNAL LATTICE STRUCTURE Utilising advanced topology optimisation software from nTop, COBRA engineers incorporated an internal lattice structure that redistributes 33% of the total head weight. This innovation achieves the highest possible MOI in a small blade profile, delivering greater forgiveness with precise shot-making control. EXTREME FORGIVENESS MEETS SOFT FEEL The 3D printed lattice structure is not only vital for weight distribution--it also plays a crucial role in enhancing the acoustics and feel of each shot. Its stiffness and internal reinforcement provide soft, solid impact feedback that discerning golfers will appreciate. TUNGSTEN WEIGHTING Thanks to the discretionary weight savings from the internal design, COBRA has integrated up to 100 grams of tungsten strategically into the heel and toe. This positioning promotes a low centre of gravity and high MOI--mirroring the performance of a game-improvement iron in a blade form factor. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0° 60.00° 3.4 39.25" S, R D2 RH / LH 4 21.5° 60.50° 3.0 38.75" S, R D2 RH / LH 5 24.0° 61.00° 2.7 38.25" S, R D2 RH / LH 6 27.0° 61.50° 2.4 37.75" S, R D2 RH / LH

GBP 1889.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 5-PW+GW

Cobra 3DP Tour Irons - Steel The 3DP Tour Irons from COBRA Golf mark a breakthrough in iron technology. Constructed entirely using 3D printing with 316 stainless steel, these irons represent a new era of performance. Internal latticing, only possible through 3D printing, enables optimised weight distribution, delivering unmatched forgiveness in a compact players' blade design. 3D PRINTED STEEL CONSTRUCTION Each iron is crafted using advanced 3D printing techniques with 316 stainless steel. This process provides substantial benefits over traditional casting or forging, offering greater design freedom and unlocking new performance advantages. The result is a unique combination of elite precision and consistency across the set. FORGIVING PLAYERS BLADE SHAPE Through innovative design enabled by 3D printing, COBRA has produced a players' blade that looks compact at address while maintaining the performance traits of a game-improvement iron. The club offers higher MOI for stability and a lower CG for an elevated launch, all without compromising the look and feel better players prefer. INTERNAL LATTICE STRUCTURE Utilising advanced topology optimisation software from nTop, COBRA engineers incorporated an internal lattice structure that redistributes 33% of the total head weight. This innovation achieves the highest possible MOI in a small blade profile, delivering greater forgiveness with precise shot-making control. EXTREME FORGIVENESS MEETS SOFT FEEL The 3D printed lattice structure is not only vital for weight distribution--it also plays a crucial role in enhancing the acoustics and feel of each shot. Its stiffness and internal reinforcement provide soft, solid impact feedback that discerning golfers will appreciate. TUNGSTEN WEIGHTING Thanks to the discretionary weight savings from the internal design, COBRA has integrated up to 100 grams of tungsten strategically into the heel and toe. This positioning promotes a low centre of gravity and high MOI--mirroring the performance of a game-improvement iron in a blade form factor. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0° 60.00° 3.4 39.25" S, R D2 RH / LH 4 21.5° 60.50° 3.0 38.75" S, R D2 RH / LH 5 24.0° 61.00° 2.7 38.25" S, R D2 RH / LH 6 27.0° 61.50° 2.4 37.75" S, R D2 RH / LH

GBP 2209.00
1

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel Mens Left Stiff (No Standard Shaft) 4-PW+GW

Cobra 3DP Tour Irons - Steel The 3DP Tour Irons from COBRA Golf mark a breakthrough in iron technology. Constructed entirely using 3D printing with 316 stainless steel, these irons represent a new era of performance. Internal latticing, only possible through 3D printing, enables optimised weight distribution, delivering unmatched forgiveness in a compact players' blade design. 3D PRINTED STEEL CONSTRUCTION Each iron is crafted using advanced 3D printing techniques with 316 stainless steel. This process provides substantial benefits over traditional casting or forging, offering greater design freedom and unlocking new performance advantages. The result is a unique combination of elite precision and consistency across the set. FORGIVING PLAYERS BLADE SHAPE Through innovative design enabled by 3D printing, COBRA has produced a players' blade that looks compact at address while maintaining the performance traits of a game-improvement iron. The club offers higher MOI for stability and a lower CG for an elevated launch, all without compromising the look and feel better players prefer. INTERNAL LATTICE STRUCTURE Utilising advanced topology optimisation software from nTop, COBRA engineers incorporated an internal lattice structure that redistributes 33% of the total head weight. This innovation achieves the highest possible MOI in a small blade profile, delivering greater forgiveness with precise shot-making control. EXTREME FORGIVENESS MEETS SOFT FEEL The 3D printed lattice structure is not only vital for weight distribution--it also plays a crucial role in enhancing the acoustics and feel of each shot. Its stiffness and internal reinforcement provide soft, solid impact feedback that discerning golfers will appreciate. TUNGSTEN WEIGHTING Thanks to the discretionary weight savings from the internal design, COBRA has integrated up to 100 grams of tungsten strategically into the heel and toe. This positioning promotes a low centre of gravity and high MOI--mirroring the performance of a game-improvement iron in a blade form factor. Cobra 3DP Tour Irons Specifications Club Loft Lie Angle Offset (mm) Length Steel Flex Swing Weight Dexterity 3 19.0° 60.00° 3.4 39.25" S, R D2 RH / LH 4 21.5° 60.50° 3.0 38.75" S, R D2 RH / LH 5 24.0° 61.00° 2.7 38.25" S, R D2 RH / LH 6 27.0° 61.50° 2.4 37.75" S, R D2 RH / LH

GBP 2519.00
1