10 results (0,14091 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Baldwin Boxall VIGIL2 End-of-line Monitor Unit BEL1

Baldwin Boxall VIGIL2 End-of-line Monitor Unit BEL1

Baldwin Boxall VIGIL2 End-of-line Monitor Unit BEL1All critical signal paths of a voice alarm system must be fully monitored from the fire officers microphone through the amplifiers to the end of the loudspeaker lines. Also any faults detected with the power supply internal battery charger and backup batteries must be reported and acted upon. A VIGIL2 system has various monitoring options.BEL1 is an active unit which is installed on each loudspeaker circuit. Up to four BEL1 units can be placed on one speaker run. All internal DIL switches must be set correctly.Key FeaturesMonitors the critical signal path of speaker lines for open short circuit and earth faults.Fault warnings are displayed on the voice alarm rack.Each BEL1 unit uses approximately three Watts of power this needs to be noted when designing a system.

GBP 156.04
1

Baldwin Boxall VIGIL2 Weatherproof End-of-line Monitor Unit BEL1IP

Baldwin Boxall VIGIL2 Weatherproof End-of-line Monitor Unit BEL1IP

Baldwin Boxall VIGIL2 Weatherproof End-of-line Monitor Unit BEL1IPAll critical signal paths of a voice alarm system must be fully monitored from the fire officers microphone through the amplifiers to the end of the loudspeaker lines. Also any faults detected with the power supply internal battery charger and backup batteries must be reported and acted upon. A VIGIL2 system has various monitoring options.BEL1IP is an active unit which is installed on each loudspeaker circuit. Up to four BEL1IP units can be placed on one speaker run. All internal DIL switches must be set correctly.Key FeaturesMonitors the critical signal path of speaker lines for open short circuit and earth faults.Fault warnings are displayed on the voice alarm rack.Each BEL1IP unit uses approximately three Watts of power. This needs to be noted when designing a system.IP65 weatherproof rated.

GBP 393.72
1

Baldwin Boxall Double Gang Room Panel for Local Audio Control RPAIV

Baldwin Boxall Double Gang Room Panel for Local Audio Control RPAIV

Baldwin Boxall Double Gang Room Panel for Local Audio Control RPAIVA room panel enables local control of audio facilities useful for hotelconference rooms and many other applications. There are two versions of the VIGIL room panel adding more options to our EVAS voice alarm and public address systems.Key FeaturesConnection to the main EVAS control rack is via CAT5.Optional robust cover available.Brushed stainless steel finish.Provides control of local audio settings volume music source etc.Emergency broadcasts from the EVAS voice alarm system will override the room panel settings.Enables connection of music source andor mic for local broadcast.Microphone connector is a 3-pin XLR6.35 mm jack socket.Two phono sockets and 3.5 mm jack socket.Highlow sensitivity switch for microphone.Protective cover available RPP2.

GBP 289.39
1

Baldwin Boxall 100W Volume Controls with Override Relay BVC100

Baldwin Boxall 100W Volume Controls with Override Relay BVC100

Baldwin Boxall 100W Volume Controls with Override Relay BVC100These volume controls are designed to attenuate the signal fed to loudspeakers driven by the 100-volt line output of a public address amplifier. The volume control is fitted into a double gang surface mounting box and can be used with any number of loudspeakers provided the load does not exceed 100 Watts. The control has 9 steps of 3dB. The knob is fully rotating. A volume restoration relay is fitted and operates in the same way as the BVC6.

