40 results (0,18397 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Baileigh WJT-7839HD Welding Jig Table

Baileigh WJT-7839HD Welding Jig Table

Made from 250 Cast iron the WJT-7839-HD welding jig table from Baileigh Industrial is made to withstand the rigors of any shop. All of Baileigh Industrial's welding tables are made to exact tolerances and maintain flatness of /- .0025" and have a hardness rating of 140 to 160 Brinell. \n \nThe WJT-7839-HD Welding Jig Table has a table size of 78" x 39" and has a total of 5 mourning surfaces that use Industry standard 28mm holes that are spaced at 100mm to ensure the most options with the strongest holding power. \n78 x 39 table \nMade from 250 Cast Iron with nitride coating \nBrinell Hardness 140~160 \n5 Mounting Surfaces \nExpandable \n2 ton weight capacity \nIndustry Standard 28mm Mounting holes \n100mm hole spacing \nEtched Position Marks \nIncludes table Oiler, Brush and cleaning stone

GBP 9999.99
1

Baileigh MSS-18 Shrinker/Stretcher

Baileigh MSS-18 Shrinker/Stretcher

One must have in any fabrication shop is a shrinker/stretcher. The MSS-18 is Baileigh Industrials entry level shinker/stretcher, but we take the base unit and add some kick to it, literally. Instead of having to buy an optional stand like most other seller; we include it in the price. And whats better, we made it a kick stand. Thats right; with the MSS-18 both hands will be free to handle the material. Another feature of Baileigh Industrials MSS-18 sheet metal shrinker/stretcher is that ours has one complete shrinker and one complete stretcher both in their own cast iron housings. No need to switch out jaws if you need switch functions. The heavy casting assures a quality function at full capacity, which is 18-gauge in mild steel and 16-gauge in aluminum. \n \nThe MSS-18 metal shrinker/stretcher units are constructed of cast iron to last the fabricator for years of production. Replaceable jaws can be ordered separately as needed.

GBP 1399.99
1

Baileigh CS-275EU Manual Coldsaw

Baileigh CS-275EU Manual Coldsaw

Do you do light metal fabrication or chassis building? If so the CS-275EU could be the right saw for you. This 220 volt, 50hz, single phase circular coldsaw features an 11 (279mm) blade that turns at 54rpm and has a 3.25 (83mm) round capacity at 90, big enough for just about any chassis project. \n \nThe CS-275EU is built to provide years of service, with its fully cast iron head; robust 1.5hp (1.1kw) motor, and heavy-duty vice. The vice uses a cam-lock device that allows for fast material loading and unloading, as well a second support on the opposite side of the blade to help ensure perfect cuts. The head of the CS-275EU also swivels to 45 in both the left and right directions, making this the perfect saw for various shapes and materials like pipe, angle iron, solid bar, and channel materials. \n \nLike all the EU style coldsaws from Baileigh Industrial the CS-275EU comes standard with a sturdy stand, heavy cast base, simple to use control panel, flood coolant system and material stop rod.

GBP 3599.99
1

Baileigh MPB-10 Ornamental Scroll Bender

Baileigh MPB-10 Ornamental Scroll Bender

Ever wonder how the scroll work that youve seen on decorative gates or fences ended up being so perfect. Here is your answer; Baileigh Industrials MPB-10 scroll bender is a great metal bender for any fabrication shop that is working with copper, aluminum or wrought iron. It has a very heavy cast iron frame with a large 8-1/4 round table that fits three different size scrolling attachments. This MPB-10 is a manual machine that has a heavy duty bending lever to transfer the power to the scrolling head, making the operation of this metal bender almost effortless. \n \nThis scroll bender has the capacity to bend 1-1/8 wide x 3/8 thick wrought iron for fences and gates, railings, furniture, decorative yard art and much more. This machine is great for producing radius bends and spirals. If youre looking for production or just simple projects for around the house your shop isnt complete without the MPB-10 scroll bender.

