21 results (0,16869 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

CM-6 Chamfering Machine

CM-6 Chamfering Machine

Looking to put a really nice chamfered edge on your sheet metal without breaking the bank? The CM-6 chamfering machine from Baileigh Industrial is perfect for you. Powered by a 1.5hp (1.1kw) motor, this 220v, 50hz, single phase power benchtop machine can put a chamfer up to 6mm onto any edge. \n \nThe CM-6 has an adjustable angle of bevel that can be as little as 14 and as much as 45. This range should allow enough adjustment for just about any project. \n \nTwo perfectly machined tables hold the material perfectly while cutting, while the five bladed cutting wheel provides an extremely smooth finish. \n \nThe CM-6 from Baileigh Industrial is usually always in stock for fast delivery.

GBP 1199.99
1

Baileigh CM-50DS Double Sided Beveling Machine

Baileigh CM-50DS Double Sided Beveling Machine

The CM-50DS is a unique double sided beveling machine for steel, stainless steel, aluminum, or any other shearable material. This great metal chamfering machine is very versatile and acts like many machines built into one. \n \nHeavy Duty Plate Beveler \n \nAutomatic feeding - automatic feed speed adjustment with inverter \nHigh speed milling head with very tough inserts \n15-60 infinitely variable angle, without replacing any parts \nMaterial thickness .275 2.75 or 7 - 70 mm \nThe electrical circuits are enclosed in a dust proof box, equipped with all the safety devices necessary. \nConforms to CE regulations \n \nIncluded manipulator stand for the CM-50DS provides a simple quick 180 rotation to create double sided bevels. \n \nThe unique clamping system allows the CM-50DS to be assembled and disassembled within a few seconds, without using any tools \nThe operator does not need a crane to rotate the material. There is a significant saving of work time. \nThe stand for the CM-50DS is "floating" and can compensate for the unevenness of the floor, or the deformations of the steel plate. \nStand allows the easy manipulation of the beveller \nThe required height of the machine can be set up by an easy to use lift handle \nMovement of the machine is provided by massive wheels mounted on the carriage \n \nThe CM-50DS also includes a table for smaller material processing without sacrificing the bevel capacity. To find out more about the CM-50DS plate

GBP 31999.99
1

Baileigh PH-36A Reciprocating Hammer

Baileigh PH-36A Reciprocating Hammer

Baileigh Industrial is known worldwide for their line of metal shaping machines. The PH-36A planishing hammer is no exception. This well thought out machine is built in the USA with only the highest quality components. Everything on the PH-36A is adjustable making it the most versatile planishing hammer on the market. Even the air motor is completely rebuildable, which would allow you to change the characteristics of the hit for your application. (Call a representative for more information) \n \nFor even more versatility, add the optional dog leg bottom brace. This will open up the clearance on the bottom of the machine for those tight radii applications. \n \n16 gauge mild steel capacity \nAir operation \nIncludes filter, oiler, and footpedalu 36" throat depth \nAdjustable material opening \nTop and bottom supports have adjustable length for offset planishing \nIncludes 7 radius dies, flat, 2",3", 6", 8", 12", and 24" \nFully assembled

GBP 9999.99
1

Baileigh MH-37HD Power Hammer 2038369

Baileigh MH-37HD Power Hammer 2038369

The Baileigh MH-37HD Power Hammer is a versatile and powerful machine that can be used for a variety of metalworking tasks. It has a 3.125mm mild steel capacity, a 6.3mm aluminum capacity, and can reach speeds of up to 1500 beats per minute. The MH-37HD also has a throat depth of 1194mm, making it capable of handling large or pre-bent panels. One of the MH-37HD's most impressive features is its ability to transform itself from a rigid style machine to a spring slapping style machine. This allows the user to choose the best mode for the job at hand. For example, the rigid mode is ideal for short stroke shaping and flanging, while the spring slapping mode is better suited for aggressive shrinking and planishing. The MH-37HD also features an inverter that allows for variable speed operation. This means that the user can adjust the speed to match the material being worked and the desired outcome. The speed can be controlled either by a foot pedal or an operator panel. Another key feature of the MH-37HD is its "on the fly" stroke adjustments. This allows the user to make adjustments to the stroke length without having to stop the machine. The stroke length can be adjusted from 0.1" to 0.75". The MH-37HD is a powerful and versatile machine that is perfect for a variety of metalworking tasks. It is a great choice for shops that need a machine that can handle a variety of materials and jobs. Features: 3.125mm mild steel capacity 6.3mm aluminum capacity 1500 beats per minute 1194mm throat depth Rigid and spring slapping modes Inverter-driven variable speed operation "On the fly" stroke adjustments Benefits: Versatile and powerful Can handle a variety of materials and jobs Adjustable speed and stroke length Durable construction