GBP 219.54
1

Baldwin Boxall DC Line Monitor BVRDADC

Baldwin Boxall DC Line Monitor BVRDADC

Baldwin Boxall DC Line Monitor BVRDADCThe Vigil BVRDADC is a loudspeaker line monitor and amplifier changeover unit for use with VIGIL amplifiers and the BVRD2M router. Each unit is supplied as a DIN rail-mounting module with screw terminals for connections to the amplifiers and loudspeaker lines. Connection to the BVRD2M is by CAN BUS ports. Each unit consists of ten channels that can be utilised for either dual or single circuit systems.For dual circuits ten working amplifiers five dual circuits and one standby amplifier can be accommodated. For single circuit systems ten working amplifiers ten single circuits and one standby amplifier are available. If an amplifier were to fail the BVRDADC automatically detects the faulty amplifier and switches over to a reserve amplifier until the fault has been rectified. A fault will be displayed on the BVRD2M front panel and also stored in the BVRD2M fault log.When the faulty amplifier has been replaced it is necessary to press the Fault Reset button on the front of the BVRD2M to restore the system and stop using the reserve amplifier. Each loudspeaker line including spurs must have an End of Line resistor fitted in parallel with the last physical loudspeaker on the line. All loudspeakers must be fitted with a DC Blocking capacitor. The BVRDADC monitors the integrity of the Loudspeaker Line by measuring a small DC current flowing through the End of Line resistors. Any change in this current indicates either a short circuit or open circuit condition on the loudspeaker line. Earth faults are also detected.

GBP 1449.71
1

Baldwin Boxall VIGIL Eclipse4 Voice Alarm Public Address System BVECASE4

Baldwin Boxall VIGIL Eclipse4 Voice Alarm Public Address System BVECASE4

Baldwin Boxall VIGIL Eclipse4 Voice Alarm Public Address System BVECASE4The VIGIL Eclipse4 is a stand-alone EN54 certified voice alarmpublic address system. It is a complete fully monitored system which takes up less floor space and is ideal for fitting into building risers or places where space is restricted.VIGIL Eclipse4 is the next generation product in this range. It uses the new VIGIL3 transformerless amplifiers and the new VIGIL3 battery charger with VIGIL2 EVAS routeing technology.What are the benefits of the Eclipse SystemQuite simply the Eclipse is a fully integrated voice alarm system which takes up minimal floor space and is secured by bolting to a wall or other suitable solid upright structure. It is ideal for fitting within building risers and is easily networked to form a comprehensive voice alarm or public-address system.The modular nature of the system provides adaptability and is suitable for many types of building. In addition to its usefulness for high-rise style structures the Eclipse also fits well as a tenant system for landlordtenant voice alarm system solutions.Key FeaturesStand-alone system with an IP30 rated housing complete with integral battery backup For some systems a bolt on battery enclosure is required to house additional batteries.The unit includes a BVRD2M4 DSP-controlled VIGIL2 EVAS router and has space for up to four VIGIL3 amplifiers.Up to six flash stored 57 second messages with independent level surveillance and timing.Ideal for decentralised networking or tenant systems.Battery charger amplifiers batteries and BEL1 end-of-line modules to be ordered separately as required.Up to 126 units can be networked.Requires a direct non-switchable power supply - preferably via a Class D circuit breaker.Space for up to four VIGIL3 amplifiers purchased separatelyDimensions mm 500w x 900h x 200dKit ContainsEclipse4 caseBVRD2M4 DSP controlled routerBVMBC VIGIL3 mains battery chargerWiring loomand four messages evac alert start of test end of test from Baldwin Boxalls standard list.