GBP 629.99
1

Baileigh BS-350SA Dual Mitering Semi-automatic Bandsaw

Baileigh BS-350SA Dual Mitering Semi-automatic Bandsaw

The BS-350SA 400v, 50hz power and has a cutting capacity of 267mm, but the best part of the BS-350SA is that is has a full cast iron head and bow can mitre 60 right and 45 left. \n \nThe BS-350SA blade motor features a 2hp motor which is driven by an AC inverter, built to deliver the reliability that shops demand. The best thing about being inverter driven is that you can make speed changes infinitely between 20mpm - 85mpm while the machine is running. Being able to change speeds helps improve blade life and give the best possible cut. Other feature of the BS-350SA that help achieve great cuts are full cast iron head and bow that are machined to exacting tolerances, precision ball bearing guides, and a large capacity flood coolant system. \n \nThe BS-350SA uses an industrial grade hydraulic system to power all semi-automatic actions. These actions include raising and lowering of the head, as well as clamping and releasing the vice. These actions are initiated with the use of a foot pedal, with settings at the control panel.

GBP 15299.99
1

Baileigh WJT-4747HD Welding Jig Table

Baileigh WJT-4747HD Welding Jig Table

Made from 250 Cast iron the WJT-4747HD welding jig table from Baileigh Industrial is made to withstand the rigors of any shop. All of Baileigh Industrial's welding tables are made to exact tolerances and maintain flatness of /- .0025" and have a hardness rating of 140 to 160 Brinell. The WJT-7839-HD Welding Jig Table has a table size of 47" x 47" and has a total of 5 mourning surfaces that use Industry standard 28mm holes that are spaced at 100mm to ensure the most options with the strongest holding power. For more information about our welding tables, contact a Toolfrance representative. \n \n \n \n 47" x 47 table \n Made from 250 Cast Iron with nitride coating \n Brinell Hardness 140~160 \n 5 Mounting Surfaces \n Expandable \n 2 ton weight capacity \n Industry Standard 28mm Mounting holes \n 100mm hole spacing \n Etched Position Marks \n Includes table Oiler, Brush and cleaning stone \n \nThe WJT-4747HD Welding Jig Table has a table size of 47" x 47" and has a total of 5 mourning surfaces that use Industry standard 28mm holes that are spaced at 100mm to ensure the most options with the strongest holding power. For more information about our welding tables, contact a Baileigh representative. \n \n47 x 47 table \nMade from 250 Cast Iron with nitride coating \nBrinell Hardness 140~160 \n5 Mounting Surfaces \nExpandable \n2 ton weight capacity \nIndustry Standard 28mm Mounting holes \n100mm hole spacing \nEtched Position Marks \nIncludes table Oiler, Brush and cleaning stone \n \n \n \nItem Number WJT-4747-HD \n \nWorking Table Size 1194mm x 1194mm (47" x 47") \n \nTable Load Capacity 2 Tons \n \nTable Height 850mm (33.5") \n \nShipping Weight 1045 lbs \n \nTable Flatness /- .0025" \n \nNumber of Mounting Surfaces 5 \n \nMounting Hole Size 28mm \n \nMounting Hole Spacing 100mm \n \nDimensions L x W x H 50" x 50" x 50" \n \n* specifications subject to change without notice.

GBP 6199.99
1

Baileigh BS-712MS - 2002063

Baileigh BS-712MS - 2002063

The BS-712MS is one of the most versatile horizontal bandsaws on the market. The design is based on the BS-712M, but with an added heavy-duty, cast iron swivel head to do its mitering instead of the vice. This feature allows for faster production times and less waste. The BS-712MS horizontal bandsaw is powered by 220 volts, 50hz, single phase, allowing it to be used just about anywhere, and much like the BS-712M It also features wheels to make it portable. In the horizontal position, the BS-712MS has a 178mm OD round, and a 178mm x 260mm rectangle capacity. \n \nLike all Baileigh Industrial band saws the BS-712MS is built from the highest quality components. The head and bow of the BS-712MS are made from heavy-duty cast iron that has been precisely machined to exacting tolerances to ensure proper alignment is maintained during the cutting process. A pair of adjustable guides attached to the heavy-duty head, along with eight sealed ball bearings to help align the blade, help increase the life of the blade. Add a chip removal brush and a flood coolant system and you have one great machine. \n \nTypically in stock in the UK for fast deliveries the BS-712MS is a great choice for your shop or for your home. To get more information on the BS-71M contact Baileigh Industrial now! \n \nReplacement bandsaw blades are readily available from Baileigh Industrial.

