21 results (0,15845 seconds)

Show all filters

Brand

Colour

Show all

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Atg 44-505 MaxiCut Oil Grip 3/4 Coated Cut Glove Size 9

Atg 44-505 MaxiCut Oil Grip 3/4 Coated Cut Glove Size 9

MaxiCut Oil grip gloves that are designed for areas where there is an increased risk of cut, as well as oily and wet environments.Features and Benefits CUTtech technology blends and combines high performance fibres and yarns to impart different levels of cut protection Double dipped palm, protecting the hand from oils and hydrocarbons Reinforced thumb crotch for additional protection and extension of glove life Micro-cup grip coating enhances grip in wet and oily conditions Silicone free, reducing allergy risksTypical Applications Construction Oil and Gas Fabrication Glass Heavy engineering Rail Utilities Sheet metal handlingStandards EN 388:2016 + A1:2018 EN ISO 21420 Dexterity

GBP 20.99
1

Atg 34-504 MaxiCut Oil Grip P/C K/W Gloves Cut 5 SZ.9

Atg 34-504 MaxiCut Oil Grip P/C K/W Gloves Cut 5 SZ.9

For safe and confident handling in wet and oily environments, the MaxiCut Oil cut protection gloves keep hands safe, dry, and clean in locations where sharps are a frequent hazard. Features and Benefits CUTtech construction for high-performance cut protection Reinforced thumb crotch boosts protection in the vulnerable wear point LIQUItech technology resists oils, liquids, and chemicals for clean, dry hands DURAtech allows gloves to be laundered for a long product life ERGOtech technology for natural movement to reduce hand fatigue GRIPtech micro-cup finish allows for excellent wet and oily grip HandCare program standards guarantee cleanliness out of the packet Standards CE Category II EN 388:2016 + A1:2018 4.3.4.1.B. EN 407:2004 X.1.X.X.X.X. Approvals Oeko-Tex Standard 100 Dermatologically accredited by the Skin Health Alliance

GBP 16.39
1

Atg Cut Resistant Gloves, Indigo/Black, Size 9

Atg Cut Resistant Gloves, Indigo/Black, Size 9

MaxiCut Oil grip gloves that are designed for areas where there is an increased risk of cut, as well as oily and wet environments. Features and Benefits CUTtech technology blends and combines high performance fibres and yarns to impart different levels of cut protection Double dipped palm, protecting the hand from oils and hydrocarbons Reinforced thumb crotch for additional protection and extension of glove life Micro-cup grip coating enhances grip in wet and oily conditions Silicone free, reducing allergy risks Typical Applications Construction Oil and Gas Fabrication Glass Heavy engineering Rail Utilities Sheet metal handling Standards EN 388:2016 + A1:2018 EN ISO 21420 Dexterity

GBP 18.99
1

Atg 56-426 MaxiDry GP Palm-side Coated Purple/Black Drivers Gloves - Size 9

Atg 56-426 MaxiDry GP Palm-side Coated Purple/Black Drivers Gloves - Size 9

Manufactured from an ultra-lightweight nitrile, these dual coated grip gloves are designed to provide comfort, grip and protection in oily and dirty precision handling tasks. Features and Benefits Oil repellent to ensure you have maximum grip even when dealing with greasy materials Flexible material allows for optimum dexterity to perform tasks with ease Available in various sizes to ensure you find the right fit for your needs Typical Applications Ideal for use when performing tasks that require you to come into contact with oily, greasy or dirty objects and materials, commonly used in the following industries: Automotive Engineering Construction Standards Conforms to EN 420: 2003 + A1: 2009, EN 388: 2016 + A1: 2018, EN ISO 374-1 2016 + A1 2018, EN ISO 374-5: 2016