GBP 4399.92
1

Baldwin Boxall BV3ADIS VIGIL 3 Slave DC Line Monitoring IsolatorChangeover Mod

Baldwin Boxall BV3ADIS VIGIL 3 Slave DC Line Monitoring IsolatorChangeover Mod

Baldwin Boxall BV3ADIS VIGIL 3 Slave DC Line Monitoring IsolatorChangeover ModThe DC line monitor isolator units are CANBUS modules for the VIGIL voice alarm systems with VIGIL3 amplification consisting of two components BV3ADIM and BV3ADIS.Key FeaturesEnables dual loudspeaker circuits to connect to a single amplifierEach BV3ADIS unit provides both AB circuits for two amplifiersUp to 10 spurs per loudspeaker lineThe BV3ADIM master unit connects to a VIGIL3 amplifierUp to five BV3ADIS can be connected to one BV3ADIMFitting five BV3ADIS enables broadcast and monitoring for up to twenty loudspeaker circuitsThe modules plug directly togetherUtilises DC line monitoring techniques therefore BEL1 end of line monitoring is not required. Please refer to system requirements.Failure of either the A or B circuit from one amplifier will not effect the other circuitIn the event of an amplifier failure reserve amplifiers will automatically operateWith five BV3ADIS fitted a one-in-ten amplifier changeover ratio is enabledReduces rack size and cost for large voice alarm systemsEarth leakage detection

GBP 576.98
1

Baldwin Boxall 4-way Disabled Toilet Alarm Control Panel DTA4

Baldwin Boxall 4-way Disabled Toilet Alarm Control Panel DTA4

Baldwin Boxall 4-way Disabled Toilet Alarm Control Panel DTA4Disabled toilet alarms are used as a method for people to call for assistance following a fall or other emergency. They are generally installed in disabled toilet cubicles however they can be used in other places such as bedrooms.Our 4-way controller together with our toilet alarm kits forms a fully compliant to BS8300 easy-to-use disabled toilet alarm solution.The controller has many advantages over similar products on the market today.Key FeaturesIndependent call acceptacknowledge button for each toilet alarm connected.Monitored system with fault LED to indicate if a short or open condition is detected.Independent fault indicators for each line.The panel has a built-in mains supply and is simply installed via a fused spur 3A switched connection to a separate power supply is not required. An LED on the panel confirms that the system is powered and available for use.Up to ten of the panels can be daisy chained for larger systems without the need for any additional power source.A separate relay output enables connection to an external beacon providing the opportunity to add a remote indicator to alert staff in a different area.Full compliance to BS8300 with an acknowledge feature to reassure the caller that help is on the way both audible and visual alarms change at the point of call when acknowledge button is pressed.The system has a programmable alarm re-sound feature. This will operate if a call has been acknowledged at the control unit but is not reset at the point of call within the specified time.Space to independently label each zone for easy identification of the alarm call.Choice of a white or stainless-steel finish as standard.For ease of installation the panel fits into a standard double gang back box not supplied.

GBP 224.08
1

Baldwin Boxall 4 Way Toilet Alarm Control Panel SSteel DTA4S

Baldwin Boxall 4 Way Toilet Alarm Control Panel SSteel DTA4S

Baldwin Boxall 4 Way Toilet Alarm Control Panel SSteel DTA4SDisabled toilet alarms are used as a method for people to call for assistance following a fall or other emergency. They are generally installed in disabled toilet cubicles however they can be used in other places such as bedrooms.Our 4-way controller together with our toilet alarm kits forms a fully compliant to BS8300 easy-to-use disabled toilet alarm solution.The controller has many advantages over similar products on the market today.Key FeaturesIndependent call acceptacknowledge button for each toilet alarm connected.Monitored system with fault LED to indicate if a short or open condition is detected.Independent fault indicators for each line.The panel has a built-in mains supply and is simply installed via a fused spur 3A switched connection to a separate power supply is not required. An LED on the panel confirms that the system is powered and available for use.Up to ten of the panels can be daisy chained for larger systems without the need for any additional power source.A separate relay output enables connection to an external beacon providing the opportunity to add a remote indicator to alert staff in a different area.Full compliance to BS8300 with an acknowledge feature to reassure the caller that help is on the way both audible and visual alarms change at the point of call when acknowledge button is pressed.The system has a programmable alarm re-sound feature. This will operate if a call has been acknowledged at the control unit but is not reset at the point of call within the specified time.Space to independently label each zone for easy identification of the alarm call.Choice of a white or stainless-steel finish as standard.For ease of installation the panel fits into a standard double gang back box not supplied.

GBP 252.20
1