GBP 3699.99
1

Baileigh BS-350M Dual Mitering Bandsaw 440V

Baileigh BS-350M Dual Mitering Bandsaw 440V

Have a job that requires multiple angles in both left and right direction? If so the BS-350M horizontal band saw might just be the right choice for you. This dual mitering saw has a full cast iron head and bow that swivels 60 right and 45 left. The BS-350M has a 90 round capacity of 267mm, making this the perfect saw for almost any fabrication shop. \n \nThe BS-350M features a 3hp motor which is driven by an AC inverter built to deliver the reliability that most shops demand. \n \nThe BS-350M is built to make the straightest, highest quality cuts on the market. This is achieved through the use of the best materials, such as fully cast iron that is machined to exacting tolerances as well as precision ball bearing guides, which provide the most accurate cuts and long blade life. A full flood coolant system is also standard on the BS-350M. \n \nOperation of the BS-350M is easy as well; there are two mode of operation depending on you preference. The first option is manual descent for small production runs. The operator simply turns on the machine with a trigger switch in the descent handle, and manually guides the bandsaw blade through the material. This mode is perfect for the small or medium sized fabricators needs. The second option is to use the hydraulic descent. The hydraulic descent has a down feed adjustment for feed pressure, and is perfect for larger production runs, increases blade life and reduces operator fatigue.

GBP 11399.99
1

Baileigh DP-1000E Drill Press - 2041053

Baileigh DP-1000E Drill Press - 2041053

This economical belt driven drill press runs smoothly even at full capacity - the DP-1000E is a 15-1/2" drill press with an MT2 Taper that lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life. \n \nBelt driven head drills a maximum capacity of 1 steel. \n5 speeds in the range from 250 to 2900 rpm to suit your application. \n3-1/8" steel column eliminates flexing even when drilling at full capacity. \nRigid cast iron base and table add strength to the drills structure. \nIncludes a safety shield around the drill head to protect you. \nBaileigh backs this drill press machine with a 1-year parts warranty and lifetime technical support by phone

GBP 2499.99
1

Baileigh DP-0625E Drill Press - 2041052

Baileigh DP-0625E Drill Press - 2041052

This economical belt driven drill press runs smoothly even at full capacity - this 14" drill press lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life. \n \n.5 hp motor requires 110 volt power and will work at any shop or site. \nBelt driven head drills a maximum capacity of 5/8 steel. \n5 speeds in the range from 250 to 2900 rpm to suit your application. \n2-7/8" steel column eliminates flexing even when drilling at full capacity. \nRigid cast iron base and table add strength to the drills structure. \nIncludes a safety shield around the drill head to protect you. \nBaileigh backs this drill press machine with a 1-year parts warranty and lifetime technical support by phone

GBP 1999.99
1

Baileigh AP-3R Arbor Press - 2003873

Baileigh AP-3R Arbor Press - 2003873

The AP-3R is a 3 ton arbor press with a heavy-duty cast iron frame. \n \nThis sheet metal forming arbor press machine is a ratchet leverage machine that allows the operator to get the most leverage out of each pull of the handle using a ratchet actuator. \n \nThere is a machined 4 position bottom plate that is perfectly perpendicular to the ram that has the proper opening for most broaches to push through. \n \nThis arbor press has a solid, case hardened ram for perfect presses every time and offers years of profitable use at full capacity. All Baileigh arbor presses can be bench or pedestal mounted. The AP-3R arbor press has a 5 inch throat opening and can handle material up to 11 inches tall.

