715 results (0,14934 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

C-Tec NC807C Conventional Ceiling Pull Cord

C-Tec NC807C Conventional Ceiling Pull Cord

C-Tec NC807C Conventional Ceiling Pull CordThe NC807C Pull Cord is to be used to generate a standard call on an 800 Series Conventional Call System. The device is typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled. Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.Key FeaturesRed confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been madeSurface mountableBase fits 16mm conduit and BESA centres

GBP 21.17
1

C-Tec NCP-12 Ceiling Pull Cord Accessory Pack

C-Tec NCP-12 Ceiling Pull Cord Accessory Pack

C-Tec NCP-12 Ceiling Pull Cord Accessory PackPull cord pack suitable for use with C-TECs Quantec and 800 Series ceiling pull units. Also compatible with many other manufacturers ceiling pull units. Contains 3m of red nylon cord two triangular bangles and a red fixing bullet.Key FeaturesContains 3m of red vinyl encapsulated cord two triangular bangles and a red fixing bulletIdeal for use in hospitals nursing and care homes doctors surgeries clinics and any other area where infection control is imperativeA simple and cost-effective means of updating existing ceiling pulls to comply with the stringent hygiene regulations of many health authorities and inspection bodiesEasy to clean using a clean cloth and mild detergentAlso compatible with many other manufacturers ceiling pull unitsReplacement nylon pull cord packs also available

GBP 3.79
1

C-Tec QT607 Quantec Slave Ceiling Pull Unit

C-Tec QT607 Quantec Slave Ceiling Pull Unit

C-Tec QT607 Quantec Slave Ceiling Pull UnitCan be used to generate a Standard or Ensuite call on aQuantec Addressable Call System. Typically wired as a slave to aQuantec Addressable Call Point or Quantec Accessible Toilet Reset Point. Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm. Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.Key FeaturesSurface mountable.Base fits 16mm conduit and BESA centres.Also available as part of the QT951 Accessible Toilet Expansion Kit.

GBP 21.00
1

C-Tec NCP-13 Wipe Clean Anti-Bacterial Ceiling Pull Cord Pack

C-Tec NCP-13 Wipe Clean Anti-Bacterial Ceiling Pull Cord Pack

C-Tec NCP-13 Wipe Clean Anti-Bacterial Ceiling Pull Cord PackA BS8300 compliant anti-bacterial wipe-clean pull cord pack suitable for use with C-TECs Quantec and 800 Series ceiling pull units. Contains 3m of red vinyl encapsulated cord two triangular bangles and a red fixing bullet.Key FeaturesCord has integral properties that can help prevent the spread of infections such as MRSA e.coli c.diff S Aureus and the NorovirusIdeal for use in hospitals nursing and care homes doctors surgeries clinics and any other area where infection control is imperativeA simple and cost-effective means of updating existing ceiling pulls to comply with the stringent hygiene regulations of many health authorities and inspection bodiesEasy to clean using a clean cloth and mild detergentAlso compatible with many other manufacturers ceiling pull units

GBP 18.97
1

C-Tec QT412RXCA Infrared Radio Transmitter Push for Call Pull for Attack

C-Tec QT412RXCA Infrared Radio Transmitter Push for Call Pull for Attack

C-Tec QT412RXCA Infrared Radio Transmitter Push for Call Pull for AttackAllows staff to remotely trigger Attack and Standard calls via a Quantec infrared call point ceiling receiver or radio receiver. Can also be used on 800 Series call systems to trigger Standard and Emergency calls via an800 Series infrared receiving device.Key Features10m line-of-sight IR transmitting range.Radio coverage dependent on the Quantec receiving device used.Includes a Karabiner clip for attaching to staff uniforms.Calls are triggered by pulling the transmitters retaining clip or activating one ofits two buttons.Can be recharged using a QT4241 single-way or QT42410 ten-way charging unit.Can be programmed to generate different call levels using a QT423 configurator.Transmitters used on Quantec systems can also be programmed to includeaunique User IDname.