GBP 6.09
1

Atg 30-201 MaxiTherm Palm Coated Orange/Black Cold Resistant Gloves - Size 9

Atg 30-201 MaxiTherm Palm Coated Orange/Black Cold Resistant Gloves - Size 9

Combining comfort and thermal technology, these MaxiTherm gloves are suited for both cold and warm conditions. Possessing a patented non-slip grip to allow the gloves to perform even during wet applications, the gloves also feature a brushed liner for comfort. With a knitted elasticated cuff to hold the gloves firmly in place, an anatomical design and impressive breathability for a thermal glove. Features and Benefits Patented non-slip grip palm coating for assured handling Design maximises dexterity due to the anatomical nature of the product Flat dipping technology improves breathability of the product to prevent perspiration Soft brushed liner for maximum comfort and keeps hands warm in cold conditions Available in varying sizes to suit your requirements Typical Applications Cold Storage Transport Construction Forestry Shipping and Logistics General Handling Refuse Standards EN 388:2003 - 1241 EN 511:2006 - X1X EN 407:2004 - X2XXXX EN 388:2016 + A1:2018 - 1241B

GBP 7.99
1

Atg Drivers Style Gloves, NBR 3/4 Coated, Size 9

Atg Drivers Style Gloves, NBR 3/4 Coated, Size 9

General handling gloves with NBR coating. Features and Benefits AD-APT Cooling Technology keeps hands comfortable and cool Durable palm coating offers enhanced grip Dermatologically accredited and pre-washed prior to packaging to ensure freshness Class-leading fit form and feel, reducing hand fatigue and increasing comfort Typical Applications General handling Aerospace Dry environments Precision handling Agriculture Construction DIY Garden Light assembly Utilities Oil and gas Logistics Standards EN388:2016 4.1.3.1.A

GBP 4.29
1

Atg Cut Resistant Gloves, NBR Coated, Green/Blue, Size 9

Atg Cut Resistant Gloves, NBR Coated, Green/Blue, Size 9

These gloves combines cu protection with comfort, flexibility and dexterity and are ideally suited for wear in dry environments. Features and Benefits: Patented micro-foam nitrile coating offers 360 breathability The micro-cup finish allows for a controlled grip Mimics the 'hand at rest', reducing hand fatigue and increasing comfort Reinforcement between the thumb and forefinger improves cut resistance and extends the glove life in an inherently weak area Typical Applications: Aerospace Agriculture Utilities Horticulture Utilities Maintenance Engineering Construction

GBP 10.99
1

Atg Cut Resistant Gloves, NBR Coated, Black/Purple/Grey, Size 9

Atg Cut Resistant Gloves, NBR Coated, Black/Purple/Grey, Size 9

Tough NBR (nitrile butadiene rubber) 3/4 coated liquid repellent cut-resistant gloves. Provide wearers with protection from oils and dirt with high levels of grip in cut risk areas. Features and Benefits: Reinforcement between the thumb and forefinger improves cut resistance and extends glove life in an inherently weak area Liquid repellence is achieved through the gloves LiquiTech technology platform Knitting technology is utilised to produce smooth and rounded fingertips, improving fingertip sensitivity Typical Applications: Aerospace Agriculture Contractors Maintenance Electrical Construction

GBP 17.39
1

Atg Cut Resistant Gloves, NBR Coated, Green/Black, Size 9

Atg Cut Resistant Gloves, NBR Coated, Green/Black, Size 9

3/4 coated, oil resistant gloves gloves that are designed to provide additional grip in dirty, oily or wet conditions. The gloves also provide a moderate level of protection against mechanical risks, making them ideal when physical hazards are present. Features and Benefits: Flexible and dexterous, whilst remaining lightweight and comfortable Dermatologically-accredited and REACH-compliant gloves, which have been sanitised for improved longevity Knitting technology is utilised to product smooth and round fingertips, improving fingertip sensitivity Typical Applications: Aerospace Defence Airport security Metal work Logistics and warehousing