GBP 529.99
1

Baileigh SN-F16-HN Manual Corner Notcher

Baileigh SN-F16-HN Manual Corner Notcher

The SN-F16-HN manual corner notcher is a high-quality, cast iron, sheet metal notcher perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 and can notch up to 6" x 6" in one manual stroke. For your safety we have included a blade guard for protecting fingers. \n \nBecause of the high-quality components used to make the SN-F16-HN, the finished notches are extremely clean and have burr free edges. \n \nThe SN-F16-HN sheet metal notcher includes a sturdy floor stand, freeing up valuable worktop space. \n \nTake it off the stand and you have a machine that is very compact and can be easily moved from jobsite to jobsite. \n \nAdjustable guides on the oversized table allow for accurate repeatable notches.

GBP 1299.99
1

Baileigh MSS-16 Shrinker/Stretcher

Baileigh MSS-16 Shrinker/Stretcher

Most shrinker stretchers only have a small throat depth, so what do you do when you need more? Enter the Baileigh Industrial MSS-16 shrinker stretcher; it has a heavy cast iron frame with a deep 8" throat. The MSS-16 comes standard with two sets of jaws, one for shrinking and one for stretching. This bench mounted shrinker stretcher is a manually operated machine that uses a hand operated lever to control the amount of shrink or stretch. \n \nThe MSS-16 sheet metal shrinker stretcher has a mild steel capacity of 16 gauge and an aluminum capacity of 14 gauge. No other sheet metal stretcher shrinker on the market has such a generous throat depth with a heavy maximum capacity for such a good price. An optional stand that integrates a foot pedal control for operation is available.

GBP 1399.99
1

Baileigh BS-916M Bandsaw - C8A6CCBA72AF

Baileigh BS-916M Bandsaw - C8A6CCBA72AF

The BS-916M horizontal bandsaw is based on the BS-300M, but with a smaller footprint for those shops that have limited space. Like all Baileigh Industrial bandsaws the BS-916M is built to last, with a full cast iron bed and fully welded base it can take punishment. An easy to access control panel located on top of the bow makes operation on the saw a breeze. An automatic shut-off feature at the end of the cut, coolant system, and a blade tension device are also included. Baileigh Industrial designed this saw to take abuse and stay working hard for decades. \n \nThe powerful 1.5hp (1.2kw) motor is powered by 200 volt, 50hz, single phase power and features 4 blade speeds ranging from 25mpm to 72mpm. With its 8.75 round capacity at 90 the BS-916M is big enough to get most jobs done.

GBP 5999.99
1

Baileigh BS-360SA Semi-automatic Bandsaw

Baileigh BS-360SA Semi-automatic Bandsaw

Need to cut steel all day, every day? This semi-automatic horizontal band saw will save you time with its efficient hydraulic system. The cast iron bow and steel frame maintain accuracy. \n \nHuge capacity of 14 round and 14 x 22 rectangle. \n77 to 252 fpm variable blade speed. \nAccepts a standard 1.25 blade (included) to make straight, accurate cuts. \nRobust 5 hp motor runs on 400v 3-phase power. \nCast iron vise and bow, machined to exacting tolerances, ensure that cuts are as precise as possible. \nIndustrial-grade hydraulic system controls the vise and the bow height. \nFully-sealed ball bearings used as blade guides track the blade smoothly and properly. \nEasy-to-use control panelwith labeled buttons and dials for locking the vice, starting the blade, and morelets you get up and running quickly. \nPatented hydraulic blade tension device makes it easy to get the right settings. Just line up the arrow with the green fluid-filled gauge. \nElectro-welded steel frame reduces vibrations and keeps cuts accurate over many years of production. \nIncludes blade brake switch for safety. \nFlood coolant system washes away chips after cutting and helps blades last longer. \nComes with a chip removal blade brush. \nBright halogen work light gives you a clear view of what youre cutting. \nMost replacement parts are in stock for fast shipping. \nThis horizontal band saw is covered by a 2-year parts warranty. \nOur team of experienced reps provides lifetime technical support by phone. Call us whenever you need machine help or advice on an application.