GBP 115.03
1

C-Tec QT412RXA Infrared Radio Transmitter Push for Attack Pull for Attack

C-Tec QT412RXA Infrared Radio Transmitter Push for Attack Pull for Attack

C-Tec QT412RXA Infrared Radio Transmitter Push for Attack Pull for AttackAllows staff working in high-risk environments to remotely trigger an Attack call via a Quantec infrared call point ceiling receiver or radio receiver. Can also be used on 800 Series call systems to trigger Standard and Emergency calls via an800 Series infrared receiving device.Key Features10m line-of-sight IR transmitting range.Radio coverage dependent on the Quantec receiving device used.Includes a Karabiner clip for attaching to staff uniforms.Calls are triggered by pulling the transmitters retaining clip or activating one ofits two buttons.Can be recharged using a QT4241 single-way or QT42410 ten-way charging unit.Can be programmed to generate different call levels using a QT423 configurator.Transmitters used on Quantec systems can also be programmed to includeaunique User IDname.

GBP 115.03
1

C-Tec NC804DE Conventional Emergency Call Reset Point with Button Reset

C-Tec NC804DE Conventional Emergency Call Reset Point with Button Reset

C-Tec NC804DE Conventional Emergency Call Reset Point with Button ResetA button-operated callresetpoint capable of generating Emergency calls on an 800 Series Call System. Onboard reset button cancels Emergency calls made from the NC804DE and Standard calls made from other devices wired on the same zone such as ceiling pull units in Ensuite areas. Ideal for use as a reset point for ceiling pull units that will allow a more urgent Emergency call to be made if additional assistance is required.Key FeaturesRed reassurance LED confirms a call has been made.Mounts on a standard UK 25mm single gang flush or surface back box.

GBP 36.24
1

C-Tec QT605S Quantec Accessible Toilet Reset Point with Sounder

C-Tec QT605S Quantec Accessible Toilet Reset Point with Sounder

C-Tec QT605S Quantec Accessible Toilet Reset Point with SounderAn addressable Quantec reset pointcw confidence sounder specifically designed for use in BS8300 compliant accessible toilet alarm applications. Includes a redgreen reassurance LED and RESET button with Braille text for cancelling calls.Can be interfaced to aQuantec ceiling pull installed inside the WC and slave overdoor light cw sounder installed outside the WC. Will generate a Standard call tone when its slave ceiling pull is activated and an intermittent call acknowledgement tonewhenthe call is accepted at a Quantec display to let users know help is on the way. Also available as part of ourQT951 Accessible Toilet Alarm kit.

GBP 40.79
1

C-Tec NC951 Conventional Accessible Toilet Alarm Kit to BS8300

C-Tec NC951 Conventional Accessible Toilet Alarm Kit to BS8300

C-Tec NC951 Conventional Accessible Toilet Alarm Kit to BS8300The Kit includes everything required for BS8300 clause compliant emergency assistance alarm. Attractively designed and easy to install the NC951 allows a distressed person to raise an alarm in the event of an emergency.To operate the user pulls the cord of a ceiling pull cord to activate a light and sounder outside the WC and on the systems call controller. A new Call Accept facility allows staff to send an intermittent call acknowledgement signal to the WC to confirm help is on the way.The NC951 can be wired in to 4 core stranded security cable but can also be used as a single zone emergency assistance alarm in areas such as changing rooms solariums interview rooms reception areas and more.Kit Contains1 x NC943B 12V 140mA Call Controller cw standby battery and relay1 x NC807C Ceiling Pull Cord1 x NC806CS Overdoor Light cw Sounder1 x NC809DBBT Accessible Toilet Reset Point cw Sounder1 x Accessible WC StickerKey FeaturesThe UKs market-leading Disabled Persons Toilet Alarm kit now with a combined ceiling and wall mountable pull cord unitIncludes everything required for a BS8300 compliant emergency assistance alarmEasy to install simple to useAllows a distressed person to raise an alarm in an emergency. To operate the user pulls the cord of the ceilingwall pull to activate a light and sounder outside the WC and on the systems Call ControllerThe systems Call Accept function allows staff to send an intermittent call acknowledgment signal to the WC to confirm help is on the wayIncludes an NC943B 12V 140mA Call Controller cw standby battery relay NC807C CeilingWall Pull NC806CS Overdoor Light cw Sounder NC809DBBT Accessible Toilet Reset Point cw Sounder NC949 Accessible WC StickerCan be wired in 4 core stranded security cableCan also be used as a single zone assistance alarm in changing rooms solariums interview rooms reception areas more