GBP 8.99
1

Atg 34-8753 MaxiFlex Cut 3/4 Nitrile Coated Glove Size 9

Atg 34-8753 MaxiFlex Cut 3/4 Nitrile Coated Glove Size 9

These MaxiFlex Cut 3/4 coated nitrile gloves were designed to protect the wearer from cuts in dry environments. These gloves are designed for applications with moderate cut risks.Features and Benefits Ultra-lightweight for excellent dexterity and wearer comfort 360 breathability Free from DMF and all SVHC's Thumb crotch reinforced for extended life Foam nitrile coating which is durable, offers assured grip and protection Skin Health Alliance accredited - kind to the skinTypical Applications Aerospace Automotive Fabrication General Handling Logistics Assembly work Oil and Gas Approvals Skin Health Alliance Oeko-Tex REACH Standards EN388:2016 4.3.3.1.B

GBP 7.99
1

Atg 56-425 MaxiDry GP Palm-side Coated Black/Purple Gloves - Size 9

Atg 56-425 MaxiDry GP Palm-side Coated Black/Purple Gloves - Size 9

This oil-repellent Maxi-Dry glove is an ultra-lightweight solution to working in oily and wet conditions. Designed to maintain dexterity, these gloves are ideal for precision handling tasks, with the nitrile coated palm offering comfort, grip, and hand protection against dirt and oil. Features and Benefits Silicone-free and suitable for painting industries Pre-washed prior to packaging for guaranteed fresh gloves with each new pair 3/4 coated knit wrist for maximum protection Approvals Dermatologically accredited by the Skin Health Alliance Certified bu Oeko-Tex Standards EN 388:2016 + A1:2018 4.1.2.1.A EN ISO 21420:2020 Notes Palm thickness: 1.30mm Machine washable at max. 60C

GBP 4.59
1

Atg 30-202 MaxiTherm 3/4 Coated K/W Gloves Size 9

Atg 30-202 MaxiTherm 3/4 Coated K/W Gloves Size 9

For excellent grip performance during wet applications, this thermally insulated glove features a patented non-slip coating. The brushed liner is soft and comfortable to keep the hands warm in cold conditions. Features and Benefits Anatomical design helps to reduce hand fatigue Flat dipping technology improves breathability and reduces perspiration Can withstand contact heat up to 250C Knitwrist cuff style for maximum comfort and secure fit ATG HandCare initiative for guaranteed cleanliness out of the box Standards CE Category II EN ISO 21420:2020 EN 388:2016 + A1:2018 1.2.4.1.B. EN 511:2006 X.1.X. EN 407:2004 X.2.X.X.X.X. Approvals Oeko-Tex Standard 100 Warnings Contains natural rubber latex, which may cause irritation or allergies in some users

GBP 8.99
1

Atg Cut Resistant Gloves, NBR Coated, Green/Black, Size 9

Atg Cut Resistant Gloves, NBR Coated, Green/Black, Size 9

Designed for wet and oily environments, these cut resistant gloves deliver excellent liquid repellent technology, for confident handling around sharp products and cut hazards. Features and Benefits Reinforced between the thumb and forefinger for extended glove life in an inherently weak area LIQUItech technology ensures excellent liquid repellence CUTtech innovation blends high-performance fibres for cut protection DURAtech allows gloves to be fully laundered for a longer product life ERGOtech close-fit technology for reduced hand fatigue GRIPtech micro-cup finish enhances wet and dry grip Knitting technology produces smooth, rounded fingertips, to improve sensitivity Silicone-free to prevent product contamination Part of the ATG HandCare initiative to guarantee cleanliness out of the pack Typical Applications Aerospace Agriculture Contractors Maintenance Electrical Construction Standards CE Category II EN 420:2003 + A1:2009 EN 388:2016 + A1:2018 4.3.3.1.B.