GBP 131999.99
1

Baileigh CM-15DS Plate Beveler - 2006680

Baileigh CM-15DS Plate Beveler - 2006680

The latest edition to Baileigh Industrials ever growing line of plate bevelers is the CM-15DS. The unique can opener style CM-15DS uses two shear blades that rotate, like a can opener, to create welding-ready bevels on linear plates of any shearable material. Material including iron, steel (up to 85,000lbs/in or 60kg/mm2), stainless steel, brass, copper and aluminum. It cuts bevels from 3/16 to 1-9/16" (5 to 40 mm) in thickness, with a minimum plate width of 2-3/4" (70 mm) and minimum plate length of 5-7/8" (150 mm). Shown with optional stand. \n \nHeavy Duty Plate Beveler \n \n The beveling angle adjusts continuously from 15 to 50 without replacing any parts. \n The CM-15DS can be hooked to the work piece in either a horizontal or vertical position. When used with the optional extra stand, the machine can be inverted in order to bevel both the top and bottom sides of the plate. \n 180 rotation allows for creation of a double-sided bevel - no need to rotate or flip heavy material \n Assembles or disassembles in seconds without tools using a unique clamping system \n Lift handle on trolley adjusts machine to working height \n Can function as a stationary or a moveable station \n \nOptional extra manipulator stand for the CM-15DS provides a simple quick 180 rotation to create double sided bevels. \n \n The unique clamping system allows the CM-15DS to be assembled and disassembled within a few seconds without using any tools \n The operator does not need a crane to rotate the material. There is a significant saving of work time. \n The stand for the CM-15DS is "floating" and can compensate for the unevenness of the floor, or the deformations of the steel plate. \n Stand allows the easy manipulation of the beveller \n The required height of the machine can be set up by an easy to use lift handle \n Movement of the machine is provided by massive wheels mounted on the carriage

GBP 14999.99
1

Baileigh BG-379-3PH Belt Grinder

Baileigh BG-379-3PH Belt Grinder

This Baileigh Industrial BG-379 belt grinder will be at home in any industrial setting where grinding is part of the daily routine. It has three inches of useful width and is perfect for grinding castings clean, or any metal surface that needs burrs removed. The BG-379 uses 400V three phase power to run a 4 hp motor that turns a standard 3" X 79" abrasive belt at 76 x 2000 mm speeds of 2040 mpm. Because of the three phase power it will not dog under full load making it more efficient then other grinders on the market. \n \nThe BG-379 abrasive belt grinder has long lasting urethane covering on the idle wheel. While the drive wheel is made from solid billet aluminum and has a simple tracking and tensioning system that increases belt and machine life. A front removable catch basin helps keep the grinding machine clean along with a powerful 220 volt dust extraction system. The dust extraction system is a must have for any abrasive belt grinder and helps keep the machine and your shop floor clean from grinding debris. \n \nLike other Baileigh abrasive belt grinders this one is made from heavy steel that is folded and fully welded for rigidity and vibration reduction. The top guard opens up allowing for a large flat grinding surface, perfect for castings. A triangular steel base allows this abrasive belt grinder to pivot to the desired angle for best operation. \n \nBaileigh abrasive belt grinders are quality built for decades of use and are typically in stock for quick shipments.

GBP 2699.99
1

Baileigh PH-19VS Reciprocating Hammer Variable Speed

Baileigh PH-19VS Reciprocating Hammer Variable Speed

The PH-19VS takes over where the PH-19 reciprocating power hammer leaves off. By adding an inverter drive to an already potent machine, Baileigh Industrial raised the bar again. When precise speed control is needed for those delicate jobs, the PH-19VS shines. Powered by 220 volts, the PH-19VS allows the operator to control the beats per minute from 0 to 1700. The beats are controlled by either a foot pedal or a control box on the side of the machine, it is your choice. \n \nThe PH-19VS was designed from the MH-19, to give a more economical way to shape metal fast. Baileigh Industrial believes the PH-19VS is the best reciprocating power hammer on the market, bar none. It has the ability to shrink, stretch, dome, edge turn, bead, and offset with the readily available tooling. \n \nIt also has a large 19 deep throat and a tooling quick release handle which allows the operator to start working in the middle of the panel while keeping the working pressure constant. A quick release bottom tooling holder makes life on the operator easy by making tooling changes a breeze.