GBP 116.27
1

C-Tec QT951 Quantec Addressable Accessible Toilet Alarm Kit

C-Tec QT951 Quantec Addressable Accessible Toilet Alarm Kit

C-Tec QT951 Quantec Addressable Accessible Toilet Alarm KitA cost-effective expansion kit that adds true BS8300 compliant accessible toilet alarm functionality to a Quantec Addressable Call System. Includes a QT607 ceiling pull unit a QT605S reset point cw confidence sounder a Quantec slave overdoor light cw sounder and an NC949 Accessible Toilet Sticker.Key FeaturesAllows people in distress to call for help quickly and easily.Call acknowledgement function provides audible visual feedback inside the WC that help is on the way see Operation section below.Staff can Accept alarm calls at a Quantec display.Multiple kits can be used on one Quantec system.Includes a free MRSA resistant anti-bacterial pull cord pack for a limited period only.Backwards compatible.Must be used in conjunction with at least one Quantec Controller.Operating1. The distressed person raises an alarm by pulling the cord on the QT607 Ceiling Pull Unit.Inside the WC The red reassurance LED on the QT607 Ceiling Pull Unit and the reassurance LED and sounder on the QT605S Reset Point cw Sounder pulse Quantecs standard call sequence 0.5 seconds on and 0.5 seconds off to reassure the user the call has been registered.Outside the WC The Alarm LEDs and sounder on the QT606S Overdoor Light cw Sounder pulse Quantecs standard call sequence 0.5 seconds on 0.5 seconds off and a message appears on all relevant Quantec displays as programmed to let staff know someone is in need of assistance.2. The member of staff responding to the Alarm call presses the Call Accept button on a Quantec DisplayInside the WC The reassurance LED and sounder on the QT605S Reset Point cw Sounder pulse Quantecs Call Acknowledged sequence 0.5 seconds on 3 seconds off redgreen to let the user know help is on the way.3. Once assistance has been provided the Alarm call is cancelled from inside the WC by pressing the RESET button on the QT605S Reset Point cw SounderInside and outside the WC All relevant indicators display messages and sounders are extinguished and the calling device returns to its normal state.If the RESET button on the QT605S is NOT pressed when in the call acknowledged state after a period of 1 to 8 minutes as programmed it generates another AlarmStandard call on the system.

GBP 110.95
1

C-Tec EP210F Flush Remote Status Unit

C-Tec EP210F Flush Remote Status Unit

C-Tec EP210F Flush Remote Status UnitThe remote status unit is designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel toprovide remote system status indicationviaa 128 x 64 pixel LCD status display.Also includes a pull-down manual release button a mode automanual keyswitch and a wide range of system status indicators.Key FeaturesThree monitored input connections Hold Abort and ModelMax. 8 remote status units per EP203 panelSurfaceremote status unitsEP210S and weather proof enclosures BF3591 also available

GBP 202.14
1

C-Tec EP210S Surface Remote Status Unit

C-Tec EP210S Surface Remote Status Unit

C-Tec EP210S Surface Remote Status UnitThe remote status unit is designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel toprovide remote system status indicationviaa 128 x 64 pixel LCD status display.Also includes a pull-down manual release button a mode automanual keyswitch and a wide range of system status indicators.Key FeaturesThree monitored input connections Hold Abort and Mode.Max. 8 remote status units per EP203 panel.Flush remote status unitsEP210F and weather proof enclosures BF3591 also available.