GBP 7.99
1

Atg 42-874 MaxiFlex Ultimate Palm-side Coated Grey/Black Gloves - Size 9

Atg 42-874 MaxiFlex Ultimate Palm-side Coated Grey/Black Gloves - Size 9

For precision handling, these high-quality gloves deliver excellent grip in dry working environments. Designed for comfort, the breathable micro-foam coating offers excellent breathability to keep hands at their optimal temperature so you can stay productive. Features and Benefits AIRtech technology delivers 360 moisture-wicking capacity for comfort AD-APT antiperspirant technology reduces sweat by up to 31% for dry hands Knitwrist cuff delivers maximum user comfort Silicone-free and suitable for painting and finishing applications Delivers excellent hand flexibility for reduced hand fatigue during prolonged wear Superior fingertip sensitivity for enhanced performance during precision tasks Sanitized to inhibit the growth of odour causing bacteria and germs Standards CE Category II EN 388:2003 4.1.3.1. EN 388:2016 + A1:2018 4.1.3.1.A. Approvals Skin Health Alliance Dermatologically Accredited REACH compliant Oeko-Tex 100 certified Notes Machine washable at 60C

GBP 3.99
1

Atg 34-274 MaxiFlex Elite Palm Coated K/W Gloves SZ.9

Atg 34-274 MaxiFlex Elite Palm Coated K/W Gloves SZ.9

The MaxiFlex Elite handing gloves have a coated palm and knit wrist, offering wearers enhanced comfort and increased breathability. Available in varying sizes, the nitrile coating offers protection against abrasions and cutting, whilst the breathability makes the gloves comfortable and dexterous. Features and Benefits AIRtech technology provides 360 breathability due the material that is 35% thinner than any other traditional foam gloves Ultra light weight penetration free liner utilized to produce smooth and rounded fingertips, maximizing fingertip sensitivity Form, fit and feel of the glove mimics the 'hand at rest', reducing hand fatigue and increasing comfort GRIPtech technology platform for optimised grip delivered through micro-cup finish Typical Applications Agricultural chemicals Automotive assembly and aftermarket Oil and gas Metals and Materials Handling Packaging Logistics and Transportation Standards EN 388:2003 - 4121 EN 388:2016 + A1:2018 - 4121A

GBP 4.19
1

Atg 56-530 MaxiDry Plus NBR Fullycoated Gauntlets SZ-9

Atg 56-530 MaxiDry Plus NBR Fullycoated Gauntlets SZ-9

For reliable protection against hazardous chemicals, the MaxiDry Plus gloves deliver a Controlled Performance in wet and oily environments, keeping hands free from liquids, oils, and chemicals to enable confident handling. Features and Benefits Open style cuff for easy donning and doffing GRIPtech technology gives an excellent wet and oily grip LIQUItech technology repels oils, chemicals, and liquids to keep hands safe ERGOtech technology for dexterity and natural movement for reduced hand fatigue Locking cuff design supports at the wrist to ensure the glove doesn't slip Seamless liner construction avoids seam to skin irritation for user comfort Laundered in line with ATG's HandCare program for guaranteed cleanliness Silicone-free to prevent product contamination Standards CE Category III EN 388:2016 + A1:2018 4.1.2.1.A. EN ISO 374-1:2016/Type B (J K L) EN ISO 374-5:2016 EN ISO 21420:2020 Approvals Oeko-Tex 100 Standard Dermatologically accredited by the Skin Health Alliance REACH approved

GBP 6.99
1

Atg 44-4745 MaxiCut Ultra Gloves Palm Coated Cut D (S-9)

Atg 44-4745 MaxiCut Ultra Gloves Palm Coated Cut D (S-9)

Introducing the Cut D, NBR Palm Coated Knitwrist with MicroFoam, the epitome of protection, comfort, and durability. Available in a range of sizes from 6 (XS) to 11 (XXL), these gloves combine superior cut resistance with optimal comfort for an unparalleled experience. Designed for dry environments, these gloves boast high-cut protection without compromising on breathability. The MicroFoam non-slip texture provides an optimized grip, ensuring you have full control in every task. The knitwrist adds an extra layer of security while maintaining a comfortable fit. Experience reduced hand fatigue as you tackle your tasks with confidence, knowing that these gloves offer the highest level of safety without sacrificing comfort. Long-lasting and reliable, our Cut D gloves are the ideal choice for those seeking top-notch protection without compromising on the quality of their work.Features and Benefits Cleanliness Guranteed with OEKO TEX & Skin Health Alliance certified Reduced Hand Fatigue Silicon Free Touchscreen Approved