GBP 23499.99
1

Baileigh MSS-14H Shrinker/Stretcher

Baileigh MSS-14H Shrinker/Stretcher

Have you ever had the thought of shrinking anything more than 16 gauge mild steel, but when you try it the machine and jaws just cant quite cut it. The engineers at Baileigh Industrial had the same problem, this is when the concept for the MSS-14H hydraulic shrinker stretcher came from. The MSS-14H hydraulic shrinker stretcher is 100% made in the USA from solid plate steel and has a deep 7" throat allowing even the deepest of metal working. But the MSS-14H is unlike anything on the market to date, the MSS-14H is actually hydraulically driven by a 110 volt hydraulic system on the down stroke for great power and air pressure assisted on the upstroke for faster movement. This system allows for between 30 and 40 stokes per minute. \n \nAnother unique feature of the MSS-14H shrinker stretcher from Baileigh Industrial is the tooling. The MSS-14H comes standard with one set of four jaws; this set of jaws can do both shrinking and stretching simply by turning the jaws around and installing the correct pads. This is a hydraulic/pneumatic operated machine which is controlled by a foot pedal allowing for hands free operation. If that wasnt enough the MSS-14H has a mild steel capacity of 14 gauge and an aluminum capacity of 12 gauge.

GBP 13999.99
1

Baileigh RDB-125 Hydraulic Tube Bender

Baileigh RDB-125 Hydraulic Tube Bender

Want to upgrade from a manual to a hydraulic machine? The RDB-125 pipe bender is exactly what you're looking for. The first hydraulic tube and pipe bender in the range. This hydraulic tube and pipe bender is designed to work with all Baileigh Industrial drop on tool sets, and is constructed of only the best materials. \n \nThe RDB-125 operates much like the machine it was born from, the RDB-100, but also incorporates a hydraulic system to turn the ratchet plate and perform the bending. Requiring only 110 volts to power it, this tube and pipe bender uses powerful low pressure industrial grade hydraulics, meaning it is quiet, quick, and very safe, even when bending at full capacity. The RDB-125 has a capacity of 2.5" OD tubing, 2" OD chromalloy, 2" square tubing, and 2" schedule 40 pipe. The RDB-125 has a maximum center line of 8 (depending on the outside diameter of the material being bent). \n \nThe RDB-125 will bend to 200, allowing for true 180 bends without having to repin the die set and it only takes 4 complete pushes to reach 180. Using its built in anti-springback mechanism, the RDB-125 can retract its hydraulic cylinder without worry of losing its place in the bend. Simply retract and push again. A quick release counter die positioner is also included to make material loading and unloading a breeze.

GBP 10299.99
1

Baileigh Industrial RDB-325 Programmable Tube Bender

Baileigh Industrial RDB-325 Programmable Tube Bender

Need to put more muscle in your shop? The RDB-325 tube and pipe bender might just be your answer, with a massive capacity of 2" schedule 80 pipe (60mm x 5.5mm (mild steel T.S. 64,000 PSI) and 76mm (3") round tubing with a 16 maximum CLR, depending on your material OD. Tooling for the RDB-325 is the same high-quality tooling that our entire line of Baileigh Industrial top-loading benders use, and with over 5,000 die sets available, there will be one for your application. \n \nThe RDB-325 requires just 400 volt, 50hz, three phase power, and includes a simple to use touchscreen controller that holds up to 170 programs, with up to ten bends per program. If more memory is needed, a memory card (standard 2GB SD card, max) can be used to store programs as well. An optional indexing table can be fitted allowing the fabricator to bend on varying planes and easily duplicate complex bends. \n \nLike most of our powered rotary draw tube and pipe bending machines, this one uses a foot pedal control, and a swing away counter die system for increased production speed. Another nice feature of the RDB-325 bender is that it can rotate up to 360 in either direction, making it a great machine when using our optional universal bending plate for rod applications. \n \nThis bending machine has been designed and built to be the workhorse for any fabrication shop for decades to come.