GBP 209.29
1

C-Tec BF366 Isolatable Relay on a Plate 24v 5A

C-Tec BF366 Isolatable Relay on a Plate 24v 5A

C-Tec BF366 Isolatable Relay on a Plate 24v 5AThe BF366 is a double-pole 24V 5A polarised relay specifically designed for use in 24V fire alarm systems. It includes a key switch isolation facility allowing the relay operation to be temporarily disabled from the fire alarm signal during routine test and maintenance to prevent auto diallers water sprinklers roller shutters etc. from activating.Mountable on a 25mm flush or surface mount back box the relay is trigger able via a control panels open collector output or a standard polarised fire alarm sounder circuit. If connecting to a sounder circuit note that the relay will return to its normal state when the fire condition is cleared or silenced. Check with the approving authority that the proposed arrangement is acceptable prior to installation.Key FeaturesA 24V 5A polarised relay designed for use in 24V fire alarm systemsIncludes a keyswitch isolation facility allowing the relay operation to be temporarily disabled during routine test and maintenance to prevent auto diallers water sprinklers roller shutters etc. from activatingWhen isolated the units Isolated LED will flash and a warning beeper will sound every 8 seconds to ensure devices are not inadvertently left in the isolated stateRelay is triggerable via a control panels open collector output or a standard polarised fire alarm sounder circuit if connecting to a sounder circuit the relay will return to its normal state when the fire condition is cleared or silenced - check with the approving authority that this arrangement is acceptable prior to installationFits on standard UK 25mm flush or surface mount back boxes

GBP 23.32
1

C-Tec EVC301RLK Type A Red Key Lockable Telephone Outstation with Handset

C-Tec EVC301RLK Type A Red Key Lockable Telephone Outstation with Handset

C-Tec EVC301RLK Type A Red Key Lockable Telephone Outstation with HandsetAn attractive Type Afire telephoneoutstation cw telephone-style handset. Supplied in a durable lift key lockablered steel case. Ideal for use infire telephone and stadium marshalling applications. Allows stewards and fire marshalsto communicate with a SigTEL Master Controller and vice versa. Facilitatesreliable two-way communication in a fire emergency between a permanently manned control room and key points ofasite.Key FeaturesTrue duplex speechCan be surface mounted using a T-BEZ302 bezelMeets and exceeds the requirements of BS 5839-9 when correctly installed

GBP 245.40
1

C-Tec SPE0849000 NC802DB cw QT602E Label

C-Tec SPE0849000 NC802DB cw QT602E Label

C-Tec SPE0849000 NC802DB cw QT602E LabelThe SPE0849000 is a NC802DB which comes with a QT602E Label.An attractively designed button-operated callreset point capable of generating Standard calls on an 800 Series Call System.Key FeaturesIncludes a 6.35mm jack plug socket for the connection of an optional tail call lead pressure mat or other ancillary calling deviceRed reassurance LED confirms a call has been madeOnboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone such as ceiling pull units in Ensuite areasMounts on a standard UK 25mm single gang flush or surface back box

GBP 25.38
1

C-Tec NC802DB Conventional Call Point with Button Reset and Remote Socket

C-Tec NC802DB Conventional Call Point with Button Reset and Remote Socket

C-Tec NC802DB Conventional Call Point with Button Reset and Remote SocketAn attractively designed button-operated callreset point capable of generating Standard calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead pressure mat or other ancillary calling device.Key FeaturesRed reassurance LED confirms a call has been made.Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone such as ceiling pull units in en-suite areasMounts on a standard UK 25mm single gang flush or surface back box