GBP 29999.99
1

Baileigh RDB-25 Manual Tube Bender

Baileigh RDB-25 Manual Tube Bender

he RDB-25 manual tube bender is the perfect machine for those hobbyists that need to bend tube on a budget. It is made from a sturdy cast iron frame and can be bench or pedestal mounted. The RDB-25 from Baileigh Industrial was designed to bend the most common sizes of tubing on safe centerline radii to ensure great looking bends. \n \nThis manual tubing bender comes standard with the following round tube die sets: \n \nImperial Metric \n \n3/8" OD x 2" CLR 9.5mm OD x 51mm CLR \n \n1/2" OD x 2.25" CLR 12.7mm OD x 57mm CLR \n \n9/16" OD x 2.5" CLR 14.3mm OD x 64mm CLR \n \n5/8" OD x 3" CLR 15.8mm OD x 76mm CLR \n \n3/4" OD x 3.5" CLR 19.1mm OD x 89mm CLR \n \n7/8" OD x 4.25" CLR 22.3mm OD x 108mm CLR \n \n3/4" Square x 3.75" CLR 19.1mm Square x 95mm CLR \n \n1" Square x 4.25" CLR 25.4mm Square x 108mm CLR \n \nAlso included is a handy carry case, which allows the bender to be stored when not in use.

GBP 439.99
1

Baileigh R-M10 Manual Roll Bender

Baileigh R-M10 Manual Roll Bender

The R-M10 has been a staple in the Baileigh Industrial roll bender line since it was first introduced in 2004. This manually powered roll bender is capable of rolling full circles because of its open face design. The R-M10 can do anything that the lager models of roll benders can. The only difference is that the R-M10 has a manually powered top roll, but it does have a reduction gearbox to assist in the bending functions. \n \nThe R-M10s powerful manual drive system has a maximum capacity of 1.25 (.078 wall) round tubing capacity in mild steel. All rolling shafts on the R-M10 angle roll are hardened and turn on bronze bushings, ensuring long life and great wear characteristics. \n \nThe head is made of strong cast steel and machined to exacting tolerances. The base that comes with the machine has a useful storage cabinet for tooling and more. The R-M10 comes with segment rolls that allows for many different types of flat bar, some angle iron, and some square to be rolled. The R-M10 has many optional sizes of tooling available for tube and pipe, as well as many other profiles. \n \nThe R-M10 would be a perfect addition to any fabricating shop.

GBP 1799.99
1

Baileigh CS-315EU Manual Coldsaw

Baileigh CS-315EU Manual Coldsaw

The CS-315EU is the flagship of our EU line of coldsaws. The CS-315EU is designed to give any shop years of service without breaking the bank. The CS-315EU coldsaw is a powerful machine that can cut through solids, tubing, or pipe. The head has a strong motor coupled to a direct-drive gearbox that allows the blade to cut through the material chatter free which increases blade life. \n \nThe saw has a thick cast iron base making it very rigid. The CS-315EU includes a heavy-duty steel stand that is set at the optimal cutting height. \n \nThis is the perfect machine for small to medium fabricating shops, and best yet it requires just 220 volt, 50hz, single phase power. \n \nThe CS-315EU runs at 52rpm. Perfect for mild steel cutting, but will also handle other material with the appropriate blade. Like all other Baileigh circular coldsaws, it comes with a powerful integrated coolant pump that cools the blade and washes chips away. \n \nThe CS-315EU can mitre 45 to the left and 45 to the right. The vice has a taper lock system that helps increase production when a lot of cutting is required. \n \nThe vice on the CS-315EU coldsaw clamps on both sides of the cut increasing blade life. The vice jaws are serrated for maximum hold.