GBP 32999.99
1

Baileigh SN-V04-MS Corner Notcher

Baileigh SN-V04-MS Corner Notcher

Ever have odd angles that you need to notch perfectly from sheet metal? Enter the SN-V04-MS. \n \nThis great machine is a 400 volt, 50hz, three phase, variable angle sheet notcher. This notcher will cut notches from 30 to 140 in mild steel up to 6mm in thickness and will do this at up to 15 strokes per minute. \n \nThe oversized 27 x 23.5 table includes table guides and mitre blocks to ensure accurate notches every time. The SN-V04-MS variable angle notcher has 8.5 long blades that are negatively raked to pull the material to the stops during the cut. \n \nThe blades can also be resharpened many times for even more life and cost savings. \n \nBlade gap is adjusted with the use of hand wheels and the notching stroke is controlled by a foot pedal.

GBP 29999.99
1

Baileigh BS-260M Dual Mitering Bandsaw

Baileigh BS-260M Dual Mitering Bandsaw

Over the years the BS-260M dual mitering band saw has gone through a number of changes. Once again we have improved it and made it even better. Gone is the day of the DC driver board to adjust the blade speed, now the BS-260M has an AC inverter for even better control and reliability, the best part is that it still is powered by only 220V, 50Hz, 1-phase single phase so it can be used just about anywhere. \n \nThe gear driven BS-260M is a 9" (229 mm) Band Saw is the perfect saw for cutting at 90 degrees or miter angles. This saw has a dual angle head capable of cutting 0-60 degrees (R) and 0-45 (L), making it one of the most versatile saws on the market. Quick releases head lock allows the operator to change the miter angle in seconds. \n \nThe BS-260M band saw is made form only the best materials for long production life. The saw bow and pivot is made from solid cast iron to ensure the straightest of cuts with little to no vibration. A total of eight precision ball bearings are provided to keep the blade in line as well. The BS-260M also has a powerful coolant system and a broken blade tensioning device that shuts down the machine if the blade breaks for safety. \n \nOperation of the BS-260M is easy as well; there are two mode of operation depending on you preference. 1- Manual descent for small production runs. The operator simply turns on the machine via a trigger switch in the descent handle, and manually guides the band saw blade through the material this mode is perfect for the small or medium sized fabricators needs. 2- Hydraulic descent for larger production runs increases blade life and reduces operator fatigue. The hydraulic descent has a down feed adjustment for feed pressure.

GBP 8999.99
1

Baileigh FE-1200 Portable Fume Extractor

Baileigh FE-1200 Portable Fume Extractor

Looking for a fume extractor that can really remove fumes at a high rate. Look no further than the Heavy Duty Portable Fume Extractor - FE-1200 from Bailegih Industrial. Fume extractors are an important part of any welding shop. They help keep the areas clean and the air the workers breathe safe. The FE-1200 fume extractor is a portable unit that has many of the feature that most shops are looking for. \n \n Includes 8" x 10' extractor arm \n 1.5 hp \n 1110 CFM \n 3 stage filter - 1. Aluminum mesh - 2. Fire resistant cartridge filter - 3. HEPA filter \n Air pulse cleaning When flow is restricted, simply shut the machine off, and press the air pulse button (requires 60-90psi air connection). An internal air tank automatically backflushes the cartridge filter, knocking off accumulated dust and debris (the debris falls into a removable pan for easy cleanout). The extractor can now be turned on and work resumed \n Portable \n Full steel construction \n CSA U.S. certified \n Tool-less filter maintance \n 220V

GBP 9299.99
1

Baileigh DC-2100C Dust Collector Cyclone

Baileigh DC-2100C Dust Collector Cyclone

The DC-2100C 3HP cyclone dust collector for sale was designed to be the best on the market with no part of the design process over looked. The 220 volt single phase 3 hp motor is designed to run all day long and stay cooler than others in the industry. The DC-2100C also uses a unique style fan to produce a whopping 2111 CFM, more than enough air flow to overcome some of the resistance that is brought on by the piping from machine to collector. It even has remote start and shut off for convenience. \n \nThe DC-2100C has a 63 gallon capacity drum, tis collector is truly designed to be used and abused. But when it is time to empty, it has quick release lever that allows the drum to slide right out. It also has casters for portability. \n \nThe DC-2100C 3HP cyclone dust collector for sale has a one micron canister to ensure that fine dust doesn't get back into the shop. Cleaning the canister is fast with a manual turn crank that allows the dust to call into a plastic bag for easy removal and disposal. \n \nPeace of mind with a 2 year warranty.