GBP 16.99
1

12x Atg 34-800 Maxifoam Palm Coat K/W Grey Gloves Size 9

12x Atg 34-800 Maxifoam Palm Coat K/W Grey Gloves Size 9

These general-purpose gloves are ideal for a wide range of industrial tasks. The stretch liner allows for excellent freedom of movement to avoid hand fatigue, while the MaxiFoam Lite coating delivers a good grip in both wet and dry settings. Features and Benefits Coated palm and fingertips for excellent protection on these sensitive areas Knitwrist cuff allows for high levels of user comfort The rough coating finish channels oil away from the surface of the gloves Super light nitrile foam enhances user dexterity and tactility Designed to produce minimal lint and dust to avoid product contamination Seamless construction avoids seam on skin irritation for user comfort Silicone-free and suitable for painting and finishing applications Sanitized to inhibit the growth of odour causing bacteria and germs Standards CE Category II EN 388:2003 4.1.3.1. EN 388:2016 + A1:2018 4.1.2.1.A. Approvals Skin Health Alliance Dermatologically Accredited REACH Compliant Oeko-Tex 100 certified

GBP 47.88
1

Atg MaxiCut Oil 3/4 Coated Cut 3B (72) Green/Black (SIZE-9)

Atg MaxiCut Oil 3/4 Coated Cut 3B (72) Green/Black (SIZE-9)

Introducing the CUT C, NBR, 3/4 Coated Knitwrist with MicroFoam, a pinnacle of protection, comfort, and durability. Available in sizes 6 (XS) to 11 (XXL), these gloves are meticulously crafted to provide an exceptional experience for users engaged in wet and oily working environments. The 3/4 coating, made of NBR material, ensures a high level of protection against cuts while offering supreme comfort and extended durability. The MicroFoam non-slip texture takes grip to a whole new level, providing an optimized hold even in challenging conditions. These gloves are specifically designed to excel in wet working environments, boasting oil repellent properties that contribute to their longevity. Experience medium-cut protection with these gloves, perfectly tailored for tasks in wet or oily conditions. Say goodbye to hand fatigue, as these gloves have been engineered to offer reduced strain, allowing you to focus on your work with confidence. With the highest commitment to safety and comfort, our CUT C gloves deliver a superior and reliable solution for those who demand excellence in their protective gear.Features and Benefits Cleanliness Guaranteed with OEKO TEX & Skin Health Alliance certified Reduced Hand Fatigue Silicon Free Touchscreen Approved

GBP 12.99
1

Atg MaxiCut Oil Palm Coated Cut 3B 72GREEN/BLACK SZ-9

Atg MaxiCut Oil Palm Coated Cut 3B 72GREEN/BLACK SZ-9

Introducing the CUT C, NBR Palm Coated Knitwrist with MicroFoam--a pinnacle of hand protection designed for wet working environments. Available in sizes ranging from 6 (XS) to 11 (XXL), these gloves offer a perfect blend of high comfort and durability. The NBR palm coating ensures exceptional cut protection while providing supreme comfort and extended wear. The MicroFoam non-slip texture enhances grip, making these gloves essential for tasks in wet or oily conditions. Engineered to be long-lasting and equipped with oil-repellent properties, the CUT C gloves offer medium-cut protection without compromising on comfort. Say goodbye to hand fatigue as these gloves are thoughtfully crafted to reduce strain, providing wearers with the highest level of safety and comfort throughout their tasks. Choose CUT C for an unparalleled hand protection experience in demanding wet working environments.Features and Benefits OEKO TEX & Skin Health Alliance certified for guaranteed cleanliness Reduced hand fatigue for enhanced comfort during use Silicon-free for a safe and residue-free experience Touchscreen approved for convenient device use Launderable for easy and effective cleaningTypical Applications Medium cut resistance Suitable for wet and dry environments Ideal for manufacturing, engineering, and utilities Perfect for construction and rail transport Well-suited for renewable energy applications

GBP 11.99
1