GBP 27.18
1

C-Tec BF376 Relay on a Plate 24v 5A Single Gang

C-Tec BF376 Relay on a Plate 24v 5A Single Gang

BF376 Relay on a Plate 24v 5A Single GangThe BF376 is a general purpose double-pole polarised 24V 5A relay designed for use in 24V fire alarm systems. It incorporates a high intensity LED which illuminates red when the relay is active. It may be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets roller shutter doors etc.Please note if connecting to a sounder circuit the relay will return to its normal state when the fire condition is cleared or silenced. Check with the approving authority that the proposed arrangement is acceptable prior to installation. The relay can be mounted on 25mm flush or surface mount back boxes. Mains wiring if used should be provided in accordance with the current edition of the IEE Wiring Regs.16th.Ed.The general requirement for any mains supply to the BF376 is fixed wiring using three core cable not less than 1mm2 fed from an isolating switch fuse spur fused at 5A max. This should be exclusive to the BF376 and its load and be labelled accordingly. As an alternative to a switched fused spur any double pole isolating device with a contact separation of 3mm or greater which is fitted with suitable in-circuit protection devices and meets the appropriate national wiring regulations can be used.Technical InformationActivation current Typically 30mA 24VDCIndicators Red relay activated LEDConnections V -V Supply NC C NO SW1 SW2. Contact rating 24Vdc is 5A resistive 2A inductive Contact rating 240Vac is 5A resistive 2A inductiveProduct dimensions mm 85w x 85h x 27d mm can be mounted onto a standard UK 25mm single gang flush or surface back boxConstruction finish White PVC plate light grey label silver nickel contactsIP Rating IP40Weight 78gOperating temperature -10C to 60CKey FeaturesA general purpose double-pole polarised 24V 5A relay designed for use in 24V fire alarm systemsIncorporates a high intensity LED which illuminates red when the relay is activeCan be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets rollershutter doors etcCan be mounted on 25mm flush or surface mount back boxes

GBP 8.15
1

C-Tec NC802DEB-12 Conventional Emergency Call Point with Button Reset and Remote Socket

C-Tec NC802DEB-12 Conventional Emergency Call Point with Button Reset and Remote Socket

C-Tec NC802DEB-12 Conventional Emergency Call Point with Button Reset and Remote SocketAn attractively designed button-operated callreset point capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead pressure mat or other ancillary calling device.Key FeaturesRed reassurance LED confirms a call has been madeOnboard reset button cancels Standard and Emergency calls made from the NC802DEB-12 and Standard calls made from other devices wired on the same zone such as ceiling pull units in Ensuite areasMounts on a standard UK 25mm single gang flush or surface back box

GBP 43.27
1

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16Designed foruse with our popular SigTEL system the ECU-16 features a new-look high-performance handset to allow operators tocommunicate with up to 16 disabled refuge or firetelephone systems.The controllers powerful networking capabilities also allow up to 14ECU-16 mastercontrollers to be interlinked to create systems of up to224 lines. A separate ECU-224desk control unit can also be connectedtoallow communication with up to 224outstations from a single point.Compatible with C-TECs entire range of Type A Fire Telephone andType B Disabled Refugeoutstations and remote fire telephonehandsets the controller can be easilyinterfaced to NC951 accessibletoilet alarms PDA hearing loop systems strobesCCTV activation relaysand more.Key FeaturesA new 16-line Master Controller for use with our SigTEL disabled refuge fire telephone and stadium marshallingsystem.Allows operators to communicate with up to four disabled refuge or fire telephone outstations.Includes an attractive semi-recessed handset.Improved SigTEL networking capability allow systems of up to 224 lines to be created with optionaladditional desk unit control.Backlit LCD and unique auto-learn facility allows fast system set up.Can be semi-flush mounted using an AFP385 bezel.Operation can be maintained for 24 hours standby and 3 hours in use using 2 x 12V 7 Ahr batteries.Easily interfaced to NC951 accessible toilet alarms PDA range hearingloop systems strobes CCTV activation relays etc.

GBP 1906.25
1