GBP 2799.99
1

Baileigh PL-1860E Economical Precision Lathe

Baileigh PL-1860E Economical Precision Lathe

If you are looking for a large tool room lathe at a good price, take a look at the Baileigh Industrial PL-1860E metal lathe. The PL-1860E has a 18 swing and 60 bed and operates on 220 volt three phase power. This is the perfect lathe for those small shops or schools that need large capacity but are on a budget. But just because it is sold at a lower price doesnt mean that is without features. \n \nThe PL-1860E is made just like all of our other metal lathes with only the best components. The massive fully cast base is built to stand up to years of use and gives great support to the main frame of the machine. All of the ways are precision ground, hardened, and then polished to ensure smooth movement. The bed is cross-ribbed for added strength and stability as well. And with 12 spindle speeds to chose from the PL-1860E has the perfect rpm for whatever you are cutting. \n \nThe PL-1860E metal working lathe includes many features not found on other machines in this price category. Things like the 2 Axis digital readout system, 8" 3-jaw universal chuck, 13 four jaw chuck, 8" back plate, coolant system, steady rest, follow rest, headstock chuck guard with micro switch, Rear Splash Guard, and halogen work light are all included.

GBP 36999.99
1

Baileigh SH-5203-HD Hydraulic Guillotine 2004230

Baileigh SH-5203-HD Hydraulic Guillotine 2004230

The SH-5203-HD from Baileigh Industrial is a heavy-duty shear that can take anything you can throw at it. The industrial-grade hydraulic system is designed to shear up to 6.5mm mild steel over its whole length of 52. Designed like the rest of the Baileigh Industrial shear line, the SH-5203-HD uses only the best components and building practices to ensure a machine that will last for decades. The frame is made from fully welded plate steel for increased rigidity and prolonged blade life. Blades can be flipped and sharpened many times saving money. Operation of the SH-5203-HD is very simple; just push the foot pedal and the hydraulic hold downs secure the material to ensure a straight cut. The blade drops and shears the material. A control panel allows for rake adjustment, jog/run/stop controls, production counter, and much more. This heavy-duty shear can be run in the jog mode, single cycle mode, or continuous cycling mode. There is also an easy to use adjustable blade gap lever that can be changed in seconds when changing thickness. A convenient shadow line position rounds out the feature list of the SH-5203-HD. 6.5mm shear capacity (mild) 1321mm shear length 16 24 strokes per minute 4 sided blades

GBP 51999.99
1

Baileigh BR-16E-36LT Bead Roller

Baileigh BR-16E-36LT Bead Roller

The BR-16E-36 bead roller from Baileigh Industrial is a machine that will change the metal forming industry. It has all the best features that fabricators want, as well as some they didnt know that the needed, until now. \n \nThe BR-16E-36 bead roller has a large 36 throat depth with integrated adjustable depth stop. The Baileigh Industrial BR-16E-36 uses an open concept working area to enable large sheets of sheet metal as well as panels with radii already in them to have beads or steps applied. The BR-16E-36 also has a unique quick release top die that maintains its forming depth. Because it maintains the correct depth of the top die, the BR-16E-36 bead roller allows the operator to begin or end a design in the middle of the panel without having to worry if the depth is set correct. Forming depth is adjusted by a large hand wheel located just above the working area so it is easily accessible for adjustment on the fly. \n \nUnlike most other bead rollers on the market, the BR-16E-36 allows the bottom die to be slid in or out depending on the offset the finished item requires, which will open up a world of possibilities in metal forming. \n \nA variable speed foot pedal controls the speed of the material feed, but can be locked in at one speed if that is what the operator chooses.

GBP 10299.99
1

Baileigh BS-350M Dual Mitering Bandsaw 440V

Baileigh BS-350M Dual Mitering Bandsaw 440V

Have a job that requires multiple angles in both left and right direction? If so the BS-350M horizontal band saw might just be the right choice for you. This dual mitering saw has a full cast iron head and bow that swivels 60 right and 45 left. The BS-350M has a 90 round capacity of 267mm, making this the perfect saw for almost any fabrication shop. \n \nThe BS-350M features a 3hp motor which is driven by an AC inverter built to deliver the reliability that most shops demand. \n \nThe BS-350M is built to make the straightest, highest quality cuts on the market. This is achieved through the use of the best materials, such as fully cast iron that is machined to exacting tolerances as well as precision ball bearing guides, which provide the most accurate cuts and long blade life. A full flood coolant system is also standard on the BS-350M. \n \nOperation of the BS-350M is easy as well; there are two mode of operation depending on you preference. The first option is manual descent for small production runs. The operator simply turns on the machine with a trigger switch in the descent handle, and manually guides the bandsaw blade through the material. This mode is perfect for the small or medium sized fabricators needs. The second option is to use the hydraulic descent. The hydraulic descent has a down feed adjustment for feed pressure, and is perfect for larger production runs, increases blade life and reduces operator fatigue.