GBP 4199.99
1

Baileigh R-H150 Hydraulic Roll Bender 2000318

Baileigh R-H150 Hydraulic Roll Bender 2000318

The Baileigh R-H150 Hydraulic Roll Bender is the largest roll bender that Baileigh Industrial holds in stock. This massive machine has the capacity to roll 6.25 round tubing and 4.75 x 4.75 x 1/2 angle iron. However, it is not just the capacity that is important. The R-H150 has the ability to save time and money in your shop. Key Features: Double pinch style machine for pre-bending and post-bending Heavy-duty steel plate frame for rigidity Vertical and horizontal operation Movable operator control pendant Digital readout for roll positions Foot pedals for direction of operation Benefits: Save time and money on production runs Eliminate wasted material Tighter rolls with no gaps Increased accuracy Improved repeatability Reduced operator fatigue The R-H150 is the perfect choice for shops that need to bend large diameter tubing and angle iron. It is a versatile machine that can be used for a variety of applications, including: Manufacturing Fabrication Repair Construction Tool and die And more

GBP 77999.99
1

Baileigh CS-350EU Manual Coldsaw

Baileigh CS-350EU Manual Coldsaw

Baileigh Industrial's revolutionary CS-350EU coldsaw will change the way you think about coldsaws. The CS-350EU is a unique 350mm circular coldsaw which features a true inverter that drives the motor. This inverter allows the blade speed to be adjusted from 24rpm to 120rpm. This range of RPM covers most of the cutting applications that this coldsaw will encounter. \n \nThe CS-350EU coldsaw is a powerful machine that can cut through solids, tubing, or pipe. The head has a strong motor, coupled to a direct-drive gearbox, that allows the blade to cut through the material chatter free, increasing blade life. The CS-350EU coldsaw has a thick cast iron base, mounted on a steel stand, making it very rigid. \n \nThe Baileigh Industrial CS-350EU circular coldsaw can mitre 45 to the left and 45 to the right. The vice has a taper lock system that helps increase production when a lot of cutting is required. The vice clamps on both sides of the cut increasing blade life. The vice jaws are serrated for maximum hold. \n \nLike all other Baileigh circular coldsaws, the CS-350EU comes with a powerful coolant pump that cools the blade and washes chips away. This is the perfect machine for any fabrication shop and better yet it requires just 220 volt, single phase, 50hz power. This machine offers great value for a small price.

GBP 6499.99
1

Baileigh TN-800 Eccentric End-mill Type Tube Notcher

Baileigh TN-800 Eccentric End-mill Type Tube Notcher

If you are a shop that wants the best in tube and pipe equipment, then you have to look at the TN-800 tube and pipe notcher from Baileigh industrial. \n \nThis patented design (patent No: 6,435,783) does what no other notcher on the market can do; notch tube from 25mm to 76mm OD without having to change tooling, holesaws or mandrels. The secret is in the eccentric path that the cutter takes as it notches the tube. \n \nThis end-mill-style notcher uses a very unique design where the operator dials in the OD that they wish to notch to and the tube notcher will change its eccentric path and produce a perfect notch. \n \nThis patented feature saves the fabricator thousands of dollars every year in tooling costs. No other end mill notcher has this profitable feature. \n \nThe TN-800 is also built to last. Built in the USA using heavy duty cast iron for the main framework. This design reduces vibration and gives better results. The vice on the TN-800 is also as unique as the machine itself. It is adjustable in just about every way possible and features X and Y axis to ensure good cutting position. \n \nThe TN-800 tube and pipe notcher operates on 220 volt power so it can be run almost anywhere. The TN-800 also has a portable cart that has wheels so that when it is not in use it can be rolled out of the way.