GBP 11399.99
1

Baileigh TN-800 Eccentric End-mill Type Tube Notcher

Baileigh TN-800 Eccentric End-mill Type Tube Notcher

If you are a shop that wants the best in tube and pipe equipment, then you have to look at the TN-800 tube and pipe notcher from Baileigh industrial. \n \nThis patented design (patent No: 6,435,783) does what no other notcher on the market can do; notch tube from 25mm to 76mm OD without having to change tooling, holesaws or mandrels. The secret is in the eccentric path that the cutter takes as it notches the tube. \n \nThis end-mill-style notcher uses a very unique design where the operator dials in the OD that they wish to notch to and the tube notcher will change its eccentric path and produce a perfect notch. \n \nThis patented feature saves the fabricator thousands of dollars every year in tooling costs. No other end mill notcher has this profitable feature. \n \nThe TN-800 is also built to last. Built in the USA using heavy duty cast iron for the main framework. This design reduces vibration and gives better results. The vice on the TN-800 is also as unique as the machine itself. It is adjustable in just about every way possible and features X and Y axis to ensure good cutting position. \n \nThe TN-800 tube and pipe notcher operates on 220 volt power so it can be run almost anywhere. The TN-800 also has a portable cart that has wheels so that when it is not in use it can be rolled out of the way.

GBP 27999.99
1

Baileigh BR-16E-36 Bead Roller - 2002179

Baileigh BR-16E-36 Bead Roller - 2002179

The BR-16E-36 bead roller from Baileigh Industrial is a machine that will change the metal forming industry. It has all the best features that fabricators want, as well as some they didnt know that the needed, until now. \n \nThe BR-16E-36 bead roller has a large 36 throat depth with integrated adjustable depth stop. The Baileigh Industrial BR-16E-36 uses an open concept working area to enable large sheets of sheet metal as well as panels with radii already in them to have beads or steps applied. The BR-16E-36 also has a unique quick release top die that maintains its forming depth. Because it maintains the correct depth of the top die, the BR-16E-36 bead roller allows the operator to begin or end a design in the middle of the panel without having to worry if the depth is set correct. Forming depth is adjusted by a large hand wheel located just above the working area so it is easily accessible for adjustment on the fly. \n \nUnlike most other bead rollers on the market, the BR-16E-36 allows the bottom die to be slid in or out depending on the offset the finished item requires, which will open up a world of possibilities in metal forming. \n \nA variable speed foot pedal controls the speed of the material feed, but can be locked in at one speed if that is what the operator chooses. \n \nComes with two sets of tooling, 0.5" joggle tooling and 0.25" round bead tooling (pictured). Hundreds of other tooling options available.

GBP 12999.99
1

Baileigh RDB-350-TS Touchscreen Programmable Tube Bender

Baileigh RDB-350-TS Touchscreen Programmable Tube Bender

The true workhorse of the Baileigh Industrial line of tube and pipe benders is the RDB-350-TS. Designed and built in the USA to stand up to the rigors of production at any shop. This bender has the capacity to bend 2.5 schedule 40 pipe and up to 3 tube with a .187 wall thickness. As with all Baileigh Industrial tube and pipe benders, the RDB-350-TS accepts Baileigh Industrial's standard drop-on tooling. And if you have a unique application, Baileigh Industrial can make just about any custom tooling that your application will call for. The RDB-350-TS also features one shot bending to 360, both left and right. 180 bends can be achieved in around 16 seconds, and a quick release counter die system allows for maximum efficiency. \n \nThe RDB-350-TS has a user friendly touch-screen controller that allows the user to store up to 170 programs, with up to 10 bends per program within the memory of the controller itself, and unlimited program storage with a micro SD memory card port (standard 2GB SD card, max). The RDB-350-TS can be programmed to incorporate many variables, such as desired angle, spring back for the material, and speed of bending. Another unique feature of this pipe bender is the 320 rotation of the controllers head. This feature allows the RDB-350-TS to be operated from any location around the machine. \n \nLike all Baileigh computer controlled tube and pipe benders, the RDB-350-TS can accept a rotary positioning table. This table is available in various lengths for repeatable bends in a single piece of material. When the table is attached to the bender, it helps achieve very accurate bends on varying planes, as well as consistent measurements between bends.

GBP 46999.99
1