GBP 27999.99
1

Baileigh BG-260-3 Belt Grinder Three Wheel Variable Speed

Baileigh BG-260-3 Belt Grinder Three Wheel Variable Speed

The Baileigh Industrial line of grinders just got bigger with the addition of the BG-260 belt grinder. This three wheel grinder offers all of the versatility a fabrication shop could want. Powered by 400 volt three phase power this inverter driven grinder offers variable speeds ranging from 800 to 8000 fpm, ensuring the correct speed for any application. \n \nLike all Baileigh Industrial grinders the BG-260 is built to last using only the finest quality components. The structure on the BG-260 is comprised mainly of solid cast aluminum to offer the maximum in rigidity and vibration reduction. Because of these castings, the fit and finish on the BG-260 is second to none. The BG-260 belt grinder utilizes fully sealed ball bearings to prevent against breakdowns. A unique belt tension device is also included to make belt tension changes and changing the belts a breeze. \n \nThe BG-260 offers a deeper horizontal and vertical throat depth for those larger or uncommon shaped parts. Grinding tables are also included for precise grinding. For the safety of the operator, all rotating parts on the BG-260 grinder are fully covered. \n \nThe BG-260 grinder is typically in stock for fast deliveries. If you would like more information on the BG-260 three wheel grinder. \n \n2 x 60 Three Wheel Grinding Belt \nInverter driven Variable speed \nAll cast aluminum design \n7 Diameter Contact Wheels \nQuick Change belt system \n400 volt three phase

GBP 2199.99
1

Baileigh MPS-5 Manual Throatless Guillotine

Baileigh MPS-5 Manual Throatless Guillotine

Do you need a large capacity from your throatless shear? If so then the MPS-5 from Baileigh Industrial is for you. This bench mounted shear has a mild steel capacity of 3/16". The throatless design of the MPS-5 shear makes it easy to cut large panels as well. As the operator cuts the material, the design of the cast base guides the material away from the blade. This allows the operator to keep cutting without having to trim, saving a lot of production time. \n \nBecause of its compact size, the MPS-5 throatless shear will be a great addition to any shop. Plus, it weighs in at only 70 lbs, making it very portable.

GBP 719.99
1

Baileigh HSP-200M Hydraulic Shop Press

Baileigh HSP-200M Hydraulic Shop Press

Our most powerful hydraulic shop press, the HSP-200M-HD can deliver 200 tons of pressure. A .375 cast steel framework makes this press one of the best values on the market. \n \n61.75 working width. \n11-diameter cylinder with 11.8 stroke. \n10 hp motor runs on 400-volt 3-phase power. \nStand-alone hydraulic system with a piston-style pump. \nCylinder can move left and right within the frame, ideal for off-center projects. \nPressure gauge comes standard. \nIncludes a 2-piece V-block set. \nBaileigh Industrial covers this hydraulic H-frame press with a 1-year parts warranty. \nLifetime technical support by phone means you can call our experienced team whenever you need help or project tips.

GBP 32999.99
1

Baileigh DP-12500VS-HS Variable-Speed High-Speed Drill Press

Baileigh DP-12500VS-HS Variable-Speed High-Speed Drill Press

The DP-1250VS-HS is a high-speed version of the DP-1250VS from Baileigh Industrial. The reason for the high-speed is to allow any shop to enjoy the process of thermal friction drilling. This is a unique process in which a specially designed drillbit melts the material, creating inner walls that can then be tapped. But in order to use this process, the bit must be turning more than 3000rpms. This is where the DP-1250VS-HS high-speed drill press comes in. \n \nThe DP-1250VS-HS shares all the exact same features as the DP-1500VS and would be perfect for anybody looking to upgrade their current drill. The DP-1250VS-HS from Baileigh Industrial is a 20 drill press that has a capacity of 1.25 mild steel. It uses 220 volt, single phase power to run a Delta inverter. The inverter regulates the amount of power and RPMs to the spindle. Using an inverter to drive its massive MT4 spindle gives the DP-1250VS-HS the ability to set RPMs to an exact speed; from 0rpm to 4000rpm. It also has a reverse function and can tap. \n \nThe DP-1250VS-HS uses a heavy-duty cast iron base that has a coolant system built right in. The DP-1250VS-HS also has a 4.5 wide column that was designed to minimise the flex. The worktable has been machined, polished and has T-slots for work-holding devices. \n \nOther features include an MT4 taper and chuck, a spindle safety shield with limit switch and halogen worklight. \n \nContact Baileigh Industrial today for more information on the DP-1250VS-HS high-speed drill press, or if you have question about thermal friction drilling.

GBP 7999.99
1